Table of Codes ↑

Public Safety Standards
United States (Federal Government)

In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them. (See also State and Local codes.)

StandardYearOrganizationTitleCFR Authority
3M 022219953M CorporationOrganochlorine Pesticides and PCBs in Wastewater Using Empore Disk40 CFR 136.3(a) Table ID
AA CONSTRUCT1971Aluminum AssociationAluminum Construction Manual24 CFR 200, Subpart S
AA1967Aluminum AssociationAluminum Construction Manual24 CFR 200, Subpart S
AA DATA1982Aluminum AssociationAluminum Standards and Data, Seventh Edition49 CFR 178.65(b)(2)
AAMA 101-IS21997American Architectural Manufacturers AssociationVoluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors10 CFR 434.402.2.2.4
AAMA 6051998American Architectural Manufacturers AssociationVoluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminum Extrusions and Panels40 CFR 59.401
AAMA 1002.101993American Architectural Manufacturers AssociationAluminum Insulating Products for Windows and Sliding Glass Doors24 CFR 200.938
AAMA 1102.71989American Architectural Manufacturers AssociationVoluntary Specifications for Aluminum Storm Doors10 CFR 440 Appendix A
AAMA 1503.11988American Architectural Manufacturers AssociationVoluntary Test Method for Thermal Transmittance and Condensation Resistance of Windows, Doors and Glazed Wall Sections24 CFR 3280.508(e)
AAMA 1702.21995American Architectural Manufacturers AssociationSwinging Exterior Passage Doors Voluntary Standard for Utilization in Manufactured-Housing24 CFR 3280.405(e)(2)
AAMA 17041985American Architectural Manufacturers AssociationVoluntary Standard Egress Window Systems for Utilization in Manufactured-Housing24 CFR 3280.404(b)
AAMD1973American Association on Mental DeficiencyClassification in Mental Retardation42 CFR 483.102(b)(3)(i)
AAMVA CDLIS.2.01998American Association of Motor Vehicle AdministratorsCommercial Driver License Information System (CDLIS) State Procedures49 CFR 384.231(d)
AASHTO1973American Association of State Highway and Transportation OfficialsStandard Specifications for Highway Bridges24 CFR 200, Subpart S
AASHTO2001American Association of State Highway and Transportation OfficialsA Policy on Geometric Design of Highways and Streets23 CFR 625.4
AASHTO2005American Association of State Highway and Transportation OfficialsA Guide for Accommodating Utilities Within Highway Right-of-Way23 CFR 645.211
AATCC 1181997American Association of Textile Chemists and ColoristsOil Repellency: Hydrocarbon Resistance Test10 CFR 430 Subpart B, App. J1, 2.6.4.5.1
AATCC 1241996American Association of Textile Chemists and ColoristsAppearance of Durable Press Fabrics After Repeated Home Laundering16 CFR 1615.32(a)(1)
ABYC A-011993American Boat and Yacht CouncilMarine Liquified Petroleum Gas Systems46 CFR 184.240(a)
ABYC A-071973American Boat and Yacht CouncilBoat Heating Systems46 CFR 184.200
ABYC A-161997American Boat and Yacht CouncilElectric Navigation Lights46 CFR 25.10-3(a)(2)
ABYC A-221993American Boat and Yacht CouncilMarine Compressed Natural Gas Systems46 CFR 184.240(b)
ABYC E-011973American Boat and Yacht CouncilBonding of Direct Current Systems46 CFR 28.345(b)
ABYC E-091990American Boat and Yacht CouncilDirect Current (DC) Electrical Systems on Boats46 CFR 183.340(b)(4)
ABYC H-021989American Boat and Yacht CouncilVentilation of Boats Using Gasoline46 CFR 28.340(c)
ABYC H-221986American Boat and Yacht CouncilDC Electric Bilge Pumps Operating Under 50 Volts46 CFR 182.500(b)
ABYC H-241993American Boat and Yacht CouncilGasoline Fuel Systems46 CFR 182.455(c)
ABYC H-251994American Boat and Yacht CouncilPortable Gasoline Fuel Systems for Flammable Liquids46 CFR 182.130
ABYC H-321987American Boat and Yacht CouncilVentilation of Boats Using Diesel Fuel46 CFR 182.470(c)
ABYC H-331989American Boat and Yacht CouncilDiesel Fuel Systems46 CFR 182.130
ABYC P-011993American Boat and Yacht CouncilSafe Installation of Exhaust Systems for Propulsion and Auxiliary Engines46 CFR 182.130
ABYC P-041989American Boat and Yacht CouncilMarine Inboard Engines46 CFR 182.420(b)
ACGIH1987American Conference of Governmental Industrial HygienistsGuidelines for the Selection of Chemical Protective Clothing, Third Edition46 CFR 153.933(a)
ACGIH1998American Conference of Governmental Industrial HygienistsIndustrial Ventilation Manual40 CFR 63.2984(e)
ACI 3181995American Concrete InstituteBuilding Code Requirements for Reinforced Concrete30 CFR 250.901(d)(1)
ACI1980American Concrete InstituteManual of Concrete Practice, Part 124 CFR 200, Subpart S
ACRI 210-2402003Air Conditioning and Refrigeration InstituteUnitary Air-Conditioning and Air-Source Heat Pump Equipment10 CFR 431.96
ACRI 310/3802004Air-Conditioning, Heating and Refrigeration InstitutePackaged Terminal Air-Conditioners and Heat Pumps10 CFR 431.96, Table 1
ACRI 3201998Air-Conditioning, Heating, and Refrigeration InstituteWater Source Heat Pumps10 CFR 434.403
ACRI 3251998Air-Conditioning, Heating, and Refrigeration InstituteGround Water-Source Heat Pumps10 CFR 434.403
ACRI 3301998Air-Conditioning, Heating, and Refrigeration InstituteGround-Source Closed-Loop Heat Pumps10 CFR 434.403
ACRI 340-3602004Air Conditioning and Refrigeration InstituteCommercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment10 CFR 434.403
ACRI 3651994Air Conditioning and Refrigeration InstituteCommercial and Industrial Unitary Air-Conditioning Condensing Units10 CFR 434.403
ACRI 12002006Air Conditioning and Refrigeration InstitutePerformance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets10 CFR 431.66(a)(3)
AERA1999American Educational Research AssociationStandard for Educational and Psychological Testing34 CFR 668.148(a)(2)(iv)
AFPA2001American Forest and Paper AssociationNational Design Specification for Wood Construction With Supplemental Design Values for Wood Construction24 CFR 3280.304(b)(1)
AGA 3.11990American Gas AssociationOrifice Metering of Natural Gas and Other Related Hydrocarbon Fluids: Part 140 CFR 75, Appendix D
AGA2001American Gas AssociationPurging Principles and Practices49 CFR 193.2615
AHA A135.41995American Hardboard AssociationBasic Hardboard24 CFR 3280.304(b)(1)
AHA A135.51995American Hardboard AssociationPrefinished Hardboard Paneling24 CFR 3280.304(b)(1)
AHA A135.61998American Hardboard AssociationHardboard Siding24 CFR 3280.304(b)(1)
AHAM DW-11992Association of Home Appliance ManufacturersHousehold Electric Dishwashers10 CFR 430 Subpart B
AHAM HLD-11974Association of Home Appliance ManufacturersPerformance Evaluation Procedure for Household Tumble Type Clothes Dryers10 CFR 430 Subpart B
AHAM HRF-11979Association of Home Appliance ManufacturersHousehold Refrigerators, Combination Refrigerator-Freezers, and Household Freezers10 CFR 430 Subpart B
AHPA1992American Herbal Products AssociationHerbs of Commerce21 CFR 101.4(h)
AI MSI-11970Asphalt InstituteThickness Design--Full Depth Asphalt Pavement Structures for Highways and Streets24 CFR 200, Subpart S
AIHA1994American Industrial Hygiene AssociationLaboratory Ventilation Workbook42 CFR 52b.12(c)(10)
AIMM MS411996Association for Information and Image ManagementDimensions of Unitized Microfilm Carriers and Apertures (Aperture, Camera, Copy and Image Cards)36 CFR 1238.10(a)(1)
AIMM IT2.181996Association for Information and Image ManagementPhotography--Density Measurements--Part 3: Spectral Conditions36 CFR 1238.14(d)(2)
AIMM/PIMA IT9.21998Association for Information and Image ManagementPhotographic Processed Films, Plates, and Papers--Filing Enclosures and Storage Containers36 CFR 1238.10(a)(1)
AIMM/PIMA IT9.111998Association for Information and Image ManagementImaging Materials--Processed Safety Photographic Film--Storage36 CFR 1234.14(b)(1)
AIMM IT9.231996Association for Information and Image ManagementImaging Materials--Polyester Based Magnetic Tape--Storage36 CFR 1234.14(b)(2)
AIMM/PIMA IT9.251998Association for Information and Image ManagementImaging Materials--Optical Disc Media--Storage36 CFR 1234.14(b)(3)
AIMM MS11996Association for Information and Image ManagementRecommended Practice for Alphanumeric Computer-Output Microforms--Operational Practices for Inspection and Quality Control36 CFR 1238.14(c)
AIMM MS51992Association for Information and Image ManagementMicrofiche36 CFR 1238.10(b)
AIMM MS141996Association for Information and Image ManagementSpecifications for 16mm and 35mm Roll Microfilm36 CFR 1238.10(a)(1)
AIMM MS191993Association for Information and Image ManagementStandard Recommended Practice--Identification of Microforms36 CFR 1238.12(c)
AIMM MS231998Association for Information and Image ManagementStandard Recommended Practice--Production, Inspection, and Quality Assurance of First-Generation, Silver Microforms of Documents36 CFR 1238.14(d)(2)
AIMM MS321996Association for Information and Image ManagementMicrorecording of Engineering Source Documents on 35 mm Microfilm36 CFR 1238.10(a)(1)
AIMM MS431998Association for Information and Image ManagementStandard Recommended Practice--Operational Procedures--Inspection and Quality Control of Microfilms and Documents36 CFR 1238.14(d)(1)(i)
AIMM MS451990Association for Information and Image ManagementRecommended Practice for Inspection of Stored Silver-Gelatin Microforms for Evidence of Deterioration36 CFR 1238.22(d)(1)
AIMM TR341996Association for Information and Image ManagementSampling Procedures for Inspection by Attributes of Images in Electronic Image Management and Micrographic Systems36 CFR 1237.28(d)(2)
ALCIDE 980342EA1995Alcide CorporationDetermination of Sodium Chlorite: 50 ppm to 1500 ppm concentration21 CFR 173.325(g)
AMCA 2101999Air Movement and Control AssociationLaboratory Methods of Testing Fans for Ratings10 CFR 430 Subpart B, App. M
J-STD-1022011Alliance for Telecommunications Industry SolutionsJoint ATIS/TIA CMAS Federal Alert Gateway to CMSP Gateway Interface Text SpecificationWarning, Alert and Response Network (WARN) Act of 2006
TELCO FAQ1891American Telephone and TelegraphPractical Information for Telephonists
ANSI A10.31970American National Standards InstituteSafety Requirements for Powder Actuated Fastening Systems29 CFR 1926
ANSI A10.4 (pdf)
ANSI A10.4 (html)
1963American National Standards InstituteSafety Requirements for Workmens Hoists29 CFR 1926
ANSI A10.5 (pdf)
ANSI A10.5 (html)
1969American National Standards InstituteSafety Requirements for Material Joists29 CFR 1926
ANSI A14.1 (pdf)
ANSI A14.1 (html)
ANSI A14.1 (svg)
1990American National Standards InstituteLadders--Wood--Safety Requirements29 CFR 1917
ANSI A14.2 (pdf)
ANSI A14.2 (html)
ANSI A14.2 (svg)
1990American National Standards InstituteLadders--Portable Metal--Safety29 CFR 1917
ANSI A92.2 (pdf)
ANSI A92.2 (html)
1969American National Standards InstituteVehicle Mounted Elevating and Rotating Work Platforms29 CFR 453
ANSI B7.1 (pdf)
ANSI B7.1 (html)
1970American National Standards InstituteSafety Code for the Use, Care, and Protection of Abrasive Wheels29 CFR 1926
ANSI B20.1 (pdf)
ANSI B20.1 (html)
ANSI B20.1 (svg)
1957American National Standards InstituteSafety Code for Conveyors, Cableways, and Related Equipment29 CFR 1926
ANSI B30.6 (pdf)
ANSI B30.6 (html)
ANSI B30.6 (svg)
1969American National Standards InstituteSafety Code for Derricks29 CFR 1926
ANSI B36.191979American National Standards InstituteWelded and Seamless Wrought Steel Pipe24 CFR 3280.705(b)(1)
ANSI B56.1 (pdf)
ANSI B56.1 (html)
ANSI B56.1 (svg)
1969American National Standards InstituteSafety Standard for Powered Industrial Trucks29 CFR 1926
ANSI N14.12001American National Standards InstitutePackaging of Uranium Hexafluoride for Transport49 CFR 173.420(a)(1)
ANSI O1.1 (pdf)
ANSI O1.1 (html)
1961American National Standards InstituteSafety Code for Woodworking Machinery29 CFR 1926
ANSI S1.41983American National Standards InstituteSpecifications for Sound Level Meters7 CFR 1755.522(s)(3)(v)
ANSI S1.112004American National Standards InstituteSpecification for Octave, Half-Octave, and Third Octave Band Filter Sets49 CFR 227
ANSI S1.251991American National Standards InstituteSpecification for Personal Noise Dosimeters49 CFR 227.103(c)(2)(iii)
ANSI S1.401984American National Standards InstituteSpecification for Acoustical Calibrators49 CFR 229, Appendix I
ANSI S1.431997American National Standards InstituteSpecifications for Integrating-Averaging Sound Level Meters49 CFR 227.103(c)(2)(ii)
ANSI S3.22 (pdf)
ANSI S3.22 (html)
2003American National Standards InstituteSpecification of Hearing Aid Characteristics21 CFR 801
ANSI Z35.1 (pdf)
ANSI Z35.1 (html)
ANSI Z35.1 (svg)
1968American National Standards InstituteSpecifications for Accident Prevention Signs29 CFR 1926
ANSI Z35.2 (pdf)
ANSI Z35.2 (html)
ANSI Z35.2 (svg)
1968American National Standards InstituteSpecifications for Accident Prevention Tags29 CFR 1926
ANSI Z49.1 (pdf)
ANSI Z49.1 (html)
1967American National Standards InstituteSafety in Welding and Cutting29 CFR 1926
ANSI Z87.1 (pdf)
ANSI Z87.1 (html)
ANSI Z87.1 (svg)
2003American National Standards InstitutePractice for Occupational and Educational Eye and Face Protection29 CFR 1910
ANSI Z88.2 (pdf)
ANSI Z88.2 (html)
ANSI Z88.2 (svg)
1992American National Standards InstituteAmerican National Standard for Respiratory Protection30 CFR 250
ANSI Z89.1 (pdf)
ANSI Z89.1 (html)
1969American National Standards InstituteSafety Requirements for Industrial Head Protection29 CFR 1926
ANSI Z89.2 (pdf)
ANSI Z89.2 (html)
1971American National Standards InstituteIndustrial Protective Helmets for Electrical Workers29 CFR 1926
ANSI Z90.4 (pdf)
ANSI Z90.4 (html)
1984American National Standards InstituteProtective Headgear for Bicyclists16 CFR 1203
ANSI Z245.1 (pdf)
ANSI Z245.1 (html)
ANSI Z245.1 (svg)
1992American National Standards InstituteMobile Refuse Collection and Compaction--Safety Requirements40 CFR 243
ANSI Z245.2 (pdf)
ANSI Z245.2 (html)
1997American National Standards InstituteStationary Compactors--Safety Requirements40 CFR 243
AOAC1990AOAC InternationalOfficial Methods of Analysis (Volume 1)9 CFR 318.19(b)
AOAC1980AOAC InternationalOfficial Methods of Analysis, 198021 CFR 131.150(c)
APA 87-12001American Pyrotechnics AssociationStandard for Construction and Approval for Transportation of Fireworks and Novelties49 CFR 173.56(j)(1)
APHA Method 2120 (pdf)
APHA Method 2120 (html)
1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 141.121
APHA Method 2130 (pdf)
APHA Method 2130 (html)
1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 141.121
APHA Method 2320 (pdf)
APHA Method 2320 (html)
1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 136.3(a)
APHA Method 2510 (pdf)
APHA Method 2510 (html)
1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 141.121
APHA Method 2550 (pdf)
APHA Method 2550 (html)
1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 141.121
APHA Method 25801992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 141.121
APHA Method 3111 (pdf)
APHA Method 3111 (html)
1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 444.12
APHA Method 3112 (pdf)
APHA Method 3112 (html)
1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 444.12
APHA Method 3113 (pdf)
APHA Method 3113 (html)
1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 444.12
APHA Method 31141992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 444.12
APHA Method 31201992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 444.12
APHA Method 3500-AS1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 444.12
APHA Method 3500-CA (pdf)
APHA Method 3500-CA (html)
1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 136.3(a)
APHA Method 3500-CD (pdf)
APHA Method 3500-CD (html)
1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 444.12
APHA Method 3500-CR1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 63.404(a)
APHA Method 3500-CU1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 444.12
APHA Method 3500-MG (pdf)
APHA Method 3500-MG (html)
1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 136.3(a)
APHA Method 3500-PB (pdf)
APHA Method 3500-PB (html)
1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 444.12
APHA Method 3500-ZN (pdf)
APHA Method 3500-ZN (html)
1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 136.3(a)
APHA Method 4110 (pdf)
APHA Method 4110 (html)
1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 136.3(a)
