Divisional Index ↑

Public Safety Standards of the Republic of India

Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.

Division Name: Production and General Engineering
Section Name: Cutting tools (PGD 32)

StandardYearTitleIBR
IS 1715 (pdf)
IS 1715 (txt)
2002Self-Holding Tapers - Dimensions
IS 1830 (pdf)
IS 1830 (txt)
1982Technical supply conditions for milling cuttersISO 3855
IS 1850 (pdf)1961Dimensions for shank diameters and driving squares for rotating tools
IS 1983 (pdf)2004Shank for Turning and Planing Tools - Shapes and Dimensions of the SectionISO 241
IS 2340 (pdf)1972Dimensions for self-release 7/24 tapers for milling arbors and tool shanksISO 297
IS 2428 (pdf)2007Classification and application of hard cutting materials for metal removal with defined cutting edges - Designation of the main groups and groups of applicationISO 514
IS 2594 (pdf)
IS 2594 (txt)
2003Hacksaw Blades
IS 2668 (pdf)2004T-slot Milling CuttersISO 3337
IS 2669 (pdf)1971Woodruff Keyslot Milling Cutters with Parallel Shank
IS 2670 (pdf)1991Thread Milling Cutter Shell Type
IS 2671 (pdf)1964Interlocked Milling Cutters
IS 3019 (pdf)1973High Speed Steel Butt-Welded Single Point Turning Tools
IS 3239 (pdf)1994Die Stock for Circular Screwing Dies
IS 4022 (pdf)
IS 4022 (txt)
1996Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole - DimensionsISO 883
IS 4914 (pdf)1983Tap Wrenches, Adjustable
IS 4921 (pdf)1968Extension Bars
IS 5030-1 (pdf)1982Metal Cutting Bandsaw Blades, Part I: Definitions and TerminologyISO 4875/1
IS 5030-2 (pdf)1982Metal Cutting Bandsaw Blades, Part II: TolerancesISO 4875/2
IS 5030-3 (pdf)
IS 5030-3 (txt)
2005Metal Cutting Bandsaw Blades, Part III: Dimensions and Requirements
IS 5031 (pdf)
IS 5031 (txt)
1992Saws - Metal SlittingISO 2296-1972
IS 5099 (pdf)2003Technical Supply Conditions for Twist Drills
IS 5100 (pdf)1969Twist Drills, Parallel Shanks, Stub Series for Right hand Cutting
IS 5101 (pdf)1991Twist Drills, Parallel Shank, Jobber Series
IS 5102 (pdf)1969Twist Drills, Parallel Shank, Long SeriesISO 494
IS 5103 (pdf)1969Twist Drills, Morse Taper Shanks
IS 5104 (pdf)1969Twist Drills, Oversize Morse Taper Shank
IS 5105 (pdf)1969Twist Drills, Taper Square Shanks for Ratchet Braces
IS 5106 (pdf)1969Twist Drills, Taper Square Shanks for Carpenter's Braces
IS 5360 (pdf)1969Dimensions for driving tenons
IS 5362 (pdf)1969Twist Drills, Parallel Shanks, Stub Series, Left Hand Cutting for Automatics
IS 5363 (pdf)1983Micro-drills
IS 5364 (pdf)1969Twist drills for taper pin holes with taper 1:50
IS 5365 (pdf)
IS 5365 (txt)
1991Core Drills, Parallel ShanksISO 7089
IS 5366 (pdf)1978Core Drills, Morse Taper ShanksISO 7079
IS 5443 (pdf)1994High speed steel reamers - Technical supply conditions
IS 5444 (pdf)1978Parallel Hand Reamers with Parallel ShanksISO 236-1
IS 5445 (pdf)1978Long Fluted Machine Reamers with Morse Taper ShanksISO 236-1
IS 5446 (pdf)1978Machine Chucking Reamers with Parallel ShanksISO 521
IS 5447 (pdf)1978Machine Chucking Reamers with Morse Taper ShanksISO 521
