Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.
Division Name: Production and General Engineering
Section Name: Fluid Power (PGD 16)
Standard | Year | Title | IBR |
---|---|---|---|
IS 5107 (pdf) | 2004 | Fluid power systems and components - Nominal pressures | ISO 2944 |
IS 5108 (pdf) | 1969 | Recommendation on nominal rates of flow for oil-hydraulic system elements | |
IS 5109 (pdf) | 1969 | Recommendation on nominal bores for oil-hydraulic system elements | |
IS 7513-2 (pdf) IS 7513-2 (txt) | 2002 | Fluid Power Systems and Components -- Graphic Symbols and Circuit Diagrams, Part 2: Circuit Diagrams | ISO 1219-2 |
IS 7513 (pdf) IS 7513 (txt) | 1974 | Graphical symbols for fluid power systems | ISO 1219 |
IS 8208 (pdf) | 2004 | Fluid power systems and components - Cylinder bores and piston rod diameters - Metric series | ISO 3320 |
IS 8383 (pdf) IS 8383 (txt) | 2000 | Hydraulic Fluid Power - Filter Elements - Verification of Fabrication Integrity and Determination of the First Bubble Point | ISO 2942 |
IS 8384 (pdf) IS 8384 (txt) | 1977 | Method of test for collapse/burst resistance of oil hydraulic filter elements | ISO 2941 |
IS 8384 (pdf) IS 8384 (txt) | 2013 | Hydraulic Fluid Power--Filter Elements--Verification of Collapse/Burse Pressure Rating | ISO 2941:2009 |
IS 8385 (pdf) IS 8385 (txt) | 2005 | Hydraulic Fluid Power - Filter elements - Verification of material compatibility with fluids | ISO 2943 |
IS 8386 (pdf) | 1977 | Method of test for end-load rating of oil hydraulic filter elements | ISO 3723 |
IS 8526 (pdf) | 1994 | Sizes for bores and port threads for pneumatic power cylinders - Recommendations | ISO 7180 |
IS 8532 (pdf) IS 8532 (txt) | 2000 | Flow Fatigue Characteristics of Oil Hydraulic Filter Elements - Method of Test | ISO 3724 |
IS 9269 (pdf) IS 9269 (txt) | 1990 | Evaluation of pressure drop versus flow characteristics of hydraulic filter elements and filters - Method of test | ISO 3968 |
IS 10069 (pdf) IS 10069 (txt) | 1992 | Hydraulic fluid power - Positive displacement pumps, motors and integral transmissions - Determination of steady-state performance | ISO 4409 |
IS 10129 (pdf) IS 10129 (txt) | 2004 | Hydraulic Fluid Power - Dimensions and identification code mounting flanges and shaft ends of displacement pumps and motors | ISO 3019-2 |
IS 10143 (pdf) IS 10143 (txt) | 1995 | Pneumatic fluid power-single rod cylinders, 1000 kPa (10 bar) series, with detachable mountings, bores from 32 mm to 250 mm - Mounting dimensions | ISO 6431 |
IS 10187 (pdf) IS 10187 (txt) | 2002 | Hydraulic Fluid Power - Four-Port Directional Control Valves - Mounting Surfaces | ISO 4401 |
IS 10187 (pdf) IS 10187 (txt) | 2013 | Hydraulic Fluid Power - Four-Port Directional Control Valves - Mounting Surfaces | ISO 4401:2005 |
IS 10411 (pdf) | 1983 | Recommendations on nominal strokes for fluid power cylinder | ISO 4393 |
IS 10416 (pdf) IS 10416 (txt) | 1992 | Fluid Power Systems and Components - Vocabulary | ISO 5598 |
IS 10481 (pdf) IS 10481 (txt) | 2002 | Hydraulic Fluid Power - General Rules Relating to Systems | ISO 4413 |
IS 10585 (pdf) IS 10585 (txt) | 2002 | Method of Test for Cylinders for Oil Hydraulic Systems | |
IS 10983 (pdf) IS 10983 (txt) | 1994 | Fluid power - cylinders - Housing for piston and rod seals in reciprocating applications - Dimensions and tolerances - Recommendations | ISO 5597 |
IS 11003-1 (pdf) IS 11003-1 (txt) | 2005 | Hydraulic Fluid Power - Mounting dimensions for single Rod Cylinders 160 Mpa (160 bar) : Part 1 Medium Series | ISO 6020-1 |
