Divisional Index ↑

Public Safety Standards of the Republic of India

Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.

Division Name: Production and General Engineering
Section Name: Bolts, Nuts and Fasteners Accessories (PGD 31)

StandardYearTitleIBR
IS 207 (pdf)
IS 207 (txt)
1964Gate and Shutter Hooks and Eyes
IS 451 (pdf)1999Technical Supply Conditions for Wood Screws
IS 530 (pdf)1976solid-woven impregnated hair belting for power transmission
IS 549 (pdf)2005Split Pins
IS 723 (pdf)1972Steel Countersunk Head Wire Nails
IS 724 (pdf)1964Mild Steel and Brass Cup, Ruler and Square Hooks and Screw Eyes
IS 725 (pdf)
IS 725 (txt)
1961Copper Wire Nails
IS 730 (pdf)1978Hook Bolts for Corrugated Sheet Roofing
IS 866 (pdf)
IS 866 (txt)
1957Tinmen's Rivets
IS 1072 (pdf)
IS 1072 (txt)
1996Leaf chains, clevises and sheavesISO 4347
IS 1120 (pdf)1975Coach Screws
IS 1363-1 (pdf)
IS 1363-1 (txt)
2002Hexagon Head Bolts, Screws and Nuts of Product Grade 'C', Part 1: Hexagon Head Bolts (Size Range M 5 to M 64)ISO 4016
IS 1363-2 (pdf)
IS 1363-2 (txt)
2002Hexagon Head Bolts, Screws and Nuts of Product Grade 'C', Part 2: Hexagon Head Screws (Size Range M 5 to M 64)ISO 4018
IS 1363-3 (pdf)
IS 1363-3 (txt)
2002Hexagon Head Bolts, Screws and Nuts of Product Grade C, Part 3: Hexagon Nuts (Size Range M5 to M64)ISO 4034
IS 1364-1 (pdf)
IS 1364-1 (txt)
2002Hexagon Head Bolts, Screws and Nuts of Product Grades A and B, Part 1: Hexagon Head Bolts (Size Range M 1.6 to M 64)ISO 4014
IS 1364-2 (pdf)
IS 1364-2 (txt)
2002Hexagon Head Bolts, Screws and Nuts of Product Grades A and B, Part 2: Hexagon Head Screws (Size Range M 1.6 to M 64)ISO 4017
IS 1364-3 (pdf)
IS 1364-3 (txt)
2002Hexagon Head Bolts, Screws and Nuts of Product Grades A and B, Part 3: Hexagon Nuts, Style 1 (Size Range M 1.6 to M 64)ISO 4032
IS 1364-4 (pdf)
IS 1364-4 (txt)
2003Hexagon Head Bolts, Screws and Nuts of Product Grades A and B, Part 4: Hexagon Thin Nuts (Chamfered) (Size Range M1.6 to M64)ISO 4035
IS 1364-5 (pdf)
IS 1364-5 (txt)
2002Hexagon Head Bolts, Screws and Nuts of Product Grades A and B, Part 5: Hexagon Thin Nuts - Product Grade B (Unchamfered) (Size Range M 1.6 to M 10)ISO 4036
IS 1364-6 (pdf)
IS 1364-6 (txt)
2002Hexagon Head Bolts, Screws and Nuts of Product Grades A and B, Part 6: Hexagon Nuts, Style 2ISO 4033
IS 1365 (pdf)
IS 1365 (txt)
2005Slotted Countersunk Flat Head Screws *common head style) - Product Grade AISO 2009
IS 1366 (pdf)
IS 1366 (txt)
2002Slotted Cheese Head Screws - Product Grade AISO 1207
IS 1367-1 (pdf)
IS 1367-1 (txt)
2002Technical Supply Conditions for Threaded Steel Fasteners, Part 1: General Requirements for Bolts, Screws and StudsISO 8992
IS 1367-2 (pdf)
IS 1367-2 (txt)
2002Technical Supply Conditions for Threaded Steel Fasteners, Part 2: Tolerances for Fasteners - Bolts, Screws, Studs and Nuts - Product Grades A, B and CISO 4759-1
IS 1367-3 (pdf)
IS 1367-3 (txt)
2002Technical Supply Conditions for Threaded Steel Fasteners, Part 3: Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Bolts, Screws and StudsISO 898-1
IS 1367-5 (pdf)
IS 1367-5 (txt)
2002Technical Supply Conditions for Threaded Steel Fasteners, Part 5: Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Set Screws and Similar Threaded Fasteners not Under Tensile StressesISO 898-5
