Divisional Index ↑

Public Safety Standards of the Republic of India

Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.

Division Name: Metallurgical Engineering
Section Name: Mechanical Testing of Metals (MTD 3)

StandardYearTitleIBR
IS 1403-1 (pdf)
IS 1403-1 (txt)
1993Mechanical testing of metals - Reverse bend test, Part 1: Sheet, stripISO 7799
IS 1499 (pdf)
IS 1499 (txt)
1977Method for Charpy Impact Test (U-notch) for Metals
IS 1500 (pdf)
IS 1500 (txt)
2005Method for Brinell Hardness Test for Metallic MaterialsISO 6506-1
IS 1501 (pdf)
IS 1501 (txt)
2002Method For Vickers Hardness Test for Metallic Materials
IS 1586-2 (pdf)
IS 1586-2 (txt)
2012Metallic Materials - Rockwell Hardness Test, Part 2: Verification and Calibration of Testing Machines ( Scales A,B,C,D,E,F,G,H, K, N,T)ISO 6508-2:2005
IS 1586 (pdf)
IS 1586 (txt)
2000Method for Rockwell Hardness Test for Metallic Material (Scales A-B-C-D-E-F-G-H-K 15N, 30N, 45N, 15T, 30T and 45T)ISO 6508 -1:1999
IS 1598 (pdf)
IS 1598 (txt)
1977Method for Izod Impact Test of Metals
IS 1599 (pdf)
IS 1599 (txt)
2012Metallic Materials - Bend TestISO 7438
IS 1608 (pdf)
IS 1608 (txt)
2005Mechanical testing of metals - Tensile TestingISO 6892
IS 1716 (pdf)
IS 1716 (txt)
1985Method for Reverse bend Test for Metallic Wire
IS 1717 (pdf)
IS 1717 (txt)
2012Metallic Materials - Wire - Simple Torsion TestISO 7800:2003
IS 1754 (pdf)
IS 1754 (txt)
2002Method for Verification of Vickers Hardness Testing Machines
IS 1755 (pdf)1983Method for wrapping test for metallic wireISO 7802
IS 1757 (pdf)1988Method for charpy impact test (V notch) for metallic material
IS 1828-1 (pdf)
IS 1828-1 (txt)
2005Metallic Materials - Verification of Static Uniaxial Testing Machines, Part 1: Tension/compression testing Machines - Verification and calibration of the force-measuring systemsISO 7500-1
IS 1828-2 (pdf)
IS 1828-2 (txt)
2002Metallic Materials - Verification of Static Uniaxial Testing Machines, Part 2: Tension Creep Testing Machines - Verification of the Applied LoadISO 7500-2
IS 2281 (pdf)
IS 2281 (txt)
2005Method for Verification of Brinell Hardness Testing MachinesISO 6506-2
IS 2328 (pdf)2005Method for flattening test on metallic tubes
IS 2329 (pdf)2005Method for bend test on metallic tubes (in full section)
IS 2330 (pdf)2011Metallic Materials - Tube - Flanging Test
IS 2335 (pdf)2005Method of Drift Expanding Test on Metallic TubesISO 8493
IS 2854 (pdf)
IS 2854 (txt)
1990Determination of young's modulus,tangent modulus and chord modulus - Test method
IS 2855 (pdf)
IS 2855 (txt)
1991Thermostat metals - Determination of flexivity
IS 3394 (pdf)
IS 3394 (txt)
1985Method for Accelerated Life Test of Electrical Resistance Alloys for Heating Elements
IS 3407-1 (pdf)
IS 3407-1 (txt)
1983Method for Creep Testing of Steel at Elevated Temperatures, Part 1: Tensile Creep Testing
IS 3407-2 (pdf)
IS 3407-2 (txt)
1983Method for Creep Testing of Steel at Elevated Temperatures, Part 2: Tensile Creep Stress Rupture Testing
IS 3410 (pdf)
IS 3410 (txt)
1993Metallic materials - Determination of linear thermal expansion
IS 3711 (pdf)
IS 3711 (txt)
2012Steel And Steel Products- Location and Preparation of Samples And Test Pieces For Mechanical Testing
IS 3766 (pdf)
IS 3766 (txt)
1977Method for calibration of pandulum impact testing machines for testing metals
IS 3803-1 (pdf)
IS 3803-1 (txt)
1989Steel - Conversion of Elongation Values, Part I: Carbon, loow alloy steelsISO 2566-1
IS 3803-2 (pdf)
IS 3803-2 (txt)
1989Steel - Conversion of Elongation Values, Part 2: Austenitic steelsISO 2566-2
IS 3848 (pdf)
IS 3848 (txt)
1981Method for end quench test for hardenability of steel
IS 4132 (pdf)
IS 4132 (txt)
2005Method for calibration of standardized blocks to be used for Brinell hardness teing machines
IS 4133-1 (pdf)
IS 4133-1 (txt)
1986Method for Calibration of Standardized Blocks to be Used for Vickers Hardness Testing Machines, Part 1: HV 0.2 to HV 100
IS 4133 (pdf)
IS 4133 (txt)
2002Method for Calibration of Standardized Blocks to be Used for Vickers Hardness Testing Machines
IS 4169 (pdf)
IS 4169 (txt)
1988Method for calibration of force-proving instruments used for the verification of uniaxial testing machines
