Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.
Division Name: Metallurgical Engineering
Section Name: Refractories (MTD 15)
Standard | Year | Title | IBR |
---|---|---|---|
IS 6 (pdf) IS 6 (txt) | 1983 | Moderate Heat Duty Fireclay Refractories, Group 'A' | |
IS 8 (pdf) | 1994 | High Heat Duty Fireclay Refractories | |
IS 195 (pdf) | 2005 | Fireclay Mortar for Laying Fireclay Refractory Bricks | |
IS 483 (pdf) | 1972 | Fireclay Refractories for Oil-fired Boiler Furnaces of Naval Ships | |
IS 484 (pdf) IS 484 (txt) | 1980 | Silica Refractories for General Purposes | |
IS 1292 (pdf) | 1991 | Silica mortar for laying silica bricks in furnaces | |
IS 1522 (pdf) | 1998 | Fireclay Blocks for Glass Tank Furnace - | |
IS 1523 (pdf) IS 1523 (txt) | 1972 | Bottom pouring refractories for steel plants | |
IS 1524 (pdf) | 1968 | Refractory Sleeves | |
IS 1525 (pdf) IS 1525 (txt) | 1968 | Ladle refractories for steel plants | |
IS 1526 (pdf) | 1960 | Sizes and Shapes for Firebricks (230 mm Series) | |
IS 1528-1 (pdf) IS 1528-1 (txt) | 2010 | METHODS OF SAMPLING AND PHYSICAL TESTS FOR REFRACTORY MATERIALS, Part 1: DETERMINATION OF PYROMETRIC CONE EQUIVALENT (PCE) OR SOFTENING POINT | |
IS 1528-2 (pdf) IS 1528-2 (txt) | 2011 | Methods of Sampling and Physical Tests for Refractory Materials, Part 2: Determination of Refractoriness Under Load | |
IS 1528-3 (pdf) IS 1528-3 (txt) | 2010 | Methods of Sampling and Physical Tests for Refractory Materials, Part 3: Determination of Spalling resistance | |
IS 1528-4 (pdf) IS 1528-4 (txt) | 2012 | Methods of Sampling and Physical Tests for Refractory Materials, Part IV: Determination of Cold Crushing Strength of Dense Shaped Refratories Products | |
IS 1528-5 (pdf) IS 1528-5 (txt) | 2007 | Methods of Sampling and Physical Tests for Refractory Materials, Part 5: Method for Determination of Modulus of Rupture at Ambient Temperature of dense and insulating shaped refractory products | ISO 5014 |
IS 1528-6 (pdf) IS 1528-6 (txt) | 2010 | METHODS OF SAMPLING AND PHYSICAL TESTS FOR REFRACTORY MATERIALS, Part 6: DETERMINATION OF PERMANENT LINEAR CHANGE AFTER REHEATING FOR SHAPED INSULATING AND DENSE REFRACTORIES | |
IS 1528-7 (pdf) IS 1528-7 (txt) | 2010 | METHODS OF SAMPLING AND PHYSICAL TESTS FOR REFRACTORY MATERIALS, Part 7: METHODS OF SAMPLING AND CRITERIA FOR CONFORMITY | |
IS 1528-9 (pdf) IS 1528-9 (txt) | 2007 | Methods of Sampling and Physical Tests for Refractory Materials, Part 9: Determination of True Density | ISO 5018 |
IS 1528-10 (pdf) IS 1528-10 (txt) | 1974 | Methods of Sampling and Physical Tests for Refractory Materials, Part X: Determination of Size of Refractory Bricks | |
IS 1528-11 (pdf) | 1993 | Methods of Sampling and Physical Tests for Refractory Materials, Part 11: Determination of Warpage | |
IS 1528-12 (pdf) IS 1528-12 (txt) | 2007 | Methods of Sampling and Physical Tests for Refractory Materials, Part 12: Method for Determination of Bulk Density and true porosity of shaped insulating refractory products | ISO 5016 |
IS 1528-13 (pdf) IS 1528-13 (txt) | 2007 | Methods of Sampling and Physical Tests for Refractory Materials, Part 13: Determination of Resistance to Carbon monoxide | ISO 12676 |
IS 1528-14 (pdf) IS 1528-14 (txt) | 1974 | Methods of Sampling and Physical Tests for Refractory Materials, Part XIV: Determination of Sieve Analysis | |