IS 1367-6 (pdf)
IS 1367-6 (txt)
1994Technical Supply Conditions for Threaded Steel Fasteners, Part 6: Mechanical Properties and Test Methods for Nuts with Specified Proof LoadsISO 898-2
IS 1367-7 (pdf)1980Technical supply conditions for threaded steel fasteners, Part VII: Mechanical properties and test methods for nuts without specified proof loads
IS 1367-8 (pdf)
IS 1367-8 (txt)
2002Technical Supply Conditions for Threaded Steel Fasteners, Part 8: Prevailing Torque Type Steel Hexagon Nuts - Mechanical and Performance PropertiesISO 2320
IS 1367-9-1 (pdf)1993Technical supply conditions for threaded steel fasteners, Part 9: Surface discontinuities : Section 1 Bolts, screws and studs for general applicationsISO 6157-1
IS 1367-9-2 (pdf)1993Technical supply conditions for threaded steel fasteners, Part 9: Surface discontinuities : Section 2 Bolts, screws and studs for special applicationsISO 6157-3
IS 1367-10 (pdf)
IS 1367-10 (txt)
2002Technical Supply Conditions for Threaded Steel Fasteners, Part 10: Surface Discontinuities - NutsISO 6157-2
IS 1367-11 (pdf)
IS 1367-11 (txt)
2002Technical Supply Conditions for Threaded Steel Fasteners, Part 11: Electroplated CoatingsISO 4042
IS 1367-12 (pdf)
IS 1367-12 (txt)
1981Technical Supply Conditions for Threaded Steel Fasteners, Part XII: Phosphate Coatings on Threaded Fasteners
IS 1367-13 (pdf)
IS 1367-13 (txt)
1983Technical supply conditions for threaded steel fasteners, Part XIII: Hot-dip galvanized coatings on threaded fasteners
IS 1367-14-1 (pdf)
IS 1367-14-1 (txt)
2002Technical Supply Conditions for Threaded Steel Fasteners, Part 14: Mechanical Properties of Corrosion-Resistant Stainless-Steel Fasteners, Section 1: Bolts, Screws and StudsISO 3506-1
IS 1367-14-2 (pdf)
IS 1367-14-2 (txt)
2002Technical Supply Conditions for - Threaded Steel Fasteners, Part 14: Mechanical Properties of Corrosion-resistant Stainless-steel Fasteners, Section 2: NutsISO 3506-1
IS 1367-14-3 (pdf)
IS 1367-14-3 (txt)
2002Technical Supply Conditions for Threaded Steel Fasteners, Part 14: Mechanical Properties of Corrosion-resistant Stainless-steel Fasteners, Section 3: Set Screws and Similar Fasteners not Under Tensile StressISO 3506-3
IS 1367-14 (pdf)
IS 1367-14 (txt)
1984Technical Supply Conditions for Threaded Steel Fasteners, Part 14: Stainless Steel Threaded Fasteners
IS 1367-16 (pdf)2002Technical Supply Conditions for Threaded Steel Fasteners, Part 16: Designation System for FastenersISO 8991
IS 1367-17 (pdf)
IS 1367-17 (txt)
2005Industrial Fasteners - Threaded steel fasteners - Technical supply conditions, Part 17: Inspection, sampling and acceptance procedureISO 3269
IS 1367-18 (pdf)
IS 1367-18 (txt)
1996Industrial Fasteners - Threaded Steel Fasteners - Technical Supply Conditions, Part 18: Packaging
IS 1367-19 (pdf)
IS 1367-19 (txt)
1997Industrial fasteners - Threaded steel fasteners - Technical supply conditions, Part 19: Axial load fatigue testing of bolts, screws and studsISO 3800
IS 1367-20 (pdf)
IS 1367-20 (txt)
1996Industrial Fasteners - Threaded Steel Fasteners - Technical Supply Conditions - Mechanical Properties, Part 20: Torsional Test and Minimum Torques for Bolts and Screws with Nominal Diameters 1 mm To 10 mmISO 898-7
IS 1368 (pdf)2003Dimensions for ends of parts with external ISO metric threadsISO 4753
