| ↑ Directory of Tables and README File ↑ | |||||||||||
| Table 01 | Table 02 | Table 03 | Table 04 | Table 05 | Table 06 | Table 07 | Table 08 | Table 09 | Table 10 | Table 11 | Table 12 |
| Table 07: Table of Reverse Lookup | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| ISO | Local Name | Language | Title | SDO |
|---|---|---|---|---|
| ISO 56-2 (1979) | JIS K 5909 (1994) | Japanese | Shellac | Japan Standards Association (JSA) |
| ISO 105-B01 (1994) | EAS 243 (2001) | English | Textiles — Tests for colour fastness — Clour fastness to light: Daylight | East African Community |
| ISO 105-X11 (1994) | EAS 244 (2001) | English | Textiles — Tests for colour fastness — Colour fastness to hot pressing | East African Community |
| ISO 137 (1975) | COMESA 249 (2006) | English | Wool - Determination of fibre diameter - Projection microscope method | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 139 (2005) | EAS 240 (2001) | English | Textiles — Standard atmospheres for conditioning and testing | East African Community |
| ISO 302 (2004) | ET ISO 302.DS (2012) | English | Pulps -- Determination of Kappa number | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 535 | ISO 535 (1991) | English | Paper and Board--Determination of Water Absorptiveness--Cobb Method | American National Standards Institute (ANSI) |
| ISO 605 (1991) | ET ISO 605 (2001) | English | PULSES-DETERMINATION OF IMPURITIES, SIZE, FOREIGN ODOURS, INSECTS, ANS SPECIES AND VARIETY | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 607 (1980) | COMESA 238 (2006) | English | Surface active agents and detergents - Methods of Sample division | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 665 (2001) | ET ISO 665 (2001) | English | OILSEEDS-DETERMINATION OF MOISTURE AND VOLATILE MATTER CONTENT | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 692 (1982) | ET ISO 692 (1982) | English | Pulps -- Determination of alkali solubility | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 699 (1982) | ET ISO 699 (1982) | English | Pulps -- Determination of alkali resistance | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 707 (2008) | ET ISO 707 (2012) | English | Milk and milk products - Guidance on sampling | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 711 (1985) | ET ISO 711 (2001) | English | CEREALS AND CEREAL PRODUCTS- Determination of moisture content - Basic Reference method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 712 (1998) | ET ISO 712 (2001) | English | CEREALS AND CEREAL PRODUCTS- Determination of moisture content - Routine Reference method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 758 (1976) | EAS 213 (2001) | English | Liquid chemical products for industrial use ⎯ Determination of absolute density at 20 °C | East African Community |
| ISO 759 (1981) | EAS 214 (2001) | English | Volatile organic liquids for industrial use ⎯ Determination of dry residue after evaporation on a water bath ⎯ General method | East African Community |
| ISO 760 (1978) | EAS 215 (2001) | English | Determination of water ⎯ Karl Fischer method ⎯ General method | East African Community |
| ISO 762 (2003) | EAS 41-4 (2000) | English | Fruits, vegetables and derived products — Sampling and methods of test, Part 4: Determination of mineral impurities content | East African Community |
| ISO 776 (2011) | ET ISO 776.DS (2012) | English | Pulps -- Determination of acid-insoluble ash | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 811 (1981) | EAS 251 (2001) | English | Textile fabrics — Determination of resistance to water penetration — Hydrostatic head test | East African Community |
| ISO 920 (1976) | COMESA 256 (2006) | English | Wool - Determination of fibre length (barbe and hauteur) using a comb sorter | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 934 (1980) | ET ISO 934 (1980) | English | Animal and vegetable fats and oils -- Determination of water content -- Entrainment method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 935 (1988) | ET ISO 935 (1988) | English | Animal and vegetable fats and oils -- Determination of titre | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 1130 (1975) | COMESA 266 (2006) | English | Textile fibres - Some methods of sampling for testing | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 1136 (1976) | COMESA 250 (2006) | English | Wool- Determination of mean diameter of fibres - Air permeability method | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 1388-1 (1981) | EAS 216-1 (2001) | English | Ethanol for industrial use ⎯ Methods of test ⎯ Part 1: General | East African Community |
| ISO 1388-2 (1981) | EAS 216-2 (2001) | English | Ethanol for industrial use ⎯ Methods of test ⎯ Part 2: Detection of alkalinity or determination of acidity to phenolphtalein | East African Community |
| ISO 1388-3 (1981) | EAS 216-3 (2001) | English | Ethanol for industrial use ⎯ Methods of test ⎯ Part 3: Estimation of content of carbonyl compounds present in small amounts ⎯ Photometric method | East African Community |
| ISO 1388-4 (1981) | EAS 216-4 (2001) | English | Ethanol for industrial use ⎯ Methods of test ⎯ Part 4: Estimation of content of carbonyl compounds present in moderate amounts ⎯ Titrimetric method | East African Community |
| ISO 1388-5 (1981) | EAS 216-5 (2001) | English | Ethanol for industrial use ⎯ Methods of test ⎯ Part 5: Determination of aldehydes content ⎯ Visual calorimetric method | East African Community |
| ISO 1388-6 (1981) | EAS 216-6 (2001) | English | Ethanol for industrial use ⎯ Methods of test ⎯ Part 6: Test for miscibility with water | East African Community |
| ISO 1388-7 (1981) | EAS 216-7 (2001) | English | Ethanol for industrial use — Methods of test — Part 7: Determination of methanol content — Photometric method | East African Community |
| ISO 1388-8 (1981) | EAS 216-8 (2001) | English | Ethanol for industrial use — Methods of test — Part 8: Determination of methanol content — Visual colorimetric method | East African Community |
| ISO 1388-9 (1981) | EAS 216-9 (2001) | English | Ethanol for industrial use — Methods of test — Part 9: Determination of esters content — Titrimetric method after saponification | East African Community |
| ISO 1388-10 (1981) | EAS 216-10 (2001) | English | Ethanol for industrial use — Methods of test — Part 10: Estimation of hydrocarbons content — Distillation method | East African Community |
| ISO 1388-11 (1981) | EAS 216-11 (2001) | English | Ethanol for industrial use — Methods of test — Part 11: Test for detection of furfural | East African Community |
| ISO 1388-12 (1981) | EAS 216-12 (2001) | English | Ethanol for industrial use — Methods of test — Part 12: Determination of permanganate time | East African Community |
| ISO 1496-1 | ISO 1496-1 (1990) | English | Series 1 Freight Containers--Specification and Testing--Part 1, General Cargo Containers | American National Standards Institute (ANSI) |
| ISO 1496-3 | ISO 1496-3 (1995) | English | Series 1 Freight Containers--Specification and Testing--Part 3, Tank containers for Liquids, Gases and Pressurized Dry Bulk | American National Standards Institute (ANSI) |
| ISO 1546 (1981) | ET ISO 1546 (2012) | English | Procedure for milk recording in cows | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 1735 (2004) | ET ISO 1735 (2012) | English | Cheese and processed cheese products Determination of fat content- Gravimetric Method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 1736 (2000) | EAS 81-3 (2006) | English | Milk powders ─ Methods of analysis ─ Part 3: Determination of fat content - Gravimetric method | East African Community |
| ISO 1738 (2004) | EAS 80-4 (2006) | English | Butter ─ Methods of chemical analysis ─ Part 4: Determination of salt content | East African Community |
| ISO 1739 (1975) | EAS 80-5 (2006) | English | Butter ─ Methods of chemical analysis ─ Part 5: Determination of the refactive index of the fat | East African Community |
| ISO 1740 (2004) | EAS 80-6 (2006) | English | Butter ─ Methods of chemical analysis ─ Part 6: Determination fat acidity (Reference method) | East African Community |
| ISO 1741 (1980) | ET ISO 1741 (2004) | English | Dextrose -- Determination of loss in mass on drying -- Vacuum oven method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 1742 (1980) | ET ISO 1742 (2004) | English | Glucose Syrup - Determination of dry matter - Vacuum oven method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 1743 (1982) | ET ISO 1743 (2004) | English | Glucose Syrup - Determination of dry matter content - Refactive index method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 1833 (1077)/A1 (1980) | COMESA 251-A1 (2006) | English | Textiles - Binary fibre mixtures – Quantitative Chemical analysis : AMENDMENT 1 | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 1842 (1991) (pdf) ISO 1842 (1991) (html) | EAS 44 (2011) | English | Milled maize (corn) products – Specification | East African Community |
| ISO 1854 (2008) | ET ISO 1854 (2012) | English | Whey cheese -- Determination of fat content -- Gravimetric method (Reference method) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 1973 (1995) | COMESA 268 (2006) | English | Textile fibres - Determination of linear density - Gravimetric method and vibroscope method | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 2076 (1999) | COMESA 252 (2006) | English | Textiles — Man-made fibres — Generic names | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 2103 (1986) | ET ISO 2103 (1986) | English | Loads due to use and occupancy in residential and public buildings | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 2172 (1983) | ET ISO 2172 (2012) | English | Fruit juice -- Determination of soluble solids content -- Pycnometric method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 2299 (1973) | COMESA 210 (2006) | English/French/Russian | Sawn timber of broadleaved species — Defects — Classification | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 2394 (1998) | ET ISO 2394 (1998) | English | General principles on reliability for structures | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 2418 (2002) | COMESA 230 (2006) | English | Leather -- Chemical, physical and mechanical and fastness tests -- Sampling location | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 2419 (2002) | COMESA 231 (2006) | English | Leather -- Physical and mechanical tests -- Sample preparation and conditioning | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 2446 (1976) | EAS 164 (2006) | English | Milk — Determination of fat content (Routine method) | East African Community |
| ISO 2588 (1985) | COMESA 233 (2006) | English | Leather -- Sampling -- Number of items for a gross sample | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 2633 (1974) | ET ISO 2633 (1974) | English | Determination of imposed floor loads in production buildings and warehouses | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 2646 (1974) | COMESA 253 (2006) | English | Wool - Measurement of the length of fibres processed on the worsted System, using a fibre diagram machine | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 2647 (1973) | COMESA 270 (2006) | English | Wool - Determination of percentage of medullated fibres by the projection microscope | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 2776 (1974) | ET ISO 2776 (1974) | English | Modular co-ordination -- Co-ordinating sizes for doorsets -- External and internal | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 2821 (1974) | COMESA 232 (2006) | English | Leather -- Raw hides of cattle and horses -- Preservation by stack salting | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 2920 (2004) | ET ISO 2920 (2004) | English | Whey cheese -- Determination of dry matter (Reference method) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 2935 (1974) | JIS B 4802 (1998) | English | Circular saw blades for woodworking | Japan Standards Association (JSA) |
| ISO 2942 (2004) | GSO ISO 2942 (2011) | Arabic | Hydraulic fluid power – Filter elements – Verification of fabrication integrity and determination of the first bubble point | GCC Standardization Organization (GSO) |
| ISO 2942 (2004) | GSO ISO 2942 (2011) | English | Hydraulic fluid power – Filter elements – Verification of fabrication integrity and determination of the first bubble point | GCC Standardization Organization (GSO) |
| ISO 2962 (2010) | ET ISO 2962 (2012) | English | Cheese and processed cheese products- Determination of total phosphorus content - molecular absorption spectrometric method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 3010 (2001) | ET ISO 3010 (2001) | English | Basis for design of structures -- Seismic actions on structures | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 3060 (1974) | COMESA 271 (2006) | English | Cotton fibres - Determination of breaking tenacity of flat bundles | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 3093 (1982) | ET ISO 3093 (2001) | English | CEREALS-DETERMINATION OF FALLING NUMBER | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 3129 (1975) | EAS 273 (2002) | English | Timber — Sampling methods and general requirements for physical and mechanical tests | East African Community |
| ISO 3129 (1975) | COMESA 203 (2006) | English | Wood — Sampling methods and general requirements for physical and mechanical tests | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 3130 (1975) | EAS 272 (2002) | English | Timber — Determination of moisture content for physical and mechanical tests | East African Community |
| ISO 3133 (1975) | COMESA 204 (2006) | English | Wood — Determination of ultimate strength in static bending | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 3224-1 (1997) | GB 9745 (2008) | English | Aircraft Tyres | Standardization Administration of China (SAC) |
| ISO 3260 (1982) | ET ISO 3260 (1982) | English | Pulps -- Determination of chlorine consumption (Degree of delignification) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 3295 (1975) | JIS B 4803 (1998) | English | Bandsaw blades for woodworking | Japan Standards Association (JSA) |
