Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.
Division Name: Metallurgical Engineering
Section Name: Alloy Steels and Forgings (MTD 16)
Standard | Year | Title | IBR |
---|---|---|---|
IS 228-5 (pdf) IS 228-5 (txt) | 1987 | Methods of chemical analysis of steels, Part 5: Determination of nickel by dimethyl glyoxime (gravimetric) method (for nickel greater than or equal to 0.1 percent | |
IS 228-6 (pdf) IS 228-6 (txt) | 1987 | Methods for Chemical Analysis of Steels, Part 6: Determination of Chromium by Persulphate Oxidation Method (for Chromium>0.1 Percent) | |
IS 228-7 (pdf) IS 228-7 (txt) | 1990 | Methods of chemical analysis of steels, Part 7: Determination of molybdenum by alpha-benzoinoxime method (for molybdenum 1 percent and not containing tungsten) | |
IS 228-10 (pdf) | 1989 | Methods of chemical analysis of steels, Part 10: Determination of molybdenum by thiocynate (photometric) method in low and high alloy steels (for molybdenum 0.01 to 1.5 percent) | |
IS 228-11 (pdf) IS 228-11 (txt) | 1990 | Methods of chemical analysis of steels, Part 11: Determination of total silicon by reduced molyddosilicate spectro photo metric method in carbon steels and low alloy steels (for silicon 0.01 to 0.05 percent) | |
IS 228-12 (pdf) IS 228-12 (txt) | 2001 | Methods of chemical analysis of steels, Part 12: Determination of manganese by periodate spectrophotometric method in low and high alloy steels (for manganese 0.01 to 5.0 percent) | |
IS 228-13 (pdf) IS 228-13 (txt) | 1982 | Methods for Chemical Analysis of Steels, Part XIII: Determination of Arsenic | |
IS 228-15 (pdf) IS 228-15 (txt) | 1992 | Methods of chemical analysis of steels, Part 15: Determination of copper by thiosulphate iodide method (for copper 0.05 to 5 percent) | |
IS 228-16 (pdf) IS 228-16 (txt) | 1992 | Methods of chemical analysis of steels, Part 16: Determination of tungsten by spectrophotometric method (for tungsten 0.1 to 2 percent) | |
IS 228-18 (pdf) IS 228-18 (txt) | 1998 | Methods of chemical analysis of steels, Part 18: Determination of oxygen by instrumental method | |
IS 963 (pdf) | 1958 | Chrome molybdenum steel bars and rods for aircraft purposes | |
IS 1570-1 (pdf) IS 1570-1 (txt) | 1978 | Schedules for wrought steels, Part 1: Steels specified by tensile and/or yield properties | |
IS 1570-2-1 (pdf) IS 1570-2-1 (txt) | 1979 | Schedules for Wrought Steels, Part 2: Carbon Steels (Unalloyed Steels), Section 1: Wrought Products (Other Than Wires) With Specified Chemical Composition and Related Properties | |
IS 1570-2-2 (pdf) IS 1570-2-2 (txt) | 1987 | Schedules for Wrought Steels, Part 2: Carbon Steels (Unalloyed Steels), Section 2: Carbon Steel Wires with Related Properties | |
IS 1570-2 (pdf) | 1979 | Schedules for Wrought Steels, Part 2: Carbon Steels (Unalloyed Steels) | |
IS 1570-3 (pdf) IS 1570-3 (txt) | 1979 | Schedules for wrought steels, Part 3: Carbon and carbon manganese free cutting steels | |
IS 1570-4 (pdf) IS 1570-4 (txt) | 1988 | Schedules for wrought steels, Part 4: Alloy steels (Alloy constructional and spring steels) with specified chemical composition andd mechanical properties | |
IS 1570-5 (pdf) IS 1570-5 (txt) | 1985 | Schedules for Wrought Steels, Part 5: Stainless and Heat-resisting Steels | |
IS 1570-6 (pdf) IS 1570-6 (txt) | 1996 | Schedules for Wrought Steels, Part 6: Carbon and Alloy Tool Steels | |
IS 1570-7 (pdf) IS 1570-7 (txt) | 1992 | Schedule for wrought steels, Part 7: Steels for elevated temperature service (creep resistant steels) | |
IS 1870 (pdf) IS 1870 (txt) | 1965 | Comparison of Indian and overseas standards for wrought steels for general engineering purposes | |