IS 1369-1 (pdf)1993Fasteners - Thread Run-Outs and Undercuts, Part 1: Dimensions for Screw Thread Run-Outs for External ISO Metric ThreadsISO 3508
IS 1369-2 (pdf)1993Fasteners - Thread runout and undercuts, Part 2: Dimensions for screw thread undercuts for external ISO metric threadsISO 4755
IS 1369-3 (pdf)
IS 1369-3 (txt)
1995Fasteners - Thread Run-Outs and Undercuts, Part 3: Dimensions for Screw Thread Run-Outs and Undercuts for Internal Threads (Blind Tapped Holes)
IS 1370 (pdf)
IS 1370 (txt)
1993Transmission belting - Friction surface rubber belting
IS 1691 (pdf)
IS 1691 (txt)
1980Cast Iron and Mild Steel Flat Pulleys
IS 1821 (pdf)1987Dimensions for clearance holes for bolts and screwsISO 273
IS 1862 (pdf)1975Studs
IS 1891-1 (pdf)1994Conveyor and Elevator Textile Belting, Part 1: General Purpose Belting
IS 1891-2 (pdf)1993Conveyor and elevator textile belting-Specification, Part 2: Heat resistant belting
IS 1891-3 (pdf)1988Rubber Conveyor and Elevator Textile Belting, Part 3: Oil Resistant Belting
IS 1891-4 (pdf)1978Rubber Conveyor and Elevator Belting, Part IV: Hygienic Belting
IS 1891-5 (pdf)
IS 1891-5 (txt)
1993Conveyor and elevator textile belting, Part 5: Fire resistant belting for surface application
IS 1928 (pdf)
IS 1928 (txt)
1961Boiler Rivets (12 to 48 mm Diameter)
IS 1929 (pdf)1982Hot Forged Steel Rivets for Hot Closing (12 to 36 mm Diameter)
IS 2016 (pdf)
IS 2016 (txt)
1967Plain Washers
IS 2031 (pdf)1987Driving and driven machines - Shaft heightsISO 496
IS 2048 (pdf)
IS 2048 (txt)
1983Parallel Keys and Keyways
IS 2122-1 (pdf)1973Code of practice for selection, storage, installation and maintenance of belting for power transmission, Part I: Flat belt drives
IS 2122-2 (pdf)
IS 2122-2 (txt)
1991Power transmission - Belts - Code of practice for selection, storage, installation and maintenance of belting for power transmission, Part 2: V-belt drive
IS 2155 (pdf)1982Cold Forged Solid Steel Rivets for Hot Closing (6 to 16 mm Diameter)
IS 2232 (pdf)1967Slotted and Castle Nuts
IS 2241 (pdf)1976Round Leather Belting for Small Machines
IS 2269 (pdf)
IS 2269 (txt)
2006Hexagon Socket Head Cap ScrewsISO 4762
IS 2291 (pdf)1990Tangential keys and keywaysISO 3117-1977
IS 2292 (pdf)1974Taper Keys and Keyways
IS 2293 (pdf)1974Gib-head Keys and Keyways
IS 2294 (pdf)1986Woodruff Keys and Keyways
IS 2327 (pdf)
IS 2327 (txt)
1993Straight sided splines for cylindrical shafts with internal centering - Dimensions, tolerances and verification
IS 2393 (pdf)
IS 2393 (txt)
2010PARALLEL PINS, OF UNHARDENED STEEL AND
IS 2403 (pdf)
IS 2403 (txt)
1991Short Pitch Transmission Precision Roller Chains and Chain WheelsISO 606-1982
IS 2467 (pdf)2002International Gear Notation - Symbols for Geometrical DataISO 701
IS 2494-1 (pdf)1994V-Belts - Endless V-Belts for Industrial Purposes, Part 1: General Purpose
IS 2494-2 (pdf)1993V-belts - Endless V-belts for industrial purposes, Part 2: Fire resistant and antistatic V-belts
IS 2535-1 (pdf)
IS 2535-1 (txt)
2004Cylindrical gears for general and heavy engineering ; Part 1 Standard basic rack tooth profileISO 53
IS 2535-2 (pdf)2004Cylindrical gears for general and heavy engineering, Part 2: ModuleISO 54
IS 2585 (pdf)
IS 2585 (txt)