| ISO 3324-1 (1997) | GB 9745 (2008) | Chinese | Aircraft tyres | Standardization Administration of China (SAC) |
| ISO 3349 (1975) | COMESA 205 (2006) | English | Wood — Determination of modulus of elasticity in static bending | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 3360 (1976) | ET ISO 3360 (1976) | English | Fishing nets -- Mounting and joining of netting -- Terms and illustrations | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 3376 (2002) | COMESA 234 (2006) | English | Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 3377-1 (2002) | COMESA 235-1 (2006) | English | Leather - Physical and mechanical tests - Determination of tear load -- Part 1: Single edge tear | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 3377-2 (2002) | COMESA 235-2 (2006) | English | Leather - Physical and mechanical tests - Determination of tear load - Part 2: Double edge tear | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 3433 (2008) | ET ISO 3433 (2012) | English | Cheese - Determination of fat content- Van guilk method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 3475 (2002) | ET ISO 3475 (2002) | English | Oil of aniseed (Pimpinella anisum L.) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 3574 (1999) | JIS G 3141 (2005) | English | Cold-reduced carbon steel sheet and strip | Japan Standards Association (JSA) |
| ISO 3596 (2000) | ET ISO 3596 (2012) | English | Animal vegetables fats and oils - Determination of unsaponitable matter - Method using diethyle ether extraction | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 3601-3 (2002) | JIS B 2408 (2005) | English | O-Rings: Quality Acceptance Criteria | Japan Standards Association (JSA) |
| ISO 3656 (2011) | ET ISO 3656 (2011) | English | Animal and vegetable fats and oils -- Determination of ultraviolet absorbance expressed as specific UV extinction | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 3706 (1976) | ET ISO 3706 (1976) | English | Phosphoric acid for industrial use (including foodstuffs) -- Determination of total phosphorus (V) oxide content -- Quinoline phosphomolybdate gravimetric method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 3707 (1976) | ET ISO 3707 (1976) | English | Phosphoric acid for industrial use (including foodstuffs) -- Determination of calcium content -- Flame atomic absorption method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 3727-1 (2001) | EAS 80-1 (2006) | English | Butter ⎯ Determination of moisture, non-fat solids and fat contents ⎯ Part 1: Determination of moisture content (Reference method) | East African Community |
| ISO 3727-2 (2001) | EAS 80-2 (2006) | English | Butter — Methods of chemical analysis ─Determination of moisture, non-fat solids and fat contents ⎯ Part 2: Determination of non-fat solids content (Reference method) | East African Community |
| ISO 3727-3 (2003) | EAS 80-3 (2006) | English | Butter — Methods of chemical analysis ─Determination of moisture, non-fat solids and fat contents ⎯ Part 3: Calculation of fat content | East African Community |
| ISO 3728 (2004) | EAS 162-3 (2006) | English | Milk and milk products — Part 3: Ice-cream and milk ice ─Determination of total solids content (Reference method) | East African Community |
| ISO 3807-2 | ISO 3807-2 (2000) | English | Cylinders for acetylene--Basic requirements--Part 2: Cylinders with fusible plugs | American National Standards Institute (ANSI) |
| ISO 3898 (1997) | ET ISO 3898 (1997) | English | Bases for design of structures -- Notations -- General symbols | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 4020 (2001) | GSO ISO 4020 (2011) | Arabic | Road vehicles – Fuel filters for diesel engines – Test methods | GCC Standardization Organization (GSO) |
| ISO 4020 (2001) | GSO ISO 4020 (2011) | English | Road vehicles – Fuel filters for diesel engines – Test methods | GCC Standardization Organization (GSO) |
| ISO 4074 (2002) | COMESA 255 (2006) | English | Natural latex rubber condoms— Requirements and test methods | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 4074 (2002)/Cor. 1 (2003) | COMESA 255-C1 (2006) | English | Natural latex rubber condoms — Requirements and test methods — TECHNICAL CORRIGENDUM 1 | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 4119 (1995) | ET ISO 4119 (1995) | English | Pulps -- Determination of stock concentration | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 4198 (1984) | COMESA 240 (2006) | English | Surface active agents - Detergents for hand dishwashing - Guide for comparative testing of performance | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 4210 (1996) | JIS D 9201 (2001) | English | Bicycles -- Method of braking test | Japan Standards Association (JSA) |
| ISO 4210 (1996) | JIS D 9201 (2001) | Japanese | Bicycles -- Method of braking test | Japan Standards Association (JSA) |
| ISO 4210 (1996) | JIS D 9301 (2010) | English | Bicycles for general use | Japan Standards Association (JSA) |
| ISO 4210 (1996) | JIS D 9301 (2010) | Japanese | Bicycles for general use | Japan Standards Association (JSA) |
| ISO 4254-1:2008 (pdf) ISO 4254-1:2008 (html) | BDS EN ISO 4254-1 (2009) | English | Agricultural machinery - Safety - Part 1: General requirements | Bulgarian Institute for Standardization (BDS) |
| ISO 4254-5:2008 (pdf) ISO 4254-5:2008 (html) | BDS EN ISO 4254-5 (2009) | English | Agricultural machinery - Safety - Part 5: Power-driven soil-working machines | Bulgarian Institute for Standardization (BDS) |
| ISO 4254-6:2009 (pdf) ISO 4254-6:2009 (html) | BDS EN ISO 4254-6 (2009) | English | Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors | Bulgarian Institute for Standardization (BDS) |
| ISO 4254-7:2008 (pdf) ISO 4254-7:2008 (html) | BDS EN ISO 4254-7 (2009) | English | Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters and cotton harvesters | Bulgarian Institute for Standardization (BDS) |
| ISO 4254-10:2009 (pdf) ISO 4254-10:2009 (html) | BDS EN ISO 4254-10 (2009) | English | Agricultural machinery - Safety - Part 10: Rotary tedders and rakes | Bulgarian Institute for Standardization (BDS) |
| ISO 4254-11:2010 | BDS EN ISO 4254-11 (2010) | English | Agricultural machinery - Safety - Part 11: Pick-up balers | Bulgarian Institute for Standardization (BDS) |
| ISO 4254-12:2012 | BDS EN ISO 4254-12 (2012) | English | Agricultural machinery - Safety - Part 12: Rotary disc and drum mowers and flail mowers | Bulgarian Institute for Standardization (BDS) |
| ISO 4317 (1991) | COMESA 241 (2006) | English | Surface-active agents and detergents - Determination of water content - Karl Fischer method | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 4325 (1990) | COMESA 243 (2006) | English | Soaps and detergents Determination of chelating agent content - Titrimetric method | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 4354 (2009) | ET ISO 4354 (2009) | English | Wind actions on structures | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 4356 (1977) | ET ISO 4356 (1977) | English | Bases for the design of structures -- Deformations of buildings at the serviceability limit states | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 4470 (1981) | EAS 274 (2002) | English | Timber — Determination of the average moisture content of a lot | East African Community |
| ISO 4570 (2002) | GB 9765 (2008) | Chinese | Tyre valve threads | Standardization Administration of China (SAC) |
| ISO 4831 (2006) | EAS 217-4 (2008) | English | Microbiology of food and animal feeding stuffs — Horizontal method for the detection and enumeration of coliforms — Part 4: Most probable number technique | East African Community |
| ISO 4832 (2006) | EAS 217-3 (2008) | English | Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of coliforms — Part 3: Colony-count technique | East African Community |
| ISO 4833 (2003) | EAS 68-1 (2006) | English | Milk and milk products — Methods of microbiological examination, Part 1: Total plate count | East African Community |
| ISO 4833 (2003) | EAS 217-2 (2008) | English | Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of microorganisms — Part 2: Colony count technique at 30o C | East African Community |
| ISO 4858 (1982) | EAS 275 (2002) | English | Timber — Determination of volumetric shrinkage | East African Community |
| ISO 4858 (1982) | COMESA 206 (2006) | English | Wood — Determination of volumetric shrinkage | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 4860 (1982) | COMESA 207 (2006) | English | Wood — Determination of volumetric swelling | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 4911 (1980) | COMESA 257 (2006) | English | Textiles - Cotton fibres - Equipment and artificial lighting for cotton classing rooms | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 4913 (1981) | COMESA 258 (2006) | English | Textiles - Cotton fibres - Determination of length (span length) and uniformity index | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 4954 (1993) | JIS G 3507-2 (2005) | English | Carbon steels for cold heading -- Part 2: Wires | Japan Standards Association (JSA) |
| ISO 5079 (1995) | COMESA 273 (2006) | English | Textile fibres - Determination of breaking force and elongation at break of individual fibres | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 5223 (1995) | ET ISO 5223 (2001) | English | TEST SIEVES FOR CEREALS | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 5263-1 (2004) | ET 5263.ISO.1.DS (2012) | English | Pulps -- Laboratory wet disintegration, Part 1: Disintegration of chemical pulps | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 5263-2 (2004) | ET 5263.ISO.2.DS (2012) | English | Pulps -- Laboratory wet disintegration, Part 2: Disintegration of mechanical pulps at 20 degrees C | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 5263-3 (2004) | ET 5263.ISO.3.DS (2012) | English | Pulps -- Laboratory wet disintegration, Part 3: Disintegration of mechanical pulps at w 85 degrees C | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 5264-1 (1979) | ET ISO 5264.1 (1979) | English | Pulps -- Laboratory beating -- Part 1: Valley beater method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 5264-2 (2011) | ET 5264.ISO.2.DS (2012) | English | Pulps -- Laboratory beating, Part 2: PFI mill method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 5267-1 (1999) | ET 5267.ISO.1.DS (2012) | English | Pulps -- Determination of Drainability, Part 1: Schopper-Riegler method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 5267-2 (2001) | ET 5267.ISO.2.DS (2012) | English | Pulps -- Determination of Drainability, Part 2: Canadian Standard freeness method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 5269-2 (2004) | ET ISO 5269.2.DS (2012) | English | Pulps -- Preparation of laboratory sheets for physical testing, Part 2: Rapid-Kothen method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 5269-3 (2008) | ET ISO 5269.3.DS (2012) | English | Pulps -- Preparation of laboratory sheets for physical testing, Part 3: Conventional and Rapid-Kothen sheet formers using a lcosed water system | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 5270 (1998) | ET ISO 5270.DS (2012) | English | Pulps -- Laboratory sheets -- Determination of physical properties | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 5351 (2010) | ET ISO 5351.DS (2012) | English | Pulps -- Determination of limiting viscosity number in cupriethylenediamine (CED) solution | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 5373 (1981) | ET ISO 5373 (2012) | English | Condensed phosphates for industrial use (including foodstuffs) - Determination of calcium content | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 5403 (2002) | COMESA 236 (2006) | English | Leather -Physical and mechanical tests - Determination of water resistance of flexible leather | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 5431 (1999) | COMESA 245 (2006) | English | Leather - Wet blue goat skins - Specification | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 5432 (1999) | COMESA 246 (2006) | English | Leather -Wet blue sheep skins - Specification | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 5433 (1999) | COMESA 247 (2006) | English | Leather - Bovine wet blue - Specification | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 5508 (1990) | ET ISO 5508 (1990) | English | Animal and vegetable fats and oils -- Analysis by gas chromatography of methyl esters of fatty acids | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 5530-1 (1997) | ET ISO 5530.1 (2005) | English | Wheat flour - Physical characteristics of doughs, Part 1:Determination of water absorption and rheological properties using a farinograph | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 5530-2 (1997) | ET ISO 5530.2 (2005) | English | Wheat flour - Physical characteristics of doughs, Part 2: Determination of water absorption and rheological properties using an extensograph | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 5530-3 (1988) | ET ISO 5530.3 (2005) | English | Wheat flour - Physical characteristics of doughs, Part 3: Determination of water absorption and rheological properties using a valiograph | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 5531 (1978) | ET ISO 5531 (2005) | English | Wheat Flour - Determination of Wet Gluten | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 5534 (2004) | ET ISO 5534 (2012) | English | Cheese and processed cheese -- Determination of the total solids content (Reference method) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 5537 (2004) | EAS 81-2 (2006) | English | Milk powders — Methods of analysis — Part 2: Determination ofmoisture content | East African Community |
| ISO 5538 (2004) | EAS 161 (2000) | English | Milk and milk products — Sampling —Inspection by attributes | East African Community |
| ISO 5538 (2004) | ET ISO 5538 (2012) | English | Milk and milk products - Sampling - Inspection by attributes | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 5541-1 (1986) | EAS 68-2-1 (2006) | English | Milk and milk products — Methods of microbiological examination Part 2-1: Enumeration of coliforms ⎯ Colony count technique at 30 degrees C | East African Community |