IS 11003-2 (pdf) IS 11003-2 (txt) | 2000 | Hydraulic Fluid Power - Mounting Dimensions for Single Rod Cylinders - 16 MPa (160 bar) Series, Part 2: Compact Series | ISO 6020-2 |
IS 11146 (pdf) | 1999 | Hydraulic Fluid Power - Cylinders - Bore and Rod Area Ratios | ISO 7181 |
IS 11147 (pdf) IS 11147 (txt) | 1984 | Recommendations for parameter definitions and letter symbols for hydraulic fluid power pumps, motors and integral transmissions | ISO 4391 |
IS 11245 (pdf) | 1999 | Purchase specification for pneumatic cylinder | |
IS 11277 (pdf) IS 11277 (txt) | 2004 | Hydraulic fluid power - Gas-loaded accumulators with separator - Ranges of pressures and volumes and characteristic qualities | ISO 5596 |
IS 11337 (pdf) | 2002 | Purchase Hydraulic Cylinders | |
IS 11559 (pdf) IS 11559 (txt) | 1995 | Hydraulic fluid power - Cylinders - Rod end spherical eyes - Mounting Dimensions | ISO 6982 |
IS 11560 (pdf) | 1995 | Hydraulic fluid power - Cylinders - Rod end plain eyes - Mounting Dimensions | ISO 6981 |
IS 11845-1 (pdf) IS 11845-1 (txt) | 1994 | Fluid logic circuits for fluid power systems, Part 1: symbols for binary logic and related functions | ISO 5784-1 |
IS 11845-2 (pdf) IS 11845-2 (txt) | 1995 | Fluid logic circuits for fluid power systems, Part 2: Symbols for supply and exhausts as related to logic symbols | ISO 5784-2 |
IS 11845-3 (pdf) IS 11845-3 (txt) | 1994 | Fluid logic circuits for fluid power systems, Part 3: Symbols for logic sequences and related functions | ISO 5784-3 |
IS 12484 (pdf) IS 12484 (txt) | 1999 | Cup Seal for Fluid Power Applications | |
IS 12485 (pdf) | 1988 | Metal Bonded Seals | |
IS 12498 (pdf) | 1988 | Method of test for evaluation of performance of air pressure regulators | |
IS 12593 (pdf) IS 12593 (txt) | 2000 | Hydraulic Fluid Power - Single Rod Cylinders, 16 MPa (160 bar) Compact Series - Tolerances | ISO 8131 |
IS 12597 (pdf) | 1988 | Recommendation on units for fluid power system | |
IS 12723 (pdf) IS 12723 (txt) | 1988 | Pneumatic fluid power - Single rod cylinder - 1000 kPa (10 bar) series - Bores from 8 mm ro 25 mm - Mounting dimensions | ISO 6432 |
IS 12725 (pdf) IS 12725 (txt) | 2002 | Pneumatic Fluid Power - General Rules Relating to Systems | ISO 4414 |
IS 12738 (pdf) IS 12738 (txt) | 1995 | Pneumatic fluid power - Single rod cylinders, 1000 kPa (10 bar) series, with integral mountings, bores from 32 mm to 250 mm - Mounting dimension | ISO 6430 |
IS 13053 (pdf) IS 13053 (txt) | 1991 | Hydraulic fluid power system - Commissioning and maintenance of complete hydraulic systems - Recommendations | |
IS 13085 (pdf) | 1991 | Hydraulic fluid power - Single rod cylinders, 160 bar (16 MPa) - Medium series - Port dimensions | ISO 8136 |
IS 13086 (pdf) | 1999 | Pneumatic Fluid Power - Cylinders, 1 000 kPa (10 bar) Series - Rod End Spherical Eyes - Mounting Dimensions | ISO 8139 |
IS 13087 (pdf) IS 13087 (txt) | 1999 | Pneumatic Fluid Power - Cylinders, 1 000 kPa (10 bar) Series - Rod End Clevis - Mounting Dimensions | ISO 8140 |
IS 13102 (pdf) | 1991 | Hydraulic fluid power - Single rod cylinders, 250 bar (25 MPa) series - Port dimensions | ISO 8137 |
IS 13103 (pdf) IS 13103 (txt) | 2005 | Hydraulic fluid power - Single rod cylinders, 160 bar (16 MPa) compact series - Port dimensions | ISO 8138 |
IS 13251 (pdf) IS 13251 (txt) | 1992 | Hydraulic Fluid Power - Single Rod Cylinders, 160 Bar (16 MPa) Medium and 250 Bar (25 MPa) Series - Mounting Dimensions for Accessories | ISO 8132 |