2006Black Square Bolts and Nuts (Diameter Range 6 to 39 mm) and Black Square Screws (Diameter Range 6 to 24 mm)
IS 2609 (pdf)1972Coach Bolts
IS 2610 (pdf)
IS 2610 (txt)
1989Power transmission - Straight sided splines for machine tools - Dimensions
IS 2636 (pdf)1972Wing Nuts
IS 2637 (pdf)
IS 2637 (txt)
2004Steel roller chains Type S and C, Attachments and chain wheelsISO 487
IS 2638 (pdf)1974Flat Split Cotters
IS 2687 (pdf)
IS 2687 (txt)
1991Cap nuts
IS 2693 (pdf)
IS 2693 (txt)
1989Power Transmission - Bush Type Flexible Coupling
IS 2907 (pdf)
IS 2907 (txt)
1998Non-Ferrous Rivets
IS 2998 (pdf)1982Cold Forged Steel Rivets for Cold Closing (1 to 16 mm Diameter)
IS 3063 (pdf)
IS 3063 (txt)
1994Fasteners - Single coil rectangular section spring lock washers
IS 3142 (pdf)
IS 3142 (txt)
1993Pulleys-V-Grooved Pulleys for Endless V-Belts Sections Z, A, B, C, D and E and Endless Wedge Belts Sections SPZ, SPA, SPB and SPC
IS 3181 (pdf)1992Conveyor belts - Fire resistant conveyor belting for underground mines and such other hazardous applications
IS 3460 (pdf)
IS 3460 (txt)
1991Knurled nuts
IS 3468 (pdf)1991Pipe nuts
IS 3524-1 (pdf)1982Threaded Taper Pins, Part I: With Internal Threads
IS 3524-2 (pdf)1982Threaded Taper Pins, Part II: With External Threads
IS 3542 (pdf)
IS 3542 (txt)
1980Extended Pitch Transmission Precision Roller Chains and Chain Wheel
IS 3560 (pdf)
IS 3560 (txt)
1980Short Pitch Transmission Precision Bush Chains and Chain Wheels
IS 3640 (pdf)1982Hexagon Fit Bolts
IS 3654 (pdf)
IS 3654 (txt)
1966Dimensions for straight sided serrations
IS 3665 (pdf)
IS 3665 (txt)
1966Dimensions for involute sided splines
IS 3681 (pdf)
IS 3681 (txt)
1995Gears - Cylindrical Gears - Accuracies
IS 3688 (pdf)
IS 3688 (txt)
1990Power transmission - Shafts - Dimensions for cylindrical and 1/10 conical shaft endsISO/TR 775
IS 3726 (pdf)
IS 3726 (txt)
2003Thumb Screws
IS 3727 (pdf)
IS 3727 (txt)
1966Wing Screws
IS 3734 (pdf)
IS 3734 (txt)
1983Dimensions for worm gearing
IS 3756 (pdf)
IS 3756 (txt)
2002Method for Gear Correction - Addendum Modification for External Cylindrical Gears with Parallel Axes
IS 3757 (pdf)
IS 3757 (txt)
1985High Strength Structural Bolts
IS 3974 (pdf)
IS 3974 (txt)
1967Bifurcated Rivets for General Purposes
IS 4040 (pdf)1998Fasteners - Solid Drilled Tubular and Semi-Tubular Rivets
IS 4071 (pdf)
IS 4071 (txt)
1986Master Gears
IS 4172 (pdf)2005Dimensions for radii under the head of bolts and screwsISO 885
IS 4206 (pdf)1987Dimensions for nominal lengths and thread lengths for bolts, screws and studsISO 888
IS 4278 (pdf)1988Flexible Shafts for Speedometers and Tachographs
IS 4460-1 to 3 (pdf)1995Gears - Spur and Helical Gears - Calculation of Load Capacity
IS 4499 (pdf)1968Dimensions for Depth of Holes for Studs
IS 4600 (pdf)1968Flexible Shafts
IS 4732 (pdf)1968Rivets for Shipbuilding
IS 4757 (pdf)
IS 4757 (txt)
1980Wrapped Bushes
IS 4762 (pdf)2002Worm Drive Hose Clamps for General Purposes
IS 4774-1 (pdf)1982Thin-walled Half Bearing, Part I: Plain Bearing
IS 4774-2 (pdf)
IS 4774-2 (txt)
1982Thin-walled Half Bearings, Part II: Flanged Bearing
IS 5037-1 (pdf)2004Straight bevel gears for general engineering and heavy engineering, Part 1: Basic rackISO 677
IS 5037-2 (pdf)2004Straight bevel gears for general engineering and heavy engineering, Part 2: Module and diametral pitchesISO 678
