Divisional Index ↑

Public Safety Standards of the Republic of India

Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.

Division Name: Production and General Engineering
Section Name: Engineering Metrology (PGD 25)

StandardYearTitleIBR
IS 2092 (pdf)1983Plunger Type Dial Gauges
IS 2103 (pdf)
IS 2103 (txt)
1980Engineer's Squares
IS 2220 (pdf)1990Engineering metrology - Steel straightedges
IS 2251 (pdf)
IS 2251 (txt)
1986Plug and Ring Gauges for Self Holding Tapers
IS 2285 (pdf)
IS 2285 (txt)
2003Engineering Metrology - Measuring Equipment - Cast Iron Surface PlatesISO 8512-1
IS 2334 (pdf)
IS 2334 (txt)
2001ISO General Purpose Metric Screw Threads - Gauges and GaugingISO 1502
IS 2554 (pdf)1971Cast Iron Angle Plates
IS 2921 (pdf)1988Vernier Height Gauges
IS 2949 (pdf)
IS 2949 (txt)
1992Engineering metrology - Plain V-blocks for inspection purposes
IS 2966 (pdf)1964Internal Micrometers (Including Stick Micrometers)
IS 2967 (pdf)
IS 2967 (txt)
1983External Micrometer
IS 2984 (pdf)
IS 2984 (txt)
2003Slip Gauges [ISO Title : Geometrical Product Specifications (GPS) - Length Standard : Gauge Blocks]ISO 3650
IS 3073 (pdf)1967Assessment of Surface Roughness
IS 3179 (pdf)1990Engineering metrology - Feeler gauges
IS 3455-1 (pdf)1985Gauging Practice for Plain Workpieces, Part 1: Inspection of Plain Workpieces with Indicating Measuring Instruments
IS 3455 (pdf)
IS 3455 (txt)
1971Gauging practice for plain work pieces
IS 3485 (pdf)1983Plain and Master Setting Ring Gauges (Size Range from 1 up to and Including 315 mm)
IS 3510 (pdf)
IS 3510 (txt)
1990Engineering metrology - Toolmaker's flats
IS 3512 (pdf)1966Toolmakers' Straightedges
IS 3651-1 (pdf)1982Vernier Calipers, Part I: Vernier Calipers with Least Count 0.1 mm and 0.05 mm
IS 3651-2 (pdf)
IS 3651-2 (txt)
1985Vernier Calipers, Part 2: Vernier Calipers with Least Count 0.02 mm
IS 3651-3 (pdf)
IS 3651-3 (txt)
1988Vernier Calipers, Part 3: Vernier Calipers with Least Count 0.1 mm (measuring range above 1000 mm up to and including 4000 mm)
IS 4210 (pdf)1967Strip Feeler Gauges for Electrical Purposes
IS 4211 (pdf)1993Gauges - Thread Pitch Gauges for ISO Metric Screw Threads (pitch range 0.4 to 6 mm)
IS 4213 (pdf)1991Engineering metrology - Vernier depth gauges up to 300 mm
IS 4239 (pdf)1970Mechanical Bevel Protractors
IS 4241 (pdf)1990Engineering metrology - Engineer's parallels
IS 4349 (pdf)1987Cylindrical Setting Masters
IS 4440 (pdf)
IS 4440 (txt)
1996Engineering metrology - Precision Equipment - Slip Gauge Accessories
IS 4492 (pdf)1968Welded V-blocks (Diameter Range 300 to 2 000 mm)IEC 153-1
IS 4563 (pdf)
IS 4563 (txt)
1987Block Squares
IS 4960 (pdf)
IS 4960 (txt)
1968Universal and Elongated Type V-Blocks
IS 4966-1 (pdf)
IS 4966-1 (txt)
1969Gauges for Serrations, Part 1: For Gauging External Serrations
IS 4966-2 (pdf)
IS 4966-2 (txt)
1969Gauges for Serrations, Part II: For Gauging Internal Serrations
IS 5268-1 (pdf)1991Engineering Metrology - Straightedges, Part 1: Cast Iron Staightedges (Bow Shaped or Camel Back Type and 1-section or Parallel Type)
IS 5273 (pdf)1969radius gauges
IS 5359 (pdf)1987Sine Bars
IS 5388 (pdf)1983Hexagon Handles for Plain and Threaded Plug Gauges
IS 5440 (pdf)1969Optical Flats
IS 5812 (pdf)1970Optical Bevel Protractors
IS 5939 (pdf)1970Single Angle Sine Tables
IS 5943 (pdf)1970Compound Angle Sine Tables
IS 5979 (pdf)1981Sine Centres
IS 5980 (pdf)1978Bench Centres
IS 6137 (pdf)1983Gauging Members for Plain Plug Gauges, GO and NO GO Members (Size Range from 1 up to and Including 40 mm)