APHA Method 4500-CIO2 (pdf)
APHA Method 4500-CIO2 (html)
1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater21 CFR 165.110(b)(4)(iii)(I)(7)(ii)
APHA Method 4500-CL1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater21 CFR 165.110(b)(4)
APHA Method 4500-CN1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 136.3(a)
APHA Method 4500-F1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 136.3(a)
APHA Method 4500-H1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 444.12
APHA Method 4500-NO21992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 136.3(a)
APHA Method 4500-NO31992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 136.3(a)
APHA Method 4500-O31992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 136.3(a)
APHA Method 4500-P1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 136.3(a)
APHA Method 4500-S21992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 136.3(a)
APHA Method 4500-SI1992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 141.121
APHA Method 4500-SO421992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 136.3(a)
APHA Method 55401992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 141.121
APHA Method 66511992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 141.121
APHA Method 92151992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 141.121
APHA Method 92211992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 136.3(a)
APHA Method 92221992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 136.3(a)
APHA Method 92231992American Public Health AssociationStandard Methods for the Examination of Water and Wastewater40 CFR 136.3(a)
API 2INT-MET2007American Petroleum InstituteInterim Guidance on Hurricane Conditions in the Gulf of Mexico30 CFR 250.901(a)(6)
API 5L2004American Petroleum InstituteSpecification for Line Pipe49 CFR 192.113
API 5L12002American Petroleum InstituteRecommended Practice for Railroad Transportation of Line Pipe49 CFR 192.65(a)
API 6A2004American Petroleum InstituteSpecification for Wellhead and Christmas Tree Equipment30 CFR 250.806(a)(3)
API 6D2008American Petroleum InstituteSpecification for Pipeline Valves49 CFR 195.116(d)
API 12F1994American Petroleum InstituteSpecification for Shop Welded Tanks for Storage of Production Liquids49 CFR 195.264(b)(1)
API RP 14C2001American Petroleum InstituteRecommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms30 CFR 250.1628(c)
API RP 14F2008American Petroleum InstituteRecommended Practice for Design and Installation of Electrical Systems for Offshore Production Platforms30 CFR 250.114(c)
API 17J2008American Petroleum InstituteSpecification for Unbonded Flexible Pipe30 CFR 250.1002(b)(4)
API 802000American Petroleum InstituteGuidelines for the Definition of Onshore Gas Gathering Lines49 CFR 192.8(a)
API 5102006American Petroleum InstitutePressure Vessel Inspection Code30 CFR 250.803(b)(1)
API 6202002American Petroleum InstituteDesign and Construction of Large Welded Low Pressure Storage Tanks49 CFR 195.264(e)(3)
API 6502007American Petroleum InstituteWelded Steel Tanks for Oil Storage195.132(b)(3)
API 6511997American Petroleum InstituteCathodic Protection of Aboveground Petroleum Storage Tanks49 CFR 195.565
API 6521997American Petroleum InstituteLining of Aboveground Petroleum Storage Tank Bottoms49 CFR 195.579(d)
API 6532003American Petroleum InstituteTank Inspection, Repair, Alteration, and Reconstruction49 CFR 195.432(b)
API 11041999American Petroleum InstituteStandard for Welding Pipelines and Related Facilities49 CFR 195.214(a)
API 11302002American Petroleum InstituteComputational Pipeline Monitoring49 CFR 195.444
API 11622003American Petroleum InstitutePublic Awareness Programs for Pipeline Operators49 CFR 192.616(a)
API 20001998American Petroleum InstituteVenting Atmospheric and Low-Pressure Storage Tanks49 CFR 195.264(e)(2)
API 20031998American Petroleum InstituteProtection Against Ignitions Arising Out of Static, Lightning, and Stray Currents49 CFR 195.405(a)
API 23502005American Petroleum InstituteOverfill Protection for Storage Tanks in Petroleum Facilities49 CFR 195.428(c)
API 25102001American Petroleum InstituteDesign and Construction of LPG Installations49 CFR 195.205(b)(3)
API RP 14G2007American Petroleum InstituteRecommended Practice for Fire Prevention and Control on Open Type Offshore Production Platforms30 CFR 250.803(b)(9)(v)
APLIC1996Avian Power Line Interaction CommitteeSuggested Practices for Raptor Protection on Power Lines: The State of the Art in 19967 CFR 1724.52(a)(1)(i)
APSP 162011Association of Pool and Spa ProfessionalsStandard Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, and Hot Tubs16 CFR 1450.3
ARMA1984Asphalt Roofing Manufacturers AssociationResidential Asphalt Roofing Manual24 CFR 200, Subpart S
ASHRAE 151994American Society of Heating, Refrigerating and Air Conditioning EngineersSafety Code for Mechanical Refrigeration49 CFR 173.306(e)(1)(i)
ASHRAE1993American Society of Heating, Refrigerating and Air Conditioning EngineersFundamentals10 CFR 434.402.2.2.5(a)
ASME B16.92003American Society of Mechnical EngineersFactory Made Wrought Steel Buttwelding Fittings49 CFR 195.118(a)
ASME B30.2 (pdf)
ASME B30.2 (html)
ASME B30.2 (svg)
2005American Society of Mechanical EngineersSafety Requirements for Overhead and Gantry Cranes29 CFR 1926
ASME B30.5 (pdf)
ASME B30.5 (html)
2004American Society of Mechanical EngineersSafety Requirements for Mobile and Locomotive Cranes29 CFR 1926
ASME B30.7 (pdf)
ASME B30.7 (html)
2001American Society of Mechanical EngineersSafety Requirements for Base-Mounted Drum Hoists29 CFR 1926
ASME B30.14 (pdf)
ASME B30.14 (html)
ASME B30.14 (svg)
2004American Society of Mechanical EngineersSafety Requirements for Side Boom Tractors29 CFR 1926
ASME B31.42002American Society of Mechnical EngineersPipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids49 CFR 195.110(a)
ASME B31.82003American Society of Mechnical EngineersGas Transmission and Distribution Piping Systems49 CFR 192.619(a)(1)(i)
ASME B318S2004American Society of Mechanical EngineersManaging System Integrity of Gas Pipelines49 CFR 192.903(c)
ASME B31G1991American Society of Mechanical EngineersManual for Determining the Remaining Strength of Corroded Pipelines49 CFR 192.485(c)
ASME UPV1943American Society of Mechanical EngineersCode for Unfired Pressure Vessels49 CFR 173.32(c)(4)
ASQC Q90011994American Society for Quality ControlQuality Assurance in Design, Development, Production, Installation, and Servicing33 CFR 96.430(a)(2)(ii)
ASQC Q90021994American Society for Quality ControlQuality Systems -- Model for Quality Assurance in Production, Installation, and Servicing24 CFR 200.935(d)(4)(ii)(A)(3)
ASQC Q90031994American Society for Quality ControlQuality Systems - Model for Quality Assurance in Final Inspection and Test24 CFR 200.935(d)(4)(ii)(A)(4)
ASQC Q9004-11994American Society for Quality ControlQuality Management and Quality Systems Elements-Guidelines24 CFR 200.935(d)(4)(ii)(A)(5)
ASSE 10011990American Society of Sanitary EngineeringPerformance Requirements for Pipe Applied Atmospheric Type Vacuum Breakers24 CFR 3280.604(b)(2)
ASSE 1006 (pdf)
ASSE 1006 (html)
1986American Society of Sanitary EngineeringPlumbing Requirements for Residential Use (Household) Dishwashers24 CFR 3280.604(b)(2)
ASSE 1007 (pdf)
ASSE 1007 (html)
1986American Society of Sanitary EngineeringPerformance Requirements for Home Laundry Equipment24 CFR 3280.604(b)(2)
ASSE 1008 (pdf)
ASSE 1008 (html)
1986American Society of Sanitary EngineeringPerformance Requirements for Household Food Waste Disposer Units24 CFR 3280.604(b)(2)
ASSE 10161988American Society of Sanitary EngineeringPerformance Requirements for Individual Thermostatic Pressure Balancing and Combination Control for Bathing Facilities24 CFR 3280.604(b)(2)
ASSE 1023 (pdf)
ASSE 1023 (html)
1979American Society of Sanitary EngineeringHot Water Dispensers, Household Storage Type, Electrical24 CFR 3280.604(b)(2)
ASSE 10251978American Society of Sanitary EngineeringDiverters for Plumbing Faucets with Hose Spray, Anti-Siphon Type, Residential Applications24 CFR 3280.604(b)(2)
ASSE 1037 (pdf)
ASSE 1037 (html)
1990American Society of Sanitary EngineeringPerformance Requirements for Pressurized Flushing Devices (Flushometers) for Plumbing Fixtures24 CFR 3280.604(b)(2)
ASCE 72002American Society of Civil EngineersMinimum Design Loads for Buildings and Other Structures49 CFR 193.2013
ASTM A361977American Society for Testing and MaterialsStandard Specification for Carbon Structural Steel24 CFR Part 200
ASTM A361997American Society for Testing and MaterialsStandard Specification for Carbon Structural Steel46 CFR 160.035-3(b)(2)
ASTM A471968American Society for Testing and MaterialsStandard Specification for Malleable Iron Castings29 CFR 1910.111(b)(7)(vi)
ASTM A821979American Society for Testing and MaterialsCold-Drawn Steel Wire for Concrete Reinforcement24 CFR 200, Subpart S
ASTM A1001969American Society for Testing and MaterialsStandard Specification for Ferrosilicon40 CFR 60.261(s)
ASTM A1062004American Society for Testing and MaterialsStandard Specification for Seamless Carbon Steel Pipe for High-Temperature Service49 CFR 192.113
ASTM A1341996American Society for Testing and MaterialsStandard Specification for Pipe, Steel, Electric Fusion (Arc)-Welded (Sizes NPS 16 and Over)46 CFR 56.60-1(b)
ASTM A1791990American Society for Testing and MaterialsStandard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes46 CFR 56.60-1(b)
ASTM A1841979American Society for Testing and MaterialsStandard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement24 CFR 200, Subpart S
ASTM A1851979American Society for Testing and MaterialsSteel Wire Fabric for Concrete Reinforcement24 CFR 200, Subpart S
ASTM A2031997American Society for Testing and MaterialsStandard Specification for Pressure Vessel Plates, Alloy Steel, Nickel46 CFR 54.05-20(b)
ASTM A2141996American Society for Testing and MaterialsStandard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes46 CFR 56.60-1(b)
ASTM A2421979American Society for Testing and MaterialsStandard Specification for High-Strength Low-Alloy Structural Steel24 CFR 200, Subpart S
ASTM A2851978American Society for Testing and MaterialsStandard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength49 CFR 179.300-7(a)
ASTM A3071978American Society for Testing and MaterialsCarbon Steel Bolts and Studs, 60,000 PSI Tensile Strength46 CFR 56.25-20(b)
ASTM A3251979American Society for Testing and MaterialsHigh-Strength Bolts for Structural Steel Joists24 CFR 200, Subpart S
ASTM A3331994American Society for Testing and MaterialsStandard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service46 CFR 56.50-105
ASTM A3691992American Society for Testing and MaterialsStandard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service46 CFR 56.60-1(b)
ASTM A3701977American Society for Testing and MaterialsStandard Test Method and Definitions for Mechanical Testing of Steel Products49 CFR 179.102-1(a)(1)
ASTM A3811996American Society for Testing and MaterialsStandard Specification for Metal-Arc-Welded Steel Pipe for Use with High-Pressure Transmission Systems49 CFR 192.113
ASTM A3911965American Society for Testing and MaterialsStandard Specification for Alloy Steel Chain29 CFR 1910.184(e)(4)
ASTM A4161974American Society for Testing and MaterialsUncoated Seven-Wire Stress-Relieved Strand for Prestressed Concrete24 CFR 200, Subpart S
ASTM A4411979American Society for Testing and MaterialsHigh-Strength Low-Alloy Structural Manganese Vanadium Steel24 CFR 200, Subpart S
ASTM A4491978American Society for Testing and MaterialsQuenched and Tempered Steel Bolts and Studs24 CFR 200, Subpart S
ASTM A4751978American Society for Testing and MaterialsStandard Specification for Zinc-Coated Steel Wire Strand7 CFR 1755.370(b)
ASTM A4831964American Society for Testing and MaterialsStandard Specification for Silicomanganese40 CFR 60.261(o)
ASTM A4901979American Society for Testing and MaterialsQuenched and Tempered Alloy Steel Bolts for Structural Steel Joints24 CFR 200, Subpart S
ASTM A4961978American Society for Testing and MaterialsDeformed Steel Wire for Concrete Reinforcement24 CFR 200, Subpart S
ASTM A4971979American Society for Testing and MaterialsWelded Deformed Steel Wire, Fabric for Concrete Reinforcement24 CFR 200, Subpart S
ASTM A5001978American Society for Testing and MaterialsCold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes24 CFR 200, Subpart S
ASTM A5011976American Society for Testing and MaterialsHot-Formed Welded and Seamless Carbon Steel Structural Tubing24 CFR 200, Subpart S
ASTM A5021976American Society for Testing and MaterialsSteel Structural Rivets24 CFR 200, Subpart S
ASTM A5141977American Society for Testing and MaterialsHigh-Yield Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding24 CFR 200, Subpart S
ASTM A5161990American Society for Testing and MaterialsStandard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service49 CFR 178.337-2(b)(2)(i)
ASTM A5221995American Society for Testing and MaterialsForged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service46 CFR 56.50-105
ASTM A5291972American Society for Testing and MaterialsStructural Steel with 42,000PSI (290 Mpa) Minimum Yield Point (1/2 in (12.7 mm) Maximum Thickness24 CFR 200, Subpart S
ASTM A5291975American Society for Testing and MaterialsStructural Steel with 42,000PSI (290 Mpa) Minimum Yield Point (1/2 in (12.7 mm) Maximum Thickness24 CFR 200, Subpart S
ASTM A5391990American Society for Testing and MaterialsStandard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines24 CFR 3280.705(b)(4)
ASTM A5701979American Society for Testing and MaterialsHot-Rolled Carbon Steel Sheet and Strip, Structural Quality24 CFR 200, Subpart S
ASTM A5721979American Society for Testing and MaterialsHigh-Strength Low-Alloy Columbium-Vanadium Steels of Structural Quality24 CFR 200, Subpart S
ASTM A5881979American Society for Testing and MaterialsHigh-Strength Low-Alloy Structural Steel with 50 ksi Minimum Yield Point to 4 inches Thick24 CFR 200, Subpart S
ASTM A6111972American Society for Testing and MaterialsSteel, Cold-rolled Sheet, Carbon, Structural24 CFR 200, Subpart S
ASTM A6151979American Society for Testing and MaterialsDeformed and Plain Billet-Steel Bars for Concrete Reinforcement24 CFR 200, Subpart S
ASTM A6161979American Society for Testing and MaterialsRail-Steel Deformed and Plain Bars for Concrete Reinforcement24 CFR 200, Subpart S
ASTM A6171979American Society for Testing and MaterialsAxle-Steel Deformed and Plain Bars for Concrete Reinforcement24 CFR 200, Subpart S
ASTM A6181974American Society for Testing and MaterialsHot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing24 CFR 200, Subpart S
ASTM A6331979American Society for Testing and MaterialsStandard Specification for Normalized High-Strength Low Alloy Structural Steel49 CFR 178.338-2(a)
ASTM A6712004American Society for Testing and MaterialsStandard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures49 CFR 192.113
ASTM A6721996American Society for Testing and MaterialsStandard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures49 CFR 192.113
ASTM A6911998American Society for Testing and MaterialsStandard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperature49 CFR 192.113
ASTM B161985American Society for Testing and MaterialsStandard Specification for Free-Cutting Brass Rod, Bar, and Shapes for Use in Screw Machines46 CFR 56.60-2
ASTM B161992American Society for Testing and MaterialsStandard Specification for Free-Cutting Brass Rod, Bar, and Shapes for Use in Screw Machines46 CFR 56.60-2
ASTM B211983American Society for Testing and MaterialsStandard Specification for Naval Brass Rod, Bar, and Shapes46 CFR 56.60-2
ASTM B211996American Society for Testing and MaterialsStandard Specification for Naval Brass Rod, Bar, and Shapes46 CFR 56.60-2
ASTM B421996American Society for Testing and MaterialsStandard Specification for Seamless Copper Pipe, Standard Sizes46 CFR 56.60-1(b)
ASTM B681995American Society for Testing and MaterialsStandard Specification for Seamless Copper Tube, Bright Annealed46 CFR 56.60-1(b)
ASTM B751997American Society for Testing and MaterialsStandard Specification for Seamless Copper Tube46 CFR 56.60-1(b)
