Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.
Division Name: Production and General Engineering
Section Name: Abraisives (PGD 9)
Standard | Year | Title | IBR |
---|---|---|---|
IS 551 (pdf) IS 551 (txt) | 1989 | Bonded abrasive products (other than diamond/cubic boron nitride) - Marking system | |
IS 551 (pdf) IS 551 (txt) | 2013 | Bonded abrasive products (other than diamond/cubic boron nitride) - Marking system | ISO 525-1999 |
IS 715 (pdf) | 2002 | Coated Abrasives | |
IS 1004 (pdf) | 1980 | Valve Grinding Compound | |
IS 1249 (pdf) IS 1249 (txt) | 1997 | Recommendations for selection of grinding wheels | |
IS 1262 (pdf) | 1979 | Abrasive Specialities (Bonded) | ISO 2220 |
IS 1991-1 (pdf) IS 1991-1 (txt) | 1987 | Safety requirements for the use, care and protection of abrasive grinding wheels, Part 1: Definitions | ANSI B.7.1 |
IS 1991-2 (pdf) | 1987 | Safety Requirements for the Use, Care and Protection of Abrasive Grinding Wheels, Part 2: Handling and Storage | ANSI B.7.1 |
IS 1991-3 (pdf) IS 1991-3 (txt) | 1987 | Safety Requirements for the Use, Care and Protection of Abrasive Grinding Wheels, Part 3: General Machine Requirements | ANSI B.7.1 |
IS 1991-4 (pdf) IS 1991-4 (txt) | 1988 | Safety requirements for the use, care and protection of abrasive grinding wheels, Part 4: Safety guards | ANSI B.7.1 |
IS 1991-5 (pdf) IS 1991-5 (txt) | 1987 | Safety requirements for the use, care and protection of abrasive grinding wheels, Part 5: Flanges | ANSI B.7.1 |
IS 1991-6 (pdf) IS 1991-6 (txt) | 1987 | Safety Requirements for the use, care and protection of abrasive grinding wheels, Part 6: Inspection and mounting | ANSI B.7.1 |
IS 1991-7 (pdf) IS 1991-7 (txt) | 1987 | Safety requirements for the use, care and protection of abrasive grinding wheels, Part 7: Standard speeds | ANSI B.7.1 |
IS 1991-8 (pdf) IS 1991-8 (txt) | 1987 | Safety requirements for the use, care and protection of abrasive grinding wheels, Part 8: Special speeds | ANSI B.7.1 |
IS 1991-9 (pdf) IS 1991-9 (txt) | 1987 | Safety requirements for the use, care and protection of abrasive grinding wheels, Part 9: General operating rules | ANSI B.7.1 |
IS 1991-10 (pdf) IS 1991-10 (txt) | 1987 | Safety requirements for the use, care and protection of abrasive grinding wheels, Part 10: Mounted wheels | ANSI B.7.1 |
IS 2324-1 (pdf) | 1985 | Bonded abrasive grinding wheels, Part 1: Profiles and types | ANSI B74:2 |
IS 2324-2 (pdf) | 1985 | Bonded Abrasive Grinding Wheels, Part 2: Dimensions | |
IS 2794 (pdf) IS 2794 (txt) | 1979 | Truing/Dressing Tools, Single Diamond | |
IS 2817 (pdf) IS 2817 (txt) | 1965 | Methods for sampling of coated abrasives | |
IS 3178 (pdf) IS 3178 (txt) | 1996 | Abrasive Emery Grain | |
IS 3264 (pdf) IS 3264 (txt) | 1985 | Diamond or Cubic Boron Nitride Abrasive Grinding Wheels | |
IS 3300 (pdf) | 1980 | Dimensions for Mounted Wheels and Points | |
IS 3755 (pdf) | 1966 | Specification for Emery Fillets | |
IS 5201 (pdf) | 1969 | Methods for sampling of abrasive emery grain | |
IS 5319 (pdf) | 1987 | Commercial Steel Wool | F.F.S. 740(a)-65 |
IS 8915 (pdf) | 1978 | Dimensions for depressed centre wheels Type 27 | 2933 |
IS 9291 (pdf) | 1979 | Dimensions of internal grinding wheels | ISO 1117 |
IS 10489 (pdf) | 1983 | Steel Dresser for Abrasive Wheels | |
IS 10519 (pdf) | 1983 | Diamond Abrasive Circular Segmental Saws | |
IS 10960-1 (pdf) | 1984 | Grain sizes for diamond or cubic boron nitride, Part 1: Designation and grain sizes distribution | |
IS 10960-2 (pdf) IS 10960-2 (txt) | 1984 | Grain sizes for diamond or cubic boron nitride, Part 2: Method of test of macro grits | |
IS 10986 (pdf) IS 10986 (txt) | 1984 | General survey, designation and nomenclature of diamond or cubic boron nitiride grinding wheels and saws | ISO 6104 |
IS 10986 (pdf) IS 10986 (txt) | 1984 | Superabrasive Products - Rotating Grinding Tools with Dimaond or Cubic Boron Nitride - General Survey, Designation and Multilingual Nomenclature | ISO 6104:2005 |
IS 11026 (pdf) | 1984 | Razor Hone | |
IS 12057 (pdf) | 1987 | Dimensions for honing stones | ISO 3920 |
IS 12099 (pdf) | 1987 | Triangular Polishing Blocks for the Use in Floor Polishing Machines | |