IS 5568 (pdf)1978Dimensions for tenons and cross-slots for tools with taper bore 1:30ISO 2402
IS 5693 (pdf)1988Countersinks 90°, with Parallel Shanks and Solid PilotsISO 4205
IS 5698 (pdf)1970Rotary Form-relieved Gear Cutters for Spur and Helical Gears
IS 5702 (pdf)
IS 5702 (txt)
1970Flat Thread Rolling Dies
IS 5703 (pdf)1988Countersinks 90 with Morse Taper Shanks and Detachable PilotsISO 4204
IS 5704 (pdf)1988Counterbores with Parallel Shanks and Solid PilotsISO 4206
IS 5705 (pdf)1988Detachable Pilots for Use with Counterbores and Countersink 90°ISO 4209
IS 5710 (pdf)1988Counterbores with Morse Taper Shanks and Detachable PilotsISO 4207
IS 5881 (pdf)1984Taper Pin Hand ReamersISO 3465
IS 5882 (pdf)1970Socket Reamers with Parallel Shanks
IS 5907 (pdf)1970Socket Reamers with Morse Taper Shanks
IS 5918 (pdf)1984Taper Pin, Machine Reamers with Morse Taper ShanksISO 3467
IS 5919 (pdf)1978Machine Bridge ReamersISO 2238
IS 5926 (pdf)1970Shell Reamers
IS 5927 (pdf)1981Reduction Sleeves 7/24 Tapers to Morse TapersISO 4202
IS 5936 (pdf)1981Arbors with Morse Taper Shanks for Shell ToolsISO 2402
IS 5989 (pdf)1998Hole mills
IS 6171 (pdf)1992Screwing taps - Technical supply conditions5967-1981
IS 6173-1 (pdf)
IS 6173-1 (txt)
1992Screwing Taps - Dimensions and Tolerances on Threaded Portion, Part 1: For ISO Metric Screw Threads
IS 6173-2 (pdf)1992Screwing Taps - Dimensions and tolerances of threaded portion, Part 2: For pipe threads G, Rp and Rc series
IS 6175-1 (pdf)1992Screwing Taps, Part 1: Hand, and Short Machine Screwing Taps for ISO Metric Screw Threads Sizes M1 to M2.5
IS 6175-2 (pdf)1992Screwing Taps, Part 2: Hand and Short Machine Screwing Taps For ISO Metric Screw Threads Sizes M3 to M10
IS 6175-3 (pdf)
IS 6175-3 (txt)
1992Screwing Taps, Part 3: Hand and Short Machine Screwing Taps for ISO Metric Screw Threads Sizes M3 to M68 with Coarse Pitches and M3 to M100 with Fine Pitches
IS 6175-4 (pdf)
IS 6175-4 (txt)
1991Screwing Taps, Part 4: Long Shank Machine Screwing Taps for ISO Metric Screw Threads Sizes from M3 to M24
IS 6175-5 (pdf)
IS 6175-5 (txt)
1991Screwing taps, Part 5: Nut Screwing Taps for ISO Metric Screw Threads Sizes M3 to M68 with Coarse Pitches
IS 6175-6 (pdf)
IS 6175-6 (txt)
1992Screwing Taps, Part 6: Screwing Taps for Pipe Threads Parallel G Series
IS 6175-7 (pdf)1992Screwing Taps, Part 7: Screwing Taps for Pipe Threads Parallel Rp Series
IS 6175-8 (pdf)1992Screwing Taps, Part 8: Screwing Taps for Pipe Threads Taper Rc Series
IS 6255 (pdf)1995Inverse Dove-Tail and Dove-Tail Milling CuttersISO 3859
IS 6256 (pdf)1995Shell End Single Angle Milling Cutters
IS 6257 (pdf)1982Shell End Mills
IS 6285 (pdf)1971Dimensions for interchangeability of milling cutters and milling arbors with key drive
IS 6308 (pdf)1982Side and Face Milling CuttersISO 2587-1972
IS 6309 (pdf)1982Cylindrical Milling Cutters
IS 6310 (pdf)1971Dimensions for interchangeability of milling cutters and milling arbors with tenon drive
IS 6314 (pdf)1982Single Corner Rounding Milling CuttersISO 3860