| ISO 5541-2 (1986) | EAS 68-2-2 (2007) | English | Milk and milk products — Methods of microbiological examination Part 2-2: Enumeration of coliforms ⎯ Most probable number technique at 30 °C | East African Community |
| ISO 5559 | GSO ISO 5559 (2009) | English | Dehydrated onion - Specification | GCC Standardization Organization (GSO) |
| ISO 5575-2 (2001) | JIS D 9421 (2009) | English | Bicycles -- Rims | Japan Standards Association (JSA) |
| ISO 5575-2 (2001) | JIS D 9421 (2009) | Japanese | Bicycles -- Rims | Japan Standards Association (JSA) |
| ISO 5674 (2004) (pdf) ISO 5674 (2004) (html) | LVS EN ISO 5674 (2009) | English | Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria | Latvijas Standarts (LVS) |
| ISO 5738 (2004) | EAS 80-8 (2006) | English | Butter ─ Methods of analysis ─ Part 8: Determination of copper content - Photometric method | East African Community |
| ISO 5738 (2004) | ET ISO 5738 (2012) | English | Milk and milk products - Determination of copper content - Photometric method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 5764 (2002) | EAS 163 (2000) | English | Milk — Determination of freezing point — Thermistor | East African Community |
| ISO 5775-1 (1997) | JIS K 6302 (2011) | English | Cycles -- Tyres | Japan Standards Association (JSA) |
| ISO 5775-1 (1997) | JIS K 6302 (2011) | Japanese | Cycles -- Tyres | Japan Standards Association (JSA) |
| ISO 5925-1 (2007) | ET ISO 5925.1 (2007) | English | Fire tests -- Smoke-control door and shutter assemblies -- Part 1: Ambient- and medium-temperature leakage tests | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6090 (2004) | EAS 160 (2000) | English | Milk and dried milk, butter milk and butter milk powder, whey, and whey powder— Determination of phosphatase activity | East African Community |
| ISO 6091 (1980) | EAS 81-4 (2006) | English | Milk powders ─ Determination of titratable acidity (Reference method) | East African Community |
| ISO 6092 (1980) | EAS 81-5 (2006) | English | Milk powders ─ Determination of titratable acidity (Routine method) | East African Community |
| ISO 6243 (1997) | ET ISO 6243 (1997) | English | Climatic data for building design -- Proposed system of symbols | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6310 (2009) | GSO ISO 6310 (2010) | Arabic | Road vehicles -- Brake linings -- Compressive strain test methods (Draft Standard) | GCC Standardization Organization (GSO) |
| ISO 6310 (2009) | GSO ISO 6310 (2010) | English | Road vehicles -- Brake linings -- Compressive strain test methods (Draft Standard) | GCC Standardization Organization (GSO) |
| ISO 6321 (2002) | EAS 319 (2002) | English | Animal and vegetable fats and oils — Determination of melting point in open capillary tubes (slip point) | East African Community |
| ISO 6321 (2002) | ET ISO 6321 (2012) | English | Animal vegetables fats and oils - Dtermination of melting point in open capillary tubes (slip point) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6322-1 (1996) | ET ISO 6322.1 (2001) | English | STORAGE OF CEREALS AND PULSES-PART 1: General recommendations for the keeping of cereals | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6322-2 (1981) | ET ISO 6322.2 (2001) | English | STORAGE OF CEREALS AND PULSES-PART 2: Essential Requirements | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6322-3 (1989) | ET ISO 6322.3 (2001) | English | STORAGE OF CEREALS AND PULSES-PART 3: Control of attack by pests | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6406 (pdf) ISO 6406 (html) | ISO 6406 (2005) | English | Seamless Steel Gas Cylinders--Inspection and Testing | American National Standards Institute (ANSI) |
| ISO 6442 (2005) | ET ISO 6442 (2005) | English | Door leaves -- General and local flatness -- Measurement method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6443 (2005) | ET ISO 6443 (2005) | English | Door leaves -- Method for measurement of height, width, thickness and squareness | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6445 (2005) | ET ISO 6445 (2005) | English | Doors -- Behaviour between two different climates -- Test method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6463 (1982) | ET ISO 6463 (2012) | English | Animal and vegetable fats and oils -- Determination of butylhydroxyanisole (BHA) and butylhydroxytoluene (BHT) -- Gas-liquid chromatographic method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6465 (2009) | GSO 2139 (2010) | Arabic | Spices - Cumin ( Cuminum cyminum L ) - Specification (Draft Standard) | GCC Standardization Organization (GSO) |
| ISO 6465 (2009) | GSO 2139 (2010) | English | Spices - Cumin ( Cuminum cyminum L ) - Specification (Draft Standard) | GCC Standardization Organization (GSO) |
| ISO 6512 (1982) | ET ISO 6512 (1982) | English | Building construction -- Modular coordination -- Storey heights and room heights | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6539 (1997) | GSO 2102 (2009) | Arabic | Cinnamon : Sri Lankan type, Seychelles type and Madagascan type (Cinnamomum zeylanicum Blume) - Specification (Draft Standard) | GCC Standardization Organization (GSO) |
| ISO 6539 (1997) | GSO 2102 (2009) | English | Cinnamon : Sri Lankan type, Seychelles type and Madagascan type (Cinnamomum zeylanicum Blume) - Specification (Draft Standard) | GCC Standardization Organization (GSO) |
| ISO 6540 (1980) | ET ISO 6540 (2001) | English | MAIZE-DETERMINATION OF MOISTURE CONTENT (on milled grains and on whole grains) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6579 (2004) | EAS 217-6 (2008) | English | Microbiology of food and animal feeding stuffs — Part 6: Horizontal method for the detection of Salmonella spp. | East African Community |
| ISO 6611 (2004) | EAS 68-4 (2006) | English | Milk and milk products — Enumeration of colony-forming units of yeasts and/or moulds — Colony-count technique at 25 °C | East African Community |
| ISO 6611 (2004) | EAS 68-3 (2007) | English | Milk and milk products — Methods of microbiological examination Part 3: Enumeration of colony-forming units of yeasts and/or moulds ⎯ Colony-count technique at 25 °C | East African Community |
| ISO 6611 (2004) | ET ISO 6611 (2012) | English | Milk and milk products - Enumeration of colony-forming units of yeasts and/or molds - Colony-count technique at 25 degrees C | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6612 (1980) | ET ISO 6612 (1980) | English | Windows and door height windows -- Wind resistance tests | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6613 (1980) | ET ISO 6613 (1980) | English | Windows and door height windows -- Air permeability test | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6633 (1984) | EAS 212 (2001) | English | Fruits and vegetables ⎯ Determination of lead content ⎯ Flameless atomic absorption spectrometric method | East African Community |
| ISO 6639-1 (1986) | ET ISO 6639.1 (2001) | English | CEREALS AND PULSES - Determination of hidden insect infestation, Part 1: General Principles | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6639-2 (1986) | ET ISO 6639.2 (2001) | English | CEREALS AND PULSES - Determination of hidden insect infestation, Part 2: Sampling | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6639-3 (1986) | ET ISO 6639.3 (2001) | English | CEREALS AND PULSES - Determination of hidden insect infestation, Part 3: Reference Method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6639-4 (1987) | ET ISO 6639.4 (2001) | English | CEREALS AND PULSES - Determination of hidden insect infestation, Part 4: Rapid Methods | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6644 (1981) | ET ISO 6644 (2001) | English | CEREALS AND MILLED CEREALS PRODUCTS-Automatic sampling by mechanical means | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6656 (2002) | ET ISO 6656 (2012) | English | Animal vegetables fats and oils - Determination of polyethylene polymers | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6731 (1989) | EAS 162-1 (2006) | English | Milk and milk products — Part 1: Milk, cream and evaporated milk | East African Community |
| ISO 6732 (1985) | EAS 80-9 (2006) | English | Butter ─ Methods of analysis ─ Part 9: Determination of iron content | East African Community |
| ISO 6732 (2010) | ET ISO 6732 (2012) | English | Milk and milk products - Determination of iron content - Spectrometric method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6734 (1989) | EAS 162-2 (2006) | English | Milk and milk products — Part 2: Sweetened condensed | East African Community |
| ISO 6735 (1985) | EAS 81─7 (2006) | English | Milk powders - Assessment of heat class - Heat-number | East African Community |
| ISO 6741-2 (1987) | COMESA 260-2 (2006) | English | Textiles - Fibres and yarns - Determination of commercial mass of consignments - Part 2 : Methods for obtaining laboratory samples | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 6741-3 (1987) | COMESA 260-3 (2006) | English | Textiles - Fibres and yarns - Determination of commercial mass of consignments - Part 3: Specimen cleaning procedures | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 6742-1 (1987) | JIS C 9502 (2008) | English | Lighting equipment for bicycles | Japan Standards Association (JSA) |
| ISO 6742-1 (1987) | JIS C 9502 (2008) | Japanese | Lighting equipment for bicycles | Japan Standards Association (JSA) |
| ISO 6800 (1997) | ET ISO 6800 (1997) | English | Animal and vegetable fats and oils -- Determination of the composition of fatty acids in the 2-position of the triglyceride molecules | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6800 (1997) | ET ISO 6800 (2012) | English | Animal vegetables fats and oils - Determination of unsaponitable matter - Method using diethyle ether extraction | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6883 (2000) | EAS 316 (2002) | English | Animal and vegetable fats and oils — Determination of conventional mass per volume (litre weight in air) | East African Community |
| ISO 6883 (2007) | ET ISO 6883 (2012) | English | Animal vegetables fats and oils - Determination of conventional mass per volume (litre weight in air) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6885 (2006) | ET ISO 6885 (2012) | English | Animal vegetables fats and oils - Determination of anisidine value | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6886 (2006) | ET ISO 6886 (2012) | English | Animal vegetables fats and oils - Determination of oxidative stability (accelerated oxidation test) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 6887-1 (1999) | EAS 217-1-2 (2008) | English | Microbiology of food and animal feeding stuffs — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Part 1-2: General rules for the preparation of the initial suspension and decimal dilutions | East African Community |
| ISO 6887-2 (2003) | EAS 217-1-3 (2008) | English | Microbiology of food and animal feeding stuffs — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Part 1-3: Specific rules for the preparation of meat and meat products | East African Community |
| ISO 6887-3 (2003) | EAS 217-1-4 (2008) | English | Microbiology of food and animal feeding stuffs — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Part 1-4: Specific rules for the preparation of fish and fishery products | East African Community |
| ISO 6887-4 (2004) | EAS 217-1-5 (2008) | English | Microbiology of food and animal feeding stuffs — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Part 1-5: Specific rules for the preparation of products other than milk and milk products, meat and meat products, and fish and fishery products | East African Community |
| ISO 6938 (1984) | COMESA 261 (2006) | English | Textiles - Natural fibres - Generic names and definitions | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 6989 (1981) | COMESA 274 (2006) | English | Textile fibres - Determination of length and length distribution of staple fibres (by measurement of Single fibres) | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 7208 (2008) | ET ISO 7208 (2012) | English | Skimmed milk, whey and buttermilk - Determination of fat content - Gravimetric method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 7225 | ISO 7225 (2005) | English | Gas Cylinders--Precautionary Labels | American National Standards Institute (ANSI) |
| ISO 7238 (2004) | EAS 80-7 (2006) | English | Butter ─ Methods of chemical analysis ─ Part 7: Determination of pH of the serum - Potentiometric method | East African Community |
| ISO 7250 (1996) | JIS Z 8500 (2002) | English | Ergonomics -- Basic human body measurements for technological design | Japan Standards Association (JSA) |
| ISO 7250 (1996) | JIS Z 8500 (2002) | Japanese | Ergonomics -- Basic human body measurements for technological design | Japan Standards Association (JSA) |
| ISO 7301 (1988) | ET ISO 7301 (2001) | English | RICE-SPECIFICATION | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 7361 (1986) | ET ISO 7361 (1986) | English | Performance standards in building -- Presentation of performance levels of facades made of same-source components | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 7366 (1987) | ET ISO 7366 (1987) | English | Animal and vegetable fats and oils -- Determination of 1-monoglycerides and free glycerol contents | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 7386 (1984) | GSO 2136 (2010) | Arabic | Aniseed (Pimpinella anisum Linnaeus) – Specification (Draft Standard) | GCC Standardization Organization (GSO) |
| ISO 7386 (1984) | GSO 2136 (2010) | English | Aniseed (Pimpinella anisum Linnaeus) – Specification (Draft Standard) | GCC Standardization Organization (GSO) |