ASTM B851984American Society for Testing and MaterialsStandard Specification for Aluminum-Alloy Die Castings46 CFR 56.60-2
ASTM B881996American Society for Testing and MaterialsStandard Specification for Seamless Copper Water Tube46 CFR 56.60-1(b)
ASTM B961993American Society for Testing and MaterialsStandard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Bolled Bar for General Purposes and Pressure Vessels46 CFR 119.440
ASTM B1111995American Society for Testing and MaterialsCopper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock46 CFR 56.60-1(b)
ASTM B1171973American Society for Testing and MaterialsStandard Practice for Operating Salt Spray (Fog) Apparatus49 CFR 571.209 S5.2(a)
ASTM B1221995American Society for Testing and MaterialsStandard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip and Rolled Bar46 CFR 119.440
ASTM B1241996American Society for Testing and MaterialsStandard Specification for Copper and Copper-Alloy Forging Rod, Bar, and Shapes46 CFR 56.60-2
ASTM B1521997American Society for Testing and MaterialsStandard Specification for Copper, Sheet, Strip, Plate, and Rolled Bar46 CFR 58.50-5(a)(4)
ASTM B1931987American Society for Testing and MaterialsStandard Test Method for Resistivity of Electrical Conductor Materials7 CFR 1755.390(i)(5)(v)(A)
ASTM B2091996American Society for Testing and MaterialsStandard Specification for Aluminum and Aluminum Alloy Sheet and Plate46 CFR 58.50-5, Table 58.50-5(a)
ASTM B2241980American Society for Testing and MaterialsStandard Classification of Coppers7 CFR 1755.890(i)(5)(vi)
ASTM B2271970American Society for Testing and MaterialsHard-Drawn Copper-Clad Steel Wire24 CFR 200, Subpart S
ASTM B2801997American Society for Testing and MaterialsSeamless Copper Tube for Air Conditioning and Refrigeration Field Service46 CFR 56.60-1(b)
ASTM B2831996American Society for Testing and MaterialsStandard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)46 CFR 56.60-2
ASTM B3151993American Society for Testing and MaterialsSeamless Copper Alloy Pipe Tube46 CFR 56.60-1(b)
ASTM B5571984American Society for Testing and MaterialsTension Testing Wrought and Cast Aluminum and Magnesium-Alloy Products49 CFR 178.46(i)(3)(i)
ASTM B5801979American Society for Testing and MaterialsStandard Specification for Anodized Oxide Coatings on Aluminum49 CFR 171.7
ASTM B6941986American Society for Testing and MaterialsStandard Specification for Copper, Copper Alloy, and Copper-Clad Stainless Steel Sheet and Strip for Electrical Cable Shielding7 CFR 1755.390(i)(5)(v)
ASTM B8581995American Society for Testing and MaterialsStandard Test Method for Determination of Susceptibility to Stress Corrosion Cracking in Copper Alloys Using Ammonia Vapor Test46 CFR 56.60-2
ASTM C41962American Society for Testing and MaterialsStandard Specification for Clay Drain Tile and Perforated Clay Drain Tile24 CFR 200, Subpart S
ASTM C51979American Society for Testing and MaterialsStandard Specification for Quicklime for Structural Purposes24 CFR 200, Subpart S
ASTM C321973American Society for Testing and MaterialsStandard Specification for Sewer and Manhole Brick24 CFR 200, Subpart S
ASTM C341962American Society for Testing and MaterialsStandard Specification for Structural Clay Load-Bearing Wall Tile24 CFR 200, Subpart S
ASTM C521954American Society for Testing and MaterialsSpecification for Gypsum Partition Tile or Block24 CFR 200, Subpart S
ASTM C561971American Society for Testing and MaterialsStandard Specification for Structural Clay Nonloadbearing Tile24 CFR 200, Subpart S
ASTM C641972American Society for Testing and MaterialsSpecification for Fireclay Brick Refractories for Heavy Duty Stationary Boiler Service24 CFR 200, Subpart S
ASTM C901970American Society for Testing and MaterialsStandard Specification for Hollow Load-Bearing Concrete Masonry Units49 CFR 223 Appendix A (b)(10)(ii)
ASTM C1261971American Society for Testing and MaterialsStandard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units24 CFR 200, Subpart S
ASTM C1391973American Society for Testing and MaterialsStandard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes24 CFR 200, Subpart S
ASTM C1501917American Society for Testing and MaterialsStandard Specification for Portland Cement49 CFR 571.108
ASTM C1501999American Society for Testing and MaterialsStandard Specification for Portland Cement30 CFR 250.198
ASTM C1502007American Society for Testing and MaterialsStandard Specification for Portland Cement30 CFR 250.901(d)(9)
ASTM C1771997American Society for Testing and MaterialsStandard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded Hot-Plate Apparatus10 CFR 431.102
ASTM C177 (pdf)
ASTM C177 (html)
2004American Society for Testing and MaterialsStandard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded Hot-Plate Apparatus16 CFR 460.5(a)
ASTM C2361989American Society for Testing and MaterialsStandard Test Method for Steady-State Thermal Performance of Building Assemblies by Means of a Guarded Hot Box10 CFR 434.402.1.2.1(a)
ASTM C3301999American Society for Testing and MaterialsStandard Specification for Lightweight Aggregates for Structural Concrete30 CFR 250.901(a)(18)
ASTM C4761971American Society for Testing and MaterialsStandard Specification for Grout for Masonry24 CFR 200, Subpart S
ASTM C5091984American Society for Testing and MaterialsStandard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material24 CFR 200, Subpart S
ASTM C5161980American Society for Testing and MaterialsStandard Specification for Vermiculite Loose Fill Thermal Insulation24 CFR 200, Subpart S
ASTM C5181991American Society for Testing and MaterialsStandard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus46 CFR 160.174-17(f)
ASTM C5182004American Society for Testing and MaterialsStandard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus16 CFR 460.5(a)
ASTM C5491981American Society for Testing and MaterialsStandard Specification for Perlite Loose Fill Insulation10 CFR 440 Appendix A
ASTM C5641970American Society for Testing and MaterialsStandard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings24 CFR 3280.611(d)(5)(iv)
ASTM C7201989American Society for Testing and MaterialsSpray Applied Fibrous Insulation for Elevated Temperature10 CFR 440 Appendix A
ASTM C10452001American Society for Testing and MaterialsStandard Practice for Calculating Thermal Transmission Properties from Steady-State Heat Flux Measurements16 CFR 460.5(a)
ASTM C11142000American Society for Testing and MaterialsStandard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus16 CFR 460.5(a)
ASTM C11492002American Society for Testing and MaterialsStandard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation16 CFR 460.5(a)(4)
ASTM C12242003American Society for Testing and MaterialsStandard Specification for Reflective Insulation for Building Applications16 CFR 460.5(c)
ASTM C13712004American Society for Testing and MaterialsStandard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers16 CFR 460.5(b)
ASTM C13742003American Society for Testing and MaterialsStandard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation16 CFR 460.5(a)(5)
ASTM D561970American Society for Testing and MaterialsStandard Test Method for Flash Point by Tag Closed Cup Tester29 CFR 1910.106(a)(14)(i)
ASTM D862001American Society for Testing and MaterialsStandard Test Method for Distillation of Petroleum Products at Atmospheric Pressure40 CFR 94.108(a)(1) Table B-5
ASTM D862004American Society for Testing and MaterialsStandard Test Method for Distillation of Petroleum Products at Atmospheric Pressure40 CFR 1065.710
ASTM D86 (pdf)
ASTM D86 (html)
2007American Society for Testing and MaterialsStandard Test Method for Distillation of Petroleum Products at Atmospheric Pressure40 CFR 1065.710
ASTM D881956American Society for Testing and MaterialsStandard Test Method for Saybolt Viscosity29 CFR 1910.106(a)(37)
ASTM D932002American Society for Testing and MaterialsStandard Test Method for Flash Point by Pensky-Martens Closed Cup Tester40 CFR 94.108(a)(1) Table B-5
ASTM D1291964American Society for Testing and MaterialsStandard Test Method for Sulfur in Petroleum Products (General Bomb Method)40 CFR 60.106(j)(2)
ASTM D1291995American Society for Testing and MaterialsStandard Test Method for Sulfur in Petroleum Products (General Bomb Method)40 CFR 60.106(j)(2)
ASTM D129 (pdf)
ASTM D129 (html)
2000American Society for Testing and MaterialsStandard Test Method for Sulfur in Petroleum Products (General Bomb Method)40 CFR 60.335(b)(10)(i)
ASTM D2571991American Society for Testing and MaterialsStandard Test Method for DC Resistance of Conductance of Insulating Materials7 CFR 1755.860(e)(5)
ASTM D2871992American Society for Testing and MaterialsStandard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)40 CFR 94.108(a)(1) Table B-5
ASTM D3231958American Society for Testing and MaterialsStandard Test Method for Vapor Pressure of Petroleum Products (Reid Method)29 CFR 1910.106(a)(30)
ASTM D3881998American Society for Testing and MaterialsStandard Classification of Coals by Rank40 CFR 60.251(b)
ASTM D3961998American Society for Testing and MaterialsStandard Specification for Fuel Oils40 CFR 60.41b
ASTM D396 (pdf)
ASTM D396 (html)
2002American Society for Testing and MaterialsStandard Specification for Fuel Oils40 CFR 63.7575
ASTM D4121968American Society for Testing and MaterialsStandard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension21 CFR 801.410(d)(2)
ASTM D4131982American Society for Testing and MaterialsStandard Test Method for Rubber Property--Adhesion to Flexible Substrate46 CFR 160.055-3 Table 160-055-3(j)
ASTM D4451965American Society for Testing and MaterialsStandard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids29 CFR 1910.106(a)(37)
ASTM D4451972American Society for Testing and MaterialsStandard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids21 CFR 177.1430(c)(2)
ASTM D5121989American Society for Testing and MaterialsStandard Test Methods for Chloride Ion In Water40 CFR 136.3(a)
ASTM D6111982American Society for Testing and MaterialsStandard Test Method for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents21 CFR 177.1520(b)
ASTM D6601944American Society for Testing and MaterialsEvaluating Degree of Resistant to Checking of Exterior Paints24 CFR 200, Subpart S
ASTM D6651998American Society for Testing and MaterialsStandard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water46 CFR 61.20-17(a)
ASTM D7501968American Society for Testing and MaterialsRecommended Practice for Rubber Deterioration in Carbon-Arc or Weathering Apparatus24 CFR 200, Subpart S
ASTM D7561956American Society for Testing and MaterialsStandard Practice for Determination of Weight and Shape Changes of Plastics Under Accelerated Service Conditions49 CFR 571.209 S5.2(b)
ASTM D7811968American Society for Testing and MaterialsStandard Test Methods for Puncture and Stiffness of Paperboard and Corrugated and Solid Fiberboard24 CFR 3280.304(b)(1)
ASTM D7851965American Society for Testing and MaterialsStandard Method of Test for Rockwell Hardness of Plastics and Electrical Insulating Materials16 CFR 1201.4
ASTM D8141995American Society for Testing and MaterialsStandard Test Method for Rubber Property--Vapor Transmission of Volatile Liquids40 CFR 1051.245(e)(1)
ASTM D9751998American Society for Testing and MaterialsStandard Specification for Diesel Fuel Oils46 CFR 160.176-13(r)
ASTM D975 (pdf)
ASTM D975 (html)
2007American Society for Testing and MaterialsStandard Specification for Diesel Fuel Oils40 CFR 1065.701
ASTM D9761991American Society for Testing and MaterialsStandard Test Method for Calculated Cetane Index of Distillate Fuels40 CFR 92.113
ASTM D10561973American Society for Testing and MaterialsStandard Specification for Flexible Cellular Materials Sponge or Expanded Rubber49 CFR 571.213
ASTM D10601965American Society for Testing and MaterialsStandard Method of Core Sampling of Raw Wool Packages for Determination of Percentage of Clean Wool Fiber Present7 CFR 31.204
ASTM D10672002American Society for Testing and MaterialsStandard Test Method for Acidity or Alkalinity of Water40 CFR 141.21
ASTM D10682003American Society for Testing and MaterialsStandard Test Methods for Iron in Water40 CFR 136.3(a)
ASTM D10721990American Society for Testing and MaterialsStandard Test Method for Total Sulfur in Fuel Gases40 CFR 60.335(b)(10)(ii)
ASTM D10811960American Society for Testing and MaterialsTest for Evaluating Rubber Property--Sealing Pressure24 CFR 200, Subpart S
ASTM D1126 (pdf)
ASTM D1126 (html)
ASTM D1126 (svg)
2002American Society for Testing and MaterialsStandard Test Method for Hardness in Water40 CFR 136
ASTM D11931977American Society for Testing and MaterialsStandard Specification for Reagent Water40 CFR 60, Appendix A-3
ASTM D12001970American Society for Testing and MaterialsViscosity of Paints, Varnishes and Lacquers by Ford Viscosity Cup49 CFR 171.8
ASTM D12171993American Society for Testing and MaterialsStandard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer40 CFR 75, Appendix D
ASTM D12461995American Society for Testing and MaterialsBromide - Titrimetric40 CFR 136.3(a) Table IB
ASTM D12531986American Society for Testing and MaterialsStandard Test Method for Residual Chlorine in Water21 CFR 165.110(b)(4)(iii)(I)(5)(i)
ASTM D1253 (pdf)
ASTM D1253 (html)
2003American Society for Testing and MaterialsStandard Test Method for Residual Chlorine in Water40 CFR 136.3(a) Table IB
ASTM D12661998American Society for Testing and MaterialsStandard Test Method for Sulfur in Petroleum Products (Lamp Method)40 CFR 60.106(j)(2)
ASTM D12981999American Society for Testing and MaterialsStandard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products40 CFR 75, Appendix D, Section 2.2.6
ASTM D13031955American Society for Testing and MaterialsStandard Method of Test for Total Chlorine in Vinyl Chloride Polymers and Copolymers21 CFR 177.1610(a)
ASTM D1319 (pdf)
ASTM D1319 (html)
2003American Society for Testing and MaterialsStandard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption40 CFR 80.2(z)
ASTM D13311989American Society for Testing and MaterialsStandard Test Methods for Surface and Interfacial Tension of Solutions of Surface Active Agents40 CFR 63, Appendix A
ASTM D13351967American Society for Testing and MaterialsStandard Test Method for Tuft Bind of Pile Floor Coverings24 CFR 200.945(a)(1)(ii)
ASTM D14121993American Society for Testing and MaterialsStandard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30 Degrees Celsius30 CFR 870.19
ASTM D14151968American Society for Testing and MaterialsTentative Method of Test for International Hardness of Vulcanized Natural and Synthetic Rubbers49 CFR 571.116 S7.4.1(b)
ASTM D14151988American Society for Testing and MaterialsStandard Practice for Rubber and Rubber Latices--Nomenclature21 CFR 177.2600(c)(4)(i)
ASTM D14751960American Society for Testing and MaterialsStandard Test Method for Density of Paint, Varnish, Lacquer, and Related Products40 CFR 60, Appendix A-7
ASTM D14801993American Society for Testing and MaterialsStandard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer40 CFR 75, Appendix D
ASTM D14811993American Society for Testing and MaterialsStandard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer40 CFR 136.3(a) Table IC
ASTM D15051968American Society for Testing and MaterialsStandard Test Method for Density of Plastics by the Density-Gradient Technique21 CFR 177.2480
ASTM D15181985American Society for Testing and MaterialsStandard Test Method for Thermal Transmittance of Textile Materials46 CFR 160.174-17(f)
ASTM D15351968American Society for Testing and MaterialsSpecifying Color by the Munsell System16 CFR 1402
ASTM D15351968American Society for Testing and MaterialsSpecifying Color by the Munsell System16 CFR 1402.4(a)(1)(i)(E)(2)
ASTM D15351989American Society for Testing and MaterialsSpecifying Color by the Munsell System7 CFR 1755.860(c)(3)
ASTM D15521995American Society for Testing and MaterialsStandard Test Method for Sulfur in Petroleum Products (High-Temperature Method)40 CFR 60, Appendix A-7
ASTM D15641971American Society for Testing and MaterialsStandard Method of Testing Flexible Cellular Materials--Slab Urethane Foam40 CFR 136.3(a)