IS 6322 (pdf)1982Concave Milling CuttersISO 3860
IS 6323 (pdf)1982Convex Milling Cutters
IS 6324 (pdf)1971Single Angle Milling Cutters
IS 6325 (pdf)1971Double Angle Milling Cutters
IS 6326 (pdf)1996Equal Angle Milling Cutters
IS 6352 (pdf)1991Slot Drills with Parallel Shank
IS 6353 (pdf)1991End Mills with Parallel Shank
IS 6354 (pdf)1991End Mills with Morse Taper Tapped End Shank
IS 6355 (pdf)1982Keyway Milling Cutters
IS 6388 (pdf)1991Slot Drills with Morse Taper Shanks
IS 6550 (pdf)1992Thread Milling Cutter with Parallel Shank
IS 6551 (pdf)1992Thread Milling Cutters with Morse Taper Shanks
IS 6681 (pdf)1972Dimensions for self-release 7/24 tapers for spindle noses for milling machines
IS 6682 (pdf)1991Morse Taper Extension SocketsISO 238
IS 6702 (pdf)1991Morse Taper Reduction SleevesISO 238
IS 6708 (pdf)1977Centre Drills Type AISO 866
IS 6709 (pdf)1977centre drills type B
IS 6710 (pdf)1977Centre Drills Type RISO 2541
IS 6731 (pdf)1977Locknuts, Narrow Series and Lockwashers with Straight Inner Tab for Rolling Bearings
IS 6776 (pdf)1980Knurling Wheels
IS 7766 (pdf)1975Twist Drills for Jig Boring Machines
IS 7772 (pdf)1975Shell Core DrillsISO 3314
IS 7773 (pdf)1975Holding dimensions for broaching tools
IS 7778-1 (pdf)
IS 7778-1 (txt)
2003Small Tools Sampling Inspection Procedures, Part 1: Twist Drills, Countersink and Counterbores
IS 7778-2 (pdf)
IS 7778-2 (txt)
2003Small Tools Sampling Inspection Procedures, Part 2: Reamers
IS 7778-3 (pdf)
IS 7778-3 (txt)
2003Small Tools Sampling Inspection Procedures, Part 3: Sleeves, Sockets and Adaptors
IS 7778-4 (pdf)
IS 7778-4 (txt)
2003Small Tools Sampling Inspection Procedures, Part 4: Screwing Taps, Dies and Knurling Tools
IS 7778-5 (pdf)
IS 7778-5 (txt)
2003Small Tools Sampling Inspection Procedures, Part 5: Milling Cutters
IS 7778-6 (pdf)
IS 7778-6 (txt)
2003Small Tools Sampling Inspection Procedures, Part 6: Milling Arbors and Accessories
IS 7778-7 (pdf)
IS 7778-7 (txt)
2003Small Tools Sampling Inspection Procedures, Part 7: Gear Cutting Tools and Broaches
IS 7778-8 (pdf)
IS 7778-8 (txt)
2003Small Tools Sampling Inspection Procedures, Part 8: Saws
IS 7778-9 (pdf)
IS 7778-9 (txt)
2003Small Tools Sampling Inspection Procedures, Part 9: Single Point (HSS and Carbide Tipped) Tools
IS 7778-10 (pdf)
IS 7778-10 (txt)
2003Small Tools Sampling Inspection Procedures, Part 10: Carbide Tips and Indexable Inserts
IS 7778-11 (pdf)
IS 7778-11 (txt)
2003Small Tools Sampling Inspection Procedures, Part 11: Hard Metal Burrs
IS 7778 (pdf)
IS 7778 (txt)
1975Methods for Sampling Small Tools
IS 7822 (pdf)2005Twist Drills - Extra-long Morse Taper ShanksISO 3291
IS 7823 (pdf)2005Twist Drills - Extra-Long Parallel ShanksISO 3292
IS 8305 (pdf)1976Twist Drills, Morse Taper Shank, Long Series
IS 8306 (pdf)1976Carbide Tipped Twist Drills, Morse Taper Shank
IS 8307 (pdf)1976Carbide Tipped, Twist Drills, Parallel Shank
IS 8405 (pdf)
IS 8405 (txt)
2005Circular Thread Rolling Dies -Specification
IS 8611 (pdf)1988Technical supply conditions for milling arbors and accessories