IS 13434 (pdf) IS 13434 (txt) | 2005 | Hydraulic fluid power - Single rod cylinders, 160 bar (16 MPa) medium and 250 bar (25 MPa) series - Tolerances | ISO 8135 |
IS 13533 (pdf) | 1992 | Fluid power cylinders - Piston rod thread dimensions and types | ISO 4395 |
IS 13534 (pdf) IS 13534 (txt) | 1992 | Hydraulic fluid power - Valves - Determination of pressure differential /flow characteristics | ISO 4411 |
IS 13535 (pdf) IS 13535 (txt) | 2005 | Hydraulic fluid power - Filters - Multi-pass method for evaluating filtration performance | ISO 4572 |
IS 13542 (pdf) IS 13542 (txt) | 1992 | Hydraulic fluid power - contamination analysis - method of reporting analysis data | |
IS 13569 (pdf) IS 13569 (txt) | 1993 | Hydraulic fluid power - Fluid sample containers - Qualifying and controlling cleaning methods | ISO 3722 |
IS 13570 (pdf) IS 13570 (txt) | 2000 | Hydraulic Fluid Power - Particulate Contamination Analysis - Extraction of Fluid Samples from Lines of an Operating System | ISO 4021 |
IS 13571 (pdf) IS 13571 (txt) | 1992 | Hydraulic fluid power - Calibration of automatic count instruments for particles suspended in liquids - Method using classified AC fine dust contaminant | ISO 4402 |
IS 13617 (pdf) | 1992 | Evaluation of pressure drop versus flow characteristics of pneumatic filters - Method of test | |
IS 13876-1 (pdf) | 1993 | Guide for marking system for fluid power components, Part 1: Cylinders | |
IS 13876-2 (pdf) | 1993 | Guide for marking system for fluid power components, Part 2: Valves | |
IS 13876-3 (pdf) | 1993 | Guide for marking systems for fluid power components, Part 3: Pumps and motors | |
IS 14148 (pdf) IS 14148 (txt) | 2005 | Hydraulic fluid power - Pressure control valves (excluding pressure relief valves), sequence valves , unloading valves, throttle valves and check valves- Mounting surfaces | ISO 5781 |
IS 14150 (pdf) IS 14150 (txt) | 2005 | Hydraulic fluid power - Pressure relief valves - Mounting surfaces | ISO 6264 |
IS 14167 (pdf) | 1994 | Pneumatic Cylinders - Acceptance Test | |
IS 14235 (pdf) | 1995 | Wiper Seals Used for Fluid Power Application | |
IS 14236 (pdf) IS 14236 (txt) | 1995 | Seals for reciprocating applications used in fluid power systems - Methods of test | |
IS 14237 (pdf) | 1995 | U-type Seals with Asymmetrical and Symmetrical Lips Used for Fluid Power Application | |
IS 14601 (pdf) | 1998 | Method for presenting performance data for hydraulic pumps | |
IS 14602 (pdf) IS 14602 (txt) | 1999 | Installation methods of positive displacement hydraulic pumps and motors - Guidelines | |
IS 14604 (pdf) | 1998 | Proforma for purchase specification for positive displacement pumps and motors used in oil hydraulic systems | |
IS 14645 (pdf) | 1998 | Fluid Power Systems and Comonents - Cylinders - Nominal Pressure | |
IS 14740 (pdf) IS 14740 (txt) | 1999 | Pneumatic Fluid Power - Components Using Compressible Fluids - Determination of Flow-rate Characteristics | ISO 6358 |
IS 14848 (pdf) | 2000 | Hydraulic Fluid Power - Pumps and Motors - Geometric Displacements | ISO 3662 |
IS 14849-1 (pdf) IS 14849-1 (txt) | 2000 | Hydraulic Fluid Power - Determination of Characteristics of Motors, Part 1: At Constant Low Speed and at Constant Pressure | ISO 4392-1 |
IS 14849-2 (pdf) IS 14849-2 (txt) | 2000 | Hydraulic Fluid Power - Determination of Characteristics of Motors, Part 2: Startability | ISO 4392-2 |