ASTM D16871992American Society for Testing and MaterialsStandard Test Methods for Chromium in Water40 CFR 444.12(b)(1)
ASTM D16881995American Society for Testing and MaterialsStandard Test Method for Copper in Water40 CFR 141.23(k)(1)
ASTM D16921968American Society for Testing and MaterialsTest for Flammability of Plastic Sheeting and Cellular Plastics29 CFR 1910.103(c)(1)(v)(D)
ASTM D17851986American Society for Testing and MaterialsStandard Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe, Schedules 40, 80, and 12046 CFR 56.01-2
ASTM D18351997American Society for Testing and MaterialsStandard Specification for Liquefied Petroleum (LP) Gases49 CFR 180.209(e)
ASTM D18901996American Society for Testing and MaterialsStandard Test Method for Beta Particle Radioactivity of Water40 CFR 136.3(a)
ASTM D19431996American Society for Testing and MaterialsStandard Test Method for Alpha Particle Radioactivity of Water40 CFR 136.3(a)
ASTM D19451996American Society for Testing and MaterialsStandard Test Method for Analysis of Natural Gas By Gas Chromatography40 CFR 60.45(f)(5)(i)
ASTM D19461990American Society for Testing and MaterialsStandard Method for Analysis of Reformed Gas by Gas Chromatography40 CFR 60.614(e)(4)
ASTM D19621967American Society for Testing and MaterialsStandard Test Method for Saponification Value of Drying Oils, Fatty Acids, and Polymerized Fatty Acids21 CFR 178.2010(b)
ASTM D20131986American Society for Testing and MaterialsStandard Method of Preparing Coal Samples for Analysis40 CFR 60, Appendix A-7
ASTM D20151996American Society for Testing and MaterialsStandard Test Method for Gross Calorific Value of Solid Fuel by the Adiabatic Bomb Calorimeter40 CFR 60.45(f)(5)(ii)
ASTM D20361998American Society for Testing and MaterialsStandard Test Method for Cyanides in Water40 CFR 136.3(a) Table IB
ASTM D20992000American Society for Testing and MaterialsStandard Test Method for Dynamic Water Resistance of Shoe Upper Maeser Water Penetration Tester40 CFR 63.5350(b)
ASTM D21561965American Society for Testing and MaterialsMethod of Tests for Smoke Density in Flue Gases from Distillate Fuels10 CFR 430 Subpart B
ASTM D21611966American Society for Testing and MaterialsStandard Method of Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity29 CFR 1910.106(a)(37)
ASTM D21631991American Society for Testing and MaterialsStandard Test Method for Analysis of Liquefied Petroleum (LP) Gases and Propane Concentrates by Gas Chromatography40 CFR 86.1313-94(f)(3)
ASTM D22161998American Society for Testing and MaterialsStandard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass40 CFR 258.41(a)(4)(iii)(A)
ASTM D22341998American Society for Testing and MaterialsStandard Practice for Collection of a Gross Sample of Coal40 CFR 60, Appendix A-7
ASTM D22361970American Society for Testing and MaterialsStandard Method of Test for Dynamic Mechanical Properties of Plastics by Means of a Torsional Pendulum21 CFR 177.1810(c)(2)(i)
ASTM D22471968American Society for Testing and MaterialsStandard Practice for Testing Water Resistance of Coatings in 100 Percent Relative Humidity24 CFR 200, Subpart S
ASTM D22671968American Society for Testing and MaterialsStandard Test Method for Aromatics in Light Naphthas and Aviation Gasoline by Gas Chromatography40 CFR 61.67(h)(1)
ASTM D24601997American Society for Testing and MaterialsStandard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water40 CFR 136.3(a) Table IE
ASTM D25021992American Society for Testing and MaterialsStandard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils from Viscosity Measurements40 CFR 75, Appendix G
ASTM D25031992American Society for Testing and MaterialsStandard Method of Test for Molecular Weight of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure40 CFR 98.254
ASTM D25051988American Society for Testing and MaterialsStandard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography40 CFR 98.7
ASTM D25151966American Society for Testing and MaterialsStandard Specification for Kinematic Glass Viscosity49 CFR 571.116 S6.3.2(a)
ASTM D25651970American Society for Testing and MaterialsStandard Practice for Operating Xenon Arc-Type Light-Exposure Apparatus With or Without Water for Exposure of Plastics16 CFR 1201.4(b)(3)(ii)
ASTM D25971994American Society for Testing and MaterialsStandard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography40 CFR 60.335(b)(9)(i)
ASTM D26221998American Society for Testing and MaterialsStandard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry40 CFR 80.46(a)(1)
ASTM D27241987American Society for Testing and MaterialsStandard Test Method for Bonded, Fused, and Laminated Apparel Fabrics49 CFR 238 Appendix B(a)(1)(ii)
ASTM D27771998American Society for Testing and MaterialsStandard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D-19 on Water46 CFR 162.050-15(f)(1)
ASTM D28571970American Society for Testing and MaterialsStandard Method of Test for Dilute Solution Viscosity of Polymers21 CFR 177.2210(b)(3)
ASTM D28791997American Society for Testing and MaterialsStandard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope40 CFR 60.116b(e)(3)(ii)
ASTM D29081974American Society for Testing and MaterialsStandard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography40 CFR 60.564(j)(1)
ASTM D29081991American Society for Testing and MaterialsStandard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography40 CFR 60.564(j)(1)
ASTM D29861995American Society for Testing and MaterialsStandard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test40 CFR 86.1310-2007(b)(7)(i)(A)
ASTM D31201996American Society for Testing and MaterialsStandard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry40 CFR 80.46(a)(3)(iii)
ASTM D31681973American Society for Testing and MaterialsStandard Recommended Practices for Qualitative Identification of Polymers in Emulsion Paints21 CFR 200.946
ASTM D31731987American Society for Testing and MaterialsStandard Test Method for Moisture in the Analysis Sample of Coal and Coke40 CFR 60, Appendix A-7
ASTM D31761989American Society for Testing and MaterialsStandard Practice for Ultimate Analysis of Coal and Coke40 CFR 76.15(a)(1)
ASTM D31771989American Society for Testing and MaterialsStandard Test Method for Total Sulfur in the Analysis Sample of Coal and Coke40 CFR 60, Appendix A-7
ASTM D31781989American Society for Testing and MaterialsStandard Test Method for Carbon and Hydrogen in the Analysis Sample of Coal and Coke40 CFR 60.45(f)(5)(i)
ASTM D32361988American Society for Testing and MaterialsStandard Test Method for Apparent Viscosity of Hot Metal Adhesives and Coating Materials21 CFR 177.1520(b)
ASTM D32461996American Society for Testing and MaterialsStandard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry40 CFR 60.335(b)(10)(ii)
ASTM D32861996American Society for Testing and MaterialsStandard Test Method for Gross Calorific Value of Coal and Coke by the Isoperibol Bomb Calorimeter40 CFR 60.17
ASTM D33711995American Society for Testing and MaterialsStandard Test Method for Nitriles in Aqueous Solution by Gas-Liquid Chromatography40 CFR 136.3(a) Table IF
ASTM D34541997American Society for Testing and MaterialsStandard Test Method for Radium-226 in Water40 CFR 136.3(a) Table IE
ASTM D3559 (pdf)
ASTM D3559 (html)
2003American Society for Testing and MaterialsStandard Test Methods for Lead in Water40 CFR 136
ASTM D35881998American Society for Testing and MaterialsStandard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density (Specific Gravity) of Gaseous Fuels40 CFR 75, Appendix F
ASTM D36951995American Society for Testing and MaterialsStandard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography40 CFR 136.3(a) Table IF
ASTM D36971992American Society for Testing and MaterialsStandard Test Method for Antimony in Water21 CFR 165.110(b)(4)(iii)(E)(1)(iv)
ASTM D40571995American Society for Testing and MaterialsStandard Practice for Manual Sampling of Petroleum and Petroleum Products40 CFR 80.8(a)
ASTM D40841994American Society for Testing and MaterialsStandard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)40 CFR 60.334(h)(1)
ASTM D41771995American Society for Testing and MaterialsStandard Practice for Automatic Sampling of Petroleum and Petroleum Products40 CFR 80.330(b)(2)
ASTM D42391997American Society for Testing and MaterialsStandard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods40 CFR 60, Appendix A-7
ASTM D42681993American Society for Testing and MaterialsStandard Test Method for Testing Fiber Ropes33 CFR 164.74(a)(3)(i)
ASTM D42941998American Society for Testing and MaterialsStandard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry40 CFR 75, Appendix A, Section 2.1.1.1(c)
ASTM D43291999American Society for Testing and MaterialsStandard Practice for Fluorescent UV Exposure of Plastics49 CFR 571.106
ASTM D44201994American Society for Testing and MaterialsStandard Test Method for Determination of Aromatics in Finished Gasoline by Gas Chromatography40 CFR 61.67(h)(1)
ASTM D44421992American Society for Testing and MaterialsStandard Test Method for Direct Moisture Content Measurement of Wood and Wood-Based Materials40 CFR 60, Appendix A-8
ASTM D44441992American Society for Testing and MaterialsStandard Test Method for Use and Calibration of Hand-Held Moisture Meters40 CFR 60, Appendix A-8
ASTM D47631988American Society for Testing and MaterialsStandard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy40 CFR 136.3(a) Table IF
ASTM D48091995American Society for Testing and MaterialsStandard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)40 CFR 61.245(e)(3)
ASTM D4891 (pdf)
ASTM D4891 (html)
1989American Society for Testing and MaterialsStandard Test Method for Heating Value of Gases in Natural Gas Range by Stolchiometric Combustion40 CFR 75, Appendix F, Section 5.5.2
ASTM D49861998American Society for Testing and MaterialsStandard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials46 CFR 32.57-10(d)(7–a)
ASTM D52571997American Society for Testing and MaterialsStandard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography40 CFR 136.3(a)
ASTM D53731993American Society for Testing and MaterialsStandard Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke40 CFR 75, Appendix G
ASTM D53921993American Society for Testing and MaterialsStandard Test Method for Isolation and Enumeration of Escherichia Coli in Water by the Two-Step Membrane Filter Procedure40 CFR 136.3(a) Table IH
ASTM D54891996American Society for Testing and MaterialsStandard Guide for Care Symbols for Care Instructions on Textile Products16 CFR 423.8(g)
ASTM D56731996American Society for Testing and MaterialsStandard Test Method for Elements in Water by Inductively Coupled Plasma40 CFR 444.12(b)(1)
ASTM D58651998American Society for Testing and MaterialsStandard Test Method for Gross Calorific Value of Coal and Coke40 CFR 60.45(f)(5)(ii)
ASTM D62161998American Society for Testing and MaterialsStandard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications40 CFR 60, Appendix B
ASTM D62281998American Society for Testing and MaterialsStandard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection40 CFR 60.334(h)(1)
ASTM D64201999American Society for Testing and MaterialsStandard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry40 CFR 63.5850(e)(4)
ASTM D65031999American Society for Testing and MaterialsStandard Test Method for Enterococci in Water Using Enterolert40 CFR 136.3(a) Table IH
ASTM D65222000American Society for Testing and MaterialsStandard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers40 CFR 60.335(a)(2)
ASTM E111970American Society for Testing and MaterialsStandard Specification for Wire Cloth and Sieves for Testing Purposes33 CFR 159.4
ASTM E111995American Society for Testing and MaterialsStandard Specification for Wire Cloth and Sieves for Testing Purposes33 CFR 159.125
ASTM E231982American Society for Testing and MaterialsStandard Test Methods for Notched Bar Impact Testing of Metallic Materials46 CFR 56.50-105(a)(1)(ii)
ASTM E231993American Society for Testing and MaterialsStandard Test Method for Notched Bar Impact Testing of Metallic Materials46 CFR 56.50-105(a)(1)(ii)
ASTM E291967American Society for Testing and MaterialsStandard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications40 CFR 86.609-98
ASTM E291990American Society for Testing and MaterialsStandard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications40 CFR 86.000-28(a)(4)(iii)
ASTM E29 (pdf)
ASTM E29 (html)
2002American Society for Testing and MaterialsStandard Specification for Diesel Fuel Oils40 CFR 1065.701 Table 1
ASTM E721980American Society for Testing and MaterialsStandard Test Methods of Conducting Strength Tests of Panels for Building Construction30 CFR 75.333(e)(1)(i)
ASTM E84 (pdf)
ASTM E84 (html)
2001American Society for Testing and MaterialsStandard Test Method for Surface Burning Characteristics of Building Materials24 CFR 3280.203(a)
ASTM E961995American Society for Testing and MaterialsStandard Test Methods for Water Vapor Transmission of Materials24 CFR 3280.504(a)
ASTM E119 (pdf)
ASTM E119 (html)
2000American Society for Testing and MaterialsStandard Test Methods for Fire Tests of Building Construction and Materials49 CFR 238 Appendix B(a)(1)(v)
ASTM E1451994American Society for Testing and MaterialsStandard Specification for Gravity-Convection and Forced- Ventilation Ovens40 CFR 63.14
ASTM E1451994American Society for Testing and MaterialsStandard Specification for Gravity-Convection and Forced- Ventilation Ovens40 CFR 63.4581
ASTM E1541968American Society for Testing and MaterialsMaterials for Use as Vapor Barriers Under Concrete Slabs and as Ground Cover in Crawl Spaces24 CFR 200, Subpart S
ASTM E1631963American Society for Testing and MaterialsMethods for Fire Tests of Window Assemblies24 CFR 200, Subpart S
ASTM E1681967American Society for Testing and MaterialsStandard Practices for General Techniques of Infrared Quantitative Analysis40 CFR 60.485(d)(1)
ASTM E1681988American Society for Testing and MaterialsStandard Practices for General Techniques of Infrared Quantitative Analysis40 CFR 264.1063(d)(1)
ASTM E1691987American Society for Testing and MaterialsStandard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis40 CFR 264.1063(d)(1)
ASTM E1851982American Society for Testing and MaterialsStandard Practice for Conducting Surveillance Tests for Light-Water Cooled Nuclear Power Reactor Vessels10 CFR 50 App. H, I
ASTM E2581967American Society for Testing and MaterialsStandard Test Method for Total Nitrogen Inorganic Material by Modified Kjeldahl Method40 CFR 761.71(b)(2)(vi)
ASTM E2601996American Society for Testing and MaterialsStandard Practice for Packed Column Gas Chromatography40 CFR 60.485(d)(1)
ASTM E2831991American Society for Testing and MaterialsStandard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors10 CFR 434.402.2
ASTM E2981968American Society for Testing and MaterialsStandard Methods for Assay of Organic Peroxides49 CFR 571.116 S6.11.3(a)
ASTM E4081971American Society for Testing and MaterialsStandard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques16 CFR 460.5(b)
ASTM E4241971American Society for Testing and MaterialsTest for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials24 CFR 200, Subpart S
ASTM E6061980American Society for Testing and MaterialsStandard Recommended Practice for Constant-Amplitude Low-Cycle Fatigue Testing24 CFR 200.946
ASTM E6811985American Society for Testing and MaterialsStandard Test Method for Concentration Limits of Flammability of Chemicals49 CFR 173.115(a)(2)
ASTM E6951979American Society for Testing and MaterialsStandard Method of Measuring Relative Resistance of Wall, Floor and Roof Construction to Impact Loading24 CFR 200.946(a)(1)(viii)
ASTM E7111987American Society for Testing and MaterialsStandard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter40 CFR 63, Subpart DDDDD, Table 6
ASTM E7731997American Society for Testing and MaterialsStandard Test Method for Seal Durability of Sealed Insulating Glass Units4 CFR 3280.403(d)(2)
ASTM E7741997American Society for Testing and MaterialsStandard Specifications for Sealed Insulating Glass Units24 CFR 3280.403(d)(2)