IS 8614 (pdf)1993Milling Arbors with Self-release 7/24 Taper
IS 8616 (pdf)
IS 8616 (txt)
1993Stub Milling Arbors with Self-Release 7/24 Taper and with Key
IS 8618 (pdf)1977Spacing Collars for Milling ArborsISO 8319-2
IS 8619 (pdf)1977Bearing Collars for Milling ArborsISO 839-2
IS 8620 (pdf)1993Clamping Nuts for Milling Arbors
IS 8621 (pdf)1977Retaining Screw for Milling Arbors
IS 8692-1 (pdf)2004Cylindrical shanks for milling cutters, Part 1: Dimensional characteristics of plain cylindrical shanksISO 3338
IS 8692-2 (pdf)
IS 8692-2 (txt)
2004Cylindrical shanks for milling cutters, Part 2: Dimensional characteristics of flatted cylindrical shanks
IS 8692-2 (pdf)
IS 8692-2 (txt)
2013Cylindrical shanks for milling cutters, Part 2: Dimensional characteristics of flatted cylindrical shanksISO 3338-2:2007
IS 8692-3 (pdf)2007Cylindrical shanks for milling cutters, Part 3: Dimensional characteristics of threaded shanksISO 3338-2
IS 8731 (pdf)
IS 8731 (txt)
1978Technical supply conditions for general purpose gear hobs
IS 8732 (pdf)2003Single Start Solid (Monobloc) Gear Hobs with Tenon Drive or Axial Keyway, 1 to 40 Module - Nominal DimensionsISO 2490
IS 8733 (pdf)1978Tolerances for single start gear hobs
IS 8842 (pdf)1978High Speed Steel Butt-welded Single Point Planing Tools
IS 8918 (pdf)1978Dimensions for spindle noses for adjustable adaptorsISO 2905
IS 8919-1 (pdf)1978Specification for Adjustable Adaptors for Tools with Self-Holding Taper Shanks, Part 1: Short Adaptors
IS 8919-2 (pdf)1978Specification for Adjustable Adaptors for Tools with Self-Holding Taper Shanks, Part 2: Long Adaptors
IS 8919-3 (pdf)1978Specification for Adjustable Adaptors for Tools with Self-Holding Taper Shanks, Part 3: Extra Long Adaptors
IS 8919-4 (pdf)1978Specification for Adjustable Adaptors for Tools with Self-Holding Taper Shanks, Part 4: Clamping Nuts
IS 8919 (pdf)
IS 8919 (txt)
2007Modular units for machine tool construction - Spindle noses and adjustable adaptors for multi spindle heads
IS 9322 (pdf)
IS 9322 (txt)
1980Technical supply conditions for carbide tipped milling cutters
IS 9323 (pdf)1991Carbide Tipped End Mills with Parallel Shanks
IS 9324 (pdf)1991Carbide Tipped End Mills with Morse Taper Shanks
IS 9325 (pdf)1996Carbide tipped slot drills with parallel shanks
IS 9326 (pdf)1996Carbide Tipped Slot Drills with Morse Taper and Tapped End Shanks
IS 9771 (pdf)1981Carbide Tipped Core Drills with Morse Taper Shanks
IS 9775 (pdf)2000Carbide Flats, Squares and Rounds - Dimensions
IS 9897 (pdf)
IS 9897 (txt)
2001Indexable Inserts for Cutting Tools - DesignationISO 1832
IS 10140 (pdf)1982Bandsaw Blades for WoodworkingISO 3295
IS 10255 (pdf)1982Tapered Die-Sinking Cutters with Parallel ShanksISO 3940
IS 10293 (pdf)1982Dimensions for optional recess on morse taper shanks for tools
IS 10412 (pdf)1983System of designation and marking of single point cutting tools with carbide tipsISO 504
IS 10465 (pdf)1983Chain Wheel Rotary Tooth form Milling Cutter
