Divisional Index ↑

Public Safety Standards of the Republic of India

Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.

Division Name: Production and General Engineering
Section Name: Bearing (PGD 13)

StandardYearTitleIBR
IS 2398 (pdf)1967Identification Code for Rolling Bearings
IS 2399 (pdf)
IS 2399 (txt)
2002Rolling bearings - VocabularyISO 5593-1984
IS 2898 (pdf)1976Steel Balls for Rolling Bearings
IS 3090 (pdf)
IS 3090 (txt)
1965Code of practice for installation and maintenance of rolling bearings
IS 3823 (pdf)
IS 3823 (txt)
1988Rolling bearings - Static load ratingsISO 76
IS 3824-1 (pdf)
IS 3824-1 (txt)
1983Method of Evaluating Dynamic Load Ratings of Rolling Berrings, Part 1: Radial Ball BearingsISO 281
IS 3824-2 (pdf)
IS 3824-2 (txt)
1983Method of Evaluating Dynamic Load Ratings of Rolling Berrings, Part 2: Radial Roller BearingsISO 281
IS 3824-3 (pdf)
IS 3824-3 (txt)
1983Method of Evaluating Dynamic Load Ratings of Rolling Berrings, Part 3: Thrust Ball BearingsISO 281
IS 3824-4 (pdf)
IS 3824-4 (txt)
1983Method of Evaluating Dynamic Load Ratings of Rolling Berrings, Part 4: Thurst Roller BearingsISO 281
IS 3824 (pdf)2002Rolling Bearings - Dynamic Load Ratings and Rating LifeISO 281
IS 3980 (pdf)
IS 3980 (txt)
1982Porous Metal Powder Oil-Impregnated Bearings
IS 4025 (pdf)
IS 4025 (txt)
2006Rolling bearings -Gauging practice
IS 4215 (pdf)
IS 4215 (txt)
1983Ring Type Needle Bearings
IS 4216 (pdf)1981Needle Cages
IS 4217 (pdf)1981Needle Rollers
IS 4773 (pdf)2002Rolling Bearings -- Plummer Blocks Housings -- Boundary Dimensions
IS 5669 (pdf)
IS 5669 (txt)
1987General plan of boundary dimensions for radial rolling bearingsISO 15-1981
IS 5692 (pdf)
IS 5692 (txt)
1988Tolerances for radial rolling bearings
IS 5932 (pdf)
IS 5932 (txt)
1999Boundary Dimensions for Thrust Ball Bearings with Flat Seats
IS 5933 (pdf)
IS 5933 (txt)
2002Rolling Bearings - Thrust Bearings - TolerancesISO 199
IS 5934 (pdf)
IS 5934 (txt)
1999Rolling Bearings - Chamfer Dimensions - Maximum ValuesISO 582-1995
IS 5935 (pdf)1992Radial internal clearances in unloaded radial rolling bearings
IS 6453 (pdf)1984Technical supply conditions for rolling bearings
IS 6454 (pdf)1972Self-Aligning Roller Bearings
IS 6455 (pdf)1972Single Row Radial Ball Bearings
IS 6456 (pdf)1972Double Row Radial Ball Bearings
IS 6457 (pdf)1972Single Row Cylindrical Roller Bearings
IS 6458 (pdf)1972Double Row Cylindrical Roller Bearings
IS 6548 (pdf)
IS 6548 (txt)
1992Rolling bearings - Instrument precision bearingsISO 1224
IS 7460 (pdf)1988Tolerances for tapered roller bearings
IS 7461-1 (pdf)
IS 7461-1 (txt)
1993General plan of boundary dimensions for tapered roller bearings, Part 1: Single row bearings
IS 7461-2 (pdf)
IS 7461-2 (txt)
1992General plan of boundary dimensions for tapered roller bearings, Part 2: Double row bearings
IS 7461-3 (pdf)
IS 7461-3 (txt)
1992General plan of boundary dimensions for tapered roller bearings, Part 3: Flanged cups
IS 8656 (pdf)1977Tapered Adapter Sleeves for Rolling Bearings
IS 8657 (pdf)1977Tapered Withdrawal Sleeves for Rolling Bearings
IS 9202 (pdf)1979Cylindrical Rollers
IS 9619 (pdf)
IS 9619 (txt)
1980Identification code for shell type needle bearings (including sealed bearings)
IS 9764-1 (pdf)
IS 9764-1 (txt)
1992Plain bearings - Washers for plain bearings and wrapped bushes, Part 1: Ring type thrust washers
IS 9764-2 (pdf)
IS 9764-2 (txt)
1994Plain bearings - Washers for plain bearings and wrapped bushes -Specification, Part 2: Half thrust washers
IS 10203 (pdf)1982Technical supply conditions for thin walled plain bearings
IS 10260-1 (pdf)
IS 10260-1 (txt)
1982Terms, definitions and classification of plain bearings, Part I: Construction
IS 10260-2 (pdf)1982Terms, definitions and classification of plain bearings, Part II: Friction and wear
IS 10260-3 (pdf)
IS 10260-3 (txt)
1982Terms, definitions and classification of plain bearings, Part III: Lubrication
IS 10648 (pdf)
IS 10648 (txt)
1983Code for identification of ring type needle bearings (including sealed bearings)
IS 11027 (pdf)
IS 11027 (txt)
1984Definitions of tolerances for rolling bearingsISO 1132
IS 11145 (pdf)
IS 11145 (txt)
2002Plain Bearings -- Thin Walled Half-Bearings -- Checking of Peripheral LengthISO 6524
IS 11904 (pdf)
IS 11904 (txt)
1999Rolling bearings with locating Radial bearings snap ring - Dimensions and tolerancesISO 464
IS 12102 (pdf)1987Tapered Roller Bearings
IS 13405 (pdf)1999Rolling Bearings - Cylindrical Roller Bearings, Separate Thrust Collars - Boundary DimensionsISO 246
IS 13406 (pdf)1992Radial ball bearings with flanged outer ring - Flange dimensionsISO 8443
IS 13962 (pdf)
IS 13962 (txt)
1994Rolling bearings - Metric tapered roller bearings - Designation systemISO 10317
IS 14347 (pdf)
IS 14347 (txt)
1996Plummer block housing
IS 14478 (pdf)
IS 14478 (txt)
1997Plain Bearings - Thick-walled dushes, Plain and Flange Type, Full Round (Without Any Joint or Slit)
IS 14691 (pdf)1999Rolling Bearings - Taper Rolling Bearings - Tapered Roller - Metric Series
IS 14802-1 (pdf)2000Plain Bearings - Hardness Testing of Bearing Metals, Part 1: Compound MaterialsISO 4384-1
IS 14802-2 (pdf)2000Plain Bearings - Hardness Testing of Bearing Metals, Part 2: Solid MaterialsISO 4384-2
IS 14803-1 (pdf)
IS 14803-1 (txt)
2000Plain Bearings, Part 1: FitsISO 12129-1
IS 14803-2 (pdf)
IS 14803-2 (txt)
2000Plain Bearings, Part 2: Tolerances on Form and Position and Surface Roughness for Shafts, Flanges and Thrust CollarsISO 12129-2
IS 15620 (pdf)
IS 15620 (txt)
2005Plain bearings - multilayer materials for thin-walled plain bearingsISO 4383
IS 15624 (pdf)
IS 15624 (txt)
2005Thermoplastic polymers for plain bearings - classification and designationISO 6691:200
IS 15625 (pdf)
IS 15625 (txt)
2005Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types designation and their application to bearing bushesISO 12128

Last Updated: September 6, 2013