Divisional Index ↑

Public Safety Standards of the Republic of India

Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.

Division Name: Production and General Engineering
Section Name: Drawings (PGD 24)

StandardYearTitleIBR
IS 7840 (pdf)1983Technical drawings for glasswareISO 6414
IS 8000-1 (pdf)
IS 8000-1 (txt)
1985Geometrical tolerancing on Technical Drawings, Part 1: Tolerances of form orientation, location and Run-out and appropriate geometrical definitionsISO 1101
IS 8000-2 (pdf)
IS 8000-2 (txt)
1992Technical drawings - Geometrical tolerancing, Part 2: Maximum material principlesISO 2692
IS 8000-3 (pdf)1992Technical drawings - Geometrical tolerancing, Part 3: Dimensioning and tolerancing of profilesISO 1660
IS 8000-4 (pdf)1976Geometrical tolerancing on technical drawings, Part IV: Practical examples of indications on drawings
IS 8930-1 (pdf)
IS 8930-1 (txt)
1995Technical product documentation -vocabulary, Part 1: Terms relating to technical drawings: General and types of drawingsISO 10209-1
IS 8930-2 (pdf)
IS 8930-2 (txt)
2001Technical Product Documentation - Vocabulary, Part 2: Terms Relating to Projection MethodsISO 10209-2
IS 8930-4 (pdf)
IS 8930-4 (txt)
2006Technical product documentation - Vocabulary, Part 4: Terms relating to construction documentationISO 10209-4
IS 8976 (pdf)
IS 8976 (txt)
1978Guide for preparation and arrangement of sets of drawings and parts lists
IS 9609-0 (pdf)
IS 9609-0 (txt)
2001Technical Product Documentation - Lettering, Part 0: General RequirementsIEC 706-2
IS 9609-1 (pdf)2006Technical product documentation - lettering, Part 1: Latin alphabet, numerals and marks
IS 9609-2 (pdf)2006Technical product documentation - Lettering, Part 2: GreekIEC 706-3
IS 9609-3 (pdf)2006Technical product documentation - Lettering, Part 3: Diacritical and particular marks for the latin AlphabetIEC 706-2
IS 9609-4 (pdf)2006Technical product documentation - Lettering, Part 4: Cyrillic alphabetIEC 706-2
IS 9609-5 (pdf)1998Lettering on technical drawing - Part : Amplified Devanagri lettersIEC 706-2
IS 9609-6 (pdf)
IS 9609-6 (txt)
2001Technical Product Documentation - Lettering, Part 6: Cad Lettering of the Latin Alphabet, Numerals and MarksIEC 706-2
IS 10164 (pdf)
IS 10164 (txt)
1985Requirements to execute technical drawings for microcopyingISO 6428
IS 10711 (pdf)
IS 10711 (txt)
2001Technical Product Documentation - Sizes and Layout of Drawing SheetsISO 5457
IS 10712 (pdf)1983Presentation of item references on technical drawingsISO 6433
IS 10713 (pdf)1983Scales for use in technical drawingsISO 5455
IS 10714-1 (pdf)
IS 10714-1 (txt)
2006Technical drawings - General Principles of Presentation, Part 1: Introduction and IndexISO 128-1
IS 10714-20 (pdf)
IS 10714-20 (txt)
2001Technical Drawings - General Principles of Presentation, Part 20: Basic Conventions for LinesISO 128-20
IS 10714-21 (pdf)
IS 10714-21 (txt)
2001Technical Drawings - General Principles of Presentation, Part 21: Preparation of Lines by Cad SystemsISO 128-21
IS 10714-22 (pdf)
IS 10714-22 (txt)
2006Technical Drawings - General Principles of Presentation, Part 22: Basic Conventions and Applications for Leader Lines and Reference Lines
IS 10714-23 (pdf)
IS 10714-23 (txt)
2006Technical drawings - General principles of presentation : 23 Lines on construction drawingsISO 128-23
IS 10714-25 (pdf)
IS 10714-25 (txt)
2006Technical Drawings - General Principles of Presentation, Part 25: Lines on shipbuilding drawingsISO 128-25
IS 10714-30 (pdf)
IS 10714-30 (txt)
2006Technical drawings - General principles of presentation, Part 30: Basic conventions for viewsISO 128-30
IS 10714-34 (pdf)
IS 10714-34 (txt)
2006Technical Drawings - General Principles of Presentation : 34 Views on mechanical engineering drawingsISO 128-34
IS 10714-40 (pdf)
IS 10714-40 (txt)
2006Technical drawings - General Principles of Presentation, Part 40: Basic Conventions for cuts and sectionsISO 128-40
IS 10714-44 (pdf)
IS 10714-44 (txt)
