Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.
Division Name: Production and General Engineering
Section Name: Machine Tools (PGD 3)
| Standard | Year | Title | IBR |
|---|---|---|---|
| IS 1878-1 (pdf) IS 1878-1 (txt) | 1993 | Test chart for general purpose parallel lathes, Part 1: Lathes with swing over bed up to 800 mm | ISO 1708 |
| IS 1878-2 (pdf) IS 1878-2 (txt) | 1992 | Test chart for general purpose parallel lathes, Part 2: Lathes with swing over bed over uo to 800 mm and up to 1600 mm | ISO 1708 |
| IS 1878-3 (pdf) IS 1878-3 (txt) | 1998 | Test chart for general purpose parallel lathes, Part 3: Lathes with swing over bed over 1600mm ad upto 2500mm | |
| IS 2063-1 (pdf) IS 2063-1 (txt) | 2002 | Test Code for Machine Tools, Part 1: Geometric Accuracy of Machines Operating Under No-load or Finishing Conditions | ISO 230-1 |
| IS 2063-2 (pdf) IS 2063-2 (txt) | 2002 | Test Code for Machine Tools, Part 2: Determination of Accuracy and Repeatability of Positioning Numerically Controlled Axes | ISO 230-2 |
| IS 2182 (pdf) IS 2182 (txt) | 1993 | Symbols to be given on indication plates of machine tools - Recommendations | |
| IS 2199 (pdf) IS 2199 (txt) | 1989 | Radial drilling machines - Test chart | |
| IS 2200-2 (pdf) IS 2200-2 (txt) | 2002 | Test Conditions for Milling Machines with Table of Variable Height - Testing of Accuracy, Part 2: Machines with Horizontal Spindle | ISO 1701-2 |
| IS 2200-3 (pdf) IS 2200-3 (txt) | 2002 | Test Conditions for Milling Machines with Table of Variable Height - Testing of Accuracy, Part 3: Machines with Vertical Spindle | ISO 1701-3 |
| IS 2218 (pdf) IS 2218 (txt) | 1999 | Speeds and feeds for machine tools | |
| IS 2219 (pdf) | 1962 | Feeds for Machine Tools | |
| IS 2308 (pdf) IS 2308 (txt) | 1989 | Test chart for slotting machines | |
| IS 2310 (pdf) | 1989 | Test chart for shaping machines | |
| IS 2367 (pdf) | 1981 | Test chart for box type vertical drilling machines | |
| IS 2368 (pdf) IS 2368 (txt) | 1993 | Test Charts for External Cylindrical Grinding Machines with a Movable Table | |
| IS 2425 (pdf) IS 2425 (txt) | 1982 | Test chart for pillar type vertical drilling machines | ISO 2773/1 |
| IS 2426 (pdf) | 1985 | Test chart for bench drilling machines | ISO 2773/1 |
| IS 2538 (pdf) | 1963 | Test chart for bench grinders | |
| IS 2743 (pdf) IS 2743 (txt) | 1992 | Test chart for surface grinding machines with horizontal grinding wheel spindle and reciprocating table | ISO 1986 |
| IS 2877 (pdf) IS 2877 (txt) | 1986 | Test chart for single and double column planing machines | |
| IS 2987 (pdf) | 1992 | Direction of operation of controls for machine tools - Recommendations | ISO 447 |
| IS 3080 (pdf) IS 3080 (txt) | 1965 | Test chart for universal tool and cutter grinders | |
| IS 3405 (pdf) | 1966 | Test chart for power hacksaw machines (up to 300 mm round bar capacity) | |
| IS 3691 (pdf) IS 3691 (txt) | 1990 | Woodworking machines - Table bandsawing machines-Nomenclature and acceptance conditions | ISO 7007 |
| IS 3694 (pdf) IS 3694 (txt) | 1991 | Test chart for woodworking turning lathes | ISO 7987:85 |
| IS 6040 (pdf) IS 6040 (txt) | 1993 | Test chart for precision lathes - Lathes with swing over bed up to 500 mm and distance between centres up to 1500 mm | ISO 1708 |
| IS 6197 (pdf) | 1971 | Test chart for vertical boring and turning mills with table diameter up to 1600 mm | |
| IS 6679 (pdf) | 1972 | Test chart for general purpose gear shaping machines (Table diameter up to 1000 mm) | |
| IS 6893-1 (pdf) | 1988 | Proforma for purchase specification for machine tools, Part 1: General purpose parallel lathes and precision lathes | |
| IS 6893-2 (pdf) | 1987 | Proforma for purchase specification for machine tools, Part 2: Horizontal/universal knee-type milling machines | |
| IS 6893-3 (pdf) | 1988 | Proforma for purchase specification for machine tools, Part 3: Radial drilling machines | |
| IS 6893-4 (pdf) | 1987 | Proforma for purchase specification for machine tools, Part 4: Vertical turning and boring lathes | |
| IS 6893-5 (pdf) | 1987 | Proforma for purchase specification for machine tools, Part 5: Milling machine with table of variable height with vertical spindle | |