ASTM E7751987American Society for Testing and MaterialsStandard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel40 CFR 49.123(e)
ASTM E7761987American Society for Testing and MaterialsStandard Test Method for Forms of Chlorine in Refuse-Derived Fuel40 CFR 63, Subpart DDDDD, Table 6
ASTM E8851988American Society for Testing and MaterialsStandard Test Method for Analyses of Metals in Refuse-Derived Fuel by Atomic Absorption Spectroscopy40 CFR 63, Subpart DDDDD, Table 6
ASTM E13331996American Society for Testing and MaterialsStandard Test Method for Determining Formaldehyde Levels from Wood Products Under Defined Test Conditions Using a Large Chamber24 CFR 3280.406(b)
ASTM E13371990American Society for Testing and MaterialsStandard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire49 CFR 571.105 S6.9.2(a)
ASTM E1590 (pdf)
ASTM E1590 (html)
2001American Society for Testing and MaterialsStandard Test Method for Fire Testing of Mattresses49 CFR 238 Appendix B(a)(1)(xi)
ASTM E16251994American Society for Testing and MaterialsStandard Test Method for Determining Biodegradability of Organic Chemicals in Semi-Continuous Activated Sludge40 CFR 799.5085
ASTM E17191997American Society for Testing and MaterialsStandard Test Method for Vapor Pressure of Liquids by Ebulliometry40 CFR 799.5085
ASTM F4621979American Society for Testing and MaterialsSlip-Resistant Bathing Facilities24 CFR 200, Subpart S
ASTM F4761984American Society for Testing and MaterialsStandard Test Method for Security of Swinging Door Assemblies24 CFR 200.949(a)(1)(ix)
ASTM F4781992American Society for Testing and MaterialsStandard Specification for In-Service Care of Insulating Line Hose and Covers29 CFR 1910.137(b)(2)(ix)
ASTM F6311980American Society for Testing and MaterialsStandard Guide for Collecting Skimmer Performance Data in Controlled Environments33 CFR 156.40
ASTM F6311993American Society for Testing and MaterialsStandard Guide for Collecting Skimmer Performance Data in Controlled Environments33 CFR 154 Appendix C
ASTM F6821982American Society for Testing and MaterialsStandard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings46 CFR 56.01-2
ASTM F7151981American Society for Testing and MaterialsStandard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage33 CFR 154.106
ASTM F7151995American Society for Testing and MaterialsStandard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage33 CFR 155, Appendix B, 2.4
ASTM F7221982American Society for Testing and MaterialsStandard Specification for Welded Joints for Shipboard Piping Systems33 CFR 155.140
ASTM F8081983American Society for Testing and MaterialsGuide for Collecting Skimmer Performance Data in Uncontrolled Environments33 CFR 154, Appendix C
ASTM F8081983American Society for Testing and MaterialsGuide for Collecting Skimmer Performance Data in Uncontrolled Environments33 CFR 154, Appendix C, 6.3.1
ASTM F10031986American Society for Testing and MaterialsStandard Specification for Searchlights on Motor Lifeboats46 CFR 199.175(a)(28)(i)
ASTM F10061986American Society for Testing and MaterialsStandard Specification for Entrainment Separators for Use in Marine Piping Applications46 CFR 56.60-1(b)
ASTM F10071986American Society for Testing and MaterialsStandard Specification for Pipe-Line Expansion Joints of the Packed Slip Type for Marine Application46 CFR 56.60-1(b)
ASTM F10141992American Society for Testing and MaterialsStandard Specification for Flashlights on Vessels46 CFR 35.30-20(c)(3)
ASTM F10201986American Society for Testing and MaterialsStandard Specification for Line-Blind Valves for Marine Applications46 CFR 56.60-1(b)
ASTM F11201987American Society for Testing and MaterialsStandard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications46 CFR 56.60-1(b)
ASTM F11211987American Society for Testing and MaterialsStandard Specification for International Shore Connections for Marine Fire Applications33 CFR 126.15(a)(5)
ASTM F11221987American Society for Testing and MaterialsStandard Specification for Quick Disconnect Couplings33 CFR 154.500(d)(3)
ASTM F11231987American Society for Testing and MaterialsStandard Specification for Non-Metallic Expansion Joints46 CFR 56.60-1(b)
ASTM F11391988American Society for Testing and MaterialsStandard Specification for Steam Traps and Drains46 CFR 56.60-1(b)
ASTM F11551998American Society for Testing and MaterialsStandard Practice for Selection and Application of Piping System Materials33 CFR 154
ASTM F11721988American Society for Testing and MaterialsFuel Oil Meters of the Volumetric Positive Displacement Type46 CFR 56.60-1(b)
ASTM F11731995American Society for Testing and MaterialsStandard Specification for Thermosetting Resin Fiberglass Pipe and Fittings to be Used for Marine Applications46 CFR 56.60-1(b)
ASTM F11961994American Society for Testing and MaterialsStandard Specification for Sliding Watertight Door Assemblies46 CFR 170.270(c)(1)
ASTM F11971989American Society for Testing and MaterialsStandard Specificatiion for Sliding Watertight Door Control Systems46 CFR 174.100(e)(2)
ASTM F11991988American Society for Testing and MaterialsCast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150 Degrees F Maximum)46 CFR 56.60-1(b)
ASTM F12001988American Society for Testing and MaterialsStandard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)46 CFR 56.60-1(b)
ASTM F12011988American Society for Testing and MaterialsStandard Specification for Fluid Conditioner Fittings in Piping Applications Above Zero Degrees F46 CFR 56.60-1(b)
ASTM F12711990American Society for Testing and MaterialsStandard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protection Applications46 CFR 39.20-9(c)(1)
ASTM F12731991American Society for Testing and MaterialsStandard Specification for Tank Vent Flame Arresters46 CFR 32.20-10
ASTM F12922004American Society for Testing and MaterialsStandard Specification for Impact Attenuation of Surface Systems Under and Around Playground Equipment36 CFR 1191, App B, 105.2.3
ASTM F13211992American Society for Testing and MaterialsStandard Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine Light Ship Displacement and Centers of Gravity of a Vessel46 CFR 28.535(d)
ASTM F13231998American Society for Testing and MaterialsStandard Specification for Shipboard Incinerators46 CFR 63.25-9
ASTM F14711993American Society for Testing and MaterialsStandard Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air-Filter System40 CFR 86.1310-2007(b)(1)(iv)(B)
ASTM F15461996American Society for Testing and MaterialsStandard Specification for Firehose Nozzles46 CFR 162.027-3(a)
ASTM F15481994American Society for Testing and MaterialsPerformance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications46 CFR 56.30-35(a)
ASTM F19511999American Society for Testing and MaterialsStandard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment36 CFR 1191, App B, 1008.2.6.1
ASTM F2412 (pdf)
ASTM F2412 (html)
ASTM F2412 (svg)
2005American Society for Testing and MaterialsStandard Test Methods for Foot Protection29 CFR 1910
ASTM F2413 (pdf)
ASTM F2413 (html)
2005American Society for Testing and MaterialsPerformance Requirements for Protective Footware29 CFR 1910
ASTM G211990American Society for Testing and MaterialsStandard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi7 CFR 1755.910(d)(5)(iv)
ASTM G231969American Society for Testing and MaterialsStandard Practice for Operating Light Exposure Apparatus (Carbon Arc Type) With and Without Water for Exposure of Nonmetallic Materials49 CFR 571.209 S5.1(e)
ASTM G261970American Society for Testing and MaterialsStandard Recommended Practice for Light- and Water-Exposure Apparatus (Xenon-Arc Type) for Exposure of Non-metallic Materials16 CFR 1201.4(b)(3)(ii)
ASTM G1511997American Society for Testing and MaterialsStandard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources49 CFR 571.106 S12.7(b)
ASTM G1542000American Society for Testing and MaterialsStandard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials49 CFR 571.106 S12.7(b)
ATAA 3001996Air Transport Association of AmericaPackaging of Airline Supplies, Revision 1949 CFR 171.7
AWPA A11991American Wood Preservers AssociationStandard Methods for Analysis of Creosote and Oil-Type Preservatives7 CFR 1728.201(i)(1)(i)
AWPA A21991American Wood Preservers AssociationStandard Methods for Analysis of Waterborne Preservatives and Fire-Retardant Formulations7 CFR 1728.201(i)(1)(iii)(A)
AWPA A31991American Wood Preservers AssociationStandard Methods for Determining Penetration of Preservatives and Fire Retardants7 CFR 1728.201(k)(3)
AWPA A51991American Wood Preservers AssociationStandard Methods for Analysis of Oil-Borne Preservatives7 CFR 1728.202(g)(1)(v)(B)
AWPA A61989American Wood Preservers AssociationMethod for the Determination of Oil-Type Preservatives and Water in Wood7 CFR 1728.202(g)(1)(v)(A)
AWPA A71975American Wood Preservers AssociationStandard Wet Ashing Procedure for Preparing Wood for Chemical Analysis7 CFR 1728.202(g)(1)(v)(D)
AWPA A91990American Wood Preservers AssociationStandard Method for Analysis of Treated Wood and Treating Solutions by X-ray Spectroscopy7 CFR 1728.202(g)(1)(v)(C)
AWPA A111983American Wood Preservers AssociationStandard Method for Analysis of Treated Wood and Treating Solutions by Atomic Absorption Spectroscopy7 CFR 1728.201(i)(1)(iii)(B)
AWPA M31981American Wood Preservers AssociationStandard Quality Control Procedures for Wood Preserving Plants7 CFR 1728.202(f)(1)
AWPA P11991American Wood Preservers AssociationStandard for Coal Tar Creosote for Land and Fresh Water and Marine (Coastal) Water Use7 CFR 1728.201(i)(1)(i)
AWPA P51991American Wood Preservers AssociationStandard for Waterborne Preservative7 CFR 1728.201(i)(1)(iii)(A)
AWPA P81991American Wood Preservers AssociationStandard for Oil-Borne Preservatives7 CFR 1728.201(i)(1)(iv)
AWPA P91991American Wood Preservers AssociationStandard for Solvents and Formulations for Organic Preservative Systems7 CFR 1728.201(i)(1)(iv)
AWS B3.01977American Welding SocietyStandard Qualification Procedure49 CFR 178.356-2(e)
AWS D1.12000American Welding SocietyStructural Welding Code--Steel30 CFR 250.901(a)(20)
BHMA A156.101999Builders Hardware Manufacturers AssociationPower Operated Pedestrian Doors36 CFR 1191, App B, 105.2.1
BHMA A156.192002Builders Hardware Manufacturers AssociationPower Assist and Low Energy Power Operated Doors36 CFR 1191, App B, 408.3.2.1
BOCA1993Building Officials and Code Administrators InternationalMechanical Code24 CFR 200.925c(a)(1)(i)
BOCA1993Building Officials and Code Administrators InternationalPlumbing Code24 CFR 200.925c(a)(1)(i)
BSI EN-13000 (pdf)
BSI EN-13000 (html)
2004British Standards InstituteCranes--Safety--Mobile Cranes29 CFR 1926
BSI EN-14439 (pdf)
BSI EN-14439 (html)
2006British Standards InstituteCranes--Safety--Tower Cranes29 CFR 1926
CEC Test Method2004California Energy CommissionCalculating the Energy Efficiency of Single-Voltage External Ac-Dc and Ac-Ac Power Supplies10 CFR 430 Subpart B
CABO1992Council of American Building OfficialsOne and Two Family Dwelling Code24 CFR 200.926b(c)
CABO1993Council of American Building OfficialsOne and Two Family Dwelling Code with Errata Package and 1993 Amendments24 CFR 200.926(d)(1)(ii)((B)(2)(ii)
CFTA1977Cosmetic, Toiletry, and Fragrance AssociationCosmetic Ingredient Dictionary21 CFR 701.3(c)(2)(i)
CGA C-51991Compressed Gas AssociationCylinder Service Life-Seamless Steel High Pressure Cylinders49 CFR 173.302a(b)(3)(i)(A)
CGA C-81985Compressed Gas AssociationStandard for Requalification of DOT-3HT Cylinders49 CFR 180.205(f)(1)
CGA C-112001Compressed Gas AssociationRecommended Practice for Inspection of Compressed Gas Cylinders at Time of Manufacture49 CFR 178.35(g)
CGA C-121994Compressed Gas AssociationQualification Procedure for Acetylene Cylinder Design49 CFR 173.303(a)
CGA C-132000Compressed Gas AssociationGuidelines for Periodic Visual Inspection and Requalification of Acetylene Cylinders49 CFR 173.303(e)
CGA G-12009Compressed Gas AssociationAcetylene29 CFR 1910.102(a)
CGA G-2.21985Compressed Gas AssociationGuideline Method for Determining Minimum of 0.2% Water in Anhydrous Ammonia49 CFR 173.315(l)(5)
CGA G-4.11985Compressed Gas AssociationCleaning Equipment for Oxygen Service49 CFR 178.338-15
CGA P-11965Compressed Gas AssociationSafe Handling of Compressed Gases29 CFR 1910.101(b)
CGA P-202003Compressed Gas AssociationStandard for the Classification of Toxic Gas Mixtures49 CFR 173.115
CGA S-1.12005Compressed Gas AssociationPressure Relief Device Standards49 CFR 173.301(c)
CGA S-1.21980Compressed Gas AssociationSafety Release Device Standard--Cargo and Portable Tanks for Compressed Gases49 CFR 178.277(e)(4)(iv)
CGA S-7 (pdf)
CGA S-7 (html)
2005Compressed Gas AssociationMethod for Selecting Pressure Relief Devices for Compressed Gas Mixtures in Cylinders49 CFR 173.301(c)
CGA TB-21980Compressed Gas AssociationGuidelines for Inspection and Repair of MC-330 and MC-331 Cargo Tanks49 CFR 180.407(g)(3)
CGA TB-252008Compressed Gas AssociationDesign Considerations for Tube Trailers49 CFR 173.301
CGSB 43.1472005Canadian General Standards BoardConstruction, Modification, Qualification, Maintenance, and Selection and Use of Means of Containment for the Handling, Offering for Transport, or Transportation of Dangerous Goods by Rail49 CFR 171.12
CGSB 43.1472005Office des Normes Generales du CanadaConstruction, Modification, Qualification, Entretien, Selection Et Utilisation Des Contenants Pour La Manutention, La Demande De Transport Ou La Transport Des Marchandises Dangereuses Par Chemin De Fer49 CFR 171.12
CI 572009Chlorine InstituteEmergency Shut-Off Systems for Bulk Transfer of Chlorine49 CFR 177.840(u)
CI 101-71993Chlorine InstituteExcess Flow Valve with Removable Seat49 CFR 178.276(c)(7)(i)
CI 104-92002Chlorine InstituteStandard Chlorine Angle Valve Assembly49 CFR 178.337-9(b)(8)
CI 106-61993Chlorine InstituteExcess Flow Valve with Removable Baskets49 CFR 178.276(c)(7)(ii)
CI 1662002Chlorine InstituteAngle Valve Guidelines for Chlorine Bulk Transportation49 CFR 178.337-9(b)(8)
CI H501551996Chlorine InstitutePressure Relief Device for Chlorine Service49 CFR 173.315(i)(13)
CI H519701996Chlorine InstituteSafety Valve for Chlorine Service49 CFR 173.315(i)(13)
CI2009Chlorine InstituteChlorine Institute Emergency Kit A for 100-lb. and 150-lb. Chlorine Cylinders49 CFR 173.3(e)(1)
CI2009Chlorine InstituteChlorine Institute Emergency Kit B for Chlorine Ton Containers49 CFR 173.3(e)(1)
CIE 152004International Commission on IlluminationTechnical Report: Colorimetry, 3rd edition10 CFR 430 Subpart B, App. R, 4.1.1
CIE 15A (xls)2004International Commission on IlluminationSupplementary Spectra10 CFR 430 Subpart B, App. R, 4.1.1
CIE 15B (xls)2004International Commission on IlluminationSupplementary Tables10 CFR 430 Subpart B, App. R, 4.1.1
CRA A-201986Corn Refiners AssociationAnalysis for Starch in Corn7 CFR 801.7(a)(2)
CSA C3901993Canadian Standards AssociationEnergy Efficiency Test Methods for Three-Phase Induction Motors10 CFR 431.19(b)(4)
CTIOA R8-103-621969Ceramic Tile Institute of AmericaStandard Specifications for the Installation of Tile Lined Shower Receptors24 CFR 200, Subpart S
CSVA2004Commercial Vehicle Safety AllianceNorth American Standard Out-of-Service Criteria and Level VI Inspection Procedures and Out-of-Service Criteria for Commercial Highway Vehicles49 CFR 385.415(b)(1)
EI IP-5012005Energy InstituteDetermination of aluminum, silicon, vanadium, nickel, iron, sodium, calcium, zinc and phosphorus in residual fuel oil40 CFR 1065.705 Table 1
FGMA1990Flat Glass Marketing AssociationGlazing Manual24 CFR 200, Subpart S
GLI METHOD 22009Great Lakes InstrumentsTurbidity40 CFR 141.74(a)(1)
GPA 22612000Gas Producers AssociationAnalysis of Natural Gas and Similar Gaseous Mixtures by Gas Chromatography40 CFR 75, Appendix F, Section 5.5.2
GPA 22612000Gas Processors AssociationAnalysis of Natural Gas and Similar Gaseous Mixtures by Gas Chromatography40 CFR 75, Appendix F
GPA 23771986Gas Processors AssociationTest for Hydrogen Sulfide and Carbon Dioxide in Natural Gas Using Length of Stain Tubes40 CFR 60.334(h)(1)
GRI 02-00572002Gas Research InstituteInternal Corrosion Direct Assessment of Gas Transmission Pipelines Methodology49 CFR 192.927(c)(2)