2006Technical Drawings - General Principles of Presentation, Part 44: Sections on mechanical engineering drawingsISO 128-44
IS 10715-1 (pdf)
IS 10715-1 (txt)
1999Technical Drawings - Screw Threads and Threaded Parts, Part 1: General ConventionsISO 6410-1
IS 10715-2 (pdf)1999Technical Drawings - Screw Threads and Threaded Parts, Part 2: Screw Thread InsertsISO 6410-2
IS 10715-3 (pdf)1999Technical Drawings - Screw Threads and Threaded Parts, Part 3: Simplified RepresentationISO 6410-3
IS 10715 (pdf)1983Presentation of threaded parts on technical drawingsISO 6410
IS 10716-1 (pdf)
IS 10716-1 (txt)
1999Technical Product Documentation - Springs, Part 1: Simplified RepresentationISO 2162-1
IS 10716-2 (pdf)
IS 10716-2 (txt)
1999Technical Product Documentation - Springs, Part 2: Presentation of Data for Cylindrical Helical Compression SpringsISO 2162-2
IS 10716-3 (pdf)
IS 10716-3 (txt)
1999Technical Product Documentation - Springs, Part 3: VocabularyISO 2162-3
IS 10716 (pdf)1983Rules for representation of springs on technical drawingsISO 2162
IS 10717 (pdf)1983Conventional representation of gears on technical drawingsISO 2203
IS 10718 (pdf)
IS 10718 (txt)
1993Technical drawings - Dimensions and tolerancing of conesISO 3040
IS 10719 (pdf)
IS 10719 (txt)
1983Method of indicating surface texture on technical drawingsISO 1302
IS 10720 (pdf)
IS 10720 (txt)
1999Technical Drawings - Simplified Representation of Bars and Profile SectionsISO 5261
IS 10721 (pdf)
IS 10721 (txt)
1983Datum and datum systems for geometrical tolerancing on technical drawingsISO 5459
IS 10722-1 (pdf)1983Graphical Symbols for Elements of Kinematic Diagrams - Part 1ISO 3952-1
IS 10722-2 (pdf)1983Graphical symbols for elements of kinematic diagrams Part 2ISO 3952-2
IS 10722-3 (pdf)1983Graphical symbols for kinematic diagrams Part 3ISO 3952-3
IS 10722-4 (pdf)1985Graphical symbols for elements of kinematic diagrams Part 4ISO 3952-4
IS 10967 (pdf)1984Guide for the preparation of varient drawings
IS 10968 (pdf)1984Drawing Practice for Simplified Presentation
IS 10990-1 (pdf)
IS 10990-1 (txt)
1991Technical drawings - Simplified representation of pipelines, Part 1: General rules and orthogonal representationISO 6412-1
IS 10990-2 (pdf)
IS 10990-2 (txt)
1992Technical drawings - Simplified representation of pipelines, Part 2: Isometric projectionsISO 6412-2
IS 10990-3 (pdf)2001Technical Drawings - Simplified Representation of Pipelines, Part 3: Terminal Features of Ventilation and Drainage SystemsISO 6412-3
IS 11154-1 (pdf)
IS 11154-1 (txt)
1994Nameplates - Dimensions, Part 1: Square and rectangular nameplates
IS 11154-2 (pdf)1994Nameplates - Dimensions, Part 2: Circular nameplates
IS 11154-3 (pdf)1994Nameplates - Dimensions, Part 3: Triangular nameplates
IS 11154-4 (pdf)
IS 11154-4 (txt)
1994Nameplates - Dimensions, Part 4: Elliptical and segmental nameplates
IS 11158 (pdf)1984Proportions and Dimensions of Symbols for Geometrical Tolerancing Used in Technical DrawingsISO 7083
IS 11663 (pdf)1986Conventional representation of common features and materials on technical drawings
IS 11664 (pdf)1986Folding of drawing prints
IS 11665 (pdf)
IS 11665 (txt)
2010TECHNICAL PRODUCT DOCUMENTATION - DATAISO 2173
IS 11666 (pdf)1985Technical drawings - Item listsISO 7573
IS 11667 (pdf)1991Technical drawing - Linear and angular tolerancing - Indication on drawingsISO 406
IS 11668 (pdf)1985Technical drawings - Simplified representation of centre holesISO 6411
IS 11669 (pdf)
IS 11669 (txt)
1986General Principles of Dimensioning on Technical DrawingsISO 129
IS 11670 (pdf)1993Technical Drawings - Abbreviations and Symbols for Use in Technical Drawings
IS 12160 (pdf)1987Technical Drawings - Fundamental Tolerancing PrincipleISO 8015
IS 12461-2 (pdf)1988Simplified presentation of technical documents, Part 2: Guide for preparation of order drawing for bought out parts
IS 13088 (pdf)
IS 13088 (txt)
1991Technical drawings - Representation of splines and serrationsISO 6413
IS 13099 (pdf)
IS 13099 (txt)