IS 6150 (pdf)1971ISO Metric Screw Thread Measuring Prisms
IS 6231 (pdf)1971Prismatic Angle Gauges
IS 6232 (pdf)1971Cast Iron Box Angle Plates
IS 6244 (pdf)1980Gauging Members for Plain Plug Gauges GO and NO GO Members (Size Range Above 40 to 120 mm)
IS 6246 (pdf)1980Gauging Members for Plain Plug Gauges GO and NO GO Members (size range above 120 up to and including 250 mm)
IS 6311 (pdf)1978ISO Metric Screw Thread Measuring Cylinders
IS 6952 (pdf)1990Engineering metrology - Cylindrical squares
IS 6973 (pdf)1973Precision Angle Plates
IS 6985 (pdf)1973Precision Box Angle Plates
IS 6987 (pdf)
IS 6987 (txt)
1973Steel Precision Polygons
IS 7014 (pdf)1973Length Bars
IS 7018-1 (pdf)1983Technical supply conditions for gauges, Part 1: General
IS 7018-2 (pdf)1983Technical supply conditions for gauges, Part 2: Assembly and identification of plain plug gauges (size range from 1 mm up to and including 250 mm)
IS 7018-3 (pdf)1983Technical supply conditions for gauges, Part 3: Assembly and identification of screw plug gauges for ISO metric screw threads (size range from M1 up to and including M200)
IS 7327 (pdf)
IS 7327 (txt)
2003Engineering Metrology - Measuring Equipment - Granite Surface PlatesISO 8512-2
IS 7599-1 (pdf)1975General requirements for engineer's comparators with stands, Part I: engineer's comparators
IS 7599-2 (pdf)1975General Requirements for Engineer's Comparators With Stand, Part II: Comparator Standard
IS 7604 (pdf)1975Length Bar Accessories
IS 7606 (pdf)
IS 7606 (txt)
1982Plain Adjustable Snap Gauges
IS 7859 (pdf)
IS 7859 (txt)
1975Gauge Allowances and Manufacturing Tolerances for Plain Gauges for Inside Measurements for ISO Fit Sizes (nominal size up to 500 mm)
IS 7876 (pdf)
IS 7876 (txt)
1975Gauge allowances and manufacturing tolerances for plain gauges for outside measurements for ISO fit sizes (nominal size up to 500 mm)
IS 8023 (pdf)1991Gauges - Single ended progressive type plate snap gauges (up to 160 mm)
IS 8378 (pdf)1987Vocabulary for basic and general terms in dimensional metrology
IS 8823 (pdf)1978Triangular Straightedges
IS 8999 (pdf)
IS 8999 (txt)
2003Pipe Threads where Pressure-Tight Joints are Made on the Threads - Verification by Means of Limit GaugesISO 7-2
IS 9475 (pdf)1986Plug and Ring Gauges for Self Release 7/24 Tapers
IS 9483 (pdf)
IS 9483 (txt)
1993Measuring instruments - Micrometer heads
IS 9529 (pdf)1980Taper Plug Gauges and Taper Ring Gauges to Check Taper Bore of Gauge Handles and Taper Shanks of Gauging Members
IS 9608 (pdf)1985Specification For Gauging Members for GO and NO GO Screw Plug Gauges and Screw Check Plug Gauges for ISO Metric Screw Threads (Size Range Above M40 up to and Including M120)
IS 9610 (pdf)1985GO and NO GO Screw Ring Gauges for ISO Metric Screw Threads (Size Range From M1 up to and Including M100)
IS 9631 (pdf)1983Gauging Members for GO and NO GO Screw Plug Gauges and Screw Check Plug Gauges for ISO Metric Screw Threads (Size Range from M1 Up to and Including M40)
IS 10216 (pdf)
IS 10216 (txt)
1988Pipe Threads Where Pressure-Tight Joints are not Made on the Threads - Verification by Means of Limit GaugesISO 228-2
IS 10275 (pdf)
IS 10275 (txt)
1982Methods for assessment of circularity error from polar graphs obtained by using stylus type form measuring instrument
IS 10649 (pdf)1983Ring Gauges for Drill Chuck Taper Arbors of Morse Taper and Jacob Taper Type
IS 10685 (pdf)1983Gauging Members for Go and no Go Screw Plug Gauges and Screw Check Plug Gauges for ISO Metric Screw Threads (Size Range Above M120 up to and Including M200)
