Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.
Division Name: Production and General Engineering
Section Name: Engineering Standards (PGD 20)
| Standard | Year | Title | IBR |
|---|---|---|---|
| IS 196 (pdf) IS 196 (txt) | 1966 | Atmospheric Conditions for Testing | |
| IS 196 (B) (pdf) IS 196 (B) (txt) | 1966 | Atmospheric Conditions for Testing (Revised)(BI-LINGUAL) | |
| IS 554 (pdf) IS 554 (txt) | 1999 | Pipe Threads Where Pressure-Tight Joints are Made on the Threads - Dimensions, Tolerances and Designation | ISO 7-1 |
| IS 919-1 (pdf) IS 919-1 (txt) | 1993 | ISO Systems of limits and fits, Part 1: Bases of tolerance, deviations and fits | ISO 286-1 |
| IS 919-2 (pdf) IS 919-2 (txt) | 1993 | ISO systems of limits and fits, Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts | ISO 286-2 |
| IS 2102-1 (pdf) IS 2102-1 (txt) | 1993 | General tolerances, Part 1: Tolerances for linear and angular dimensions without individual tolerance indications | ISO 2768-1-89 |
| IS 2102-2 (pdf) IS 2102-2 (txt) | 1993 | General tolerances, Part 2: Geometrical tolerances for features without individual tolerance indications | ISO 2768-2-89 |
| IS 2186 (pdf) | 1985 | ISO Metric external screw threads for interference fit applications | |
| IS 2473 (pdf) | 1975 | Dimensions for centre holes | |
| IS 2540 (pdf) | 2008 | Dimensions for threaded centre holes | |
| IS 2643 (pdf) IS 2643 (txt) | 2005 | Pipe Threads Where Pressure-Tight Joints are not Made on the Threads - Dimensions, Tolerances and Designation | |
| IS 2769 (pdf) | 1969 | Sizes for squares and square holes for general engineering purposes | |
| IS 3403 (pdf) | 1981 | Dimensions for knurls | |
| IS 3406-1 (pdf) | 1986 | Dimensions for countersinks and counterbores, Part 1: Countersinks | |
| IS 3406-2 (pdf) | 1986 | Dimensions for countersinks and counterbores, Part 2: Counterbores | |
| IS 3428 (pdf) IS 3428 (txt) | 2009 | DIMENSIONS FOR RELIEF GROOVES | |
| IS 3457 (pdf) | 2009 | RADII FOR ROUNDING FOR GENERAL ENGINEERING PURPOSES | |
| IS 3458 (pdf) IS 3458 (txt) | 2001 | Conical Tapers and Taper Angles for General Engineering Purposes | ISO 1119 |
| IS 4218-1 (pdf) IS 4218-1 (txt) | 2001 | ISO General Purpose Metric Screw Threads, Part 1: Basic and Design Profiles | ISO 68-1 |
| IS 4218-2 (pdf) IS 4218-2 (txt) | 2001 | ISO General Purpose Metric Screw Threads, Part 2: General Plan | ISO 261 |
| IS 4218-3 (pdf) IS 4218-3 (txt) | 1999 | ISO General Purpose Metric Screw Threads, Part 3: Basic Dimensions | ISO 724 |
| IS 4218-4 (pdf) IS 4218-4 (txt) | 2001 | ISO General Purpose Metric Screw Threads, Part 4: Selected Sizes for Screws, Bolts and Nuts | |
| IS 4695-1 (pdf) IS 4695-1 (txt) | 2003 | General Purpose Knuckle Threads, Part 1: Profile and Nominal Sizes | |
| IS 4695-2 (pdf) IS 4695-2 (txt) | 2003 | General Purpose Knuckle Threads, Part 2: Deviations and Tolerances | |
| IS 4696-1 (pdf) IS 4696-1 (txt) | 2004 | Dimensions for saw tooth threads, Part I: Basic and design profiles | |
| IS 4696-2 (pdf) | 2004 | Dimensions for saw tooth threads, Part II: Pitch diameter combinations | |
| IS 4696-3 (pdf) IS 4696-3 (txt) | 2004 | Dimensions for Metric Buttress Threads, Part 3: Basic Dimensions | |