2001Geometrical Product Specifications ( GPS ) - Geometrical Tolerancing - Positional TolerancingISO 5458
IS 13637-1 (pdf)1993Technical Drawings - Rolling Bearings, Part 1: General Simplified RepresentationISO 8826-1
IS 13637-2 (pdf)
IS 13637-2 (txt)
1999Technical Drawings - Rolling Bearings, Part 2: Detailed Simplified RepresentationISO 8826-2
IS 13638-1 (pdf)1993Technical Drawings - Seals for Dynamic Application, Part 1: General Simplified RepresentationISO 9222-1
IS 13638-2 (pdf)
IS 13638-2 (txt)
1993Technical drawings - Seals for dynamic application, Part 2: Detailed simplified representationsISO 9222-2
IS 13847 (pdf)1993Technical drawings - Tolerancing of orientation and location - Projected tolerance zoneISO 10578
IS 14412 (pdf)1996Technical Drawings - Indication for revision of drawings
IS 14722 (pdf)
IS 14722 (txt)
1999Technical Drawings - Simplified Representation of Moulded, Cast and Forged PartsISO 10135
IS 15021-1 (pdf)
IS 15021-1 (txt)
2001Technical Drawings - Projection Methods, Part 1: SynopsisISO 5456-1
IS 15021-2 (pdf)
IS 15021-2 (txt)
2001Technical Drawings - Projection Methods, Part 2: Orthographic RepresentationsISO 5456-2
IS 15021-3 (pdf)
IS 15021-3 (txt)
2001Technical Drawings - Projection Methods, Part 3: Axonometric RepresentationsISO 5456-3
IS 15021-4 (pdf)
IS 15021-4 (txt)
2001Technical Drawings - Projection Methods, Part 4: General ProjectionISO 5456-4
IS 15022-1 (pdf)
IS 15022-1 (txt)
2001Design of Graphical Symbols for Use in the Technical Product Documentation of Products, Part 1: Basic RulesISO/IEC 11714-1
IS 15023-1 (pdf)
IS 15023-1 (txt)
2001Technical Drawings - Simplified Representation of the Assembly of Parts with Fasteners, Part 1: General PrinciplesISO 5845-1
IS 15023-2 (pdf)
IS 15023-2 (txt)
2001Technical Drawings - Simplified Representation of the Assembly of Parts with Fasteners - Parts 2 Rivets for Aerospace EquipmentISO 5845-2
IS 15024-1 (pdf)
IS 15024-1 (txt)
2001Technical Product Documentation - Handling of Computer-Based - Technical Information, Part 1: Security RequirementsISO 11442-1
IS 15024-2 (pdf)2001Technical Product Documentation - Handling of Computer-Based Technical Information, Part 2: Original DocumentationISO 11442-2
IS 15024-3 (pdf)
IS 15024-3 (txt)
2001Technical Product Documentation - Handling of Computer-Based - Technical Information, Part 3: Phases in the Product Design ProcessISO 11442-3
IS 15024-4 (pdf)
IS 15024-4 (txt)
2001Technical Product Documentation - Handling of Computer - Technical Information, Part 4: Document Management and Retrieval SystemsISO 11442-4
IS 15024 (pdf)
IS 15024 (txt)
2011Technical product documentation - Document managementISO 11442:2006
IS 15044 (pdf)2001Technical Drawings - Dimensioning and Tolerancing - Non-Rigid PartsISO 10579
IS 15054 (pdf)
IS 15054 (txt)
2001Technical Drawings - Geometrical Tolerancing - Tolerancing of Form. Orientation, Location and Run-Out - Verification Principles and Methods - CuidelinesISO/TR 5460
IS 15093 (pdf)
IS 15093 (txt)
2002Construction Drawings - Spaces for Drawing and for Text, and Title Blocks on Drawing SheetsISO 9431
IS 15726 (pdf)
IS 15726 (txt)
2006Technical drawings - Edges of undefined shape - Vocabulary and indicationsISO 13715
IS 15942 (pdf)
IS 15942 (txt)
2011Technical drawings - symbolic presentation and indication of adhesive, fold and pressed jointsISO 15785:2002
IS/ISO 13567-1 (pdf)
IS/ISO 13567-1 (txt)
1998Technical Product Documentation - Organization and Naming of Layers for CAD, Part 1: Overview and PrinciplesISO 13567-1:1998
IS/ISO 13567-2 (pdf)
IS/ISO 13567-2 (txt)
1998Technical Product Documentation - Organization and Naming of Layers for CAD, Part 2: Concepts, Format and Codes used in Construction DocumentationISO 13567-2
IS/ISO 13715 (pdf)
IS/ISO 13715 (txt)
1994Technical Drawings - Corners - Vocabulary and Indication on DrawingsISO 13715:1994
SP 46 (pdf)
SP 46 (txt)
2003Engineering Drawing Practice for Schools and Colleges

Last Updated: September 6, 2013