IS 12686 (pdf) IS 12686 (txt) | 1989 | Abrasives - Diamond or Cubic Boron Nitride Micron Powder Sizes - Testing | ANSI B 74.20 |
IS 13068 (pdf) IS 13068 (txt) | 1991 | Bonded abrasive products - Static balancing of grinding wheels - Testing | ISO 6103 |
IS 13520 (pdf) | 1992 | Diamond Abrasive Frame Saw Blades | |
IS 13521 (pdf) IS 13521 (txt) | 1992 | Marking systems of diamond/cubic boron nitride abrasive products | |
IS 13564 (pdf) IS 13564 (txt) | 1993 | Recommendations for Selection of Diamond and Cubic Boron Nitride Grinding Wheels | |
IS 13596 (pdf) IS 13596 (txt) | 1993 | Dimensional tolerances on grinding wheels | |
IS 13998 (pdf) IS 13998 (txt) | 1994 | Multi-point Diamond Impregnated Dressing Tools | |
IS 14369 (pdf) | 1996 | Abrasive Belts - Designation, Dimensions and Tolerances and Selection of Width/length Combinations | |
IS 14370 (pdf) | 1996 | Determination of magnetic matter in abrasives - test methods | |
IS 14992 (pdf) | 2012 | Coated Abrasives - Flap Wheels with Shaft | ISO 3919 |
IS 15066 (pdf) | 2001 | Coated Abrasives - Flap Wheel with Incorporated Flanges or Separate Flanges - Designation and Dimensions | |
IS 15287-1 (pdf) IS 15287-1 (txt) | 2003 | Coated Abrasives - Grain Size Analysis, Part 1: Grain Size Distribution Test | ISO 6344-1 |
IS 15287-2 (pdf) IS 15287-2 (txt) | 2003 | Coated Abrasives - Grain Size Analysis, Part 2: Determination of Grain Size Distribution of Macrogrits P12 to P220 | |
IS 15287-3 (pdf) IS 15287-3 (txt) | 2003 | Coated Abrasives - Grain Size Analysis, Part 3: Determination of Grain Size Distribution of Microgrits P240 to P2500 | ISO 6344-3 |
IS 15288-1 (pdf) IS 15288-1 (txt) | 2003 | Bonded Abrasives - Determination and Designation of Grain Size Distribution, Part 1: Macrogrits F 4 to F 220 | |
IS 15288-2 (pdf) IS 15288-2 (txt) | 2003 | Bonded Abrasives - Determination and Designation of Grain Size Distribution, Part 2: Microgrits F230 to F1200 | ISO 8486-2 |
IS 15289-1 (pdf) IS 15289-1 (txt) | 2013 | Abrasive Macrograins - Determination of Bulk Density, Part 1: Macrogrits | ISO 9136-1:2004 |
IS 15289-2 (pdf) IS 15289-2 (txt) | 2013 | Abrasive Macrograins - Determination of Bulk Density, Part 1: Microgrits | ISO 9136-2:1999 |
IS 15289 (pdf) IS 15289 (txt) | 2003 | Abrasive Macrograins - Determination of Bulk Density | |
IS 15290 (pdf) | 2003 | Abrasive Grains - Sampling and Splitting | ISO 9138 |
IS 15297 (pdf) IS 15297 (txt) | 2003 | Bonded Abrasive Products - Permissible Unbalances of Grinding Wheels as Delivered - Testing | |
IS 15297 (pdf) IS 15297 (txt) | 2013 | Bonded Abrasive Products - Permissible Unbalances of Grinding Wheels as Delivered - Static Testing | ISO 6103:2005 |
IS 15299 (pdf) IS 15299 (txt) | 2002 | Machine Tools - Mounting of Plain Grinding Wheels by Means of Hub Flanges | ISO 666 |
IS 15299 (pdf) IS 15299 (txt) | 2013 | Machine Tools - Mounting of Plain Grinding Wheels by Means of Hub Flanges | ISO 666:2006 |
IS 15425 (pdf) IS 15425 (txt) | 2004 | Abrasive Grains - Determination of Capillarity | ISO 9137 |
IS 15538 (pdf) IS 15538 (txt) | 2004 | Abrasive grains - Test sieving machines | ISO 9284 |
IS 15555 (pdf) IS 15555 (txt) | 2004 | Test Sieves - Technical requirements and testing - test sieves of electroformed sheets | ISO 3310-3 |
IS/ISO 603-1 (pdf) IS/ISO 603-1 (txt) | 1999 | Bonded Abraisive Products - Dimensions, Part 1: Grinding Wheels for External Cylindrical Grinding Between Centres | ISO 603-1 |
IS/ISO 603-3 (pdf) IS/ISO 603-3 (txt) | 1999 | Bonded Abraisive Products - Dimensions, Part 3: Grinding Wheels for Internal Cylindrical Grinding | ISO 603-3 |
IS/ISO 603-10 (pdf) | 1999 | Bonded Abraisive Products - Dimensions, Part 10: Stones for Honing and Superfinishings | ISO 603-10 |
IS/ISO 13942 (pdf) IS/ISO 13942 (txt) | 2000 | Bonded Abrasive Products - Limit Deviations and Run-Out Tolerances | ISO 13942 |
IS/ISO 15635 (pdf) | 2001 | Coated Abrasives - Flap Discs | ISO 15635:2001 |
IS/ISO 21948 (pdf) | 2001 | Coated abrasives - Plain sheets | ISO 21948:2001 |
IS/ISO 21950 (pdf) | 2001 | Coated Abrasives - Plain Discs | ISO 21950:2001 |
IS/ISO 21951 (pdf) | 2001 | Coated Abrasives - Plain Discs with Holes for Dust Extraction | ISO 21951:2001 |
Last Updated: October 9, 2013
↑