Divisional Index ↑

Public Safety Standards of the Republic of India

Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.

Division Name: Metallurgical Engineering
Section Name: Powder Metallurgical Materials and Products (MTD 25)

StandardYearTitleIBR
IS 4840 (pdf)
IS 4840 (txt)
2006Metal powders - Determination of flow time by means of a calibrated funnel (hall flowmeter)ISO 4490
IS 4841 (pdf)1982Method for determination of density of sintered metallic materials
IS 4842 (pdf)1982Method for transverse testing of hardmetals
IS 4848 (pdf)
IS 4848 (txt)
1981Method for Determination of Apparent Density of Free Flowing Powders for Powder Metallurgical Purposes
IS 4857 (pdf)
IS 4857 (txt)
2005Metallic powders,excluding powders for hardmetals - Determination of compactibility (compressibility) in uniaxial compressionISO 3927
IS 5432 (pdf)
IS 5432 (txt)
1982Glossary of terms relating to powder metallurgy
IS 5461 (pdf)
IS 5461 (txt)
1984Method for sieve analysis of metal powders
IS 5642 (pdf)
IS 5642 (txt)
1991Permeable sintered metal materials - Determination of density,oil content,and open porosityISO 2738
IS 5644-1 (pdf)
IS 5644-1 (txt)
1993Metallic Powders - determination of Oxygen Content by Reduction Methods, Part 1: General guidelinesISO 4491-1
IS 5644-2 (pdf)
IS 5644-2 (txt)
2005Metallic Powders - determination of Oxygen Content by Reduction Methods, Part 2: Loss of mass on hydrogen reduction (hydrogen loss)ISO 4491-2
IS 5644-3 (pdf)
IS 5644-3 (txt)
2005Metallic Powders - determination of Oxygen Content by Reduction Methods, Part 3: Hydrogen - Reducible oxygenISO 4491-3
IS 5644-4 (pdf)
IS 5644-4 (txt)
1993Metallic Powders - determination of Oxygen Content by Reduction Methods, Part 4: Total oxygen by reduction extractionISO 4491-4
IS 5652-1 (pdf)1993Hardmetals - Rockwell Hardness Test (Scale A), Part 1: Test Method
IS 6492 (pdf)
IS 6492 (txt)
1972Methods for sampling of powders for powder metallurgical purposes
IS 7438 (pdf)1985Method for test for acid-insoluble content in iron, copper, tin, and bronze powders
IS 7505 (pdf)1985Cobalt powder for hardmetals
IS 7506 (pdf)1987Nickel Powder
IS 7512 (pdf)
IS 7512 (txt)
2006Method for the determination of average particle size of metal powders by fisher sub-sieve sizer
IS 7970 (pdf)1987Tantalum Powder for Capacitors
IS 8367 (pdf)1993Tin powder
IS 8368 (pdf)2010Tungsten Carbide Powder for Hardmetals
IS 8369 (pdf)2010Titanium carbide powder for hardmetals
IS 8370 (pdf)1977Iron powder for powder metallurgical aplications
IS 8392 (pdf)1985Tungsten powder for hardmetals
IS 8485 (pdf)1977Copper powder for powder metallurgical applications
IS 8871 (pdf)
IS 8871 (txt)
2004Metallic Powders - Determination of tap densityISO 3953
IS 8876 (pdf)
IS 8876 (txt)
1978Method for the determination of residue on chlorination of tungsten metal powder
IS 10035 (pdf)1993Bronze powder for metallic filters
IS 10385 (pdf)1982Method for determination of radial crushing strength of sintered metal powder bearings
IS 11110 (pdf)1984Copper lead powder
IS 11111 (pdf)1984Leaded bronze powders
IS 11506 (pdf)
IS 11506 (txt)
2004Lubricated metal-powder mixes - Determination of lubricant content - Modified Soxhlet extraction methodISO 13944
IS 11518 (pdf)1985Determination of (the magnetization) coercivity in hardmetals
IS 11520 (pdf)1985Method for metallographic sample preparation of hardmetals