IS 1528-15 (pdf) IS 1528-15 (txt) | 2007 | Methods of Sampling and Physical Tests for Refractory Materials, Part 15: Method for determination of bulk density, apparent porosity and true porosity of dense shaped refractory products | ISO 5017 |
IS 1528-16 (pdf) IS 1528-16 (txt) | 2007 | Methods of Sampling and Physical Tests for Refractory Materials, Part 16: Determination of Thermal Conductivity According to Hot-Wire Method (Paralled) | ISO 889402 |
IS 1528-17 (pdf) IS 1528-17 (txt) | 2012 | Methods of Sampling and Physical Tests for Refractory Materials, Part 17: Shaped Insulating Refractory Products - Determination of Cold Crushing Strength | ISO 8895:2004 |
IS 1528-18 (pdf) IS 1528-18 (txt) | 1993 | Methods of Sampling and Physical Tests for Refractory Materials, Part 18: Determination of Creep in Compression | ISO 3187 |
IS 1528-19 (pdf) IS 1528-19 (txt) | 1991 | Methods of Sampling and Physical Tests for Refractory Materials, Part 19: Determination of thermal expansion | |
IS 1528-20 (pdf) | 1993 | Methods of Sampling and Physical Tests for Refractory Materials, Part 20: Determination of Modulus of Rupture at Elevated Temperature | ISO 5013 |
IS 1528-21 (pdf) IS 1528-21 (txt) | 2007 | Methods of sampling and physical tests for refractory materials, Part 21: Determination of thermal conductivity according to hot-wire method (cross-array) | ISO 8894-1 |
IS 1528-22 (pdf) IS 1528-22 (txt) | 2007 | Methods of Sampling and Physical Tests for Refractory Materials, Part 22: Methods for Determination of Permeability to Gases of Dense Shaped Refractoy Products | |
IS 1528-23 (pdf) IS 1528-23 (txt) | 2011 | Methods of Sampling and Physical Tests for Refractory Materials, Part 23: Methods of Test for Dense Shaped Refractory Products - Determination of Resistance to Abrasion at Ambient Temperature | |
IS 1529 (pdf) | 1971 | Blast furnace refractories for steel plants | |
IS 1748 (pdf) | 1981 | Sizes of graphite crucibles | |
IS 1749 (pdf) | 2005 | Burnt magnesite refractories | |
IS 1750 (pdf) | 1995 | Dead burnt pea magnesite | |
IS 1751 (pdf) IS 1751 (txt) | 1984 | Fireclay cupola refrectories | |
IS 2042 (pdf) | 2006 | Insulating bricks | |
IS 2043 (pdf) | 1984 | Siliceous fireclay refractories | |
IS 2044 (pdf) | 2005 | Mullite Refractories for Glass Melting Tank Furnaces | |
IS 3304 (pdf) | 2005 | Burnt magnesite-chrome refractories for general purposes | |
IS 3305 (pdf) | 2005 | Burnt chrome-magnesite refractories for general purposes | |
IS 4041 (pdf) IS 4041 (txt) | 2006 | Terminoloty for refractories | ISO 836 |
IS 4564 (pdf) IS 4564 (txt) | 1968 | Fireclay nozzles | |
IS 4565 (pdf) IS 4565 (txt) | 1968 | Fireclay stoppers | |
IS 4801 (pdf) IS 4801 (txt) | 1980 | Chemically-Bonded Magnesite-Chrome Refractories for Roof Lining | |
IS 4812 (pdf) IS 4812 (txt) | 1996 | Silica refractories for coke oven | |
IS 4813 (pdf) | 1980 | Chemically-bonded chrome-magnesite refractories for general purposes | |
IS 4814 (pdf) | 1980 | Chemically-Bonded Magnesite-Chrome Refractories for General Purposes | |
IS 5495 (pdf) | 1969 | Sizes and shapes for firebricks (300 mm and higher sizes) | |
IS 6727 (pdf) IS 6727 (txt) | 1972 | Fireclay checker bricks for open hearth furnace | |
IS 6728 (pdf) IS 6728 (txt) | 1972 | Recuperator tubes, tiles and collars for soaking pits in steel plants | |
IS 7199 (pdf) | 2008 | Blast Furnace Stove Refractories | |