| ISO 7495 (1990) | ET ISO 7495 (2005) | English | Wheat flour - Determination of wet gluten content by mechanical means | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 7535 (1984) | COMESA 242 (2006) | English | Surface active agents -Detergents for domestic machine dishwashing – Guide for comparative testing of performance | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 7586 (1985) | ET ISO 7586 (2012) | English | Butter- Determination of water dispersion value | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 7771 (1985) | EAS 242 (2001) | English | Textiles — Determination of dimensional changes of fabrics induced by cold-water immersion | East African Community |
| ISO 7847 (1987) | ET ISO 7847 (1987) | English | Animal and vegetable fats and oils -- Determination of polyunsaturated fatty acids with a cis,cis 1,4-diene structure | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 7859 (2000) | GB 16486 (2008) | Chinese | The limits and measurement methods of fuel consumption for mopeds | Standardization Administration of China (SAC) |
| ISO 7859 (2000) | GB 16486 (2008) | English | Limits and measurement methods of fuel consumption for mopeds | Standardization Administration of China (SAC) |
| ISO 7860 (1995) | GB 15744 (2008) | Chinese | The limits and measurement methods of fuel consumption for motorcycles | Standardization Administration of China (SAC) |
| ISO 7866 | ISO 7866 (1999) | English | Gas Cylinders--Refillable Seamless Aluminum Alloy Gas Cylinders--Design, Construction and Testing | American National Standards Institute (ANSI) |
| ISO 7892 (1988) | ET ISO 7892 (1988) | English | Vertical building elements -- Impact resistance tests -- Impact bodies and general test procedures | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 7927-1 (1987) | GSO 2135 (2010) | Arabic | Spices and condiments – Fennel seed, whole or ground (powdered) -- Part 1: Bitter fennel seed (Foeniculum vulgare P. Miller var. vulgare) - Specification (Draft Standard) | GCC Standardization Organization (GSO) |
| ISO 7927-1 (1987) | GSO 2135 (2010) | English | Spices and condiments – Fennel seed, whole or ground (powdered) -- Part 1: Bitter fennel seed (Foeniculum vulgare P. Miller var. vulgare) - Specification (Draft Standard) | GCC Standardization Organization (GSO) |
| ISO 7954 (1987) | EAS 217-8 (2008) | English | Microbiology of food and animal feeding stuffs — General guidance for enumeration of yeasts and moulds — Part 8: Colony count technique at 25 degrees C | East African Community |
| ISO 7957 (1987) | JIS B 6508-2 (1999) | Japanese | Woodworking machines -- Circular sawing machines -- Part 2: Nomenclature and acceptance conditions of radial circular saws | Japan Standards Association (JSA) |
| ISO 7971 (1986) | ET ISO 7971 (2001) | English | CEREALS-DETERMINATION OF BULK DENSITY (REFERENCE METHOD) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 7984 (1987) | JIS B 6508-3 (1999) | Japanese | Woodworking machines -- Circular sawing machines -- Part 3: Nomenclature and acceptance conditions of single blade stroke circular sawing machines for lengthwise cutting of solid woods and panels | Japan Standards Association (JSA) |
| ISO 8098 (2002) | JIS D 9302 (2008) | English | Bicycles for young children | Japan Standards Association (JSA) |
| ISO 8098 (2002) | JIS D 9302 (2008) | Japanese | Bicycles for young children | Japan Standards Association (JSA) |
| ISO 8115 | ISO 8115 (1986) | English | Cotton bales—Dimensions and density | American National Standards Institute (ANSI) |
| ISO 8115-2 (1994) | COMESA 262-2 (2006) | English | Bales - Part 2: Bales of man-made staple fibres - Dimensions | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 8124-1 (2000) | AS-NZS 8124-1 (2002) | English | Safety of toys - Part 1: Safety aspects related to mechanical and physical properties | Standards New Zealand |
| ISO 8124-3 (2010) | AS-NZS 8124-3 (2012) | English | Safety of toys - Part 3: Migration of certain elements | Standards New Zealand |
| ISO 8128-1 (1993) | ET ISO 8128.1 (2012) | English | Apple juice, apple juice concentrates and drinks containing apple juice - Determination of patulin content, Part 1: Method using high-performance liquid chromatography | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 8128-2 (1993) | ET ISO 8128.2 (2012) | English | Apple juice, apple juice concentrates and drinks containing apple juice - Determination of patulin content, Part 2: Method using a thin layer chromatography | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 8156 (2005) | EAS 81-6 (2006) | English | Milk powders — Determination of insolubility index | East African Community |
| ISO 8159 (1987) | COMESA 263 (2006) | English/French | Textiles -Morphology of fibres and yarns - Vocabulary | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 8197 (1988) | EAS 165 (2006) | English | Milk and milk products — Sampling — Inspection by | East African Community |
| ISO 8197 (1988) | ET ISO 8197 (2012) | English | Milk and milk products - Sampling - Inspection by variables | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 8248 (1985) | ET ISO 8248 (1985) | English | Windows and door height windows -- Mechanical tests | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 8260 (2008) | ET ISO 8260 (2012) | English | Milk and milk products - Determination of organochlorine pesticides and polychlorobiphenyls - Method using capillary gas-liquid chromatography | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 8271 (2005) | ET ISO 8271 (2005) | English | Door leaves -- Determination of the resistance to hard body impact | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 8272 (1985) | ET ISO 8272 (1985) | English | Doorsets -- Air permeability test | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 8273 (1985) | ET ISO 8273 (1985) | English | Doors and doorsets -- Standard atmospheres for testing the performance of doors and doorsets placed between different climates | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 8275 (1985) | ET ISO 8275 (1985) | English | Doorsets -- Vertical load test | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 8292-1 (2008) | ET ISO 8292.1 (2012) | English | Animal vegetables fats and oils - Determination of solid fat content by pulsed NMR, Part 1: Direct Method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 8292-2 (2008) | ET ISO 8292.2 (2012) | English | Animal vegetables fats and oils - Determination of solid fat content by pulsed NMR, Part 2: Indirect Method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 8294 (1994) | ET ISO 8294 (1994) | English | Animal and vegetable fats and oils -- Determination of copper, iron and nickel contents -- Graphite furnace atomic absorption method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 8420 (2002) | ET ISO 8420 (2012) | English | Animal vegetables fats and oils - Determination of content of polar compounds | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 8528-1 (2005) | COMESA 287-1 (2007) | English | Reciprocating internal combustion engine driven alternating current generating sets — Part 1: Application, ratings and performance | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 8528-2 (2005) | COMESA 287-2 (2007) | English | Reciprocating internal combustion engine driven alternating current generating sets — Part 2: Engines | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 8528-3 (2005) | COMESA 287-3 (2007) | English | Reciprocating internal combustion engine driven alternating current generating sets — Part 3: Alternating current generators for generating sets | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 8528-4 (2005) | COMESA 287-4 (2007) | English | Reciprocating internal combustion engine driven alternating current generating sets — Part 4: Controlgear and switchgear | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 8528-5 (2005) | COMESA 287-5 (2007) | English | Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 8528-6 (2005) | COMESA 287-6 (2007) | English | Reciprocating internal combustion engine driven alternating current generating sets — Part 6: Test methods | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 8528-7 (1994) | COMESA 287-7 (2007) | English | Reciprocating internal combustion engine driven alternating current generating sets — Part 7: Technical declarations for specification and design | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 8528-8 (1995) | COMESA 287-8 (2007) | English | Reciprocating internal combustion engine driven alternating current generating sets — Part 8: Requirements and tests for low-power generating sets | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 8528-9 (1995) | COMESA 287-9 (2007) | English | Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 8528-10 (1998) | COMESA 287-10 (2007) | English | Reciprocating internal combustion engine driven alternating current generating sets — Part 10: Measurement of airborne noise by the enveloping surface method | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 8528-12 (1997) | COMESA 287-12 (2007) | English | Reciprocating internal combustion engine driven alternating current generating sets — Part 12: Emergency power supplies to safety services | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 8534 (2008) | ET ISO 8534 (2012) | English | Animal vegetables fats and oils - Determination of water content - Karl Fisher method (pyridine free) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 8611-1 (2004) | COMESA 216 (2006) | English | Pallets for materials handling — Flat pallets — Part 1: Test methods | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 8611-2 (2005) | COMESA 217 (2006) | English | Pallets for materials handling — Flat pallets — Part 2: Performance requirements and selection of tests | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 8611-3 (2005) | COMESA 218 (2006) | English | Pallets for materials handling — Flat pallets — Part 3: Maximum working loads | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 8769 (1988) | JIS Z 4334 (2005) | English | Reference sources for the calibration of surface contamination monitors -- Beta-emitters (maximum beta energy greater than 0.15 MeV) and alpha-emitters | Japan Standards Association (JSA) |
| ISO 8769 (1988) | JIS Z 4334 (2005) | Japanese | Reference sources for the calibration of surface contamination monitors -- Beta-emitters (maximum beta energy greater than 0.15 MeV) and alpha-emitters | Japan Standards Association (JSA) |
| ISO 8870 (2006) | ET ISO 8870 (2012) | English | Milk and milk-based products - Detection of thermonuclease produced by coagulase-positive staphylococci | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 8904 (1990) | COMESA 201 (2006) | English | Broadleaved sawn timber — Sizes — Methods of measurement | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 8905 (1988) | COMESA 202 (2006) | English | Sawn timber — Test methods — Determination of ultimate strength in shearing parallel to grain | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 8930 (1987) | ET ISO 8930 (1987) | English | General principles on reliability for structures -- List of equivalent terms | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 8980-4 (2006) | GB 10810.4 (2012) | Chinese | Uncut finished spectacle lenses Part 4: Specifications and test methods for anti-reflective coatings | Standardization Administration of China (SAC) |
| ISO 8989 (1995) | JIS K 6807 (1999) | Japanese | Test methods for formaldehyde resin liquid adhesives for wood | Japan Standards Association (JSA) |
| ISO 8995-3 (2006) | JIS Z 9126 (2010) | English | Lighting of outdoor work places | Japan Standards Association (JSA) |
| ISO 8995-3 (2006) | JIS Z 9126 (2010) | Japanese | Lighting of outdoor work places | Japan Standards Association (JSA) |
| ISO 9050 (2003) | ET ISO 9050 (2003) | English | Glass in building -- Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 9051 (2001) | ET ISO 9051 (2001) | English | Glass in building -- Fire-resistant glazed assemblies containing transparent or translucent glass, for use in building | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 9086-1 (1987) | COMESA 208 (2006) | English/French/Russian | Wood — Methods of physical and mechanical testing — Vocabulary — Part 1: General concepts and macrostructure | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 9194 (1987) | ET ISO 9194 (1987) | English | Bases for design of structures -- Actions due to the self-weight of structures, non-structural elements and stored materials -- Density | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 9197-1 (2006) | ET ISO 9197.1.DS (2012) | English | Paper, board and pulps -- Determination of water-soluble chlorides | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 9202 (1991) | GB 11887 (2008) | Chinese | Jewellery--Fineness of precious metal alloys and designation | Standardization Administration of China (SAC) |
| ISO 9231 (2008) | ET ISO 9231 (2012) | English | Milk and milk products - Determination of the benzoic and sorbic acid contents | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 9241-3 (1992) | JIS Z 8513 (1994) | English | Ergonomics -- Office work with visual display terminals (VDTs) -- Visual display requirements | Japan Standards Association (JSA) |
| ISO 9241-3 (1992) | JIS Z 8513 (1994) | Japanese | Ergonomics -- Office work with visual display terminals (VDTs) -- Visual display requirements | Japan Standards Association (JSA) |
| ISO 9241-3 (2000) | JIS Z 8513 (2006) | English | Ergonomics -- Office work with visual display terminals (VDTs) -- Visual display requirements | Japan Standards Association (JSA) |
| ISO 9241-3 (2000) | JIS Z 8513 (2006) | Japanese | Ergonomics -- Office work with visual display terminals (VDTs) -- Visual display requirements | Japan Standards Association (JSA) |
| ISO 9329-1 (1989) | GB 3087 (2008) | English | Seamless steel tubes for low and medium pressure boiler | Standardization Administration of China (SAC) |
| ISO 9379 (2005) | ET ISO 9379 (2005) | English | Operating forces -- Test method -- Doors | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 9380 (1990) | ET ISO 9380 (1990) | English | Doorsets -- Repeated torsion test | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 9381 (2005) | ET ISO 9381 (2005) | English | Hinged or pivoted doors -- Determination of the resistance to static torsion | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 9413 (1998) | GB 1796.1 (2008) | Chinese | Tyre valves -Part 1:Clamp-in valves | Standardization Administration of China (SAC) |