HACH 80002007Hach Chemical CompanyOxygen Demand, Chemical Using Reactor Digestion Method40 CFR 136.3(a)
HACH 80082007Hach Chemical Company1, 10--Phenanthroline Method Using FerroVer Iron Reagent for Water40 CFR 136.3(a)
HACH 80092007Hach Chemical CompanyZincon Method for Zinc, Hatch Handbook of Water Analysis40 CFR 444.12(b)(1)
HACH 80342007Hach Chemical CompanyPeriodate Oxidation Method for Manganese40 CFR 136.3(a)
HACH 85072007Hach Chemical CompanyNitrogen Nitrite--Low Range, Diazotization Method for Water and Wastewater40 CFR 136.3(a)
HI BTS-20002007Hydronics InstituteMethod to Determine Efficiency of Commercial Space Heating Boilers10 CFR 431.86
HPMA HP-SG-961996Hardwood Plywood Manufacturers AssociationStructural Design Guide for Hardwood Plywood Wall Panels24 CFR 3280.304(b)(1)
IAPMO PS-21989International Association of Plumbing and Mechanical OfficialsMaterial and Property Standard for Cast Brass and Tubing P-Traps24 CFR 3280.604(b)(2)
IAPMO PS-51984International Association of Plumbing and Mechanical OfficialsMaterial and Property Standard for Special Cast Iron Fittings24 CFR 3280.604(b)(2)
IAPMO PS-91984International Association of Plumbing and Mechanical OfficialsMaterial and Property Standard for Diversion Tees and Twin Waste Elbow24 CFR 3280.604(b)(2)
IAPMO PS-141989International Association of Plumbing and Mechanical OfficialsMaterial and Property Standard for Flexible Metallic Water Connectors24 CFR 3280.604(b)(2)
IAPMO PS-231989International Association of Plumbing and Mechanical OfficialsMaterial and Property Standard for Dishwasher Drain Airgaps24 CFR 3280.604(b)(2)
IAPMO PS-311977International Association of Plumbing and Mechanical OfficialsMaterial and Property Standard for Backflow Prevention Devices24 CFR 3280.604(b)(2)
ICAO 92842011International Civil Aviation OrganizationTechnical Instructions for the Safe Transport of Dangerous Goods by Air49 CFR 171.7
ICAO Annex 21990International Civil Aviation OrganizationConvention on International Civil Aviation, Rules of the Air14 CFR 135.3(a)(2)
ICAO Annex 162008International Civil Aviation OrganizationEnvironmental Protection, Volume II -- Aircraft Engine Emissions40 CFR 87.89
ICBO1991International Conference of Building OfficialsUniform Building Code (1991)24 CFR 200.925c(a)(1)(iii)
ICBO1991International Conference of Building OfficialsUniform Mechanical Code (1991)24 CFR 200.925c(c)(3)
ICEA S-87-6402006Insulated Cable Engineers AssociationStandard for Optical Fiber Outside Plant Communications Cable7 CFR 901(c)
ICEA S-110-7172003Insulated Cable Engineers AssociationStandard for Optical Drop Cable7 CFR 901(c)
ICS1973International Chamber of ShippingClean Seas Guide for Oil Tankers33 CFR 157.23(b)
IEEE 452002Institute of Electrical and Electronics EngineersRecommended Practice for Electrical Installations on Shipboard46 CFR 110.10-1
IEEE 1122004Institute of Electrical and Electronics EngineersTest Procedure for Polyphase Induction Motors and Generators10 CFR 431.15
IEEE 1142010Institute of Electrical and Electronics EngineersIEEE Standard Test Procedure for Single-Phase Induction Motors10 CFR 431
IEEE 1202 (pdf)
IEEE 1202 (html)
1991Institute of Electrical and Electronics EngineersStandard for Flame Testing of Cables46 CFR 111
IEEE C21997Institute of Electrical and Electronics EngineersNational Electrical Safety Code7 CFR 1755.503(d)(1)
IEEE C22007Institute of Electrical and Electronics EngineersNational Electrical Safety Code (2007)7 CFR 1755.901(b)
IEEE C37.142002Institute of Electrical and Electronics EngineersStandard for Low-Voltage AC Power Circuit Breakers Used in Enclosures46 CFR 110.10-1
IEEE P730.11989Institute of Electrical and Electronics EngineersStandard for Software Quality Assurance Plans7 CFR 1755.522(n)(2)
IESNA LM-452000Illuminating Engineering Society of North AmericaMethod for Electrical and Photometric Measurements of General Service Incandescent Filament Lamps10 CFR 430 Subpart B
IME 222011Institute of Makers of ExplosivesRecommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials30 CFR 57.6133(b)
IME1940Institute of Makers of ExplosivesSafety in the Handling and Use of Explosives29 CFR 1910.261(a)(4)(iii)
IMO IMDG.12006International Maritime OrganizationInternational Maritime Dangerous Goods Code (Volume 1)49 CFR 172.519(f)
IMO IMDG.22006International Maritime OrganizationInternational Maritime Dangerous Goods Code (Volume 2)49 CFR 172.519(f)
IMO ISPS2003International Maritime OrganizationInternational Ship and Port Facility Security Code33 CFR 101.410(a)
AG ENG1965Interstate Printers and Publishers, Inc.Agriculture Engineering29 CFR 570.71(b)
ISO 5351991International Organization for StandardizationPaper and Board--Determination of Water Absorptiveness--Cobb Method49 CFR 178.516(b)(1)
ISO 1496-11990International Organization for StandardizationSeries 1 Freight Containers--Specification and Testing--Part 1, General Cargo Containers49 CFR 173.411(b)(6)(iii)
ISO 1496-31995International Organization for StandardizationSeries 1 Freight Containers--Specification and Testing--Part 3, Tank containers for Liquids, Gases and Pressurized Dry Bulk49 CFR 178.74(c)(5)(ii)
ISO 3807-22000International Organization for StandardizationCylinders for acetylene--Basic requirements--Part 2: Cylinders with fusible plugs49 CFR 173.303(f)(1)
ISO 6406 (pdf)
ISO 6406 (html)
2005International Organization for StandardizationSeamless Steel Gas Cylinders--Inspection and Testing49 CFR 180
ISO 72252005International Organization for StandardizationGas Cylinders--Precautionary Labels49 CFR 178.71(r)(2)
ISO 78661999International Organization for StandardizationGas Cylinders--Refillable Seamless Aluminum Alloy Gas Cylinders--Design, Construction and Testing49 CFR 178.71(h)
ISO 81151986International Organization for StandardizationCotton bales—Dimensions and density49 CFR 171.7
ISO 9809-11999International Organization for StandardizationGas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 1: Quenched and Tempered Steel Cylinders with Tensile Strength less than 1 100 MPa49 CFR 178.71(g)(1)
ISO 9809-22000International Organization for StandardizationGas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 2: Quenched and Tempered Steel Cylinders with Tensile Strength Greater than or Equal to 1 100 MPa49 CFR 178.71(g)(2)
ISO 9809-32000International Organization for StandardizationGas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 3: Normalized Steel Cylinders49 CFR 178.71(g)(3)
ISO 99781992International Organization for StandardizationSealed Radioactive Sources--Leak Test Methods49 CFR 173.469(a)(4)(ii)
ISO 102971999International Organization for StandardizationGas cylinders--Refillable gas cylinder valves--Specification and type testing49 CFR 173.301b(c)(1)
ISO 10461 (pdf)
ISO 10461 (html)
2005International Organization for StandardizationSeamless Aluminum Alloy Gas Cylinders--Inspection and Testing49 CFR 180
ISO 10462 (pdf)
ISO 10462 (html)
2005International Organization for StandardizationTransportable Cylinders for Dissolved Acetylene49 CFR 180
ISO 11114-11997International Organization for StandardizationTransportable gas cylinders--Compatibility of cylinder and valve materials with gas contents--Part 1: Metallic materials49 CFR 173.301b(a)(2)
ISO 11114-22000International Organization for StandardizationTransportable gas cylinders-- Compatibility of cylinder and valve materials with gas contents--Part 2: Non- metallic materials49 CFR 173.301b(a)(2)
ISO 111171998International Organization for StandardizationGas cylinders--Valve protection caps and valve guards for industrial and medical gas cylinders--Design, construction and tests49 CFR 173.301b(c)(2)(ii)
ISO 111181999International Organization for StandardizationGas cylinders--Non-refillable metallic gas cylinders--Specification and test methods49 CFR 178.71(i)
ISO 11119-12002International Organization for StandardizationGas cylinders--Gas cylinders of composite construction--Specification and test methods--Part 1: Hoop-wrapped composite gas cylinders49 CFR 171.7
ISO 11119-22002International Organization for StandardizationGas cylinders—Gas cylinders of composite construction—Specification and test methods—Part 2: Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners49 CFR 171.7
ISO 11119-32002International Organization for StandardizationGas cylinders of composite construction--Specification and test methods--Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners49 CFR 171.7
ISO 111201999International Organization for StandardizationGas cylinders--Refillable seamless steel tubes of water capacity between 150 L and 3000 L--Design, construction and testing49 CFR 178.71(j)
ISO 116211997International Organization for StandardizationGas cylinders--Procedures for change of gas service49 CFR 173.301b(a)(2)
ISO 11623 (pdf)
ISO 11623 (html)
2002International Organization for StandardizationPeriodic Inspection and Testing of Composite Gas Cylinders49 CFR 180
ISO 11660-1 (pdf)
ISO 11660-1 (html)
2008International Organization for StandardizationCranes: Access, Guards and Restraints: General29 CFR 1926
ISO 11660-2 (pdf)
ISO 11660-2 (html)
1994International Organization for StandardizationCranes: Access, Guards and Restraints: Mobile Cranes29 CFR 1926
ISO 11660-3 (pdf)
ISO 11660-3 (html)
2008International Organization for StandardizationCranes: Access, Guards and Restraints: Tower Cranes29 CFR 1926
ISO 14230-42000International Organization for StandardizationRoad Vehicles--Diagnostic Systems40 CFR 1048.110(g)(2)
ISO 18902 (pdf)
ISO 18902 (html)
2001International Organization for StandardizationPhotographic Processed Films, Plates, and Papers36 CFR 1237
ISO 18906 (pdf)
ISO 18906 (html)
2000International Organization for StandardizationPhotographic Films--Specifications for Safety Film36 CFR 1237
ITU-R M-493-112004International Telecommunication UnionDigital Selective-calling System for Use in the Maritime Mobile Service, with Annexes 1 and 247 CFR 80.1101(c)(2)(ii)
ITU-R M-541-81997International Telecommunication UnionOperational Procedures for the Use of Digital Selective-Calling Equipment in the Maritime Mobile Service47 CFR 80.1101(c)(4)(iii)
ITU-R M-541-92004International Telecommunication UnionOperational Procedures for the Use of Digital Selective-Calling Equipment in the Maritime Mobile Service47 CFR 80.1101(c)(2)(iii)
ITU-R M-628-31994International Telecommunication UnionTechnical Characteristics for Search and Rescue Radar Transponders47 CFR 80.1101(c)(6)(ii)
ITU-R M-632-31997International Telecommunication UnionTransmission Characteristics of a Satellite Emergency Position Indicating Radio Beacon47 CFR 80.1101(c)(11)(iii)
ITU-R M-633-32004International Telecommunication UnionTransmission characteristics of a satellite emergency position-indicating radiobeacon system operating through a low polar-orbiting satellite system47 CFR 80.1101(c)(5)(iii)
ITU-R M-1371-12001International Telecommunication UnionTechnical Characteristics for a Universal Shipborne Automatic Identification System Using Time Division Multiple Access47 CFR 80.1101(c)(12)(i)
ITU-T E.1612001International Telecommunication UnionArrangement of Digits, Letters and Symbols on Telephones and Other Devices that Can Be Used for Gaining Access to a Telephone Network47 CFR 80.1101(b)(2)
ITU-T E.164.12008International Telecommunication UnionNumbering Plan of the International Telephone Service47 CFR 80.1101(b)(3)
LACHAT 10-2042008Lachat InstrumentsDigestion and Distillation of Total Cyanide in Drinking and Wastewaters40 CFR 136.3(a) Table IB
STEAM1917Commonwealth of MassachusettsDistrict Police Steam Boiler Rules
MSS SP-441996Manufacturers Standardization SocietySteel Pipe Line Flanges46 CFR 56.01-2
MSS SP-752004Manufacturers Standardization SocietySpecification for High-Test Wrought Butt Welding Fittings49 CFR 118(a)
NACE RP-05022002National Association of Corrosion EngineersPipeline External Corrosion Direct Assessment Methodology49 CFR 192.925(b)(3)
NACM2003National Association of Chain ManufacturersWelded Steel Chain Specifications49 CFR 393.104(e)(2)
NAS1972National Academy of SciencesFood Chemicals Codex (1972)21 CFR 701.3(c)(2)(iv)
NAS1996National Academy of SciencesFood Chemicals Codex (1996)21 CFR 184
NAS2011National Academy of SciencesPrudent Practices in the Laboratory: Handling and Disposal of Chemicals42 CFR 52b.12(c)(6)
NCASI 98-011998National Council of the Paper Industry for Air and Stream ImprovementsChilled Impinger Method For Use At Wood Products Mills to Measure Formaldehyde, Methanol, and Phenol40 CFR 63, Subpart DDDD
NCASII 94-032002National Council of the Paper Industry for Air and Stream ImprovementsMethanol in Process Liquids by Gas Chromatography/Flame Ionization Detection40 CFR 63.457(c)(3)(ii)
NCASI A1052001National Council of the Paper Industry for Air and Stream ImprovementsImpinger Source Sampling Method for Selected Aldehydes, Ketones, and Polar Compounds40 CFR 63, Subpart DDDD
NCASI 99-022002National Council of the Paper Industry for Air and Stream ImprovementsImpinger/Canister Source Sampling Method For Selected HAPs and Other Compounds at Wood Products Facilities40 CFR 63, Subpart DDDD
NCCA2011National Cotton Council of AmericaSpecifications for Cotton Bale Packaging Material7 CFR 1427.5(b)(10)
UCC2002National Conference of Commissioners on Uniform State Laws2002 Official Text and Comments, Sections 8–102 and 8-10317 CFR 270.17f-4(c)(1)
UCC2002National Conference of Commissioners on Uniform State Laws2002 Official Text and Comments, Sections 8–501 through 8–51117 CFR 270.17f-4(c)(1)
NCUTLO1969National Committee on Uniform Traffic Laws and OrdinancesUniform Vehicle Code and Model Ordinance41 CFR 50-204.75
NFPA 10 (pdf)
NFPA 10 (html)
NFPA 10 (svg)
2002National Fire Protection AssociationStandard for Portable Fire Extinguishers29 CFR 1915
NFPA 11 (pdf)
NFPA 11 (html)
2005National Fire Protection AssociationStandard for Foam29 CFR 1915
NFPA 12 (pdf)
NFPA 12 (html)
2005National Fire Protection AssociationStandard for Carbon Dioxide Extinguishing Systems29 CFR 1915
NFPA 132002National Fire Protection AssociationStandard for the Installation of Sprinkler Systems36 CFR 1234.12(i)
NFPA 25 (pdf)
NFPA 25 (html)
2002National Fire Protection AssociationStandard for Water-Based Fire Protection Systems29 CFR 1915
NFPA 30 (pdf)
NFPA 30 (html)
2003National Fire Protection AssociationFlammable and Combustible Liquids Code49 CFR 192
NFPA 54 (pdf)
NFPA 54 (html)
NFPA 54 (svg)
2002National Fire Protection AssociationNational Fuel and Gas Code24 CFR 3280
NFPA 58 (pdf)
NFPA 58 (html)
2001National Fire Protection AssociationStandard for Liquefied Petroleum Gases49 CFR 173
NFPA 582004National Fire Protection AssociationStandard for the Storage and Handling of Liquefied Petroleum Gases49 CFR 192.11(b)
NFPA 592004National Fire Protection AssociationStandard for the Storage and Handling of Liquefied Petroleum Gases at Utility Gas Plants49 CFR 192.11(b)
NFPA 72 (pdf)
NFPA 72 (html)
NFPA 72 (svg)
2002National Fire Protection AssociationNational Fire Alarm Code29 CFR 1915
NFPA 992005National Fire Protection AssociationStandard for Health Care Facilities38 CFR 51.200(b)(4)
NFPA 101 (pdf)
NFPA 101 (html)
2000National Fire Protection AssociationLife Safety Code59 CFR 130
NFPA 7042007National Fire Protection AssociationStandard System for the Identification of the Hazards of Materials for Emergency Response6 CFR 27.204(a)(2)
NFPA DUST1957National Fire Protection AssociationReport of Important Dust Explosions
NFPA HOST1953National Fire Protection AssociationHandling Hose and Ladders
NFPA 702005National Fire Protection AssociationNational Electrical Code49 CFR 192.189(c)
NACHA2005National Automated Clearing House AssociationA Complete Guide to the Rules Governing the ACH Network45 CFR 162.920
ISS-MCB2011International Space Station Multilateral Coordination BoardInternational Docking Standard1 Code of Intergalactic Regulations 32
NCRP 331968National Council on Radiation Protection and MeasurementMedical X-ray and Gamma-Ray Protection for Energies Up to 10 MeV--Equipment Design and Use42 CFR 37.43
NCRP 481976National Council on Radiation Protection and MeasurementMedical Radiation Protection for Medical and Allied Health Personnel42 CFR 37.43