IS 8953 (pdf) | 2006 | 62 percent alumina bricks and blocks for blast furnace | |
IS 8966 (pdf) IS 8966 (txt) | 1978 | Megnesite nozzles | |
IS 8977 (pdf) IS 8977 (txt) | 1978 | Clay bonded graphite crucibles | |
IS 9010 (pdf) IS 9010 (txt) | 1978 | Super heat duty fireclay refractories | |
IS 9929 (pdf) IS 9929 (txt) | 1981 | Method of determining life of graphite crucibles | |
IS 9930 (pdf) | 2005 | Zircon refractories for glass furnace applications | |
IS 10047 (pdf) IS 10047 (txt) | 1981 | Methods for testing refractory ramming masses | |
IS 10551 (pdf) | 2005 | Zircon mullite refractories for glass furnace applications | |
IS 10570 (pdf) IS 10570 (txt) | 2011 | METHODS OF TESTING REFRACTORY CASTABLES | |
IS 10607 (pdf) IS 10607 (txt) | 1983 | Refractories for cement rotary kilns | |
IS 11036 (pdf) IS 11036 (txt) | 1984 | Graphite stopper heads | |
IS 11452 (pdf) IS 11452 (txt) | 1985 | Method of testing air-setting refractory mortars | |
IS 12847 (pdf) | 1997 | Carbon Bonded Silicon Carbide Crucibles | |
IS 12893 (pdf) | 2006 | Pyrometric Reference Cones for laboratory use | ISO 1146 |
IS 12951 (pdf) | 2006 | Mica Insulation Bricks for High Temperature Application | |
IS 13150 (pdf) | 1991 | Silica mortars for laying silica bricks in cooke ovens | |
IS 13173 (pdf) IS 13173 (txt) | 1991 | Code of practice for handling and usage of graphite and silicon carbide crucibles | |
IS 13185 (pdf) | 1991 | Method of test for determination of drying shrinkage of refractory mortars | |
IS 14313 (pdf) | 1995 | 70 percent alumina bricks | |
IS 14406 (pdf) IS 14406 (txt) | 1996 | Refractories for forge and heat treatment furnaces _ Recommendations | |
IS 14447 (pdf) IS 14447 (txt) | 1997 | Refractories for use in foundry industry - Recommendations | |
IS 15507 (pdf) | 2004 | Basic insulating coating material for application tundish used in steel plants | |
IS 15508 (pdf) | 2004 | Refractory Mass (Basic Gunning) for Steel Plant Application | |
IS 15541 (pdf) IS 15541 (txt) | 2005 | Low cement and ultra low cement castables for general purposes | |
IS 15895 (pdf) IS 15895 (txt) | 2011 | High Alumina Refractory Cement | |
IS 16051-1 (pdf) IS 16051-1 (txt) | 2013 | Refractory Products - Measurement of Dimensions and External Defects of Refractory Bricks, Part 1: Dimensions and Conformity to Drawings | |
IS 16051-2 (pdf) IS 16051-2 (txt) | 2013 | Refractory Products - Measurement of Dimensions and External Defects of Refractory Bricks, Part 2: Corner and Edge Defects and Other Surface Imperfections | |
IS 16052-1 (pdf) IS 16052-1 (txt) | 2013 | Refractory Mortars, Part 1: Determination of Consistency Using the Penetrating Cone Method | |
IS 16052-2 (pdf) IS 16052-2 (txt) | 2013 | Refractory Mortars, Part 2: Determination of Consistency Using the Reciprocating Flow Table Method | |
IS 16052-3 (pdf) IS 16052-3 (txt) | 2013 | Refractory Mortars, Part 3: Determination of Joint Stability | |
IS 16052-4 (pdf) IS 16052-4 (txt) | 2013 | Refractory Mortars, Part 4: Determination of Flexural Bonding Strength | |
IS 16052-5 (pdf) IS 16052-5 (txt) | 2013 | Refractory Mortars, Part 5: Determination of Grain Size Distribution (Sieve Analysis) | |
IS 16052-6 (pdf) | 2013 | Refractory Mortars, Part 6: Determination of Moisture Content of REady-Mixed Mortars | |
SP 37-3 (pdf) | 1987 | Handbook for Refractories, Part 3: Refractories for Cement Kiln System |
Last Updated: September 6, 2013
↑