IS 4258 (pdf)2011Metallic Materials - Conversion of Hardness ValuesISO18265:2003
IS 5069 (pdf)
IS 5069 (txt)
1982Glossary of terms relating to methods of mechanical testing of metals
IS 5070 (pdf)
IS 5070 (txt)
1985Method for beam unnotched impact test for grey cast iron
IS 5074 (pdf)
IS 5074 (txt)
1969Method for axial load fatigue testing of steel
IS 5075 (pdf)
IS 5075 (txt)
1985Method of rotating bar bending fatigue testing of metals
IS 5242 (pdf)1979Method of test for determining shear strength of metals
IS 5699 (pdf)
IS 5699 (txt)
1970Method for chill testing of cast iron
IS 6243 (pdf)1985Method of hydrogen embrittlement test for copper
IS 6885-1 (pdf)
IS 6885-1 (txt)
2011Metallic materials - Knoop hardness test, Part 1: Test methodISO 4545-1:2005
IS 6885-2 (pdf)
IS 6885-2 (txt)
2011Metallic materials - knoop hardness test, Part 2: Verification and calibration of testing machines4545-2:2005
IS 6885-4 (pdf)
IS 6885-4 (txt)
2011Metallic Materials - Knoop Hardness Test, Part 4: Table of Hardness Values
IS 6885 (pdf)
IS 6885 (txt)
1975Method for Knoop Hardness Testing of Metals
IS 6886 (pdf)
IS 6886 (txt)
1973Method for dynamic force calibration of axial load fatigue testing machines by means of a strain gauge technique
IS 7095 (pdf)1973Method for Verification of Knoop Hardness Testing Machines
IS 7096 (pdf)
IS 7096 (txt)
1981Method for scleroscope hardness testing for metallic materials
IS 7097 (pdf)
IS 7097 (txt)
1973Method for Calibration of Standardized Blocks for Verification of Knoop Hardness Testing Machines
IS 7172 (pdf)
IS 7172 (txt)
1984Method for verification of scleroscope hardness testing machines
IS 8632 (pdf)
IS 8632 (txt)
1977Specification for Method for identification of test-piece axesISO 3785:1976
IS 10166 (pdf)1982Method for calibration of standardized test block for verification of scleroscope hardness testing equipments
IS 10167 (pdf)1982Method for upsetting test on metallic materials
IS 10175-1 (pdf)
IS 10175-1 (txt)
1993Mechanical testing of metals -Modified erichsen cupping test - sheet and strip Pt 1 Thickness upto 2 mmISO 8490
IS 10180 (pdf)
IS 10180 (txt)
1982Method for plain strain fracture toughness testing of metals
IS 10181 (pdf)
IS 10181 (txt)
1982Method for determination of magnetic permeability of iron and steel
IS 10623 (pdf)
IS 10623 (txt)
1983Drop Weight Tear Test on Ferritic Steels and Line Pipe
IS 10636-1 (pdf)
IS 10636-1 (txt)
1983Methods for Measurement of Abrasive Wear Properties of Metallic Material, Part 1: Test Method for Gouging Abrasion Resistance (Jaw Crusher Test)
IS 10636-2 (pdf)1983Method for Measurement of Abrasive Wear Properties of Metallic Material, Part 2: Test Method for High Stress Abrasion
IS 10636-3 (pdf)
IS 10636-3 (txt)
1983Methods for Measurement of Abrasive Wear Properties of Metallic Material, Part 3: Test Methods for Low Stress Abrasion
IS 11083 (pdf)
IS 11083 (txt)
1984Method for Evaluation of Friction and Wear Properties of Materials Against Steel Surface
IS 11240 (pdf)1985Method for falling weight test on metallic materials
IS 11999 (pdf)
IS 11999 (txt)
2007Method for determination of plastic strain ratio 'r' for steel metalsISO 10113
IS 12260 (pdf)1987Method for Ring Expanding Test on Metallic TubesISO 8495
IS 12261 (pdf)1987Method for reverse torsion test for metallic wire
IS 12278 (pdf)2011Metallic Materials - Tube - Ring Tensile TestISO 8496:1998
IS 12514 (pdf)
IS 12514 (txt)
1988Method for torsional stress fatigue testing
IS 12872 (pdf)
IS 12872 (txt)
2011Metallic Materials - Calibration of Extensometers Used in Uniaxial TestingISO 9513:1999
IS 13237 (pdf)
IS 13237 (txt)
1991Metallic foils - Tension testing
IS 13838 (pdf)
IS 13838 (txt)
1993Mechanical testing of metals - Determination of poisson's rates
IS 15420 (pdf)
IS 15420 (txt)
2003Metallic Materials - Charpy Pendulum Impact Test - Preparation and Characterization of Charpy V Reference Test Pieces for Verification of Test Machines
IS 15756 (pdf)
IS 15756 (txt)
2007Metallic materials - Sheet and strip - Determination of tensile strain hardening exponentISO 10275

Last Updated: September 6, 2013