| IS 6893-6 (pdf) | 1985 | Proforma for purchase specification for machine tools, Part 6: Bench/pillar type drilling machines | |
| IS 6893-7 (pdf) IS 6893-7 (txt) | 1990 | Proforma for purchase specification for machine tools, Part 7: External cylindrical grinding machines with horizontal spindle | |
| IS 6893-8 (pdf) | 1992 | Proforma for purchase specification for machine tools, Part 8: Internal cylindrical grinding machines with horizontal spindle | |
| IS 6893-9 (pdf) IS 6893-9 (txt) | 1990 | Proforma for Purchase Machine Tools, Part 9: Surface Grinders with Horizontal Axis | |
| IS 6893-10 (pdf) | 1992 | Proforma for purchase specification for machine tools, Part 10: Copying lathes | |
| IS 6893-11 (pdf) IS 6893-11 (txt) | 1992 | Proforma for purchase specification for machine tools, Part 11: Capstan and turret lathes | |
| IS 6893-12 (pdf) | 1992 | Proforma for purchase specification for machine tools, Part 12: Horizontal boring and milling machines (table type) | |
| IS 7227 (pdf) | 1974 | Recommended diameters of wheels for woodworking table bandsawing machines | |
| IS 7228 (pdf) | 1983 | Recommended spindle diameters for woodworking machines with rotating bored tools | ISO 7006 |
| IS 7229 (pdf) | 1974 | Recommended working level heights for woodworking machines | |
| IS 7249 (pdf) IS 7249 (txt) | 1993 | Woodworking machines - Thickness planing machines with rotary cutterblock of one-side dressing - Nomenclature and acceptance conditions | ISO 7568 |
| IS 7258 (pdf) IS 7258 (txt) | 1990 | Woodworking Machines - Single Spindle Moulding Machines - Nomenclature and Acceptance Conditions | ISO 7009-1983 |
| IS 7266 (pdf) IS 7266 (txt) | 1991 | Test chart for woodworking slot mortising machines | ISO 7946 |
| IS 7267 (pdf) IS 7267 (txt) | 1991 | Test chart for woodworking surface planing machines with cutterblock for one-side dressing | ISO 7571-1985 |
| IS 7279 (pdf) IS 7279 (txt) | 1992 | Test Chart for Woodworking Single Spindle Boring Machines | ISO 7945-1985 |
| IS 7286 (pdf) | 1991 | Test chart for woodworking single chain mortising machines | ISO 7950 |
| IS 7287 (pdf) | 1974 | Recommended working dimensions of woodworking machines | |
| IS 7289 (pdf) IS 7289 (txt) | 1992 | Test chart for woodworking planing machines for two, three or four-side dressing | ISO 7569 |
| IS 7294 (pdf) IS 7294 (txt) | 1990 | Woodworking machines - Single blade circular saw benches with or without travelling table - Nomenclature and acceptance conditions | ISO 7008 |
| IS 7296 (pdf) IS 7296 (txt) | 1992 | Test Chart for Woodworking Surface Planing and Thickness Machines | ISO 7570 |
| IS 8099 (pdf) | 1976 | Sizes of collars for circular saw blades for woodworking machines | |
| IS 8107 (pdf) IS 8107 (txt) | 1993 | Wood working machines - Routing machines - Nomenclature and acceptance conditions | ISO 7948 |
| IS 8131 (pdf) | 1976 | Test chart for circular tables for machine tools (table diameter up to 630 mm) | |
| IS 8165 (pdf) IS 8165 (txt) | 2010 | Test chart for manually operated dividing heads for machine tools | |
| IS 8407 (pdf) IS 8407 (txt) | 2010 | Acceptance Conditions for Gear Hobbing Machines - Testing of the Accuracy | |
| IS 8964 (pdf) IS 8964 (txt) | 1999 | Safety Conditions for Woodworking Machines - Recommendations | |
| IS 9474 (pdf) IS 9474 (txt) | 1980 | Principles of Mechanical Guarding of Machinery | |
| IS 9722 (pdf) | 1981 | Dimensions for modular units for machine tool construction-slide units | ISO 2562 |
| IS 9723 (pdf) | 1981 | Dimensions for modular units for machine tool construction-multi-spindle heads- casing and input drive shaft dimensions | ISO 2912 |
| IS 9737 (pdf) | 1981 | Dimensions for Modular Units for Machine Tool Construction - Headstocks | ISO 2727 |
| IS 9809 (pdf) | 1981 | Test chart for crankshaft grinding machines | ISO 2433 |
| IS 10188 (pdf) | 1982 | Dimensions for modular units for machine tool construction - wing bases for columns | ISO 2934 |
| IS 10190 (pdf) | 1982 | Test chart for copying lathes with horizontal spindle-lathes with swing over bed upto 500 mm and distance between centres up to 1500 mm | ISO 1708 |
| IS 10352 (pdf) IS 10352 (txt) | 1992 | Test Charts for Internal Cylindrical Grinding Machines with Horizontal Spindle | ISO 2407 |