| ISO 9413 (1998) | GB 1796.2 (2008) | Chinese | Tyre valves Part 2:Rubber base valves | Standardization Administration of China (SAC) |
| ISO 9413 (1998) | GB 1796.6 (2008) | Chinese | Tyre valves, Part 6: Cores | Standardization Administration of China (SAC) |
| ISO 9709 (2005) | COMESA 213 (2006) | English | Structural timber — Visual strength grading — Basic principles | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 9801 (1997) | GB 17342 (2009) | Chinese | Ophthalmic instrument-Trial case lenses | Standardization Administration of China (SAC) |
| ISO 9809-1 | ISO 9809-1 (1999) | English | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 1: Quenched and Tempered Steel Cylinders with Tensile Strength less than 1 100 MPa | American National Standards Institute (ANSI) |
| ISO 9809-2 | ISO 9809-2 (2000) | English | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 2: Quenched and Tempered Steel Cylinders with Tensile Strength Greater than or Equal to 1 100 MPa | American National Standards Institute (ANSI) |
| ISO 9809-3 | ISO 9809-3 (2000) | English | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 3: Normalized Steel Cylinders | American National Standards Institute (ANSI) |
| ISO 9832 (2002) | ET ISO 9832 (2012) | English | Animal vegetables fats and oils - Determination of residual technical hexane content | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 9936 (2006) | ET ISO 9936 (2012) | English | Animal vegetables fats and oils - Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 9978 | ISO 9978 (1992) | English | Sealed Radioactive Sources--Leak Test Methods | American National Standards Institute (ANSI) |
| ISO 9994 (2008) | DIN EN ISO 9994 (2008) | English | Lighters - Safety specification | Deutsches Institut für Normung (DIN) |
| ISO 10075 (1991) | JIS Z 8502 (1994) | English | Ergonomic principles related to mental work-load -- General terms and definitions | Japan Standards Association (JSA) |
| ISO 10075 (1991) | JIS Z 8502 (1994) | Japanese | Ergonomic principles related to mental work-load -- General terms and definitions | Japan Standards Association (JSA) |
| ISO 10077-1 (2006) | ET ISO 10077.1 (2006) | English | Thermal performance of windows, doors and shutters -- Calculation of thermal transmittance -- Part 1: General | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 10077-2 (2012) | ET ISO 10077.2 (2012) | English | Thermal performance of windows, doors and shutters -- Calculation of thermal transmittance -- Part 2: Numerical method for frames | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 10137 (2007) | ET ISO 10137 (2007) | English | Bases for design of structures - Serviceability of buildings and walkways against vibrations | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 10291 (1994) | ET ISO 10291 (1994) | English | Glass in building -- Determination of steady-state U values (thermal transmittance) of multiple glazing -- Guarded hot plate method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 10292 (1994) | ET ISO 10292 (1994) | English | Glass in building -- Calculation of steady-state U values (thermal transmittance) of multiple glazing | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 10297 | ISO 10297 (1999) | English | Gas cylinders--Refillable gas cylinder valves--Specification and type testing | American National Standards Institute (ANSI) |
| ISO 10306 (1993) | COMESA 264 (2006) | English | Textiles - Cotton fibres - Evaluation of maturity by the air flow method | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 10376 (2011) | ET ISO 10376.DS (2012) | English | Pulps -- Determination of mass fraction of fines | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 10461 (pdf) ISO 10461 (html) | ISO 10461 (2005) | English | Seamless Aluminum Alloy Gas Cylinders--Inspection and Testing | American National Standards Institute (ANSI) |
| ISO 10462 (pdf) ISO 10462 (html) | ISO 10462 (2005) | English | Transportable Cylinders for Dissolved Acetylene | American National Standards Institute (ANSI) |
| ISO 10523 (1994) (pdf) ISO 10523 (1994) (html) | SANS 5011 (2005) | English | Water quality - Determination of pH | South African Bureau of Standards |
| ISO 10535 (1998) | JIS T 9241-2 (2008) | English | Hoists for the transfer of persons with disabilities -- Part 2: Mobile hoist | Japan Standards Association (JSA) |
| ISO 10535 (1998) | JIS T 9241-2 (2008) | Japanese | Hoists for the transfer of persons with disabilities -- Part 2: Mobile hoist | Japan Standards Association (JSA) |
| ISO 10539 (2002) | EAS 318 (2002) | English | Animal and vegetable fats and oils — Determination of soap content | East African Community |
| ISO 10539 (2002) | ET ISO 10539 (2012) | English | Animal vegetables fats and oils - Determination of alkalinity | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 10540-1 (2003) | ET ISO 10540.1 (2012) | English | Animal vegetables fats and oils - Determination of phosphorus content, Part 1: Colorimetric method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 10540-2 (2003) | ET ISO 10540.2 (2012) | English | Animal vegetables fats and oils - Determination of phosphorus content, Part 2: Method using graphic furnace atomic absorption spectrometry | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 10540-3 (2002) | ET ISO 10540.3 (2012) | English | Animal vegetables fats and oils - Determination of phosphorus content, Part 3: Method using inductively coupled plasma (ICP) optical emission spectroscopy | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 10621 (1997) | GSO ISO 10621 (2009) | English | Dehydrated green pepper - Specification | GCC Standardization Organization (GSO) |
| ISO 10648-2 (1994) | JIS Z 4808 (2002) | English | Glove box for handling of radioactive substance | Japan Standards Association (JSA) |
| ISO 10648-2 (1994) | JIS Z 4808 (2002) | Japanese | Glove box for handling of radioactive substance | Japan Standards Association (JSA) |
| ISO 10932 (2010) | ET ISO 10932 (2012) | English | Milk and milk products - Determination of the minimal inhibitory concentration (MIC) of antibiotics applicable to bifidobacteria and non-enterococcal lactic acid bacteria | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 10933 (1997) | GB 15558.3 (2008) | Chinese | Buried polyethylene（PE）piping systems for the supply of gaseous fuels－Part 3: Valves | Standardization Administration of China (SAC) |
| ISO 10993-1 (2009) | I.S. EN ISO 10993-1 (2009) | English | Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process | National Standards Authority of Ireland (NSAI) |
| ISO 10993-4 (2006) | I.S. EN ISO 10993-4 (2009) | English | Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood | National Standards Authority of Ireland (NSAI) |
| ISO 10993-5 (2009) | I.S. EN ISO 10993-5 (2009) | English | Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity | National Standards Authority of Ireland (NSAI) |
| ISO 10993-6 (2007) | I.S. EN ISO 10993-6 (2009) | English | Biological evaluation of medical devices - Part 6: Tests for local effects after implantation | National Standards Authority of Ireland (NSAI) |
| ISO 10993-7 (2008) | I.S. EN ISO 10993-7 (2008) | English | Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals | National Standards Authority of Ireland (NSAI) |
| ISO 10993-9 (2009) | I.S. EN ISO 10993-9 (2009) | English | Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products | National Standards Authority of Ireland (NSAI) |
| ISO 10993-11 (2006) | I.S. EN ISO 10993-11 (2009) | English | Biological evaluation of medical devices - Part 11: Tests for systemic toxicity | National Standards Authority of Ireland (NSAI) |
| ISO 10993-12 (2007) | I.S. EN ISO 10993-12 (2012) | English | Biological evaluation of medical devices - Part 12: Sample preparation and reference materials | National Standards Authority of Ireland (NSAI) |
| ISO 10993-13 (2010) | I.S. EN ISO 10993-13 (2010) | English | Biological evaluation of medical devices - Part 13: Identification and quantification of degradation products from polymeric medical devices | National Standards Authority of Ireland (NSAI) |
| ISO 10993-16 (2010) | I.S. EN ISO 10993-16 (2010) | English | Biological evaluation of medical devices - Part 16: Toxicokinetic study design for degradation products and leachables | National Standards Authority of Ireland (NSAI) |
| ISO 10993-17 (2002) | I.S. EN ISO 10993-17 (2009) | English | Biological evaluation of medical devices - Part 17: Establishment of allowable limits for leachable substances | National Standards Authority of Ireland (NSAI) |
| ISO 10993-18 (2005) | I.S. EN ISO 10993-18 (2009) | English | Biological evaluation of medical devices - Part 18: Chemical characterization of materials | National Standards Authority of Ireland (NSAI) |
| ISO 11053 (2009) | ET ISO 11053 (2012) | English | Vegetable fats and oils - Determination of cocoa butter equivalents in milk chocolate | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 11107 | UNI ISO 11107 (2010) | English | Recreational diving services - Requirements for training programmes on enriched air nitrox (EAN) diving | Ente Nazionale Italiano di Unificazione (UNI) |
| ISO 11114-1 | ISO 11114-1 (1997) | English | Transportable gas cylinders--Compatibility of cylinder and valve materials with gas contents--Part 1: Metallic materials | American National Standards Institute (ANSI) |
| ISO 11114-2 | ISO 11114-2 (2000) | English | Transportable gas cylinders-- Compatibility of cylinder and valve materials with gas contents--Part 2: Non- metallic materials | American National Standards Institute (ANSI) |
| ISO 11117 | ISO 11117 (1998) | English | Gas cylinders--Valve protection caps and valve guards for industrial and medical gas cylinders--Design, construction and tests | American National Standards Institute (ANSI) |
| ISO 11118 | ISO 11118 (1999) | English | Gas cylinders--Non-refillable metallic gas cylinders--Specification and test methods | American National Standards Institute (ANSI) |
| ISO 11119-1 | ISO 11119-1 (2002) | English | Gas cylinders--Gas cylinders of composite construction--Specification and test methods--Part 1: Hoop-wrapped composite gas cylinders | American National Standards Institute (ANSI) |
| ISO 11119-2 | ISO 11119-2 (2002) | English | Gas cylinders—Gas cylinders of composite construction—Specification and test methods—Part 2: Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners | American National Standards Institute (ANSI) |
| ISO 11119-3 | ISO 11119-3 (2002) | English | Gas cylinders of composite construction--Specification and test methods--Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners | American National Standards Institute (ANSI) |
| ISO 11120 | ISO 11120 (1999) | English | Gas cylinders--Refillable seamless steel tubes of water capacity between 150 L and 3000 L--Design, construction and testing | American National Standards Institute (ANSI) |
| ISO 11121 | UNI ISO 11121 (2010) | English | Recreational diving services - Requirements for introductory training programmes to scuba diving | Ente Nazionale Italiano di Unificazione (UNI) |
| ISO 11135-1 (2007) | I.S. EN ISO 11135-1 (2007) | English | Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices | National Standards Authority of Ireland (NSAI) |
| ISO 11137-1 (2006) | I.S. EN ISO 11137-1 (2006) | English | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices | National Standards Authority of Ireland (NSAI) |
| ISO 11137-2 (2012) | I.S. EN ISO 11137-2 (2012) | English | Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose | National Standards Authority of Ireland (NSAI) |
| ISO 11138-2 (2006) | I.S. EN ISO 11138-2 (2009) | English | Sterilization of health care products - Biological indicators - Part 2: Biological indicators for ethylene oxide sterilization processes | National Standards Authority of Ireland (NSAI) |
| ISO 11138-3 (2006) | I.S. EN ISO 11138-3 (2009) | English | Sterilization of health care products - Biological indicators - Part 3: Biological indicators for moist heat sterilization processes | National Standards Authority of Ireland (NSAI) |
| ISO 11140-1 (2005) | I.S. EN ISO 11140-1 (2009) | English | Sterilization of health care products - Chemical indicators - Part 1: General requirements | National Standards Authority of Ireland (NSAI) |
| ISO 11178 (1995) | GSO 2130 (2010) | Arabic | Spices and condiments – Star anise (lllicium verum Hook. f.) – Specification (Draft Standard) | GCC Standardization Organization (GSO) |
| ISO 11178 (1995) | GSO 2130 (2010) | English | Spices and condiments – Star anise (lllicium verum Hook. f.) – Specification (Draft Standard) | GCC Standardization Organization (GSO) |
| ISO 11243 (1994) | JIS D 9453 (2010) | English | Bicycles -- Luggage carriers and stands | Japan Standards Association (JSA) |
| ISO 11243 (1994) | JIS D 9453 (2010) | Japanese | Bicycles -- Luggage carriers and stands | Japan Standards Association (JSA) |
| ISO 11287 (2011) | ET ISO 11287 (2011) | English | Green tea -- Definition and basic requirements | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 11565 (2006) | EAS 565 (2008) | English | Road vehicles — Spark-plugs — Test methods and requirements | East African Community |
| ISO 11607-1 (2006) | I.S. EN ISO 11607-1 (2009) | English | Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems | National Standards Authority of Ireland (NSAI) |
| ISO 11621 | ISO 11621 (1997) | English | Gas cylinders--Procedures for change of gas service | American National Standards Institute (ANSI) |
| ISO 11623 (pdf) ISO 11623 (html) | ISO 11623 (2002) | English | Periodic Inspection and Testing of Composite Gas Cylinders | American National Standards Institute (ANSI) |
| ISO 11660-1 (pdf) ISO 11660-1 (html) | ISO 11660-1 (2008) | English | Cranes: Access, Guards and Restraints: General | American National Standards Institute (ANSI) |