IS 5267 (pdf)
IS 5267 (txt)
2002Vocabulary of Gear Terms - Definitions Related to Worm Gear GeometryISO 1122-2
IS 5368 (pdf)1969Thin Slotted and Castle Nuts (dia range 6 to 52 mm)
IS 5369 (pdf)1975General Requirements for Plain Washers and Lock Washers
IS 5370 (pdf)1969Plain Washers with Outside Diameter 3 X Inside Diameter
IS 5371 (pdf)1982- Multi-tooth Lock Washers
IS 5372 (pdf)1975Taper washers for channels (ISMC)
IS 5373 (pdf)1969Square washers for wood fastenings
IS 5374 (pdf)1975Taper washers for I-beams (ISMB)
IS 5375 (pdf)1979Data for procurement of cylindrical gears
IS 5554 (pdf)1991Lock washers with lug
IS 5556 (pdf)
IS 5556 (txt)
1991Serrated Lock Washers
IS 5593 (pdf)1980Belt Fasteners (Alligator Type)
IS 5624 (pdf)
IS 5624 (txt)
1993Foundation bolts
IS 5635 (pdf)
IS 5635 (txt)
1983Automotive V-Belt Drives
IS 5957 (pdf)2003Screw Threads for Thread Forming Tapping Screws - DimensionsISO 1478-1999
IS 6094-1 (pdf)
IS 6094-1 (txt)
2006Hexagon Socket Set Screws, Part 1: With flat pointISO 4026
IS 6094-2 (pdf)
IS 6094-2 (txt)
2006Hexagon socket set screws, Part 2: With cone pointISO 4027
IS 6094-3 (pdf)
IS 6094-3 (txt)
2006Hexagon socket set screws, Part 3: With Dog pointISO 4028
IS 6094-4 (pdf)
IS 6094-4 (txt)
2006Hexagon socket set screws, Part 4: With cup pointISO 4029
IS 6101 (pdf)
IS 6101 (txt)
2005Slotted Pan Head Screws - Product Grade AISO 1580
IS 6113 (pdf)1970Aluminium Fasteners for Building Purposes
IS 6166 (pdf)1971Thin Taper Keys and Keyways
IS 6167 (pdf)1971Thin Parallel Keys and Keyways
IS 6196 (pdf)1971Dimensions for fitted half-couplings
IS 6276 (pdf)1971Flexible Shafts Used in Concrete Vibrators
IS 6535 (pdf)1979Data for procurement of straight bevel gears
IS 6580 (pdf)1972Train Lighting Belt Fasteners
IS 6610 (pdf)1972Heavy Washers for Steel Structures
IS 6623 (pdf)
IS 6623 (txt)
2004High Strength Structural Nuts
IS 6639 (pdf)1972Hexagon Bolts for Steel Structures
IS 6649 (pdf)1985Hardened and Tempered Washers for High Strength Structural Bolts and Nuts
IS 6687 (pdf)
IS 6687 (txt)
2002Code of Practice for Selection, Storage, Installation and Maintenance of Conveyor Belting
IS 6688 (pdf)2005Taper Pins
IS 6689 (pdf)
IS 6689 (txt)
2003Parallel Pins of Hardened Steel and Martensitic Stainless Steel (Dowel Pins)ISO 8734
IS 6730 (pdf)1972Felt Nails
IS 6732 (pdf)1972Double Point Nails
IS 6733 (pdf)1972Wall and Roofing Nails
IS 6734 (pdf)1972Cut Lath and Lath Nails
IS 6735 (pdf)
IS 6735 (txt)
1994Fasteners - Spring lock washers for screws with cylindrical heads
IS 6736 (pdf)1972Slotted Raised Countersunk Head Wood Screws
IS 6738 (pdf)1972Panel pins and lost head nails
IS 6739 (pdf)1972Slotted round head wood screws
IS 6755 (pdf)1980Double coil helical spring washers
IS 6760 (pdf)1972Slotted Countersunk Head Wood Screws
IS 6761 (pdf)
IS 6761 (txt)
1994Fasteners - Countersunk Head Screws with Hexagon Socket
IS 6821 (pdf)
IS 6821 (txt)
1973Methods for sampling non-threaded fasteners
IS 6862 (pdf)2005Clevis Pins without head
IS 6863 (pdf)
IS 6863 (txt)
2005Clevis Pins with Head
IS 7002 (pdf)
IS 7002 (txt)
2005Prevailing Torque Type Hexagon Nuts (With Non-Metallic Insert), Style 1 - Property Classes 5,8 and 10
