Divisional Index ↑

Public Safety Standards of the Republic of India

Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.

Division Name: Metallurgical Engineering
Section Name: Cast Iron and Spun Iron (MTD 6)

StandardYearTitleIBR
IS 210 (pdf)
IS 210 (txt)
2009Grey Iron Castings
IS 1536 (pdf)2001Centrifugally cast (spun) iron pressure pipes for water, gas and sewage
IS 1537 (pdf)1976Vertically cast iron pressure pipes for water, gas and sewage
IS 1538 (pdf)1993Cast iron fittings for pressure pipes for water, gas and sewage
IS 1729 (pdf)2002Cast Iron/Ductile Iron Drainage Pipes and Pipe Fittings for Over Ground Non-Pressure Pipeline Socket and Spigot Series
IS 1865 (pdf)
IS 1865 (txt)
1991Iron castings with spheroidal or nodular graphite
IS 1879 (pdf)
IS 1879 (txt)
2010Malleable cast iron pipe fittings _ Specification
IS 1956-7 (pdf)1976Glossary of Terms Relating to Iron and Steel, Part VII: Wrought Iron
IS 2084 (pdf)1991Code for designation of pig iron
IS 2749 (pdf)
IS 2749 (txt)
1974Austenitic iron castings
IS 3005-1 (pdf)
IS 3005-1 (txt)
1979Grey Cast Iron Ingot Moulds, Stools and Slag Ladles, Part I: Bottom Stools for Large Size Ingot Moulds Weighing 8 Tonnes and Higher
IS 3005-2 (pdf)
IS 3005-2 (txt)
1979Grey Cast Iron Ingot Moulds, Stools and Slag Ladles, Part II: Grey Cast Iron Ingot Moulds of Mass More than Eight Tonnes
IS 3005-3 (pdf)
IS 3005-3 (txt)
1982Grey Cast Iron Ingot Moulds, Stools and Slag Laddles, Part III: Grey Cast Iron Ingot Moulds of Mass More than One Tonne and up to Eight Tonnes
IS 3005-4 (pdf)
IS 3005-4 (txt)
1984Grey Cast Iron Ingot Moulds, Stools and Slag Laddles, Part 4: Grey Cast Iron Ingot Moulds of Mass up to 1 Tonne
IS 3355 (pdf)
IS 3355 (txt)
1974Grey iron castings for elevated temperatures for non-pressure containing parts
IS 3516 (pdf)1966Cast iron pipe flanges and flanged fittings for petroleum industry
IS 3896-1 (pdf)
IS 3896-1 (txt)
1978Comparison of Indian and Overseas Standards for Iron Castings, Part I: Grey Iron Castings
IS 3896-2 (pdf)
IS 3896-2 (txt)
1985Comparison of Indian and Overseas Standards for Iron Castings, Part 2: Spheroidal or Nodular Graphite Iron Castings
IS 3989 (pdf)
IS 3989 (txt)
1984Centrifugally cast (spun) iron spigot and socket soil,waste, ventilation and rainwater pipes, fittings, and accessories
IS 4771 (pdf)
IS 4771 (txt)
1985Abrasion-resistant iron castings
IS 5519 (pdf)
IS 5519 (txt)
1979Deviations for untoleranced dimensions and mass of grey iron castings
IS 5531 (pdf)
IS 5531 (txt)
1988Cast iron specials for asbestos-cement pressure pipes for water, gas and sewage
IS 5787 (pdf)1986Spheroidal or nodular graphite iron castings for paper mill dryer rolls
IS 5788 (pdf)
IS 5788 (txt)
1986Iron castings with spheroidal or nodular graphite for pressure containing parts for use at elevated temperatures
IS 5789 (pdf)
IS 5789 (txt)
1993Austenitic Spheroidal Graphite Iron Castings for Pressure Containing Parts Suitable for Low-Temperature Service
IS 6163 (pdf)1978Specification for Centrifugally Cast (Spun) Iron Low Pressure Pipes for Water, Gas and Sewaage
IS 6418 (pdf)1971Cast iron and malleable cast iron flanges for general engineering purposes
IS 6629 (pdf)
IS 6629 (txt)
1972Cast iron rolls
IS 7181 (pdf)1986Horizontally cast iron double flanged pipes for water, gas and sewage
IS 7520 (pdf)
IS 7520 (txt)
1974Corrosion resistant high silicon iron castings
IS 7925 (pdf)
IS 7925 (txt)
1976Low alloy types of abrasion resistant iron castings
IS 8329 (pdf)
IS 8329 (txt)
2000Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewage
IS 8349 (pdf)1977Deviations for untoleranced dimensions of malleable iron castings
IS 8350 (pdf)
IS 8350 (txt)
1977Deviations for untoleranced dimensions of spheroidal or nodular graphite iron castings
IS 8794 (pdf)1988Cast iron detachable joints for use with asbestos cement pressure pipes