IS 1871-1 (pdf) IS 1871-1 (txt) | 1987 | Commentary on Indian Standard Schedules for Wrought Steels, Part 1: Steels Specified by Tensile and/or Yield Properties | |
IS 1871-2 (pdf) IS 1871-2 (txt) | 1987 | Commentary on Indin Standard Schedules for wrought steels, Part 2: Carbon steels (unalloyed steels) (Complementary to IS 1570 Part 2):1979) | |
IS 1871-3 (pdf) IS 1871-3 (txt) | 1987 | Commentary on Indian Standard Schedules for Wrought Steels, Part 3: Carbon and Carbon Manganese Free Cutting Steels | |
IS 1875 (pdf) IS 1875 (txt) | 1992 | Carbon steel billets, blooms, slabs and bars for forgings | |
IS 1956-6 (pdf) | 1976 | Glossary of Terms Relating to Iron and Steel, Part 6: Forging (including drop forging) | |
IS 2004 (pdf) IS 2004 (txt) | 1991 | Carbon steel forgings for general engineering purposes | |
IS 2611 (pdf) IS 2611 (txt) | 1964 | Carbon chromium molybdenum steel forgings for high temperature services | |
IS 3261 (pdf) IS 3261 (txt) | 1980 | Carbon steel forgings for shipbuilding industry | |
IS 3445 (pdf) IS 3445 (txt) | 1992 | Forged steel rolls | |
IS 3469-1 to 3 (pdf) IS 3469-1 to 3 (txt) | 1974 | Tolerances for Closed Die Steel Forgings | |
IS 3479 (pdf) IS 3479 (txt) | 1966 | General requirements for steel drop, upset and press forgings | |
IS 3739 (pdf) IS 3739 (txt) | 1987 | Dimensional tolerances for carbon and alloy constructional steel products | |
IS 3748 (pdf) | 1990 | Tool and Die Steels | |
IS 3930 (pdf) IS 3930 (txt) | 1994 | Flame and induction hardening steels | |
IS 4367 (pdf) | 1991 | Alloy steel forgings for general industrial use | |
IS 4368 (pdf) | 1967 | Alloy steel billets, blooms and slabs for forging for general engineering purposes | |
IS 4397 (pdf) IS 4397 (txt) | 1999 | Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages/Retainers | |
IS 4398 (pdf) | 1994 | Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races | |
IS 4430 (pdf) | 1979 | Mould Steels | |
IS 4431 (pdf) | 1978 | Carbon and carbon manganese free cutting steels | |
IS 4432 (pdf) IS 4432 (txt) | 1988 | Case hardening steels | |
IS 4882 (pdf) IS 4882 (txt) | 1979 | Low Carbon Steel Wire for Rivets for Use in Bearing Industry | |
IS 5489 (pdf) IS 5489 (txt) | 1975 | Carburizing steels for use in bearing industry | |
IS 5517 (pdf) | 1993 | Steels for Hardening and Tempering | |
IS 5518 (pdf) IS 5518 (txt) | 1996 | Steels for die blocks for drop forging | |
IS 5522 (pdf) IS 5522 (txt) | 1992 | Stainless steel sheets and strips for utensils | |
IS 5651 (pdf) IS 5651 (txt) | 1987 | Steels for Pneumatic Tools | |
IS 6527 (pdf) | 1995 | Stainless steel wire rod | |
IS 6528 (pdf) IS 6528 (txt) | 1995 | Stainless steel wire | |
IS 6529 (pdf) | 1996 | Stainless steel blooms, billets and slabs for forging | |
IS 6603 (pdf) IS 6603 (txt) | 2001 | Stainless Steel Bars and Flats | |
IS 6911 (pdf) IS 6911 (txt) | 1992 | Stainless steel plate, sheet and strip | |
IS 7291 (pdf) IS 7291 (txt) | 1981 | High speed tool steels | |
IS 7494 (pdf) IS 7494 (txt) | 1981 | Steel for valves for internal combustion engines | |
IS 8748 (pdf) | 1978 | Forged/rolled CTC segments | |
IS 8811 (pdf) IS 8811 (txt) | 1998 | Method for Emission Spectrometric Analysis of Plain Carbon and Low Alloy Steels Point to Plane Technique | |
IS 9175-1 (pdf) IS 9175-1 (txt) | 1979 | Rationalized Steels for the Automobile and Ancillary Industry, Part 1: Chemical Composition | |
IS 9175-2 (pdf) | 1985 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties, Part 2: 15c8 Grade Steel | |
IS 9175-3 (pdf) | 1985 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 3 25C8 Grade Steel | |