NCRP 491976National Council on Radiation Protection and MeasurementStructural Shielding Design and Evaluation for Medical Use of X-Rays and Gamma-Rays up to 10 MeV42 CFR 37.43
NEMA MG-12009National Electrical Manufacturers AssociationMotors and Generators10 CFR 431
NSF 61 (pdf)
NSF 61 (html)
2001National Sanitation FoundationDrinking Water System Components--Health Effects24 CFR 3280
OECD 4042002Organization for Economic Cooperation and DevelopmentGuideline for Testing of Chemicals, Acute Dermal Irritation/Corrosion49 CFR 173.137
OECD C931974Organization for Economic Cooperation and DevelopmentGreen List of Wastes40 CFR 262.89(e)
OR REG1975State of OregonOregon Grade Standards Hazelnuts in Shell7 CFR 982.45(a)
ORION1970ORION Research IncorporatedResidual Chlorine Electrode Model 97-7040 CFR 136.3(a) Table IB
PCI MNL-1211977Precast/Prestressed Concrete InstituteManual for Structural Design of Architectural Precast Concrete24 CFR 200, Subpart S
PCI MNL-117-771977Precast/Prestressed Concrete InstituteManual for Quality Control for Plants and Production of Architectural Precast Concrete Products24 CFR 200, Subpart S
PCSA 11968Power Crane and Shovel AssociationMobile Crane and Excavator Standards29 CFR 1926.602(b)(3)
PCSA 21968Power Crane and Shovel AssociationMobile Hydraulic Crane Standards29 CFR 1926.602(b)(3)
PCSA 31969Power Crane and Shovel AssociationMobile Hydraulic Excavator Standards29 CFR 1926.602(b)(3)
PPI TR-32004Plastics Pipe InstitutePolicies and Procedures for Developing Hydrostatic Design Bases (HDB), Pressure Design Bases (PDB), and Minimum Required Thermoplastic Piping Materials49 CFR 192.121
RTCM C0711995Radio Technical Commission for Maritime ServicesRecommended Standards for Marine Radar Equipment Installed on Ships of Less Than 300 Tons Gross Tonnage33 CFR 164.72(a)(1)(i)(B)
RTCM C1911993Radio Technical Commission for Maritime ServicesRecommended Standards for Marine Radar Equipment Installed on Ships of 300 Tons Gross Tonnage and Upwards33 CFR 164.72(a)(1)(iii)(B)
SAE Paper 7701411977Society of Automotive EngineersOptimization of a Flame Ionization Detector for Determination of Hydrocarbon in Diluted Automotive Exhausts40 CFR 1065.360(c)
SAE J4C1965Society of Automotive EngineersMotor Vehicle Seat Belt Assembly29 CFR 1928.51(b)(2)(ii)
SAE J301998Society of Automotive EngineersFuel and Oil Hoses40 CFR 1051.501(c)(2)
SAE J1661971Society for Automotive EngineeringMinimum Performance Criteria for Brake Systems for Off-Highway Trucks and Wagons29 CFR 1926.602(a)(4)
SAE J1661971Society of Automotive EngineersMinimum Performance Criteria for Brake Systems for Off-Highway Trucks and Wagons29 CFR 1926.602(a)(4)
SAE J1671970Society for Automotive EngineeringProtective Frame with Overhead Protection29 CFR 1926.1003(g)
SAE J1671974Society of Automotive EngineersProtective Frame with Overhead Protection30 CFR 77.403-1(d)(1)(v)
SAE J1681970Society for Automotive EngineeringProtective Enclosures--Test Procedures and Performance Requirements29 CFR 1926.1002(a)(5)(i)
SAE J1851988Society of Automotive EngineersRecommended Practice for Access Systems for Off-Road Machines29 CFR 1910.266(f)(5)(i)
SAE J186A1977Society of Automotive EngineersSupplemental High Mounted Stop and Rear Turn Signal Lamps49 CFR 571.108
SAE J211-1 (pdf)
SAE J211-1 (html)
1995Society of Automotive EngineersInstrumentation for Impact Test49 CFR 571
SAE J2111971Society of Automotive EngineersInstrumentation for Impact Tests49 CFR 571.222 S6.6.2
SAE J2221970Society of Automotive EngineersParking Lamps (Position Lamps)49 CFR 571.108 S5.1.1.6
SAE J2311971Society for Automotive EngineeringMinimum Performance Criteria for Falling Object Protective Structures (FOPS)30 CFR 77.403(a)
SAE J2311971Society of Automotive EngineersMinimum Performance Criteria for Falling Object Protective Structures (FOPS)30 CFR 77.403(a)
SAE J2311981Society of Automotive EngineersMinimum Performance Criteria for Falling Object Protective Structures (FOPS)29 CFR 1910.266(f)(3)(iii)
SAE J2361971Society for Automotive EngineeringMinimum Performance Criteria for Brake Systems for Rubber Tire Self-Propelled Graders29 CFR 1926.602(a)(4)
SAE J2371971Society for Automotive EngineeringMinimum Performance Criteria for Brake Systems for Off-Highway Rubber-Tired Front End Loaders and Dozers29 CFR 1926.602(a)(4)
SAE J2441983Society for Automotive EngineeringRecommend Practice for Measurement of Intake Air or Exhaust Gas Flow of Diesel Engines40 CFR 92.108(a)(3)
SAE J3191971Society of Automotive EngineersMinimum Performance Criteria for Brake Systems for Off-Highway Rubber-Tired Self-Propelled Scrapers29 CFR 1926.602(a)(4)
SAE J3201972Society for Automotive EngineeringMinimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Self-Propelled Scrapers29 CFR 1926.1001(h)
SAE J320A1969Society of Automotive EngineersMinimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Self-Propelled Scrapers30 CFR 77.403-1(d)(1)(i)
SAE J3211970Society of Automotive EngineersFenders for Pneumatic-Tired Earthmoving Haulage Equipment29 CFR 1926.602(a)(5)
SAE J3331970Society for Automotive EngineeringOperation Protection for Wheel-Type Agricultural and Industry Tractors29 CFR 1926.602(a)(2)
SAE J3341968Society of Automotive EngineersProtective Frame Test Procedures and Performance Requirements30 CFR 77.403-1(d)(1)(vi)
SAE J3341970Society for Automotive EngineeringProtective Frame Test Procedures and Performance Requirements30 CFR 77.403-1(d)(1)(vi)
SAE J3861969Society of Automotive EngineersOperator Restraint Systems for Off-Road Work Machines29 CFR 1926.602(a)(2)
SAE J3861985Society for Automotive EngineeringOperator Restraint Systems for Off-Road Work Machines30 CFR 56.14130(h)
SAE J3861993Society of Automotive EngineersOperator Restraint Systems for Off-Road Work Machines30 CFR 56.14130(h)
SAE J3861997Society of Automotive EngineersOperator Restraint Systems for Off-Road Work Machines30 CFR 57.14131(c)
SAE J387 (pdf)
SAE J387 (html)
1987Society of Automotive EngineersTerminology: Motor Vehicle Lighting49 CFR 571
SAE J3941969Society of Automotive EngineersMinimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers30 CFR 77.403-1(d)(1)(ii)
SAE J3941972Society of Automotive EngineersMinimum Performance Criteria for Rollover Protective Structures for Wheeled Front-End Loaders and Wheeled Dozers30 CFR 77.403-1(d)(1)(ii)
SAE J3951969Society of Automotive EngineersMinimum Performance Criteria for Roll-Over Protective Structures for Crawler Tractors and Crawler-Type Loaders30 CFR 77.403-1(d)(1)(iii)
SAE J3961972Society for Automotive EngineeringMinimum Performance Criteria for Roll-Over Protective Structures for Motor Graders30 CFR 77.403-1(d)(1)(iv)
SAE J3971969Society of Automotive EngineersDeflection Limiting Volume-Protective Structures Laboratory Evaluation29 CFR 1926.1001(f)(1)(ii)
SAE J3971988Society of Automotive EngineersDeflection Limiting Volume-Protective Structures Laboratory Evaluation29 CFR 1910.266(f)(3)(iv)
SAE J4291971Society for Automotive EngineeringMechanical and Quality Requirements for Externally Threaded Fasteners30 CFR 77.403-1(d)(2)(iii)(B)
SAE J4291983Society of Automotive EngineersMechanical and Quality Requirements for Externally Threaded Fasteners46 CFR 58.30-15(c)
SAE J429D1967Society of Automotive EngineersMechanical and Quality Requirements for Externally Threaded Fasteners30 CFR 77.403-1(d)(2)(iii)(B)
SAE J449a1963Society of Automotive EngineersSurface Texture Control49 CFR 581.6(b)(1)
SAE J476a1961Society of Automotive EngineersDryseal Pipe Threads49 CFR 393.67(c)(3)
SAE J5271967Society of Automotive EngineersBrazed Double Wall Low Carbon Steel Tubing49 CFR 571.116 S6.13.3(b)
SAE J5331972Society of Automotive EngineersFlares for Tubing24 CFR 3280.703
SAE J5571968Society of Automotive EngineersHigh Tension Ignition Cable33 CFR 183.440(a)
SAE J5651969Society of Automotive EngineersSemi-Automatic Headlamp Beam Switching Devices49 CFR 571.108 S5.5.1
SAE J5661960Society of Automotive EngineersHeadlamp Mountings49 CFR 571.108
SAE J5711976Society of Automotive EngineersDimensional Specification for Sealed Beam Headlamp Units49 CFR 571.108
SAE J573d (pdf)
SAE J573d (html)
1968Society of Automotive EngineersRequirements for Lamp Bulbs and Sealed Units49 CFR 571
SAE J5751970Society of Automotive EngineersTest for Motor Vehicle Lighting Devices and Components49 CFR 571.108 S6.1
SAE J5751983Society for Automotive EngineeringTest for Motor Vehicle Lighting Devices and Components49 CFR 571.131 S6.2.3
SAE J5751988Society of Automotive EngineersTest for Motor Vehicle Lighting Devices and Components49 CFR 571.108 S7.5.8.3(e)
SAE J5761970Society of Automotive EngineersPlastic Materials for Use in Optical Parts, such as Lenses and Reflectors, of Motor Vehicle Lighting Devices49 CFR 571.108 S6.2
SAE J576 (pdf)
SAE J576 (html)
1991Society of Automotive EngineersPlastic Materials for Use in Optical Parts49 CFR 571
SAE J576B1966Society of Automotive EngineersPlastic Materials for Use in Optical Parts, such as Lenses and Reflectors, of Motor Vehicle Lighting Devices49 CFR 571.108 S6.2
SAE J578 (pdf)
SAE J578 (html)
1995Society of Automotive EngineersColor Specifications for Electric Signal Lighting Devices49 CFR 571.403
SAE J5841964Society of Automotive EngineersMotorcycle and Motor Driven Cycle Headlamps49 CFR 571.108 S7.9.1(a)
SAE J584 (pdf)
SAE J584 (html)
1993Society of Automotive EngineersRequirements for Motorcycle Headlamps49 CFR 571
SAE J5851970Society for Automotive EngineeringTail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less Than 2032 mm in Overall Width49 CFR 571.108 S5.8.8
SAE J5851977Society for Automotive EngineeringTail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less Than 2032 mm in Overall Width49 CFR 571.108 S5.1.1.6
SAE J5852000Society of Automotive EngineersTail Lamps (Rear Position Light)49 CFR 571.108 S6.1
SAE J5861970Society of Automotive EngineersStop Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width49 CFR 571.108 S5.8.3(b)
SAE J5861984Society for Automotive EngineeringStop Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width49 CFR 571.108 S6.1
SAE J5862000Society of Automotive EngineersStop Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width49 CFR 571.108 S6.1
SAE J586B1966Society of Automotive EngineersStop Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width49 CFR 571.108 S5.8.3(a)
SAE J587 (pdf)
SAE J587 (html)
1981Society of Automotive EngineersLicense Plate Lamps (Rear Registration Lamps)49 CFR 571
SAE J5881970Society for Automotive EngineeringTurn Signal Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width49 CFR 571.108 S5.1.1.1
SAE J5881970Society of Automotive EngineersTurn Signal Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width49 CFR 571.108 S5.8.4(b)
SAE J588 (pdf)
SAE J588 (html)
1984Society of Automotive EngineersRequirements for Turn Signal Lamps49 CFR 571
SAE J5882000Society of Automotive EngineersTurn Signal Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width49 CFR 393.25(c)
SAE J588D1966Society of Automotive EngineersTurn Signal Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width49 CFR 571.108 S5.8.4(a)
SAE J5921972Society of Automotive EngineersClearance, Side Marker and Identification Lamps49 CFR 571.108 Table III
SAE J592 (pdf)
SAE J592 (html)
1992Society of Automotive EngineersClearance, Side Marker, and Identification Lamps49 CFR 571
SAE J593C1968Society of Automotive EngineersBack-up Lamps49 CFR 571.108
SAE J594f (pdf)
SAE J594f (html)
1977Society of Automotive EngineersRequirements for Reflex Reflectors49 CFR 571
SAE J5991997Society of Automotive EngineersLighting Inspection Code49 CFR 581.5(c)(1)
SAE J602 (pdf)
SAE J602 (html)
1980Society of Automotive EngineersMechanically Aimable Sealed Beam Headlamps49 CFR 571
SAE J743A1964Society of Automotive EngineersTractor Mounted Side Boom29 CFR 1926.550(a)(18)
SAE J759 (pdf)
SAE J759 (html)
1995Society of Automotive EngineersLighting Identification Code49 CFR 571
SAE J800C1973Society of Automotive EngineersRecommended Practice, Motor Vehicle Seat Belt Installations49 CFR 571.209
SAE J8261962Society of Automotive EngineersDevices for Use in Defining and Measuring Vehicle Seating Accommodations49 CFR 571.3(b)
SAE J8261980Society for Automotive EngineeringDevices for Use in Defining and Measuring Vehicle Seating Accommodations49 CFR 571.214 S12.1.3(b)(1)
SAE J826 (pdf)
SAE J826 (html)
1995Society of Automotive EngineersDefining and Measuring Vehicle Seating Accommodation49 CFR 571
SAE J8391991Society of Automotive EngineersPassenger Car Side Door Latch System49 CFR 571.206
SAE J839B1965Society of Automotive EngineersPassenger Car Side Door Latch System49 CFR 571.201
SAE J8451997Society of Automotive EngineersOptical Warning Devices for Authorized Emergency, Maintenance and Service Vehicles49 CFR 393.25(e)
SAE J8871964Society of Automotive EngineersSchool Bus Red Signal Lamps49 CFR 571.108
SAE J902A1967Society of Automotive EngineersPassenger Car Windshield Defrosting Systems49 CFR 571.103
SAE J9341965Society of Automotive EngineersRecommended Practice for Vehicle Passenger Door Hinge Systems49 CFR 571.206
SAE J9421965Society of Automotive EngineersPassenger Car Windshield Washer System49 CFR 571.104
SAE J9441980Society for Automotive EngineeringSteering Control System-Passenger Car-Laboratory Test Procedure49 CFR 571.203 S5.1(a)
SAE J9451966Society of Automotive EngineersVehicular Hazard Warning Signal Flashers49 CFR 571.108 Table I
SAE J9591966Society of Automotive EngineersLifting Crane Wire-Rope Strength Factors29 CFR 1926.550(a)(7)(vi)
SAE J9641984Society for Automotive EngineeringTest Procedure for Determining Reflectivity of Rear View Mirrors49 CFR 571.111
SAE J9721966Society of Automotive EngineersMoving Barrier Collision Test49 CFR 571.105
SAE J9951967Society of Automotive EngineersMechanical and Quality Requirements for Steel Nuts30 CFR 77.403-1(d)(2)(iii)(B)
SAE J9951971Society of Automotive EngineersMechanical and Quality Requirements for Steel Nuts30 CFR 77.403-1(d)(2)(iii)(B)
SAE J10401994Society of Automotive EngineersPerformance Criteria for Rollover Protective Structures (ROPS) for Construction, Earthmoving, Forestry and Mining Machines30 CFR 56.14130(b)(1)
SAE J10631993Society of Automotive EngineersCantilevered Boom Crane Structures--Method of Test29 CFR 1926.1433(c)
SAE J11001984Society for Automotive EngineeringMotor Vehicle Dimensions49 CFR 571.3(b)
SAE J1100 (pdf)
SAE J1100 (html)
2001Society of Automotive EngineersMotor Vehicle Dimensions49 CFR 571
SAE J11271980Society for Automotive EngineeringBattery Cable33 CFR 183.430(a)(2)(ii)
SAE J11281975Society of Automotive EngineersLow Tension Primary Cable33 CFR 183.430(a)(2)(ii)
SAE J11331984Society for Automotive EngineeringSchool Bus Stop Arm49 CFR 571.131 S6.2.3
SAE J11511991Society of Automotive EngineersMethane Measurement Using Gas Chromatography40 CFR 86.111-94(b)(3)(vii)
SAE J11941983Society for Automotive EngineeringRoll-Over Protective Structures for Wheeled Agricultural Tractors30 CFR 56.14130(h)
SAE J11941994Society of Automotive EngineersRoll-Over Protective Structures for Wheeled Agricultural Tractors30 CFR 56.14130(h)
SAE J11941999Society of Automotive EngineersRoll-Over Protective Structures for Wheeled Agricultural Tractors30 CFR 57.14130(h)
SAE J12281991Society of Automotive EngineersSmall Craft-Marine Propulsion Engine and Systems-Power Measurements and Declarations40 CFR 91.115(a)
SAE J12921981Society of Automotive EngineersAutomobile, Truck, Truck-Tractor, Trailer, and Motor Coach Wiring49 CFR 393.28
SAE J13181986Society of Automotive EngineersGaseous Discharge Warning Lamp for Authorized Emergency, Maintenance, and Service Vehicles49 CFR 393.25(e)
SAE J1383 (pdf)
SAE J1383 (html)
1985Society of Automotive EngineersPerformance Requirements for Motor Vehicle Headlamps49 CFR 571
SAE J1395 (pdf)
SAE J1395 (html)
1985Society of Automotive EngineersTurn Signal Lamps for Use on Motor Vehicles49 CFR 571
SAE J1398 (pdf)
SAE J1398 (html)
1985Society of Automotive EngineersStop Lamps for Use on Motor Vehicles49 CFR 571
SAE J14751984Society for Automotive EngineeringHydraulic Hose Fittings for Marine Applications46 CFR 27.211(e)(2)(v)(B)
SAE J15271993Society of Automotive EngineersMarine Fuel Hoses33 CFR 183.540(a)
SAE J17031983Society for Automotive EngineeringMotor Vehicle Brake Fluid49 CFR 571.116 S6.5.4.1