IS 11103 (pdf)1984Cylindrical Measuring Pins (Size Range from 0.1 mm up to and Including 20 mm)
IS 11498 (pdf)
IS 11498 (txt)
1985Lever Type Dial Gauges
IS 12257-1 (pdf)1987Pneumatic Length Measurement Comparators, Part 1: General Information on Principles and Methods
IS 12257-2 (pdf)
IS 12257-2 (txt)
1992Pneumatic measurement, Part 2: Design features of instruments working in high pressure range
IS 12257-3 (pdf)
IS 12257-3 (txt)
1992Pneumatic measurement, Part 3: Parameters of instruments working on high pressure
IS 12257-4 (pdf)
IS 12257-4 (txt)
1992Pneumatic measurement, Part 4: General information and examples of application
IS 12257-5 (pdf)
IS 12257-5 (txt)
1996Pneumatic measurement, Part 5: Glossary of terms and definitions
IS 12937 (pdf)1990Engineering metrology - Methods of testing straightness, flatness and perpendicularity
IS 13907 (pdf)
IS 13907 (txt)
1994Height setting micrometers and rising blocksISO 7863
IS 14271 (pdf)
IS 14271 (txt)
1995Engineering metrology - Dial snap gauges
IS 15025 (pdf)
IS 15025 (txt)
2001Technical Product Documentation - Requirements for Computer - Aided Design and Drafting - VocabularyISO/TR 10623
IS 15261 (pdf)
IS 15261 (txt)
2002Geometrical Product Specifications (GPS) - Surface Texture : Profile Method - Nominal Characteristics of Contact (Stylus) InstrumentsISO 3274
IS 15262 (pdf)
IS 15262 (txt)
2002Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Terms, Definitions and Surface Texture ParametersISO 4287
IS 15263 (pdf)
IS 15263 (txt)
2002Geometrical Product Specifications (GPS) - Surface Texture : Profile Method - Rules and Procedures for the Assessment of Surface TextureISO 4288
IS 15264 (pdf)
IS 15264 (txt)
2002Geometrical Product Specification (GPS) - Surface Imperfections - Terms, Definitions and ParametersISO 8785
IS 15371-1 (pdf)
IS 15371-1 (txt)
2003Geometrical Product Specification (GPS) Inspection by Measurement of Workpieces and Measuring Equipment, Part 1: Decision Rules for Providing Conformance or Non-Conformance with SpecificationsISO 14253-1
IS 15371-2 (pdf)
IS 15371-2 (txt)
2007Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment, Part 2: Guide to the estimation of uncertainty in GPS measurmennt, in calibration of measuring equipmennt and in product verificationTS 14253-2
IS 15371-3 (pdf)
IS 15371-3 (txt)
2007Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment, Part 3: Guidelines for a achieving agreements on measuremennt uncertainty statementsTS 14253-3
IS 15372 (pdf)
IS 15372 (txt)
2003Measurement of Roundness - Terms, Definitions and Parameters of RoundnessISO 6318
IS 15373 (pdf)
IS 15373 (txt)
2003Method for the Assessment of Departure From Roundness - Measurement of Variations in RadiusISO 4291
IS 15374 (pdf)
IS 15374 (txt)
2003Methods for the Assessment of Departure from Roundness - Measurement by Two- and Three-Point MethodsISO 4292
IS 15375 (pdf)
IS 15375 (txt)
2003Geometrical Product Specifications (GPS) - Surface Texture : Profile Method - Metrological Characteristics of Phase Correct FiltersISO 11562
IS 15393-1 (pdf)
IS 15393-1 (txt)
2003Accuracy ( Trueness and Precision ) of Measurement Methods and Results, Part 1: General Principles and DefinitionsISO 5725-1
IS 15393-2 (pdf)
IS 15393-2 (txt)
2003Accuracy ( Trueness and Precision ) of Measurement Methods and Results, Part 2: Basic Method for the Determination of Repeatability and Reproducibility of a Standard Measurement MethodISO 5725-2