IS 9175-4 (pdf) | 1985 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 4 30C8 Grade Steel | |
IS 9175-5 (pdf) | 1985 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 5 35C8 Grade Steel | |
IS 9175-6 (pdf) IS 9175-6 (txt) | 1986 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 6 40C8 Grade Steel | |
IS 9175-7 (pdf) IS 9175-7 (txt) | 1986 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 7 45C8 Grade steel | |
IS 9175-8 (pdf) | 1985 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties, Part 8: 55C8 Grade Steel | |
IS 9175-9 (pdf) | 1985 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 9 11C10S25 Grade steel | |
IS 9175-10 (pdf) | 1985 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 10 14C14S14 Grade steel | |
IS 9175-11 (pdf) | 1985 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 11 25C12S14 Grade steel | |
IS 9175-12 (pdf) | 1988 | Rationalized steels for the automobile and Ancillary Industry, Part 12: Mechanical and Physical Properties of 35 Mn6Mo3S15 | |
IS 9175-13 (pdf) IS 9175-13 (txt) | 1987 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 13 40C15S12 Grade steel | |
IS 9175-15 (pdf) IS 9175-15 (txt) | 1987 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 15 37C15 Grade steel | |
IS 9175-16 (pdf) IS 9175-16 (txt) | 1987 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 16 35Mn6Mo3 Grade steel | |
IS 9175-17 (pdf) IS 9175-17 (txt) | 1987 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 17 35Mn6Mo4 Grade steel | |
IS 9175-18 (pdf) | 1987 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 18 15Cr3 Grade steel | |
IS 9175-19 (pdf) | 1986 | Rationalized Steels for the Automobile and Ancillary Industry, Part 19: Mechanical and Physical Properties of 16Mn5Cr4 Grade Steel | |
IS 9175-20 (pdf) IS 9175-20 (txt) | 1986 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 20 20MnCr5 Grade steel | |
IS 9175-21 (pdf) | 1987 | Rationalized Steels for the Automobile and Ancillary Industry, Part 21: Mechanical and Physical Properties of 40Cr4 Grade Steel | |
IS 9175-22 (pdf) IS 9175-22 (txt) | 1987 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 22 40Cr4Mo3 Grade steel | |
IS 9175-23 (pdf) | 1987 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 23 25Cr13Mo6 Grade steel | |
IS 9175-24 (pdf) IS 9175-24 (txt) | 1987 | Rationalized Steels for the Automobile and Ancillary Industry, Part 24: Mechanical and Physical Properties of 35Ni5Cr2 Grade Steel | |
IS 9175-25 (pdf) IS 9175-25 (txt) | 1987 | Rationalized Steels for the Automobile and Ancillary Industry, Part 25: Mechanical and Physical Properties of 15Ni5Cr4mo1 Grade Steel | |
IS 9175-26 (pdf) | 1986 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 26 16Ni3Cr2 Grade steel | |
IS 9175-27 (pdf) IS 9175-27 (txt) | 1987 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 27 15Ni7Cr4MO2 Grade steel | |
IS 9175-28 (pdf) | 1987 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 28 40Ni6Cr4Mo3 Grade steel | |
IS 9175-29 (pdf) IS 9175-29 (txt) | 1987 | Rationalized Steels for the Automobile and Ancillary Industry, Part 29: Mechanical and Physical Properties of 40Ni10Cr3Mo6 Grade Steel | |
IS 9175-30 (pdf) IS 9175-30 (txt) | 1987 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 30 20Ni7CrMo2 Grade steel | |
IS 9175-31 (pdf) | 1987 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 31 20Ni7Mo2 Grade steel | |
IS 9175-32 (pdf) | 1987 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 32 20NiCrMo2 Grade steel | |
IS 9175-33 (pdf) | 1988 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 33 42Cr6V10 Grade steel | |
IS 9175-34 (pdf) | 1986 | Rationalized Steels for Automobile and Ancillary Industry, Mechanical and Physical Properties - Part 34 14CrNi6 Grade steel | |