SAE J1703 (pdf)
SAE J1703 (html)
1995Society of Automotive EngineersMotor Vehicle Brake Fluids49 CFR 571
SAE J1733 (pdf)
SAE J1733 (html)
1994Society of Automotive EngineersSign Convention for Vehicle Crash Testing49 CFR 572
SAE J18172001Society of Automotive EngineersLong Stroke Air Brake Actuator Marking49 CFR 393.47(e)
SAE J18501995Society of Automotive EngineersClass B Data Communication Network Interface40 CFR 86.099-17(h)(1)(i)
SAE J18502001Society of Automotive EngineersClass B Data Communication Network Interface40 CFR 86.1806-05(h)(1)(i)
SAE J18771994Society of Automotive EngineersRecommended Practice for Bar-Coded Vehicle Identification Number Label40 CFR 86.095-35(h)(2)(i)
SAE J18921993Society of Automotive EngineersRecommended Practice for Bar-Coded Vehicle Emission Configuration Label40 CFR 86.095-35(h)(2)(i)
SAE J19301993Society of Automotive EngineersElectrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms40 CFR 1039.135(c)(8)
SAE J19302002Society of Automotive EngineersElectrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms40 CFR 86.1806-05(h)(1)(v)
SAE J19371989Society of Automotive EngineersRecommended Practice for Engine Testing with Low Temperature Charge Air Cooler Systems in a Dynamometer Test Cell40 CFR 86.1330-90(b)(5)
SAE J19621995Society of Automotive EngineersDiagnostic Connector Equivalent to ISO/DIS40 CFR 86.094-17(h)(4)
SAE J19622002Society of Automotive EngineersDiagnostic Connector Equivalent to ISO/DIS 1503140 CFR 86.1806-05(h)(1)(iv)
SAE J19782002Society of Automotive EngineersOBD II Scan Tool Equivalent to ISO/DIS 15031-440 CFR 86.1806-05(h)(1)(vi)
SAE J19792002Society of Automotive EngineersE/E Diagnostic Test Modes40 CFR 86.1806-05(h)(1)(ii)
SAE J2009 (pdf)
SAE J2009 (html)
1993Society of Automotive EngineersDischarge Forward Lighting Systems49 CFR 571
SAE J20122002Society of Automotive EngineersDiagnostic Trouble Code Definitions40 CFR 86.1806-04(h)(1)(iii)
SAE J20402002Society of Automotive EngineersTail Lamps (Rear Position Lamps) for Use on Vehicles 2032 mm or More in Overall Width9 CFR 393.25(c)
SAE J22601996Society of Automotive EngineersNon-metallic Fuel System Tubing with One or More Layers40 CFR 1048.105(a)(2)
SAE J22612002Society of Automotive EngineersStop Lamps and Front- and Rear-Turn Signal Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width49 CFR 393.25(c)
SAE J25342002Society of Automotive EngineersRecommended Practice for Pass-Thru Vehicle Programming40 CFR 86.096-38(g)(17)(iv)
SCTE 262010Society of Cable Telecommunications EngineersHome Digital Network Interface Specification with Copy Protection47 CFR 76.640(b)(4)(iii)
SCTE 282007Society of Cable Telecommunications EngineersHost-POD Interface Standard47 CFR 15.123(b)(4)
SCTE 402004Society of Cable Telecommunications EngineersDigital Cable Network Interface Standard (2004)47 CFR 15.123(b)(2)
SCTE 402011Society of Cable Telecommunications EngineersDigital Cable Network Interface Standard (2011)47 CFR 15.123(b)(2)
SCTE 412011Society of Cable Telecommunications EngineersPOD Copy Protection System47 CFR 76.640(b)(2)(ii)
SCTE 542009Society of Cable Telecommunications EngineersDigital Video Service Multiplex and Transport System Standard for Cable Television47 CFR 15.123(b)(3)
SCTE 652008Society of Cable Telecommunications EngineersService Information Delivered Out-of-Band for Digital Cable Television47 CFR 76.640(b)(1)(ii)
SEAC1996Structural Engineers Association of CaliforniaRecommended Lateral Force Requirements and Commentary including Errata42 CFR 52b.12(c)(5)
SJI1994Steel Joist InstituteStandard Specification Load Tables and Weight Tables for Steel Joists and Joist Girders24 CFR 3280.304(b)(1)
SMACCNA HVAC (pdf)
SMACCNA HVAC (html)
SMACCNA HVAC (svg)
1985Sheet Metal and Air Conditioning Contractors National AssociationSMACNA: HVAC Air Duct Leakage Test Manual10 CFR 434.403.2.9.3
SMACCNA DUCT (pdf)
SMACCNA DUCT (html)
SMACCNA DUCT (svg)
1995Sheet Metal and Air Conditioning Contractors National AssociationSMACCNA: HVAC Duct Construction Standards -- Metal and Flexible (RS-34)10 CFR 434.403.2.9.3
SMACCNA GLASS (pdf)1992Sheet Metal and Air Conditioning Contractors National AssociationSMACCNA: Fibrous Glass Duct Construction Standards (RS-36)10 CFR 434.403.2.9.3
SMACCNA AIR (pdf)1978Sheet Metal and Air Conditioning Contractors National AssociationSMACCNA: Energy Recovery Equipment and Systems, Air-to-Air 10 CFR 440 Appendix A
NIST Handbook H-281942Department of CommerceHandbook of Screw-Thread Standards for Federal Service49 CFR 178.45(f)(5)(ii)
DOD AFTO 11A-1-471988Department of DefenseExplosive Hazard Classification Procedures49 CFR 173.56(b)(2)(i)
FedSpec RR-C-901D2003Department of TransportationCylinders, Compressed Gas: High Pressure, Steel DOT 3AA, and Aluminum Applications49 CFR 173.302(b)(3)
RTCA 23-631963Radio Technical Commission for AeronauticsStandard Adjustment Criteria for Airborne Localizer and Glide Slope Receivers14 CFR 91 App. A, 3(a)(1)
SNELL B-901998Snell Memorial FoundationStandard for Protective Headgear for Use in Bicycling16 CFR 1203.53(a)(4)
SNELL B-951998Snell Memorial FoundationStandard for Protective Headgear for Use in Bicycling16 CFR 1203.53(a)(7)
SRCC OG-3002008Solar Rating and Certification CorporationOperating Guidelines and Minimum Standards for Certifying Solar Water Heating Systems24 CFR 200.950(a)(1)
TPI1985Truss Plate InstituteDesign Specifications for Metal Plate Connected Wood Trusses24 CFR 3280.304(b)(1)
TTMA RP-611998Truck Trailer Manufacturers AssociationPerformance of Manhole and/or Fill Opening Assemblies49 CFR 180.405(g)(2)(i)
TTMA RP-811997Truck Trailer Manufacturers AssociationPerformance of Spring Loaded Pressure Relief Valves49 CFR 178.345-10(b)(3)(i)
TTMA RP-1071998Truck Trailer Manufacturers AssociationProcedure for Testing In-Service Unmarked and/or Uncertified MC 306 and Non-ASME MC 312 Type Cargo Tank Manhole49 CFR 180.405(g)(2)(i)
UL 171988Underwriters LaboratoriesVent or Chimney Connector Dampers for Oil-Fired Appliances10 CFR 440 Appendix A
UL 381993Underwriters LaboratoriesStandard for Manually Actuated Signaling Boxes for Use with Fire-Protective Signaling Systems46 CFR 161.002-4(b)(1)
UL 442002Underwriters LaboratoriesStandard for Thermoset-Insulated Wire and Cable46 CFR 110.10-1
UL 501995Underwriters LaboratoriesStandard for Enclosures for Electrical Equipment46 CFR 111.81-1(d)
UL 621997Underwriters LaboratoriesStandard for Flexible Cord and Fixture Wire46 CFR 110.10-1
UL 1271996Underwriters LaboratoriesFactory-Built Fireplaces24 CFR 3280
UL 142 (pdf)
UL 142 (html)
1968Underwriters LaboratoriesSteel Above Ground Tanks for Flammable and Combustible Liquids49 CFR 1910
UL 1741989Underwriters LaboratoriesHousehold Electric Storage Tank Water Heaters46 CFR 63.25-3(a)
UL 2171993Underwriters LaboratoriesSingle and Multiple Station Smoke Detectors46 CFR 181.450(a)(1)
UL 486A1990Underwriters LaboratoriesWire Connections and Soldering Lugs for Use With Copper Conductors46 CFR 175.600
UL 5211993Underwriters LaboratoriesHeat Detectors for Fire Protective Signaling Systems46 CFR 161.002-4(b)(1)
UL 7271994Underwriters LaboratoriesOil-Fired Central Furnaces10 CFR 431.76(c)(1)
UL 746C1995Underwriters LaboratoriesPolymeric Material--Use in Electrical Equipment Evaluations16 CFR 1211.10(e)(2)
UL 9131988Underwriters LaboratoriesIntrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III Division 1, Hazardous (Classified) Locations46 CFR 111.105-11(a)
UL 9911995Underwriters LaboratoriesTests for Safety-Related Controls Employing Solid-State Devices16 CFR 1211.4(c)
UL 10421995Underwriters LaboratoriesElectric Baseboard Heating Equipment24 CFR 3280.703
UL 10721995Underwriters LaboratoriesStandard for Medium-Voltage Power Cables46 CFR 111.60-1(e)
UL 10961986Underwriters LaboratoriesElectrical Central Air Heating Equipment24 CFR 3280.703
UL 11041983Underwriters LaboratoriesStandard for Marine Navigation Lights46 CFR 120.420
UL 14261986Underwriters LaboratoriesCables for Boats33 CFR 183.435(a)(4)
UL 15701995Underwriters LaboratoriesFluorescent Lighting Fixtures46 CFR 183.410(d)
UL 15711995Underwriters LaboratoriesIncandescent Lighting Fixtures46 CFR 111.75-20(e)
UL 15721995Underwriters LaboratoriesHigh Intensity Discharge Lighting Fixtures46 CFR 120.410(d)
UL 15741995Underwriters LaboratoriesTrack Lighting Systems46 CFR 111.75-20(e)
UL 19951995Underwriters LaboratoriesHeating and Cooling Equipment, Second Edition, with 1999 revisions24 CFR 3280.4
UN ECE1996United Nations Economic Commission of EuropeUniform Provisions Concerning the Approval of Vehicles with Regard to the Installation of Lighting and Light-Signaling Devices49 CFR 571.108
UN ESC2009United Nations Economic and Social CouncilRecommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria49 CFR 173.128(c)(3)
UN ESC2005United Nations Economic and Social CouncilRecommendations on the Transport of Dangerous Goods49 CFR 173.40(d)(2)
FAO 41995UN Food and Agriculture OrganizationRequirements for the Establishment of Pest-free Areas7 CFR 319.56
IAEA Circular 2251999International Atomic Energy AgencyPhysical Protection of Nuclear Material and Nuclear Facilities10 CFR 110.44(b)(1)
IAEA TS-R-12009International Atomic Energy AgencyRegulations for the Safe Transport of Radioactive Material49 CFR 171.23
IMO Resolution A.2641960International Maritime OrganizationAmendment to Chapter VI of the International Convention for the Safety of Life at Sea46 CFR 172.015(a)(2)
IMO Resolution A.2651973International Maritime OrganizationCarriage of Grain46 CFR 170.135(a)
IMO Resolution A.3421975International Maritime OrganizationRecommendations on Performance Standards for Automatic Pilots33 CFR 164.13(d)(1)
IMO Resolution A.4141979International Maritime OrganizationCode for Construction and Equipment of Mobile Offshore Drilling Units33 CFR 143.207(c)
IMO Resolution A.5201983International Maritime OrganizationCode of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life-Saving Appliances and Arrangements46 CFR 108.105(c)(1)
IMO Resolution A.5251983International Maritime OrganizationPerformance Standards for Narrow-band Direct Printing Telegraph Equipment for the Reception of Navigational and Meteorological Warnings47 CFR 80.1101(c)(1)(i)
IMO Resolution A.6011987International Maritime OrganizationProvision and Display of Manoeuvering Information on Board Ships33 CFR 157.450
IMO Resolution A.6491991International Maritime OrganizationCode for the Construction and Equipment of Mobile Offshore Drilling Units (MODU Code)46 CFR 108.503
IMO Resolution A.6541989International Maritime OrganizationGraphical Symbols for Fire Control Plans46 CFR 109.563(a)(6)
IMO Resolution A.6571989International Maritime OrganizationInstructions for Action in Survival Craft46 CFR 160.151-21(v)(3)
IMO Resolution A.6581989International Maritime OrganizationUse and Fitting of Retro-Reflective Materials on Life-Saving Appliances46 CFR 108.645(a)(4)
IMO Resolution A.6621989International Maritime OrganizationPerformance Standards for Float-Free Release and Activation Arrangements for Emergency Radio Equipment47 CFR 80.1101(c)(11)(ii)
IMO Resolution A.6641989International Maritime OrganizationPerformance Standards for Enhanced Group Call Equipment47 CFR 80.1101(c)(10)
IMO Resolution A.6881991International Maritime OrganizationFire Test Procedures for Ignitability of Bedding Components46 CFR 116.405(j)(2)
IMO Resolution A.6891996International Maritime OrganizationRecommendation on Testing Life-Saving Appliances46 CFR 160.151-21(f)
IMO Resolution A.6941991International Maritime OrganizationGeneral Requirements for Shipborne Radio Equipment Forming Part of the Global Maritime Distress and Safety System and for Electronic Navigational Aids47 CFR 80.1101(b)(1)
IMO Resolution A.7001991International Maritime OrganizationPerformance Standards for Narrow-band Direct-printing Telegraph Equipment for the Reception of Navigational and Meteorological Warnings and Urgent Information to Ships47 CFR 80.1101(c)(4)(iv)
IMO Resolution A.7391993International Maritime OrganizationGuidelines for the Authorization of Organizations Acting on Behalf of the Administration33 CFR 96.440(a)(12)
IMO Resolution A.7411993International Maritime OrganizationInternational Management Code for the Safe Operation of Ships and for Pollution Prevention33 CFR 96.220(b)
IMO Resolution A.7441993International Maritime OrganizationGuidelines on the Enhanced Program of Inspections During Surveys of Bulk Carriers and Oil Tankers33 CFR 157.430(a)
IMO Resolution A.7511994International Maritime OrganizationInterim Standards for Ship Manoeuverability33 CFR 157.445(a)
IMO Resolution A.7531993International Maritime OrganizationGuidelines for the Application of Plastic Pipe on Ships46 CFR 56.60-25(a)
IMO Resolution A.7601993International Maritime OrganizationSymbols Related to Life-Saving Appliances and Arrangements46 CFR 108.646(a)
IMO Resolution A.7881995International Maritime OrganizationGuidelines on Implementation of the International Safety Management (ISM) Code by Administrations33 CFR 96.320(c)(2)
IMO Resolution A.8021995International Maritime OrganizationPerformance Standards for Survival Craft Radar Transponders for Use in Search and Rescue Operations47 CFR 80.1101(c)(6)(i)
IMO Resolution A.8031995International Maritime OrganizationPerformance Standards for Shipborne VHF Radio Installations Capable of Voice Communication and Digital Selective Calling47 CFR 80.1101(c)(2)(i)
IMO Resolution A.8041995International Maritime OrganizationPerformance Standards for Shipborne MF Radio Installations Capable of Voice Communication and Digital Selective Calling47 CFR 80.1101(c)(3)(i)
IMO Resolution A.8061995International Maritime OrganizationPerformance Standards for Shipborne MF/HF Radio Installations Capable of Voice Communication, Narrow-Band Direct Printing and Digital Selective Calling47 CFR 80.1101(c)(4)(i)
IMO Resolution A.8071995International Maritime OrganizationPerformance Standards for INMARSAT Standard-C Ship Earth Stations Capable of Transmitting and Receiving Direct-Printing Communications47 CFR 80.1101(c)(9)
IMO Resolution A.8081995International Maritime OrganizationPerformance Standards for Ship Earth Stations Capable of Two-Way Communications47 CFR 80.1101(c)(8)
IMO Resolution A.8091995International Maritime OrganizationPerformance Standards for Survival Craft Two-Way VHF Radiotelephone Apparatus47 CFR 80.1101(c)(7)(i)
IMO Resolution A.8101995International Maritime OrganizationPerformance Standards for Float-free Satellite Emergency Position-Indicating Radio Beacons (EPIRBs) Operating on 406 MHz47 CFR 80.1101(c)(5)(i)
IMO Resolution A.8121995International Maritime OrganizationPerformance Standards for Float-Free Satellite EPIRBs Operating Through the Geostationary INMARSAT Satellite System on 1.6 GHz47 CFR 80.1101(c)(11)(i)
USEC 6511995United States Enrichment CorporationGood Handling Practices for Uranium Hexafluoride49 CFR 173.417(a)(3)(i)
USPHS 9341962U.S. Public Health ServiceFood Service Sanitation Ordinance and Code29 CFR 1910.142(i)(1)
USPHS 9561962U.S. Public Health ServiceDrinking Water Standards46 CFR 160.026-4(a)
USPHS 9341962U.S. Public Health ServiceFood Service Sanitation Ordinance and Code29 CFR 1910.142(i)(1)
USPHS 92003U.S. Public Health ServiceThe Ships Medicine Chest and Medical Aid at Sea33 CFR 143.405(a)(15)
WCLIB R172004West Coast Lumber Inspection BureauGrading Rules for West Coast Lumber7 CFR 1728.201(f)(1)(i)
WHO1973World Health OrganizationLaboratory Techniques in Rabies9 CFR 113.209(d)(3)
WIPO ST.252001World Intellectual Property OrganizationHandbook on Industrial Property Information and Documentation37 CFR 1.821(a)(1)
WQA S-1001985Water Quality AssociationWater Softeners24 CFR 200, Subpart S
WQA S-2001988Water Quality AssociationWater Filters24 CFR 200, Subpart S
WQA S-3001984Water Quality AssociationPoint-of-Use, Low Pressure Reverse Osmosis Drinking Water Systems24 CFR 200, Subpart S
WQA S-4001986Water Quality AssociationPoint-of-Use Distillation Drinking Water Systems24 CFR 200, Subpart S
WSTDA T-12005Web Sling and Tiedown AssociationRecommended Standard Specification for Synthetic Web Tiedowns49 CFR 393.104(e)(3)

Last Updated: December 31, 2012


Published by Public.Resource.Org