IS 10514 (pdf)1983Split Taper Socket for Tools with Parallel Shank and Driving Tenon
IS 10571 (pdf)1983Split Taper Sockets for Tools with Parallel Shank, Driving Square and Driving Tenon
IS 10591 (pdf)1983Segmental Saws for Cold Sawing
IS 10608 (pdf)
IS 10608 (txt)
1998Spline Hobs - Straight Sided
IS 10851 (pdf)1984Taper Pin Machine Reamers with Parallel ShanksISO 3465
IS 10884 (pdf)1984Carbide Tipped Chucking Reamers With Parallel Shanks
IS 10885 (pdf)1984Carbide Tipped Chucking Reamers with Morse Taper Shanks
IS 10915 (pdf)
IS 10915 (txt)
1984Terms, definitions and types of twist drillsISO 5419
IS 10923 (pdf)
IS 10923 (txt)
1994Carbide Tipped and Solid Carbide Reamers - Technical Supply Conditions
IS 10952 (pdf)
IS 10952 (txt)
1984Recommendations for drills for use prior to tapping screw threadsISO 2306
IS 11002 (pdf)1984Machine Jig Reamers Morse Taper Shank
IS 11127 (pdf)1984Holders for Knurling Wheels
IS 11143 (pdf)1984Ground High Speed Steel Tool Bits
IS 11172-1 (pdf)1985Recommendations for tool shanks for numerically controlled machine tools (tool stationary type): Part 1 Cylindrical shanks
IS 11172-2 (pdf)1985Recommendations for Tool Shanks for Numerically Controlled Machine Tools (tool stationary type), Part 2: Prismatic Shank
IS 11173-1 (pdf)1985Recommendations for Tool Shanks 7/24 Taper for Numerically Controlled Machine Tools with Automatic Tool Changers (tool rotating type), Part 1: Tool ShanksISO 7388-1
IS 11173-2 (pdf)1985Recommendations for tool shanks 7/24 taper for numerically controlled machine tools with automatic tool changers (tool rotating type): Part 2 Retention knobsISO 7388-2
IS 11351 (pdf)
IS 11351 (txt)
2005Stub Self-Holding Tapers - Dimensions
IS 11441 (pdf)1985Dimensions for ground carbide rounds
IS 11522-1 (pdf)
IS 11522-1 (txt)
1986Recommendations for basic quantities in cutting and grinding, Part 1: Geometry of the active part of cutting tools, general terms, reference systems, tools, working angles and chip breakersISO 3002-1
IS 11523 (pdf)
IS 11523 (txt)
1998Indexable Hardmetal (Carbide) Inserts With Wiper Edges, Without Fixing Hole - DimensionsISO 3365
IS 11677 (pdf)
IS 11677 (txt)
2004Indexable Hardmetal (Carbide) Inserts with Rounded Corners, with Cylindrical fixing Hole - DimensionsISO 3364
IS 11741 (pdf)
IS 11741 (html)
1986Circular Saws for Wood Working
IS 11829 (pdf)1986Miniature Hand Hacksaw Blades
IS 11835-1 (pdf)2005Tool Chucks (End Mill Holders) with Clamp Screws for Flatted Cylindrical Shank Tools : Part 1 - Dimensions of the Driving System of Tool Shanks
IS 11835-2 (pdf)
IS 11835-2 (txt)
2004Tool chucks (end mill holders) with clamp screws fr flatted cylindrical shank tool, Part 2: Connecting dimensions of chucks and designationISO 5414-2
IS 11835 (pdf)1986Dimensions of driving system of tool chuck (end mill holders) with clamp screws for flatted parallel shank toolsISO 5414-1
IS 11934 (pdf)1987Carbide Tipped Shell Reamers
IS 11935 (pdf)1987Carbide Tipped Chucking Reamers with Morse Taper Shank with Long Cutting Edge