IS 11627 (pdf)1986Method for determination of apparent density of metallic powders by Scott volumeter
IS 11959 (pdf)1987Method for metallographic determination of microstructure in hardmetals
IS 11960 (pdf)1987Methods for metallographic determination of apparent porosity and uncombined carbon in hardmetals
IS 12279 (pdf)
IS 12279 (txt)
2005Method for determination of transverse rupture strengh of sintered metal materials (excluding hardmetals)
IS 12286 (pdf)1988Method for determination of abrasive wear resistance of hardmetals
IS 12473-1 (pdf)1988Chemical Analysis of Hardmetals by Flame Atomic Absorption Spectrometry, Part 1: General Requirements
IS 12473-2 (pdf)1988Chemical Analysis of Hardmetals by Flame Atomic Absorption Spectrometry, Part 2: Determination of Calcium, Potassium, Magnesium and Sodium in Contents from 0
IS 12473-3 (pdf)
IS 12473-3 (txt)
1988Chemical Analysis of Hardmetals by Flame Atomic Absorption Spectrometry, Part 3: Determination of cobalt,iron ,manganese and nickel in contents from 0.01 to 0.5 percent (m/m)
IS 12473-4 (pdf)1988Chemical Analysis of Hardmetals by Flame Atomic Absorption Spectrometry, Part 4: Determination of Molybdenum, Titanium and Vanadium in Contents from 0.01 to
IS 12473-5 (pdf)
IS 12473-5 (txt)
1988Chemical Analysis of Hardmetals by Flame Atomic Absorption Spectrometry, Part 5: Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0.5 to 2 percent (m/m)
IS 12473-6 (pdf)1988Chemical Analysis of Hardmetals by Flame Atomic Absorption Spectrometry, Part 6: Determination of chromium in contents from 0.01 to 2 percent (m/m)
IS 12483 (pdf)1988Determination of Titanium in Hardmetals by Spectrophotometric Method
IS 12513 (pdf)1988Determination of cobalt in hardmetals by potentiometric method
IS 12539 (pdf)1988Determination of total carbon in hardmetals by gravimetric method
IS 12548 (pdf)1988Determination of insoluble (free) carbon in hardmetals by gravimetric method
IS 12570 (pdf)1988Method for Determination of Dimensional Changes Associated with Compacting and Sintering of Metallic Powders (Excluding Powders for Hardmetals)
IS 12571 (pdf)1988Method for Determination of Green Strength by Transverse Rupture of Rectangular Compacts of Metallic Powder
IS 12783 (pdf)
IS 12783 (txt)
1989Hardmetals - Vickers Hardness Test
IS 13780 (pdf)
IS 13780 (txt)
1993Hardmetals - Compression TestISO 4506
IS 13781 (pdf)
IS 13781 (txt)
1993Permeable sintered metal materials - Determination of bupple test pore sizeISO 4003
IS 13782 (pdf)
IS 13782 (txt)
1993Permeable sintered metal materials - Determination of fluid permeabilityISO 4022
IS 13803 (pdf)1993Sintered metal materials and hardmetals - Determination of young modulusISO 3312
IS 15554 (pdf)
IS 15554 (txt)
2004Sintered Metal Materials, Excluding Hardmetals - Tensile Test Pieces
IS 15567 (pdf)
IS 15567 (txt)
2005Sintered metal materials, excluding hardmetals - gatigue test piecesISO 3928
IS 15574 (pdf)2005Sintered Metal Materials, excluding Hard metals - Unnotched Impact Test Piece
IS 15585 (pdf)
IS 15585 (txt)
2005Mintered Metal Materials5755
IS 15703 (pdf)
IS 15703 (txt)
2006Sintered metal materials, excluding hardmetals - determination of apparent hardness and microhardnessISO 4498
IS/ISO 4507 (pdf)
IS/ISO 4507 (txt)
2000Sintered Ferrous Materials, Carburized or Carbonitrided - Determination and Verification of Case-Hardening Depth by A Micro-Hardness TestISO 4507:2000

Last Updated: September 6, 2013