IS 7169 (pdf)1989Slotted raised countersunk (oval) head tapping screws (common head style)ISO 1483-1983
IS 7170 (pdf)1989Slotted countersunk (flat) head tapping screws (common head style)ISO 1482-1983
IS 7173 (pdf)1989Slotted pan head tapping screwsISO 1481-1983
IS 7178 (pdf)
IS 7178 (txt)
2002Heat-Treated Steel Tapping Screws - Mechanical PropertiesISO 2702
IS 7368 (pdf)
IS 7368 (txt)
2005Grooved pins - Full length taper groovedISO 8744
IS 7383 (pdf)
IS 7383 (txt)
2005Grooved pins - One-Third-length centre groovedISO 8742
IS 7384 (pdf)
IS 7384 (txt)
2005Grooved pins - Full-Length Parallel Grooved, with PilotISO 8739
IS 7385 (pdf)
IS 7385 (txt)
2005Grooved Pins - Half - Length Taper GroovedISO 8745
IS 7386 (pdf)
IS 7386 (txt)
2005Grooved Pins - Half-Length Reverse Taper GroovedISO 8741
IS 7403 (pdf)
IS 7403 (txt)
1974Code of practice for selection of standard worm and helical gear boxes
IS 7443 (pdf)
IS 7443 (txt)
2002Methods for Load Rating of Worm Gears
IS 7478 (pdf)2011Cross Recesses for ScrewsISO 4757:1983
IS 7479 (pdf)1985Specification for Recess Penetration Gauges
IS 7483 (pdf)
IS 7483 (txt)
2005Cross Recessed Pan Head Screws
IS 7485-1 (pdf)
IS 7485-1 (txt)
2005Countersunk flat head screws (common head style) with type H or Type Z cross Races - Products Grade A, Part 1: Steel of property class 4.8ISO 7046-1
IS 7485-2 (pdf)
IS 7485-2 (txt)
2005Countersunk flat head screws (common head style) with type H or Type Z cross recess - Product Grade A, Part 2: Steel of property class 8.8, stainless steel and non-ferrous metalsISO 7046-2
IS 7485 (pdf)1985Cross Recessed Countersunk Head Screws
IS 7486 (pdf)
IS 7486 (txt)
2005Countersunk raised head screws (common head style) with type H or type Z cross access - Product Grade AISO 7047
IS 7504 (pdf)
IS 7504 (txt)
1995Gears - Cylindrical Gears - Accuracies - Methods of inspection
IS 7519 (pdf)1974Hammer Drive Screws
IS 7790 (pdf)
IS 7790 (txt)
1991Domed cap nuts
IS 7795 (pdf)2004Hexagon Nuts with Collar
IS 7800 (pdf)1990Thread cutting tapping screw - Screw threads and ends - Dimensions
IS 7923 (pdf)1985Glossary of terms and definitions relating to drives using V-belts and grooved pulleys
IS 8033 (pdf)1976Round Washers with Square Hole for Wood Fastenings
IS 8068 (pdf)1976Tab Washers
IS 8070 (pdf)
IS 8070 (txt)
1991Screws - Slotted capstan (tommy bolts)
IS 8217 (pdf)1976Dimensions for pipe thread runouts and undercuts
IS 8351 (pdf)1977Spiral Pins (Heavy Duty Type)
IS 8352 (pdf)1977Flat Countersunk Square Neck Bolts
IS 8353 (pdf)1977Flat Countersunk Nib Bolts
IS 8379 (pdf)1977Spiral Pins (Medium Duty Type)
IS 8412 (pdf)1977Slotted Countersunk Head Bolts for Steel Structures
IS 8535 (pdf)
IS 8535 (txt)
1987Bolts, screws, nuts and accessories - Terminology and nomenclatureISO 1891
IS 8536 (pdf)1987Fasteners - Bolts, screws, studs and nuts - Symbols and designation of dimensionsISO 225
IS 8721 (pdf)1978Fish Bolts (Cup Oval Neck Bolts) for Collieries
IS 8722 (pdf)1978Fish bolt with square head for collieries
IS 8777 (pdf)
IS 8777 (txt)
2008Agricultural machinery - Endless variable-speed V-belts and groove sections of corresponding pulleysISO 3410
IS 8822 (pdf)1978Slotted mushroom head roofing bolts
IS 8830 (pdf)
IS 8830 (txt)
2007Calculation of Load capacity of spur and helical gear - Application to marine gearsISO 9083