| ISO 11660-2 (pdf) ISO 11660-2 (html) | ISO 11660-2 (1994) | English | Cranes: Access, Guards and Restraints: Mobile Cranes | American National Standards Institute (ANSI) |
| ISO 11660-3 (pdf) ISO 11660-3 (html) | ISO 11660-3 (2008) | English | Cranes: Access, Guards and Restraints: Tower Cranes | American National Standards Institute (ANSI) |
| ISO 11680-1 (2011) (pdf) ISO 11680-1 (2011) (html) | LVS EN ISO 11680-1 (2012) | English | Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine | Latvijas Standarts (LVS) |
| ISO 11680-2 (2011) (pdf) ISO 11680-2 (2011) (html) | LVS EN ISO 11680-2 (2012) | English | Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with back-pack power source | Latvijas Standarts (LVS) |
| ISO 11681-1 (2011) (pdf) ISO 11681-1 (2011) (html) | LVS EN ISO 11681-1 (2012) | English | Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service | Latvijas Standarts (LVS) |
| ISO 11681-2 (2011) (pdf) ISO 11681-2 (2011) (html) | LVS EN ISO 11681-2 (2012) | English | Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service | Latvijas Standarts (LVS) |
| ISO 11683 (1997) | JIS S 0025 (2011) | English | Guidelines for older persons and persons with disabilities -- Packaging and receptacles -- Tactile warnings of danger -- Requirements | Japan Standards Association (JSA) |
| ISO 11683 (1997) | JIS S 0025 (2011) | Japanese | Guidelines for older persons and persons with disabilities -- Packaging and receptacles -- Tactile warnings of danger -- Requirements | Japan Standards Association (JSA) |
| ISO 11697 (1995) | ET ISO 11697 (1995) | English | Bases for design of structures -- Loads due to bulk materials | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 11701 (2009) | ET ISO 11701 (2012) | English | Vegetable fats and oils - Determination of phospholipids content in lecithins by HPLC using a light-scattering detector | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 11702 (2009) | ET ISO 11702 (2012) | English | Animal and vegetables fats and oils- Enzymatic determination of total sterols content | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 11737-1 (2006) | I.S. EN ISO 11737-1 (2006) | English | Sterilization of medical devices - Microbiological methods - Part 1: Determination of a population of microorganisms on products | National Standards Authority of Ireland (NSAI) |
| ISO 11737-2 (2009) | I.S. EN ISO 11737-2 (2009) | English | Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process | National Standards Authority of Ireland (NSAI) |
| ISO 11749 (1995) | GB 13552 (2008) | Chinese | Automotive V－ribbed belts | Standardization Administration of China (SAC) |
| ISO 11749 (1995) | GB 13552 (2008) | English | Automotive V – ribbed belts | Standardization Administration of China (SAC) |
| ISO 11806-1:2011 (pdf) ISO 11806-1:2011 (html) | BDS EN ISO 11806-1 (2011) | English | Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine | Bulgarian Institute for Standardization (BDS) |
| ISO 11806-2:2011 (pdf) ISO 11806-2:2011 (html) | BDS EN ISO 11806-2 (2011) | English | Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with back-pack power unit | Bulgarian Institute for Standardization (BDS) |
| ISO 11813 (2010) | ET ISO 11813 (2012) | English | Milk and milk products -- Determination of zinc content -- Flame atomic absorption spectrometric method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 11850 (2011) (pdf) ISO 11850 (2011) (html) | LVS EN ISO 11850 (2012) | English | Machinery for forestry - General safety requirements | Latvijas Standarts (LVS) |
| ISO 11866-1 (2005) | ET ISO 11866.1 (2012) | English | Milk and milk products -- Enumeration of presumptive Escherichia coli -- Part 1: Most probable number technique using 4-methylumbelliferyl-beta-D-glucuronide (MUG) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 11866-2 (2005) | ET ISO 11866.2 (2012) | English | Milk and milk products -- Enumeration of presumptive Escherichia coli -- Part 2: Colony-count technique at 44 degrees C using membranes | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 11870 (2009) | ET ISO 11870 (2012) | English | Milk and milk products -- Determination of fat content -- General guidance on the use of butyrometric methods | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 12078 (2006) | ET ISO 12078 (2012) | English | Anhydrous milk fat -- Determination of sterol composition by gas liquid chromatography (Reference method) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 12082 (2006) | ET ISO 12082 (2012) | English | Processed cheese and processed cheese products -- Calculation of the content of added citrate emulsifying agents and acidifiers/pH-controlling agents, expressed as citric acid | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 12100-1 (2003) | JIS B 9700-1 (2004) | English | Safety of machinery -- Basic concepts, general principles for design -- Part 1: Basic terminology, methodology | Japan Standards Association (JSA) |
| ISO 12100-1 (2003) | JIS B 9700-1 (2004) | Japanese | Safety of machinery -- Basic concepts, general principles for design -- Part 1: Basic terminology, methodology | Japan Standards Association (JSA) |
| ISO 12193 (2004) | ET ISO 12193 (2012) | English | Animal and vegetable fats and oils -- Determination of lead by direct graphite furnace atomic absorption spectroscopy | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 12228 (1999) | ET ISO 12228 (2012) | English | Animal and vegetable fats and oils -- Determination of individual and total sterols contents -- Gas chromatographic method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 12468-1 (2003) | ET ISO 12468.1 (2003) | English | External exposure of roofs to fire -- Part 1: Test method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 12468-2 (2005) | ET ISO 12468.2 (2005) | English | External fire exposure to roofs -- Part 2: Classification of roofs | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 12494 (2001) | ET ISO 12494 (2001) | English | Atmospheric icing of structures | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 12543-1 (2011) | ET ISO 12543.1 (2011) | English | Glass in building -- Laminated glass and laminated safety glass -- Part 1: Definitions and description of component parts | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 12543-2 (2011) | ET ISO 12543.2 (2011) | English | Glass in building -- Laminated glass and laminated safety glass -- Part 2: Laminated safety glass | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 12543-3 (2011) | ET ISO 12543.3 (2011) | English | Glass in building -- Laminated glass and laminated safety glass -- Part 3: Laminated glass | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 12543-4 (2011) | ET ISO 12543.4 (2011) | English | Glass in building -- Laminated glass and laminated safety glass -- Part 4: Test methods for durability | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 12543-5 (2011) | ET ISO 12543.5 (2011) | English | Glass in building -- Laminated glass and laminated safety glass -- Part 5: Dimensions and edge finishing | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 12543-6 (2011) | ET ISO 12543.6 (2011) | English | Glass in building -- Laminated glass and laminated safety glass -- Part 6: Appearance | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 12567-1 (2010) | ET ISO 12567.1 (2010) | English | Thermal performance of windows and doors -- Determination of thermal transmittance by the hot-box method -- Part 1: Complete windows and doors | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 12567-2 (2005) | ET ISO 12567.2 (2005) | English | Thermal performance of windows and doors -- Determination of thermal transmittance by hot box method -- Part 2: Roof windows and other projecting windows | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 12863 (2011) | DIN EN ISO 12863 (2011) | English | Standard test method for assessing the ignition propensity of cigarettes | Deutsches Institut für Normung (DIN) |
| ISO 12867 (1998) | GB 18143 (2011) | Chinese | Ophthalmic instruments－Trial frames | Standardization Administration of China (SAC) |
| ISO 12871 (2010) | ET ISO 12871 (2012) | English | Olive oils and olive-pomace oils -- Determination of aliphatic alcohols content by capillary gas chromatography | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 12872 (2010) | ET ISO 12872 (2012) | English | Olive oils and olive-pomace oils -- Determination of the 2-glyceryl monopalmitate content | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 12873 (2010) | ET ISO 12873 (2012) | English | Olive oils and olive-pomace oils -- Determination of wax content by capillary gas chromatography | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 12952-1 (1998) | COMESA 265-1 (2006) | English | Textiles — Burning behaviour of bedding items —Part 1:General test methods for the ignitability by a smouldering cigarette | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 12952-2 (1998) | COMESA 265-2 (2006) | English | Textiles — Burning behaviour of bedding items —Part 2:Specific test methods for the ignitability by a smouldering cigarette | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 12952-3 (1998) | COMESA 265-3 (2006) | English | Textiles — Burning behaviour of bedding items —Part 3:General test methods for the ignitability by a small open flame | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 12952-4 (1998) | COMESA 265-4 (2006) | English | Textiles — Burning behaviour of bedding items —Part 4:Specific test methods for the ignitability by a small open flame | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 12966-2 (2011) | ET ISO 12966.2 (2012) | English | Animal vegetables fats and oils -- Gas chromatography of fatty acid methyl esters -- Part 2: Preparation of methyl esters of fatty acids | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 12966-3 (2009) | ET ISO 12966.3 (2012) | English | Animal vegetables fats and oils -- Gas chromatography of fatty acid methyl esters -- Part 3: Preparation of methyl esters using trimethylsulfonium hydroxide (TMSH) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 13082 (2011) | ET ISO 13082 (2012) | English | Milk and milk products -- Determination of the lipase activity of | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 13408-1 (2008) | I.S. EN ISO 13408-1 (2011) | English | Aseptic processing of health care products - Part 1: General requirements | National Standards Authority of Ireland (NSAI) |
| ISO 13408-2 (2003) | I.S. EN ISO 13408-2 (2011) | English | Aseptic processing of health care products - Part 2: Filtration | National Standards Authority of Ireland (NSAI) |
| ISO 13408-3 (2006) | I.S. EN ISO 13408-3 (2011) | English | Aseptic processing of health care products - Part 3: Lyophilization | National Standards Authority of Ireland (NSAI) |
| ISO 13408-4 (2005) | I.S. EN ISO 13408-4 (2011) | English | Aseptic processing of health care products - Part 4: Clean-in-place technologies | National Standards Authority of Ireland (NSAI) |
| ISO 13408-5 (2006) | I.S. EN ISO 13408-5 (2011) | English | Aseptic processing of health care products - Part 5: Sterilization in place | National Standards Authority of Ireland (NSAI) |
| ISO 13408-6 (2005) | I.S. EN ISO 13408-6 (2011) | English | Aseptic processing of health care products - Part 6: Isolator systems | National Standards Authority of Ireland (NSAI) |
| ISO 13485 (2003) | I.S. EN ISO 13485 (2012) | English | Medical devices - Quality management systems - Requirements for regulatory purposes | National Standards Authority of Ireland (NSAI) |
| ISO 13690 (1999) | ET ISO 13690 (2001) | English | CEREALS, PULSES AND MILLED PRODUCTS-SAMPLING OF STATIC BATCHES | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 13785-1 (2002) | ET ISO 13785.1 (2002) | English | Reaction-to-fire tests for façades -- Part 1: Intermediate-scale test | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 13785-2 (2002) | ET ISO 13785.2 (2002) | English | Reaction-to-fire tests for façades -- Part 2: Large-scale test | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 13822 (2010) | ET ISO 13822 (2010) | English | Bases for design of structures -- Assessment of existing structures | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 13823 (2008) | ET ISO 13823 (2008) | English | General principles on the design of structures for durability | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 13824 (2009) | ET ISO 13824 (2009) | English | Bases for design of structures -- General principles on risk assessment of systems involving structures | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 13849-1 (2006) | JIS B 9705-1 (2011) | English | Safety of machinery -- Safety-related parts of control systems -- Part 1: General principles for design | Japan Standards Association (JSA) |
| ISO 13849-1 (2006) | JIS B 9705-1 (2011) | Japanese | Safety of machinery -- Safety-related parts of control systems -- Part 1: General principles for design | Japan Standards Association (JSA) |
| ISO 13850 (2006) | JIS B 9703 (2011) | English | Safety of machinery -- Emergency stop -- Principles for design | Japan Standards Association (JSA) |
| ISO 13850 (2006) | JIS B 9703 (2011) | Japanese | Safety of machinery -- Emergency stop -- Principles for design | Japan Standards Association (JSA) |
| ISO 13851 (2002) | JIS B 9712 (2006) | English | Safety of machinery -- Two-hand control devices -- Functional aspects and design principles | Japan Standards Association (JSA) |
| ISO 13851 (2002) | JIS B 9712 (2006) | Japanese | Safety of machinery -- Two-hand control devices -- Functional aspects and design principles | Japan Standards Association (JSA) |
| ISO 13852 (1996) | JIS B 9707 (2002) | English | Safety of machinery -- Safety distances to prevent danger zones being reached by the upper limbs | Japan Standards Association (JSA) |
| ISO 13852 (1996) | JIS B 9707 (2002) | Japanese | Safety of machinery -- Safety distances to prevent danger zones being reached by the upper limbs | Japan Standards Association (JSA) |
| ISO 13853 (1998) | JIS B 9708 (2002) | English | Safety of machinery -- Safety distances to prevent danger zones being reached by the lower limbs | Japan Standards Association (JSA) |