IS 9321 (pdf)
IS 9321 (txt)
1979Material for alloy cast iron valve seat inserts
IS 9523 (pdf)
IS 9523 (txt)
2000Ductile Iron Fittings for Pressure Pipes for Water, Gas and Sewage
IS 9630 (pdf)
IS 9630 (txt)
1980Recommended practices for production of spheroidal graphite iron
IS 10292 (pdf)1988Dimensional requirements for rubber sealing rings for C.I.D. joints in asbestos cement piping
IS 10299 (pdf)
IS 10299 (txt)
1982Cast iron saddle pieces for service connection from asbestos cement pressure pipes
IS 12308-1 (pdf)1987Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 1: Determination of total carbon by thermal conductivity method (for carbon 1.00 to 4.50 percent)
IS 12308-2 (pdf)1987Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 2: Determination of sulphur by iodimetric titration after combustion (for sulphur 0.005 to 0.25 percent)
IS 12308-3 (pdf)1987Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 3: Determination of manganese by periodic spectrophotometric method (for manganese 0.1 to 2.5 percent)
IS 12308-4 (pdf)1988Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 4: Determination of Total Carbon, Graphitic Carbon and Combined Carbon by Gravimetric Method
IS 12308-5 (pdf)
IS 12308-5 (txt)
1991Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 5: Determination of phosphorus by alkalimetric method (for phosphorus 0.01 to 0.50 percent)
IS 12308-6 (pdf)1991Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 6: Determination of silicon by gravimetric method (for silicon 0.1 to 6.0 percent)
IS 12308-8 (pdf)
IS 12308-8 (txt)
1997Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 8: Determination of chromium by per sulphate oxidation method (for chromium 0.1 to 28 percent)
IS 12308-9 (pdf)
IS 12308-9 (txt)
1993Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 9: Determination of Molybdenum By Thiocyanate (Spectrometric) Method (for Molybdenum 0.01 to 1.
IS 12308-10 (pdf)1991Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 10: determination of managanese (upto 7.0 percent) by arsenite(volumetric )method
IS 12308-11 (pdf)
IS 12308-11 (txt)
1991Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 11: Determination of total carbon by the direct combustion volumetric method (for carbon 1.50 to 4.50 percent)
IS 12308-12 (pdf)
IS 12308-12 (txt)
1992Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 12: Determination of copper by atomic absorption spectrometric method (for copper 0.01 to 0.5 percent)
IS 12308-13 (pdf)
IS 12308-13 (txt)
1992Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 13: Determination of magnesium by atomic absorptin spectrometric method (for magnesium upto 0.1 percent)
IS 12308-14 (pdf)
IS 12308-14 (txt)
1993Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 14: Determination of titanium by hydrogen per oxide (spectrophotometric) method (for titanium upto 0.25 percent)
IS 12820 (pdf)2004Dimensional Requirements of Rubber Gaskets for Mechanical Joints and Push-on Joints for Use with Cast Iron Pipes and Fittings for Carrying Water, Gas and Sewage
IS 12987 (pdf)
IS 12987 (txt)
1991Cast iron detachable joints for use with asbestos cement pressure pipes (light duty)
IS 12988 (pdf)1991Rubber Sealing Rings for Cid Joints for Light Duty ac Pipes - Dimensional Requirements
IS 13382 (pdf)
IS 13382 (txt)
2004Cast Iron Specials for Mechanical and Push-on Flexible Joints for Pressure Pipe Lines for Water, Gas and SewageISO 2531
IS 13502 (pdf)
IS 13502 (txt)
1992Pig iron
IS 14329 (pdf)
IS 14329 (txt)
1995Malleable iron castings
IS 15338 (pdf)
IS 15338 (txt)
2003Spectrometric Analysis of Cast Iron by Direct Reading Optical Emission Vacuum Spectrometer - Point to Plane Technique
IS 15905 (pdf)
IS 15905 (txt)
2011Hubless Centrifugally Cast (Spun) Iron Pipes, Fittings and Accessories - Spigot Series

Last Updated: September 6, 2013