IS 8843 (pdf)
IS 8843 (txt)
1978Accuracy requirements for turbine gears
IS 8856 (pdf)
IS 8856 (txt)
1991Hexagon weld nuts
IS 8869 (pdf)1978Washers for Corrugated Sheet Roofing
IS 8911 (pdf)
IS 8911 (txt)
2005Countersunk Slotted Raised Countersunk Head Screws (common head style ) - Product Grade AISO 2020
IS 9405 (pdf)1980Method of test for conveyor belt fasteners
IS 9515 (pdf)1980Link V-Belts
IS 9519 (pdf)2005Fasteners - Hexagon products - Width across flats
IS 9549 (pdf)1980Dimensions for split pin holes, wire holes and head slots for bolts
IS 10022 (pdf)1981Open Ended Cogged V-Belting
IS 10102 (pdf)1982Technical supply conditions for rivets
IS 10185 (pdf)1982Data for procurement of worm and wormwheels
IS 10213 (pdf)1982Sandwich Belting
IS 10229 (pdf)1982Open End V-belts
IS 10238 (pdf)
IS 10238 (txt)
2001Fasteners - Threaded Steel Fastener - Step Bolts for Steel Structures
IS 10248-1 (pdf)
IS 10248-1 (txt)
2011Parellel Pins with Internal Thread, Part 1: Unhardened Steel and Austenitic Stainless Steel
IS 10248-2 (pdf)
IS 10248-2 (txt)
2011Parallel Pins with Internal Thread, Part 2: Hardened Steel and Martensitic Stainless Steel
IS 10248 (pdf)1982Cylindrical Pins with Internal Threads
IS 10288 (pdf)1982Belt-Fasteners, Plate Type
IS 10686 (pdf)1983Mechanical Multi-disc Clutches (Wet Type)
IS 10911 (pdf)
IS 10911 (txt)
1984Methods of inspection for straight bevel gears
IS 11038 (pdf)1984Endless Hexagonal Belts for Agricultural Machinery and Groove Section of Corresponding Pulleys
IS 11362 (pdf)1985Head configuration and gauging of countersunk head screwsISO 7721
IS 11507 (pdf)
IS 11507 (txt)
2009Synchronous Belt Drive -PulleysISO 5294
IS 11740 (pdf)
IS 11740 (txt)
1986Chains for Motorcycles
IS 11842 (pdf)1986PVC/plastic Hygienic Belting
IS 11863 (pdf)1986Tolerances for worm gears
IS 12091 (pdf)1987Belt Fasteners, Hook Type
IS 12405 (pdf)1988Gear Type Flexible Couplings
IS 12427 (pdf)
IS 12427 (txt)
2001Fasteners - Threaded Steel Fasteners - Hexagon Head Transmission Tower Bolts
IS 12854 (pdf)
IS 12854 (txt)
1989Power transmission - Belts,endless flat (used in lenix drive system)
IS 12952 (pdf)
IS 12952 (txt)
2005Grooved Pins - Full-Length Parallel Grooved, with ChamferISO 8740
IS 12982 (pdf)1991Pins and grooved pins - Shear testISO 8749
IS 13096 (pdf)
IS 13096 (txt)
2000Fasteners - Hexagon Nuts with Specified Proof Load Values - Fine Pitch Thread - Mechanical PropertiesISO 896-6
IS 13722 (pdf)
IS 13722 (txt)
2002Hexagon Nuts, Style 1, with Metric Fine Pitch Thread - Product Grades A and BISO 8673
IS 13723 (pdf)
IS 13723 (txt)
2002Hexagon Nuts Style 2 with Metric Fine Pitch Thread - Product Grades A and BISO 8674
IS 13724 (pdf)
IS 13724 (txt)
2002Hexagon Thin Nuts (Chamfered) with Metric Fine Pitch Thread - Product Grades A and BISO 8675
IS 13725 (pdf)
IS 13725 (txt)
2002Hexagon Head Screws with Metric Fine Pitch Thread - Product Grades A and BISO 8676
IS 13726 (pdf)
IS 13726 (txt)
2002Hexagon Head Bolts with Metric Fine Pitch Thread - Product Grades A and BISO 8765
IS 13775-1 (pdf)
IS 13775-1 (txt)
1993Conveyor belting - Solid woven cotton/synthetic impregnated and unimpregnated, Part 1: Aeroslide belting for air gravity conveyor
IS 13926 (pdf)
IS 13926 (txt)
2005Cranked-Link drag chains of welded construction, Attachments and sprocketsISO 6971