| ISO 13853 (1998) | JIS B 9708 (2002) | Japanese | Safety of machinery -- Safety distances to prevent danger zones being reached by the lower limbs | Japan Standards Association (JSA) |
| ISO 13854 (1996) | JIS B 9711 (2002) | English | Safety of machinery -- Minimum gaps to avoid crushing of parts of the human body | Japan Standards Association (JSA) |
| ISO 13854 (1996) | JIS B 9711 (2002) | Japanese | Safety of machinery -- Minimum gaps to avoid crushing of parts of the human body | Japan Standards Association (JSA) |
| ISO 13855 (2002) | JIS B 9715 (2006) | English | Safety of machinery -- Positioning of protective equipment with respect to the approach speeds of parts of the human body | Japan Standards Association (JSA) |
| ISO 13855 (2002) | JIS B 9715 (2006) | Japanese | Safety of machinery -- Positioning of protective equipment with respect to the approach speeds of parts of the human body | Japan Standards Association (JSA) |
| ISO 13856-1 (2001) | JIS B 9717-1 (2011) | English | Safety of machinery -- Pressure-sensitive protective devices -- Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors | Japan Standards Association (JSA) |
| ISO 13856-1 (2001) | JIS B 9717-1 (2011) | Japanese | Safety of machinery -- Pressure-sensitive protective devices -- Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors | Japan Standards Association (JSA) |
| ISO 13875 (2005) | ET ISO 13875 (2012) | English | -- Determination of isolated trans isomers by infrared spectrometry | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 13884 (2003) | ET ISO 13884 (2012) | English | Animal vegetables fats and oils-- Determination of isolated trans isomers by infrared spectrometry | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 13894-1 (2000) | ET ISO 13894.1 (2000) | English | High-pressure decorative laminates -- Composite elements -- Part 1: Test methods | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 13912 (2005) | COMESA 214 (2006) | English | Structural timber — Machine strength grading — Basic principles | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 13937-1 (2000) | EAS 254 (2001) | English | Textiles — Tear properties of fabrics — Determination of tear resistance by falling pendulum (Elmendorf) apparatus | East African Community |
| ISO 14118 (2000) | JIS B 9714 (2006) | English | Safety of machinery -- Prevention of unexpected start-up | Japan Standards Association (JSA) |
| ISO 14118 (2000) | JIS B 9714 (2006) | Japanese | Safety of machinery -- Prevention of unexpected start-up | Japan Standards Association (JSA) |
| ISO 14119 (1998) | JIS B 9710 (2006) | English | Safety of machinery -- Interlocking devices associated with guards -- Principles for design and selection | Japan Standards Association (JSA) |
| ISO 14119 (1998) | JIS B 9710 (2006) | Japanese | Safety of machinery -- Interlocking devices associated with guards -- Principles for design and selection | Japan Standards Association (JSA) |
| ISO 14120 (2002) | JIS B 9716 (2006) | English | Safety of machinery -- Guards -- General requirements for the design and construction of fixed and movable guards | Japan Standards Association (JSA) |
| ISO 14120 (2002) | JIS B 9716 (2006) | Japanese | Safety of machinery -- Guards -- General requirements for the design and construction of fixed and movable guards | Japan Standards Association (JSA) |
| ISO 14121 (1999) | JIS B 9702 (2000) | English | Safety of machinery -- Principles of risk assessment | Japan Standards Association (JSA) |
| ISO 14121 (1999) | JIS B 9702 (2000) | Japanese | Safety of machinery -- Principles of risk assessment | Japan Standards Association (JSA) |
| ISO 14122-1 (2001) | JIS B 9713-1 (2004) | English | Safety of machinery -- Permanent means of access to machinery -- Part 1: Choice of a fixed means of access between two levels | Japan Standards Association (JSA) |
| ISO 14122-1 (2001) | JIS B 9713-1 (2004) | Japanese | Safety of machinery -- Permanent means of access to machinery -- Part 1: Choice of a fixed means of access between two levels | Japan Standards Association (JSA) |
| ISO 14122-2 (2001) | JIS B 9713-2 (2004) | English | Safety of machinery -- Permanent means of access to machinery -- Part 2: Working platforms and walkways | Japan Standards Association (JSA) |
| ISO 14122-2 (2001) | JIS B 9713-2 (2004) | Japanese | Safety of machinery -- Permanent means of access to machinery -- Part 2: Working platforms and walkways | Japan Standards Association (JSA) |
| ISO 14122-3 (2001) | JIS B 9713-3 (2004) | English | Safety of machinery -- Permanent means of access to machinery -- Part 3: Stairs, stepladders and guard-rails | Japan Standards Association (JSA) |
| ISO 14122-3 (2001) | JIS B 9713-3 (2004) | Japanese | Safety of machinery -- Permanent means of access to machinery -- Part 3: Stairs, stepladders and guard-rails | Japan Standards Association (JSA) |
| ISO 14122-4 (2002) | JIS B 9713-4 (2004) | English | Safety of machinery -- Permanent means of access to machinery -- Part 4: Fixed ladders | Japan Standards Association (JSA) |
| ISO 14122-4 (2002) | JIS B 9713-4 (2004) | Japanese | Safety of machinery -- Permanent means of access to machinery -- Part 4: Fixed ladders | Japan Standards Association (JSA) |
| ISO 14123-1 (1998) | JIS B 9709-1 (2001) | English | Safety of machinery -- Reduction of risks to health from hazardous substances emitted by machinery -- Part 1: Principles and specifications for machinery manufacturers | Japan Standards Association (JSA) |
| ISO 14123-1 (1998) | JIS B 9709-1 (2001) | Japanese | Safety of machinery -- Reduction of risks to health from hazardous substances emitted by machinery -- Part 1: Principles and specifications for machinery manufacturers | Japan Standards Association (JSA) |
| ISO 14123-2 (1998) | JIS B 9709-2 (2001) | English | Safety of machinery -- Reduction of risks to health from hazardous substances emitted by machinery -- Part 2: Methodology leading to verification procedures | Japan Standards Association (JSA) |
| ISO 14123-2 (1998) | JIS B 9709-2 (2001) | Japanese | Safety of machinery -- Reduction of risks to health from hazardous substances emitted by machinery -- Part 2: Methodology leading to verification procedures | Japan Standards Association (JSA) |
| ISO 14155 (2011) | I.S. EN ISO 14155 (2011) | English | Clinical investigation of medical devices for human subjects - Good clinical practice | National Standards Authority of Ireland (NSAI) |
| ISO 14156 (2001) | ET ISO 14156 (2012) | English | Milk and milk products -- Extraction methods for lipids and liposoluble compounds | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 14230-4 | ISO 14230-4 (2000) | English | Road Vehicles--Diagnostic Systems | American National Standards Institute (ANSI) |
| ISO 14438 (2002) | ET ISO 14438 (2002) | English | Glass in building -- Determination of energy balance value -- Calculation method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 14508 (2006) | EAS 566 (2008) | English | Road vehicles — Spark-plugs — Terminals | East African Community |
| ISO 14644-1 (1999) | JIS B 9920 (2002) | English | Classification of air cleanliness for cleanrooms | Japan Standards Association (JSA) |
| ISO 14644-1 (1999) | JIS B 9920 (2002) | Japanese | Classification of air cleanliness for cleanrooms | Japan Standards Association (JSA) |
| ISO 14673-1 (2004) | ET ISO 14673.1 (2012) | English | Milk and milk products -- Determination of nitrate and nitrite contents -- Part 1: Method using cadmium reduction and spectrometry | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 14673-2 (2004) | ET ISO 14673.2 (2012) | English | Milk and milk products -- Determination of nitrate and nitrite contents -- Part 2: Method using segmented flow analysis (Routine method) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 14673-3 (2004) | ET ISO 14673.3 (2012) | English | Milk and milk products -- Determination of nitrate and nitrite contents -- Part 3: Method using cadmium reduction and flow injection analysis with in-line dialysis (Routine method) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 14891 (2002) | ET ISO 14891 (2012) | English | Milk and milk products -- Determination of nitrogen content -- Routine method using combustion according to the Dumas principle | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 14931 (2004) | COMESA 237 (2006) | English | Leather -- Guide to the selection of leather for apparel (excluding furs) | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 14937 (2009) | I.S. EN ISO 14937 (2009) | English | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices | National Standards Authority of Ireland (NSAI) |
| ISO 14971 (2007) | I.S. EN ISO 14971 (2012) | English | Medical devices - Application of risk management to medical devices | National Standards Authority of Ireland (NSAI) |
| ISO 14982:1998 (pdf) ISO 14982:1998 (html) | BDS EN ISO 14982 (2009) | English | Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria | Bulgarian Institute for Standardization (BDS) |
| ISO 15099 (2003) | ET ISO 15099 (2003) | English | Thermal performance of windows, doors and shading devices -- Detailed calculations | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 15163 (2012) | ET ISO 15163 (2012) | English | Milk and milk products - Calf rennet and adult bovine rennet-- Determination by chromatography of chymosin and bovine pepsin contents | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 15267 (1998) | ET ISO 15267 (2012) | English | Animal vegetables fats and oils -- Flashpoint limit test using Pensky-Martens closed cup flash tester | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 15301 (2001) | ET ISO 15301 (2012) | English | Animal vegetables fats and oils -- Determination of sediment in crude fats and oils -- Centrifuge method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 15302 (2007) | ET ISO 15302 (2012) | English | Animal vegetables fats and oils -- Determination of benzo[a]pyrene -- Reverse-phase high performance liquid chromatography method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 15303 (2001) | ET ISO 15303 (2012) | English | Animal vegetables fats and oils -- Detection and identification of a volatile organic contaminant by GC/MS | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 15304 (2002) | ET ISO 15304 (2012) | English | Animal vegetables fats and oils -- Determination of the content of trans fatty acid isomers of vegetable fats and oils -- Gas chromatographic method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 15305 (1998) | EAS 317 (2002) | English | Animal and vegetable fats and oils — Determination of Lovibond colour | East African Community |
| ISO 15753 (2006) | ET ISO 15753 (2012) | English | Animal vegetables fats and oils -- Determination of polycyclic aromatic hydrocarbons | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 15774 (2000) | ET ISO 15774 (2012) | English | Animal vegetables fats and oils -- Determination of cadmium content by direct graphite furnace atomic absorption spectrometry | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 15788-1 (1999) | ET ISO 15788.1 (2012) | English | Animal vegetables fats and oils-- Determination of stigmastadienes in vegetable oils -- Part 1: Method using capillary-column gas chromatography (Reference method) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 15821 (2007) | ET ISO 15821 (2007) | English | Doorsets and windows -- Water-tightness test under dynamic pressure -- Cyclonic aspects | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 15822 (2007) | ET ISO 15822 (2007) | English | Test method of doorset opening performance in diagonal deformation -- Seismic aspects | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 15928-1 (2003) | ET ISO 15928.1 (2003) | English | Houses -- Description of performance -- Part 1: Structural safety | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 16035 (2003) | ET ISO 16035 (2012) | English | Animal vegetables fats and oils -- Determination of low-boiling halogenated hydrocarbons in edible oils | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 16293-1 (2008) | ET ISO 16293.1 (2008) | English | Glass in building -- Basic soda lime silicate glass products -- Part 1: Definitions and general physical and mechanical properties | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 16332 (2006) | GSO ISO 16332 (2011) | Arabic | Diesel engines – Fuel filter – Method for evaluating fuel/water separation efficiency (Draft Standard) | GCC Standardization Organization (GSO) |
| ISO 16332 (2006) | GSO ISO 16332 (2011) | English | Diesel engines – Fuel filter – Method for evaluating fuel/water separation efficiency | GCC Standardization Organization (GSO) |
| ISO 16602 (2002) | GB 24539 (2009) | Chinese | Protective clothing - Performance requirements of chemical protective clothing | Standardization Administration of China (SAC) |