IS 14849-3 (pdf) IS 14849-3 (txt) | 2005 | Hydraulic Fluid Power - Determination of Characteristics of Motors, Part 3: At Constant flow and at constant torque | ISO 4392-3 |
IS 14875 (pdf) IS 14875 (txt) | 2000 | Compressed Air Filters - Evaluation Parameters | |
IS 14876 (pdf) IS 14876 (txt) | 2000 | Compressed Air Lubricators - Evaluation Parameters | |
IS 15045-1 (pdf) IS 15045-1 (txt) | 2001 | Pneumatic Fluid Power - Five Port Directional Control Valves, Part 1: Mounting Interface Surfaces Without Electrical Connector | ISO 5599-1 |
IS 15045-2 (pdf) IS 15045-2 (txt) | 2001 | Pneumtrice Fluid Power - Five Port Directional Control Valves, Part 2: Mounting Interface Surface with Optical Electrical Connector | ISO 5599-2 |
IS 15045-3 (pdf) IS 15045-3 (txt) | 2001 | Pneumatic Fluid Power - Five Port Directional Control Valves, Part 3: Code System for Communication of Valve Functions | ISO 5599-3 |
IS 15168 (pdf) IS 15168 (txt) | 2002 | Fluid Power Systems and Components - Cylinders - Identification Code for Mounting Dimensions and Mounting Types | ISO 6099 |
IS 15170 (pdf) IS 15170 (txt) | 2002 | Hydraulic Fluid Power -- Methods for Cleaning and for Assessing the Cleanliness Level of Components | ISO/TR 10949 |
IS 15178 (pdf) IS 15178 (txt) | 2002 | Hydraulic Fluid Power - Fire-Resistant (FR) Fluids - Guidelines For Use | ISO 7745 |
IS 15179 (pdf) IS 15179 (txt) | 2002 | Hydraulic Fluid Power -- Compatibility Between Elastomeric Metarial and Fluids | ISO 6072 |
IS 15181-1 (pdf) IS 15181-1 (txt) | 2002 | Hydraulic Fluid Power - Measurement Techniques, Part 1: General Measurement Principles | ISO 9110-1 |
IS 15181-2 (pdf) IS 15181-2 (txt) | 2002 | Hydraulic Fluid Power -- Measurement Techniques, Part 2: Measurements of Average Steady-State Pressure in Closed Conduit | ISO 9110-2 |
IS 15331 (pdf) IS 15331 (txt) | 2003 | Pneumatic Fluid Power - Identification of Ports and Control Mechanisms of Control Valves and Other Components | ISO 11727 |
IS 15332 (pdf) IS 15332 (txt) | 2003 | Pneumatic Cylinders for Mechanized Multiple Spot Welding | ISO 7285 |
IS 15432 (pdf) IS 15432 (txt) | 2003 | Hydraulic Fluid Power - Sealing Devices - Standard Test Methods to Assess the Performance of Seals Used in Oil Hydraulic Reciprocating Applications | ISO 7986 |
IS/ISO 3939 (pdf) IS/ISO 3939 (txt) | 1977 | Fluid Power Systems and Components - Multiple Lip Packing Sets - Methods for Measuring Stack Heights | ISO 3939:1977 |
IS/ISO 4412-1 (pdf) IS/ISO 4412-1 (txt) | 1991 | Hydraulic Fluid Power - Test Code for Determination of Airborne Noise Levels, Part 1: Pumps | ISO 4412-1:1991 |
IS/ISO 4412-2 (pdf) IS/ISO 4412-2 (txt) | 1991 | Hydraulic Fluid Power - Test Code for Determination of Airborne Noise Levels, Part 2: Motors | ISO 4412-2:1991 |
IS/ISO 4412-3 (pdf) IS/ISO 4412-3 (txt) | 1991 | Hydraulic fluid power - test code for determination of airborne noise levels | ISO 4412-3:1991 |
IS/ISO 6547 (pdf) IS/ISO 6547 (txt) | 1981 | Hydraulic Fluid Power - Cylinders - Piston Seal Housings Incorporating Bearing Rings - Dimensions and Tolerances | ISO 6547:1981 |
IS/ISO 7425-1 (pdf) IS/ISO 7425-1 (txt) | 1988 | Hydraulic Fluid Power - Housings for Elastomer-Energized, Plastic-Faced Seals - Dimensions and Tolerances, Part 1: Piston Seal Housings | ISO 7425-1:1988 |
IS/ISO 7425-2 (pdf) IS/ISO 7425-2 (txt) | 1989 | Hydraulic Fluid Power - Housings for Elastomer-Energized, Plastic-Faced Seals - Dimensions and Tolerances, Part 2: Rod Seal Housings | ISO 7425-2:1989 |
Last Updated: October 9, 2013
↑