IS 11936 (pdf)1987Carbide Tipped Long Fluted Machine Reamer with Morse Taper Shank
IS 11937 (pdf)1987Carbide Tipped Machine Jig Reamer With Morse Taper Shank
IS 11938 (pdf)
IS 11938 (txt)
1987Tool Adaptors for Numerically Controlled Machine Tools (Tool Rotating Type)
IS 11943-1 (pdf)1987Hard Metal Burrs, Part 1: Technical Supply Conditions
IS 11943-2 (pdf)1987Hard Metal Burrs, Part 2: Cylindrical Burrs (Type A)7755-2
IS 11943-3 (pdf)1987Hard Metal Burrs, Part 3: Cylindrical Round (ball) Nose Burrs (Type C)7755-2
IS 11943-4 (pdf)1987Hard Metal Burrs, Part 4: Spherical Burrs (Type D)7755-4
IS 11943-5 (pdf)1987Hard Metal Burrs, Part 5: Oval Burrs (Type E)7755-5
IS 11943-6 (pdf)1987Hard Metal Burrs, Part 6: Arch Round - (Ball -) Nose Burrs (Type F)7755-6
IS 11943-7 (pdf)1987Hard Metal Burrs, Part 7: Arch Pointed Nose Burrs (Type G)7755-7
IS 11943-8 (pdf)1987Hard Metal Burrs, Part 8: Flame Burrs (Type H)7755-8
IS 11943-9 (pdf)1987Hard Metal Burrs, Part 9: 60 and 90 Cone Burrs (Type J and K)7755-9
IS 11943-10 (pdf)1987Hard Metal Burrs, Part 10: Conical Round - (Ball -) Nose Burrs (Type L)7755-10
IS 11943-11 (pdf)1987Hard Metal Burrs, Part 11: Conical Pointed - Nose Burrs (Type M)7755-11
IS 11943-12 (pdf)1987Hard Metal Burrs, Part 12: Inverted Cone Burrs (Type N)7755-12
IS 11949 (pdf)1987Turret Sockets
IS 11950 (pdf)
IS 11950 (txt)
1987Tool Adaptors for Numerically Controlled Machine Tools (Tool Stationary Type)
IS 12319 (pdf)1988Circular screwing dies - General table of dimensions
IS 12320 (pdf)1988Technical supply conditions for circular screwing dies
IS 12321 (pdf)
IS 12321 (txt)
1988Circular Screwing Dies for ISO Metric Threads
IS 12322 (pdf)1988Circular Screwing Dies for Taper Pipe Threads, R-series
IS 12323 (pdf)1988Circular Screwing Dies for Parallel Pipe Threads, G Series
IS 12324 (pdf)1988Hexagonal Die Nuts
IS 12325 (pdf)1988Circular Screwing Dies for ISO Metric Conduit Pipe Threads
IS 12354 (pdf)
IS 12354 (txt)
2002Indexable Hard Material Inserts with Rounded Corners, with Partly Cylindrical Fixing Hole - DimensionsISO 6987
IS 12536 (pdf)1989Small Tools - Disc Type Gear Shaper Cutters
IS 12537 (pdf)1989Small Tools - Hub Type Gear Shaper Cutters
IS 12538 (pdf)1989Small Tools - Shank Type Gear Shaper Cutter
IS 12687 (pdf)1989Small Tools - Subland Twist Drills with Morse Taper Shanks for Holes Prior to Tapping Screw Threads
IS 12688 (pdf)1989Small Tools - Subland Twist Drills with Morse Taper Shank for Clearance Holes and Countersinks for Countersunk Head ScrewsISO 3439
IS 12689 (pdf)1989Small Tools - Subland Twist Drills with Parallel Shanks for Clearance Holes and Counterbores for Slotted Cheese Head Screws
IS 12690 (pdf)1989Small Tools - Subland Twist Drills With Morse Taper Shank for Clearance Holes and Counterbores for Slotted Cheese Head Screws
IS 12691 (pdf)1989Small Tools - Subland Twist Drills with Parallel Shank for Holes Prior to Tapping Screw Threads
IS 12691 (pdf)
IS 12691 (txt)
1989Small Tools - Subland Twist Drills with Parallel Shank for Holes Prior to Tapping Screw Threads (Bi-Lingual)