IS 15393-3 (pdf)
IS 15393-3 (txt)
2003Accuracy (Trueness and Precision) of Measurement Methods and Results, Part 3: Intermediate Measures of the Precision of a Standard Measurement MethodISO 5725-3
IS 15393-4 (pdf)
IS 15393-4 (txt)
2003Accuracy (Trueness and Precision) of Measurement Methods and Results, Part 4: Basic Methods for the Determination of the Trueness of a Standard Measurement MethodISO 5725-4
IS 15393-5 (pdf)
IS 15393-5 (txt)
2003Accuracy (Trueness and Precision) of Measurement Methods and Results, Part 5: Alternative Methods for the Determination of the Precision of a Standard Measurement MethodISO 5725-5
IS 15393-6 (pdf)
IS 15393-6 (txt)
2003Accuracy (Trueness and Precision) of Measurement Methods and Results, Part 6: Use in Practice of Accuracy ValuesISO 5725-6
IS 15421-1 (pdf)
IS 15421-1 (txt)
2003Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Surfaces Having Stratified Functional Properties, Part 1: Filtering and General Measurement ConditionsISO 13565-1
IS 15421-2 (pdf)
IS 15421-2 (txt)
2003Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Surfaces Having Stratified Functional Properties, Part 2: Height Characterization Using the Linear Material Ratio CurveISO 13565-2
IS 15421-3 (pdf)
IS 15421-3 (txt)
2003Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Surfaces Having Stratified Functional Properties, Part 3: Height Characterization Using the Material Probability CurveISO 13565-3
IS 15422 (pdf)
IS 15422 (txt)
2003Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Motif ParametersISO 12085
IS 15423-1 (pdf)
IS 15423-1 (txt)
2003Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Measurement Standards, Part 1: Material MeasuresISO 5436-1
IS 15423-2 (pdf)
IS 15423-2 (txt)
2003Geometrical Product Specifications (GPS) - Surface Texture : Profile Method; Measurement Standards, Part 2: Software Measurement StandardsISO 5436-2
IS 15635-1 (pdf)
IS 15635-1 (txt)
2006Geometrical products specification (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) : Part 1 VocabularyISO 10360 -1
IS 15635-2 (pdf)
IS 15635-2 (txt)
2006Geometrical product specifications (GPS ) - Acceptance and reverification tests for coordinate measuring machines (CMM) : Part 2 CMMs Used for measuring sizeISO 10360-2
IS 15635-3 (pdf)
IS 15635-3 (txt)
2006Geometrical product specifications (GPS ) - Acceptance and reverification tests for coordinate measuring machines (CMM) : Part 3 CMMs with the axis of a rotary table as the fourth axisISO 10360-3
IS 15635-4 (pdf)
IS 15635-4 (txt)
2006Geometrical product specifications (GPS ) - Acceptance and reverification tests for coordinate measuring machines (CMM) : Part 4 CMMs used in scanning measuring modeISO 10360-4
IS 15635-5 (pdf)
IS 15635-5 (txt)
2006Geometrical Products specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) : Part 5 CMMs using multiple - stylus probing systemsISO 10360-5
IS 15635-6 (pdf)
IS 15635-6 (txt)
2006Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) : Part 6 Estimation of errors in computing gaussian associated featuresISO 10360-6
IS 15759 (pdf)
IS 15759 (txt)
2007Geometrical product specifications (GPS) - Surface texture : Profile Method - Calibration of contact (stylus) instrumentsISO 12179
IS/ISO 10360-2 (pdf)
IS/ISO 10360-2 (txt)
1994Coordinate Metrology, Part 2: Performance Assessment of Coordinate Measuring MachinesISO 10360-2:1994
SP 19 (pdf)1980Guidelines for Classification of Quality of Scraped Surfaces

Last Updated: September 6, 2013