IS 13927 (pdf)
IS 13927 (txt)
2005Cranked-link mill chains or welded construction, attachments and sprocketsISO 6972
IS 14206-1 (pdf)
IS 14206-1 (txt)
1995On-site non-mechanical jointing of plied textile reinforced rubber conveyor belting, Part I: Hot vulcanizing - Code of practice
IS 14206-2 (pdf)
IS 14206-2 (txt)
2001On-site Non-mechanical Jointing of Plied Textile Reinforced Rubber Conveyor Belting - Code of Practice, Part 2: Cold Vulcanizing
IS 14261 (pdf)
IS 14261 (txt)
1995Transmission Devices - V-belts - Endless Narrow V-belts for Industrial Use
IS 14285 (pdf)
IS 14285 (txt)
1995Transmission devices - Flexible coupling - Tyre type
IS 14394 (pdf)
IS 14394 (txt)
1996Industrial Fasteners - Hexagon Nuts of Product Grade C - Hot-Dip Galvanized (Size Range M12 to M36)
IS 14696 (pdf)
IS 14696 (txt)
2000Transmission Steel Roller Chains and Chain Wheels for Oil Field Applications
IS 14894 (pdf)
IS 14894 (txt)
2001Fasteners - Hexagon Head Bolts of Product Grade B - Reduced Shank (Shank Diameter Pitch Diameter)
IS 15143 (pdf)
IS 15143 (txt)
2002Conveyor Belting of Elastomeric and Steel Cord Construction for Underground Mines and Such Other Hazardous Applications
IS 15146 (pdf)
IS 15146 (txt)
2002Belt Drives -- Pulleys -- Limiting Values for Adjustment of CentresISO 155
IS 15147 (pdf)
IS 15147 (txt)
2002Belt Drives -- Pulleys -- Quality, Finish and BalanceISO 254
IS 15148 (pdf)
IS 15148 (txt)
2002Belt Drives - V-Ribbed Belts, Joined V-Belts and V-Belts Including Wide Section Belts and Hexagonal Belts - Electrical Conductivity of Antistatic Belts : Characteristics and Methods of TestISO 1813
IS 15149 (pdf)
IS 15149 (txt)
2002Belt Drives - Pulleys and V-Ribbed Belts for the Automotive Industry -- PK Profile : DimensionsISO 9981
IS 15151 (pdf)
IS 15151 (txt)
2002Belt Drives - Pulleys and V-Ribbed Belts for Industrial Applications - PH, PJ, PK, PL and PM Profiles : DimensionsISO 9982
IS 15274 (pdf)
IS 15274 (txt)
2003Tolerances for Fasteners - Plain Washers for Bolts, Screws and Nuts - Product Grades A and CISO 4759-3
IS 15427 (pdf)
IS 15427 (txt)
2004Conveyor Belting of Elastomeric and Steel Cord Construction for General Material HandlingIS 15143
IS 15509 (pdf)
IS 15509 (txt)
2004Double-pitch precision roller chains and sprockets for transmission and conveyorsISO 1275
IS 15510 (pdf)
IS 15510 (txt)
2004Heavy-Duty Cranked-Link Transmission ChainsISO 3512
IS 15511 (pdf)
IS 15511 (txt)
2004Cycle Chains - Characteristics and Test MethodsISO 9633
IS 15568 (pdf)2005Cone proof load test on nutsISO 10485
IS 15569 (pdf)2005Widening test on nutsISO 10484
IS 15581 (pdf)
IS 15581 (txt)
2005Hexagon Nuts with Flange - Coarse Thread
IS 15582 (pdf)
IS 15582 (txt)
2005Hexagon Flange Bolts - Small SeriesISO 4162
IS 15628 (pdf)
IS 15628 (txt)
2005Slotted set screws with flat pointISO 4766
IS 15629 (pdf)
IS 15629 (txt)
2005Slotted set screws with cone pointISO 7434
IS 15630 (pdf)
IS 15630 (txt)
2005Slotted set screws with long dog pointISO 7435
IS 15631 (pdf)
IS 15631 (txt)
2005Slotted set screws with cup pointISO 7436
IS 15705 (pdf)2006Gauging of hexagon socketsISO 23429
IS 15790 (pdf)
IS 15790 (txt)
2008Fatigue test method for transmission precision roller chainsISO 15654

Last Updated: September 6, 2013