| IS 4696-4 (pdf) IS 4696-4 (txt) | 2005 | Dimensions for saw tooth threads, Part IV: Tolerancing system | |
| IS 7008-1 (pdf) IS 7008-1 (txt) | 1999 | ISO Metric Trapezoidal Screw Threads, Part 1: Basic Profile and Maximum Material Profile | ISO 2901 |
| IS 7008-2 (pdf) | 1988 | ISO Metric trapezoidal screw threads, Part 2: Pitch diameter combinations | ISO 2902 |
| IS 7008-3 (pdf) IS 7008-3 (txt) | 1988 | ISO Metric trapezoidal screw threads, Part 3: Basic dimensions | ISO 2904 |
| IS 7008-4 (pdf) IS 7008-4 (txt) | 1999 | ISO Metric Trapezoidal Screw Threads, Part 4: Tolerances | ISO 2903 |
| IS 7615 (pdf) IS 7615 (txt) | 2003 | System of Cone Tolerances for Conical Workpieces from C=1:3 to 1:500 and Lengths from 6 to 630 mm | |
| IS 7684 (pdf) IS 7684 (txt) | 1975 | Limits of sizes for ISO metric trapezoidal nut threads (diameter range 8 to 100 mm) | |
| IS 7685 (pdf) | 1975 | Limits of sizes for ISO metric trapezoidal bolt threads diameter range 8 to 100 mm | |
| IS 7726 (pdf) IS 7726 (txt) | 1975 | Limits of sizes for ISO metric trapezoidal nut threads (diameter range 105 to 300 mm) | |
| IS 7727 (pdf) IS 7727 (txt) | 1975 | Limits of sizes for ISO metric trapezoidal bolt threads (diameter range 105 t0 300 mm) | |
| IS 8788 (pdf) IS 8788 (txt) | 2002 | Dimensions for Metric External Taper and Internal Parallel Screw Threads | |
| IS 8841 (pdf) IS 8841 (txt) | 1978 | Recommendations for limits and fits for sizes above 3 150 mm upto 10 000 mm | |
| IS 9965 (pdf) | 1981 | Limits of sizes for ISO metric external screw threads for high temperature applications | |
| IS 10587 (pdf) | 1983 | Terminology for screw threads | |
| IS 11698-1 (pdf) | 2004 | ISO Miniature screw threads, Part 1: Basic profile | |
| IS 11698-2 (pdf) | 2004 | ISO Miniature screw threads, Part 2: Basic dimensions for design profiles | |
| IS 11698-3 (pdf) | 2005 | ISO Miniature screw threads, Part 3: Tolerances | |
| IS 11698-4 (pdf) | 2005 | ISO Miniature screw threads, Part 4: Limits of sizes | |
| IS 12186 (pdf) IS 12186 (txt) | 1987 | Tolerances for ISO Metric trapezoidal screw threads for lead and feed screw assemblies | |
| IS 14962-1 (pdf) IS 14962-1 (txt) | 2001 | ISO General Purpose Metric Screw Threads - Tolerances, Part 1: Principle and Basic Data | ISO 965-1 |
| IS 14962-2 (pdf) IS 14962-2 (txt) | 2001 | ISO General Purpose Metric Screw Threads - Tolerances, Part 2: Limits of Sizes for General Purpose External and Internal Screw Threads - Medium Quality | ISO 965-2 |
| IS 14962-3 (pdf) IS 14962-3 (txt) | 2001 | ISO General Purpose Metric Screw Threads - Tolerances, Part 3: Deviations for Constructional Screw Threads | ISO 965-3 |
| IS 14962-4 (pdf) IS 14962-4 (txt) | 2001 | ISO General Purpose Metric Screw Threads - Tolerances, Part 4: Limits of Sizes for Hot-Dip Galvanized External Screw Threads to Mate with Internal Screw Threads Tapped with Tolerance Position H or G after Galvanizing | ISO 965-4 |
| IS 14962-5 (pdf) IS 14962-5 (txt) | 2001 | ISO General Purpose Metric Screw Threads - Tolerances, Part 5: Limits of Sizes for Internal Screw Threads to Mate with Hot-Dip Galvanized External Screw Threads with Maximum Size of Toleracnce Position h before Galvanizing | ISO 965-5 |
| SP 42 (pdf) SP 42 (txt) | 2008 | Survey of screw threads |
Last Updated: September 6, 2013
↑