| IS 10575 (pdf) | 1983 | Dimensions for modular units for machine tool construction - Rotary tables | ISO 3371 |
| IS 10576 (pdf) | 1983 | Dimensions for modular units for machine tool construction - Wing bases for slide units | ISO 2769 |
| IS 10941 (pdf) | 1984 | Sizes for dovetail guideways for machine tools | |
| IS 10949 (pdf) IS 10949 (txt) | 1984 | Code of practice for painting procedure for machine tools | |
| IS 10988 (pdf) IS 10988 (txt) | 1984 | Method of measuring noise from machine tools (excluding testing in anechoic chambers) | |
| IS 11011 (pdf) IS 11011 (txt) | 1984 | Glossary of terms relating to wood working machines | |
| IS 11016 (pdf) IS 11016 (txt) | 1984 | General safety requirements for machine tools and their operation | |
| IS 11107 (pdf) | 1984 | Dimensions for modular units for machine tool construction - columns | ISO 3589 |
| IS 11118 (pdf) IS 11118 (txt) | 1997 | Guidelines for technical evaluation of general purpose parallel lathes | |
| IS 11133 (pdf) IS 11133 (txt) | 1984 | Recommendations for symbols for lubrications appearing on machine tools | ISO 5169 |
| IS 11398-1 (pdf) IS 11398-1 (txt) | 1985 | Test chart for horizontal spindle capstan, turret and single spindle automatic lathes, Part 1: Machinable bar diameters greater than 25 mm | ISO 6155-1 |
| IS 11398-2 (pdf) IS 11398-2 (txt) | 1992 | Test charts for horizontal spindle capstain, turret and single spindle automatic lathes, Part 2: Machinable bar dia. 25 mm or less and chuck dia. upto 160 mm | ISO 6155-2 |
| IS 11648 (pdf) | 1986 | Nomenclature for modular machine tools | |
| IS 11846 (pdf) | 1987 | Dimensions for modular units for machine tool construction - Tenon drive and flanges for mounting multi-spindle heads | ISO 3476 |
| IS 11958-1 (pdf) IS 11958-1 (txt) | 1987 | Test chart for boring and milling machines with horizontal spindle, Part 1: Table type machines | ISO 3070-1 |
| IS 11958-2 (pdf) IS 11958-2 (txt) | 1992 | Test Chart for Boring and Milling Machines with Horizontal Spindle, Part 2: Floor Type Machines | ISO 3070-2 |
| IS 12106 (pdf) IS 12106 (txt) | 1987 | Dimensions for modular units for machine tool construction - spindle units | |
| IS 12295 (pdf) IS 12295 (txt) | 2000 | Acceptance Conditions for External Cylindrical Centreless Grinding Machines - Testing of the Accuracy | ISO 3875 |
| IS 12296 (pdf) | 1988 | Test Chart for Thread Rolling Machines With Cylindrical Dies | |
| IS 12850 (pdf) | 1987 | Modular units for machine tool construction - Support brackets | ISO 3650 |
| IS 13543 (pdf) | 1992 | Modular units for machine tool construction - Centre bases and columns | ISO 2891 |
| IS 13552 (pdf) IS 13552 (txt) | 1992 | Test charts for surface grinding machines with vertical grinding wheel spindle and reciprocating table | ISO 1985 |
| IS 13634 (pdf) IS 13634 (txt) | 1993 | General introduction for milling machines with table of variable height, with horizontal or vertical spindle | ISO 1701-0 |
| IS 13635 (pdf) IS 13635 (txt) | 1993 | Numerical control of machines - Symbols | ISO 2972 |
| IS 13640 (pdf) | 1993 | General introduction for milling machines with table of fixed height, with horizontal or vertical spindle | ISO 1984-0 |
| IS 13934 (pdf) IS 13934 (txt) | 1994 | Test charts for surface grinding machines with two columns for grinding slideways | ISO 4703 |
| IS 13993 (pdf) | 1994 | Test chart for universal milling machine with a swiveling table | ISO 1701 |
| IS 15250-1 (pdf) IS 15250-1 (txt) | 2002 | Test Conditions for Machining Centres, Part 1: Geometric Tests for Machines with Horizontal Spindle and with Accessory Heads (Horizontal Z-Axis) | ISO 10791-1 |
| IS 15649 (pdf) | 2006 | Machine tools chip bins for chip conveyor | |
| IS/ISO 5170 (pdf) IS/ISO 5170 (txt) | 1977 | Machine Tools - Lubrication Systems | ISO 5170:1977 |
| IS/ISO 7572 (pdf) IS/ISO 7572 (txt) | 1984 | Conditions of Acceptance and Installation for Work-holding Fixed Tables of Machine Tools | ISO 7572:1984 |
| IS/ISO 8636-1 (pdf) IS/ISO 8636-1 (txt) | 1987 | Test Chart for Plano-Milling Machines, Part 1: Portal-Type Machines | ISO 8636-1:1987 |
Last Updated: September 6, 2013
↑