| ISO 16931 (2009) | ET ISO 16931 (2012) | English | Animal vegetables fats and oils - Determination of polymerized triacylglycerols by high-performance size-exclusion chromatography (HPSEC) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 16932 (2007) | ET ISO 16932 (2007) | English | Glass in building -- Destructive-windstorm-resistant security glazing -- Test and classification | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 16933 (2007) | ET ISO 16933 (2007) | English | Glass in building -- Explosion-resistant security glazing -- Test and classification for arena air-blast loading | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 16934 (2007) | ET ISO 16934 (2007) | English | Glass in building -- Explosion-resistant security glazing -- Test and classification by shock-tube loading | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 16935 (2007) | ET ISO 16935 (2007) | English | Glass in building -- Bullet-resistant security glazing -- Test and classification | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 16936-1 (2005) | ET ISO 16936.1 (2005) | English | Glass in building -- Forced-entry security glazing -- Part 1: Test and classification by repetitive ball drop | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 16936-2 (2005) | ET ISO 16936.2 (2005) | English | Glass in building -- Forced-entry security glazing -- Part 2: Test and classification by repetitive impact of a hammer and axe at room temperature | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 16936-3 (2005) | ET ISO 16936.3 (2005) | English | Glass in building -- Forced-entry security glazing -- Part 3: Test and classification by manual attack | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 16936-4 (2005) | ET ISO 16936.4 (2005) | English | Glass in building -- Forced-entry security glazing -- Part 4: Test and classification by pendulum impact under thermally and fire stressed conditions | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 16940 (2008) | ET ISO 16940 (2008) | English | Glass in building -- Glazing and airborne sound insulation -- Measurement of the mechanical impedance of laminated glass | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 17129 (2006) | ET ISO 17129 (2012) | English | Milk powder -- Determination of soy and pea proteins using capillary electrophoresis in the presence of sodium dodecyl sulfate (SDS-CE) -- Screening method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 17186 (2002) | COMESA 244 (2006) | English | Leather - Physical and mechanical tests - Determination of surface coating thickness | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 17227 (2002) | COMESA 248 (2006) | English | Leather - Physical and mechanical tests - Determination of dry heat resistance of leather | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 17665-1 (2006) | I.S. EN ISO 17665-1 (2006) | English | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices | National Standards Authority of Ireland (NSAI) |
| ISO 17792 (2006) | ET ISO 17792 (2012) | English | Milk, milk products and mesophilic starter cultures -- Enumeration of citrate-fermenting lactic acid bacteria -- Colony-count technique at 25 degrees C | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 17932 (2011) | ET ISO 17932 (2011) | English | Glass in buildings - Insulating glass -- Part 1: Durability of edge seals by climate tests | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 18252 (2006) | ET ISO 18252 (2012) | English | Anhydrous milk fat -- Determination of sterol composition by gas liquid chromatography (Routine method) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 18329 (2004) | ET ISO 18329 (2012) | English | Milk and milk products -- Determination of furosine content -- Ion-pair reverse-phase high-performance liquid chromatography method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 18330 (2003) | ET ISO 18330 (2012) | English | Milk and milk products -- Guidelines for the standardized description of immunoassays or receptor assays for the detection of antimicrobial residues | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 18395 (2005) | ET ISO 18395 (2012) | English | Animal and vegetable fats and oils -- Determination of monoacylglycerols, diacylglycerols, triacylglycerols and glycerol by high-performance size-exclusion chromatography (HPSEC) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 18609 (2000) | ET ISO 18609 (2012) | English | Animal and vegetable fats and oils -- Determination of unsaponifiable matter -- Method using hexane extraction | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 18613 (2005) | COMESA 219 (2006) | English | Repair of flat wooden pallets | Common Market for Eastern and Southern Africa (COMESA) |
| ISO 18902 (pdf) ISO 18902 (html) | ISO 18902 (2001) | English | Photographic Processed Films, Plates, and Papers | American National Standards Institute (ANSI) |
| ISO 18906 (pdf) ISO 18906 (html) | ISO 18906 (2000) | English | Photographic Films--Specifications for Safety Film | American National Standards Institute (ANSI) |
| ISO 19219 (2002) | ET ISO 19219 (2012) | English | Animal and vegetable fats and oils -- Determination of visible foots in crude fats and oils | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 19438 (2004) | GSO ISO 19438 (2011) | Arabic | Diesel fuel and petrol filters for internal combustion engines – Filtration efficiency using particle counting and contaminant retention capacity | GCC Standardization Organization (GSO) |
| ISO 19438 (2004) | GSO ISO 19438 (2011) | English | Diesel fuel and petrol filters for internal combustion engines – Filtration efficiency using particle counting and contaminant retention capacity | GCC Standardization Organization (GSO) |
| ISO 20128 (2006) | ET ISO 20128 (2012) | English | Milk products -- Enumeration of presumptive Lactobacillus acidophilus on a selective medium -- Colony-count technique at 37 degrees C | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 20492-2 (2008) | ET ISO 20492.2 (2008) | English | Glass in buildings - Insulating glass -- Part 2: Chemical fogging tests | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 20492-3 (2010) | ET ISO 20492.3 (2010) | English | Glass in buildings -- Insulating glass -- Part 3: Gas concentration and gas leakage | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 20492-4 (2010) | ET ISO 20492.4 (2010) | English | Glass in buildings -- Insulating glass -- Part 4: Methods of test for the physical attributes of edge seals | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 20541 (2008) | ET ISO 20541 (2012) | English | Milk and milk products -- Determination of nitrate content -- Method by enzymatic reduction and molecular-absorption spectrometry after Griess reaction | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 21187 (2004) | ET ISO 21187 (2012) | English | Milk -- Quantitative determination of bacteriological quality -- Guidance for establishing and verifying a conversion relationship between routine method results and anchor method results | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 21469 (2006) | ET ISO 21469 (2006) | English | Safety of machinery -- Lubricants with incidental product contact -- Hygiene requirements | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 21543 (2006) | ET ISO 21543 (2012) | English | Milk products -- Guidelines for the application of near infrared spectrometry | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 21690 (2006) | ET ISO 21690 (2006) | English | Glass in building -- Glass blocks -- Specification and test methods | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 21987 (2007) | GB 13511.1 (2011) | Chinese | Assembled spectacles Part 1: Single-vision and multifocal | Standardization Administration of China (SAC) |
| ISO 22000 (2005) | ET ISO 22000 (2005) | English | Food safety management systems -- Requirements for any organization in the food chain | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 22006 (2009) | ET ISO 22006 (2009) | English | Quality management systems -- Guidelines for the application of ISO 9001:2008 to crop production | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 22574 (2007) | GSO ISO 22574 (2011) | Arabic | Road vehicles — Brake linings frictions materials — Visual (Draft Standard) | GCC Standardization Organization (GSO) |
| ISO 22574 (2007) | GSO ISO 22574 (2011) | English | Road vehicles — Brake linings frictions materials — Visual (Draft Standard) | GCC Standardization Organization (GSO) |
| ISO 22662 (2007) | ET ISO 22662 (2012) | English | Milk and milk products -- Determination of lactose content by high-performance liquid chromatography (Reference method) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 22716 | NBN EN ISO 22716 (2008) | English | Cosmetics - Good Manufacturing Practices (GMP) - Guidelines on Good Manufacturing Practices | Association Française de Normalisation (AFNOR) |
| ISO 22716 | NBN EN ISO 22716 (2008) | French | Cosmétiques - Bonnes Pratiques de Fabrication (BPF) - Lignes directrices relatives aux Bonnes Pratiques de Fabrication | Association Française de Normalisation (AFNOR) |
| ISO 22897 (2003) | ET ISO 22897 (2003) | English | Glass in building -- Glazing and airborne sound insulation -- Product descriptions and determination of properties | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 22935-1 (2009) | ET ISO 22935.1 (2012) | English | Milk and milk products -- Sensory analysis -- Part 1: General guidance for the recruitment, selection, training and monitoring of assessors | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 22935-2 (2009) | ET ISO 22935.2 (2012) | English | Milk and milk products -- Sensory analysis -- Part 2: Recommended methods for sensory evaluation | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 22935-3 (2009) | ET ISO 22935.3 (2012) | English | Milk and milk products -- Sensory analysis -- Part 3: Guidance on a method for evaluation of compliance with product specifications for sensory properties by scoring | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 22959 (2009) | ET ISO 22959 (2012) | English | Animal and vegetable fats and oils -- Determination of polycyclic aromatic hydrocarbons by on-line donor-acceptor complex chromatography and HPLC with fluorescence detection | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 23275-1 (2006) | ET ISO 23275.1 (2012) | English | Animal and vegetable fats and oils -- Cocoa butter equivalents in cocoa butter and plain chocolate -- Part 1: Determination of the presence of cocoa butter equivalents | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 23275-2 (2006) | ET ISO 23275.2 (2012) | English | Animal and vegetable fats and oils -- Cocoa butter equivalents in cocoa butter and plain chocolate -- Part 2: Quantification of cocoa butter equivalents | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 23714 (2012) | ET ISO 23714 (2012) | English | Pulps -- Determination of water retention value (WRV) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 24500 (2010) | JIS S 0013 (2011) | English | Guidelines for older persons and persons with disabilities -- Auditory signals for consumer products | Japan Standards Association (JSA) |
| ISO 24500 (2010) | JIS S 0013 (2011) | Japanese | Guidelines for older persons and persons with disabilities -- Auditory signals for consumer products | Japan Standards Association (JSA) |
| ISO 24786 (2009) | JIS X 8341-7 (2011) | English | Guidelines for older persons and persons with disabilities -- Information and communications equipment, software and services -- Part 7: Accessibility settings | Japan Standards Association (JSA) |
| ISO 24786 (2009) | JIS X 8341-7 (2011) | Japanese | Guidelines for older persons and persons with disabilities -- Information and communications equipment, software and services -- Part 7: Accessibility settings | Japan Standards Association (JSA) |
| ISO 25537 (2008) | ET ISO 25537 (2008) | English | Glass in building -- Silvered, flat-glass mirror | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 26323 (2009) | ET ISO 26323 (2012) | English | Milk products -- Determination of the acidification activity of dairy cultures by continuous pH measurement (CpH) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 27608 (2010) | ET ISO 27608 (2012) | English | Animal and vegetable fats and oils -- Determination of Lovibond(r) colour -- Automatic method | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 28139:2009 (pdf) ISO 28139:2009 (html) | BDS EN ISO 28139 (2009) | English | Agricultural and forestry machinery - Knapsack combustion-engine-driven mistblowers - Safety requirements | Bulgarian Institute for Standardization (BDS) |
| ISO 28198 (2009) | ET ISO 28198 (2012) | English | Vegetable fats and oils -- Determination of toluene insoluble matter | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 29822 (2009) | ET ISO 29822 (2012) | English | Vegetable fats and oils -- Isomeric diacylglycerols -- Determination of relative amounts of 1,2- and 1,3-diacylglycerols | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 29841 (2009) | ET ISO 29841 (2009) | English | Vegetable fats and oils -- Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins) | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 29981 (2010) | ET ISO 29981 (2012) | English | Milk products -- Enumeration of presumptive bifidobacteria -- Colony count technique at 37 degrees C | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO 121000-2 (2003) | JIS B 9700-2 (2004) | English | Safety of machinery -- Basic concepts, general principles for design -- Part 2: Technical principles | Japan Standards Association (JSA) |
| ISO Guide 71 (2001) | JIS Z 8071 (2003) | English | Guidelines for standards developers to address the needs of older persons and persons with disabilities | Japan Standards Association (JSA) |
| ISO Guide 71 (2001) | JIS Z 8071 (2003) | Japanese | Guidelines for standards developers to address the needs of older persons and persons with disabilities | Japan Standards Association (JSA) |
| ISO PAS 22539 (2007) | ET ISO PAS.22539 (2007) | English | User guidance to ISO 15928 -- Houses -- Description of performance | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO TR 5090 (1977) | COMESA 267 (2006) | English | Textiles - Methods for the removal of nonfibrous matter prior to quantitative analysis of fibre mixtures (Technical Report) | Common Market for Eastern and Southern Africa (COMESA) |
| ISO TR 5925-2 (2006) | ET ISO TR.5925-2 (2006) | English | Fire tests -- Smoke-control door and shutter assemblies -- Part 2: Commentary on test method and the applicability of test conditions and the use of test data in a smoke containment strategy | Quality and Standards Authority of Ethiopia (QSAE) |
| ISO TR 6741-4 (1987) | COMESA 260-4 (2006) | English | Textiles - Fibres and yarns - Determination of commercial mass of consignments – Part 4: Values used for the commercial allowances and the commercial moisture regains | Common Market for Eastern and Southern Africa (COMESA) |
| ISO TR 10476 (1990) | ET ISO TR (2012) | English | Doorsets -- Assessment of burglar-proofness | Quality and Standards Authority of Ethiopia (QSAE) |
| 605 Standards Listed | ||||