IS 9294 (pdf) | 1979 | Cold-Rolled Stainless Steel Strips for Razor Blades | |
IS 9516 (pdf) IS 9516 (txt) | 1980 | Heat resisting steel | |
IS 9683 (pdf) IS 9683 (txt) | 1980 | Carbon and low alloy steel forgings for fired and unfired pressure vessels | |
IS 9684 (pdf) IS 9684 (txt) | 1980 | Technical conditions for the supply of hot rolled billets blooms, slabs and bars for closed die forgings | |
IS 9879 (pdf) IS 9879 (txt) | 1998 | Method for Emission Spectrometric Analysis of Austentic and Ferritic Stainless Steels Point to Plane Technique | |
IS 10604-1 (pdf) IS 10604-1 (txt) | 1983 | Machining allowances and tolerances for open die steel forgings, Part 1: carbon and low alloy steel forgings | |
IS 10604-2 (pdf) IS 10604-2 (txt) | 1983 | Machining allowances and tolerances for open die steel forgings, Part 2: High alloy steel forgings | |
IS 10631 (pdf) IS 10631 (txt) | 1983 | Stainless steel for welding electrode core wire | |
IS 10632-1 (pdf) IS 10632-1 (txt) | 1983 | Non Magnetic stainless steels for electrical applications, Part 1: General requirements | |
IS 10632-2 (pdf) IS 10632-2 (txt) | 1983 | Non Magnetic stainless steels for electrical applications, Part 2: Specific requirements for binding wire | |
IS 10632-3 (pdf) IS 10632-3 (txt) | 1983 | Non Magnetic stainless steels for electrical applications, Part 3: Specific requirements for sheets, strips and plates for electrical appliances | |
IS 11169-1 (pdf) IS 11169-1 (txt) | 1984 | Steels for cold heading/cold extrusion application, Part 1: Wrought carbon and low alloy steels | |
IS 11169-2 (pdf) IS 11169-2 (txt) | 1989 | Steels forcold heading/cold extrusion, Part 2: Stainless steel | |
IS 11185 (pdf) | 1984 | Technical supply conditions for hot rolled and forged steel bars for use in machine tool industry | |
IS 11946 (pdf) IS 11946 (txt) | 1987 | Soft magnetic iron strips | |
IS 11947 (pdf) IS 11947 (txt) | 1987 | Soft magnetic iron rods, bars, flats and sections | |
IS 11952 (pdf) IS 11952 (txt) | 1986 | Steels for piston pins (Gudgeon pins) | |
IS 12045 (pdf) IS 12045 (txt) | 1987 | Alloys used in electrical resistance metallic heating elements | |
IS 12145 (pdf) IS 12145 (txt) | 1987 | Quenched and tempered alloy steel forgings for pressure vessels | |
IS 12146 (pdf) IS 12146 (txt) | 1987 | Carbon manganese steel forgings for pressure vessels | |
IS 12390 (pdf) | 1988 | Iron nickel alloy 36 for ceramic sealing | |
IS 12391 (pdf) IS 12391 (txt) | 1988 | Iron nickel controlled expansion sealing alloys | |
IS 12549 (pdf) IS 12549 (txt) | 1988 | Iron nickel cobalt sealing alloys | |
IS 12658 (pdf) IS 12658 (txt) | 1989 | Grinding Media Rolled/Forged Carbon and Carbon-Chromium Steels | |
IS 12836 (pdf) | 1989 | 36-Nickel Iron Soft Magnetic Rods | |
IS 12881 (pdf) | 1990 | 36-Nickel Iron Soft Magnetic Strips | |
IS 12882 (pdf) | 1990 | 48-Nickel iron soft magnetic strip | |
IS 13352 (pdf) IS 13352 (txt) | 1992 | Stock for forgings produced f rom continuously bast billets , blooms, slabs and bars | |
IS 13387 (pdf) | 1992 | Tool steel forgings for metal forming | |
IS 13795-1 (pdf) IS 13795-1 (txt) | 1993 | Glossary of terms for special alloys, Part 1: Soft magnetic marterials | |
IS 14331 (pdf) IS 14331 (txt) | 1995 | Steels for high temperature bolting applications | |
IS 14652 (pdf) IS 14652 (txt) | 1999 | 18 Percent Nickel Maraging Steel Bars and Rods | |
IS 14698 (pdf) IS 14698 (txt) | 1999 | Carbon and Low Alloy Steel Billets, Blooms, Slabs and Bars for Manufacture of Shell Bodies and Proof Shots Used in Defence Services |
Last Updated: September 6, 2013
↑