IS 12691 (pdf)
IS 12691 (txt)
2013Subland Twist Drills with Cylindrical Shanks for Holes Prior to Tapping Screw Threads (Bi-Lingual)ISO 3439:2003
IS 12692 (pdf)1989Small Tools - Subland Twist Drills with Parallel Shanks for Clearance Holes and Countersinks for Countersunk Head Screws
IS 12716 (pdf)2002End Mills with Indexable Inserts
IS 12728 (pdf)1989Carbide tips for dead centre
IS 13167 (pdf)1991Side and Face Milling Cutters with Indexable InsertsISO 6986
IS 13244 (pdf)1991Half Side and Face Cutters with Indexable Inserts
IS 13303 (pdf)1992Countersinks 60° ,90° and 120°. with morse taper shanks
IS 13304 (pdf)1992Countersinks 60° ,90° and 120° . with parallel shanks
IS 13740 (pdf)1993Carbide Tipped Single Point Tools - Technical Supply Conditions
IS 13741-1 (pdf)1993Carbide Tips, Part 1: Carbide Tips for Single Point Tools
IS 13741-2 (pdf)1993Carbide Tips, Part 2: Carbide Tips for Single Point Tools for Light Cutting Operations
IS 13741-3 (pdf)
IS 13741-3 (txt)
1993Carbide Tips, Part 3: Carbide Tips for Single Point Tools Blanks for Sliding Head Type Automats
IS 13741-4 (pdf)1993Carbide Tips, Part 4: Carbide Tips for Multi Point Tools
IS 13741-5 (pdf)1993Carbide Tips, Part 5: Carbide Tips for Twist Drills with Point Angle 115
IS 13741-6 (pdf)
IS 13741-6 (txt)
1993Carbide Tips, Part 6: Carbide Tips for Single Point Threading Tools
IS 13741-7 (pdf)1993Carbide Tips, Part 7: Carbide Tips for Single Point Round Nose Turning Tools
IS 13742-1 (pdf)
IS 13742-1 (txt)
1993Carbide Tipped Single Point Tools - ISO Series, Part 1: Straight Turning Tool (ISO 1)
IS 13742-2 (pdf)1993Carbide Tipped Single Point Tools - ISO Series, Part 2: Cranked Turning and Facing Tool (ISO 2)
IS 13742-3 (pdf)
IS 13742-3 (txt)
1993Carbide Tipped Single Point Tools - ISO Series, Part 3: Cranked Finishing Tool (ISO 3)
IS 13742-4 (pdf)
IS 13742-4 (txt)
1993Carbide Tipped Single Point Tools - ISO Series, Part 4: Broad Turning Tool (ISO 4)
IS 13742-5 (pdf)
IS 13742-5 (txt)
1993Carbide Tipped Single Point Tools - ISO Series, Part 5: Cranked Facing Tool (ISO 5)
IS 13742-6 (pdf)
IS 13742-6 (txt)
1993Carbide Tipped Single Point Tools - ISO Series, Part 6: Cranked Turning Tool (ISO 6)
IS 13742-7 (pdf)
IS 13742-7 (txt)
1993Carbide Tipped Single Point Tools - ISO Series, Part 7: Parting off Tool (ISO 7)
IS 13742-8 (pdf)
IS 13742-8 (txt)
1993Carbide Tipped Single Point Tools - ISO series, Part 8: Boring Tool (ISO 8)
IS 13742-9 (pdf)1993Carbide Tipped Single Point Tools - ISO Series, Part 9: Boring and Facing Tool (ISO 9)
IS 13743-1 to 10 (pdf)
IS 13743-1 to 10 (txt)
1997Carbide Tipped Single Point Tools - Ind Series
IS 13744-1 to 8 (pdf)
IS 13744-1 to 8 (txt)
1995Carbide Tipped Single Point Planing Tools
IS 13776 (pdf)1993Machine tools - Morse taper shanks - Cotter slots with taper keysISO 1080
IS 14168 (pdf)1995Slitting Cutter with Indexable Inserts
IS 14532 (pdf)1998Reduction sleeves with tenon drive with external and internal 7/24 taper ISO DimensionsISO 3936
IS 14584 (pdf)
IS 14584 (txt)
1998Splines and Hobs - Technical Supply Conditions for Hobs
IS 14585 (pdf)1998Spline Hobs - Involute Sided
IS 14586 (pdf)1998Serration Hobs - Straight Sided
IS 14617-2 (pdf)
IS 14617-2 (txt)
1998Indexable Inserts for Cutting Tools - Hardmetal (Carbide) Inserts With Rounded Corners, With Partly Cylindrical Fixing Hole, Part 2: Dimensions of Inserts With 11 Degrees Normal ClearanceISO 6987-2
IS 14775 (pdf)2000Spot Drills - DimensionsISO 10898
IS 14863 (pdf)
IS 14863 (txt)
2000Turning and Copying Tool Holders and Cartridges for Indexable Inserts - DesignationISO 5608
IS 14864 (pdf)
IS 14864 (txt)
2000Boring Bars (Tool Holders with Cylindrical Shank) for Indexable Inserts - DesignationISO 6261
IS 14865 (pdf)
IS 14865 (txt)
2001Boring Bars for Indexable Inserts - DimensionsISO 5609
IS 14866 (pdf)
IS 14866 (txt)
2000Single Point Tool Holders for Turning and Copying for Indexable Inserts - DimensionsISO 5610
IS 14867 (pdf)
IS 14867 (txt)
2000Cartridges, Type A, for Indexable Inserts - DimensionsISO 5611
IS 15067 (pdf)2001End Mills with Brazed Helical Hard Metal Tips - Dimensions
IS 15075 (pdf)2001Rotary and Rotary Impact Masonry Drill Bits with Hard Metal Tips - DimensionsISO 5468
IS 15091-1 (pdf)
IS 15091-1 (txt)
2002Indexable Inserts for Cutting Tools - Ceramic Inserts with Rounded Corners, Part 1: Dimensions of Inserts without Fixing HoleISO 9361-1
IS 15091-2 (pdf)
IS 15091-2 (txt)
2004Indexable Inserts for Cutting Tools - Ceramic Inserts with Rounded Corners, Part 2: Dimensions of Inserts without Cylindrical Fixing HoleISO 9361-2
IS 15092 (pdf)2002Single Point Cutting Tools - Corner RadiiISO 3286
IS 15094 (pdf)
IS 15094 (txt)
2002Classification and Designation of Approximate Chip Control Zones for Indexable Inserts with Chip BreakersISO 10910
IS 15144 (pdf)
IS 15144 (txt)
2002Indexable Hardmetal (Carbide) Inserts with Rounded Corners with Partly Cylindrical Fixing Hole - Dimensions of Inserts With 7° Normal Clearance for Light Alloy and Plastic Components Turning
IS 15762 (pdf)2007Machine tools - Positive drive of morse tapersISO 5413
IS 15777 (pdf)2008Selection of hacksaw tooth for metal cutting - Recommendations
IS 15777 (B) (pdf)
IS 15777 (B) (txt)
2008Selection of Hacksaw Tooth for Metal Cutting - Recommendations
IS/ISO 6462 (pdf)
IS/ISO 6462 (txt)
1983Face Milling Cutters with Indexable Inserts - DimensionsISO 6462:1983
IS/ISO 11173-1 (pdf)
IS/ISO 11173-1 (txt)
2007Recommendations for Tool Shanks 7/24 Taper for Automatic Tool Changers, Part 1: Dimensions and Designation of Shanks of Forms A, AD, AF, U, UD, and UFISO 7388-1
IS/ISO 11173-2 (pdf)
IS/ISO 11173-2 (txt)
2007Recommendations for tool shanks 7/24 taper for automatic tool changers: Part 2: Dimensions and Designation of Shanks of Forms J, JD and JFISO 7388-2
IS/ISO 11173-3 (pdf)
IS/ISO 11173-3 (txt)
2007Recommendations for tool shanks 7/24 taper for automatic tool changers: Part 3: Dimensions and Designation of Shanks of Forms AC, AD, UF, UD, UF, JD and JFISO 7388-3

Last Updated: December 28, 2013