001#3m.EPA_608.1995.pdf#1995#3M Corporation#3M 0222: Organochlorine Pesticides and PCBs in Wastewater Using Empore Disk#40 CFR 136.3(a) Table ID
001#aa.construct.manual.1967.pdf#1967#Aluminum Association#AA: Aluminum Construction Manual#24 CFR 200, Subpart S
001#aama.101-IS2.1997.pdf#1997#American Architectural Manufacturers Association#AAMA 101-IS2: Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors#10 CFR 434.402.2.2.4
001#aama.605.1998.pdf#1998#American Architectural Manufacturers Association#AAMA 605: Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminum Extrusions and Panels#40 CFR 59.401
001#aama.1002.10.1993.pdf#1993#American Architectural Manufacturers Association#AAMA 1002.10: Aluminum Insulating Products for Windows and Sliding Glass Doors#24 CFR 200.938
001#aama.1102.7.1989.pdf#1989#American Architectural Manufacturers Association#AAMA 1102.7: Voluntary Specifications for Aluminum Storm Doors#10 CFR 440 Appendix A
001#aama.1503.1.1988.pdf#1988#American Architectural Manufacturers Association#AAMA 1503.1: Voluntary Test Method for Thermal Transmittance and Condensation Resistance of Windows, Doors and Glazed Wall Sections#24 CFR 3280.508(e)
001#aama.1702.2.1995.pdf#1995#American Architectural Manufacturers Association#AAMA 1702.2: Swinging Exterior Passage Doors Voluntary Standard for Utilization in Manufactured-Housing#24 CFR 3280.405(e)(2)
001#aama.1704.1985.pdf#1985#American Architectural Manufacturers Association#AAMA 1704: Voluntary Standard Egress Window Systems for Utilization in Manufactured-Housing#24 CFR 3280.404(b)
001#aamd.classification.1973.pdf#1973#American Association on Mental Deficiency#AAMD: Classification in Mental Retardation#42 CFR 483.102(b)(3)(i)
001#aamva.CDLIS.2.0.1998.pdf#1998#American Association of Motor Vehicle Administrators#AAMVA CDLIS.2.0: Commercial Driver License Information System (CDLIS) State Procedures#49 CFR 384.231(d)
001#aashto.bridges.1973.pdf#1973#American Association of State Highway and Transportation Officials#AASHTO: Standard Specifications for Highway Bridges#24 CFR 200, Subpart S
001#aashto.utilities.2005.pdf#2005#American Association of State Highway and Transportation Officials#AASHTO: A Guide for Accommodating Utilities Within Highway Right-of-Way#23 CFR 645.211
001#aatc.tm.118.1997.pdf#1997#American Association of Textile Chemists and Colorists#AATCC 118: Oil Repellency: Hydrocarbon Resistance Test#10 CFR 430 Subpart B
001#aatc.tm.124.1996.pdf#1996#American Association of Textile Chemists and Colorists#AATCC 124: Appearance of Durable Press Fabrics After Repeated Home Laundering#16 CFR 1631.62(a)
001#abyc.A-01.1993.pdf#1993#American Boat and Yacht Council#ABYC A-01: Marine Liquified Petroleum Gas Systems#46 CFR 184.240(a)
001#abyc.A-07.1973.pdf#1973#American Boat and Yacht Council#ABYC A-07: Boat Heating Systems#46 CFR 184.200
001#abyc.A-16.1997.pdf#1997#American Boat and Yacht Council#ABYC A-16: Electric Navigation Lights#46 CFR 25.10-3(a)(2)
001#abyc.A-22.1993.pdf#1993#American Boat and Yacht Council#ABYC A-22: Marine Compressed Natural Gas Systems#46 CFR 184.240(b)
001#abyc.E-01.1973.pdf#1973#American Boat and Yacht Council#ABYC E-01: Bonding of Direct Current Systems#46 CFR 28.345(b)
001#abyc.E-09.1990.pdf#1990#American Boat and Yacht Council#ABYC E-09: Direct Current (DC) Electrical Systems on Boats#46 CFR 183.340(b)(4)
001#abyc.H-02.1989.pdf#1989#American Boat and Yacht Council#ABYC H-02: Ventilation of Boats Using Gasoline#46 CFR 28.340(c)
001#abyc.H-22.1986.pdf#1986#American Boat and Yacht Council#ABYC H-22: DC Electric Bilge Pumps Operating Under 50 Volts#46 CFR 182.500(b)
001#abyc.H-24.1993.pdf#1993#American Boat and Yacht Council#ABYC H-24: Gasoline Fuel Systems#46 CFR 182.455(c)
001#abyc.H-25.1994.pdf#1994#American Boat and Yacht Council#ABYC H-25: Portable Gasoline Fuel Systems for Flammable Liquids#46 CFR 182.130
001#abyc.H-32.1987.pdf#1987#American Boat and Yacht Council#ABYC H-32: Ventilation of Boats Using Diesel Fuel#46 CFR 182.470(c)
001#abyc.H-33.1989.pdf#1989#American Boat and Yacht Council#ABYC H-33: Diesel Fuel Systems#46 CFR 182.130
001#abyc.P-01.1993.pdf#1993#American Boat and Yacht Council#ABYC P-01: Safe Installation of Exhaust Systems for Propulsion and Auxiliary Engines#46 CFR 182.130
001#abyc.P-04.1989.pdf#1989#American Boat and Yacht Council#ABYC P-04: Marine Inboard Engines#46 CFR 182.420(b)
001#acgih.guidelines.1987.pdf#1987#American Conference of Governmental Industrial Hygienists#ACGIH: Guidelines for the Selection of Chemical Protective Clothing, Third Edition#46 CFR 153.933(a)
001#acgih.manual.1998.pdf#1998#American Conference of Governmental Industrial Hygienists#ACGIH: Industrial Ventilation Manual#40 CFR 63.2984(e)
001#aci.318.1995.pdf#1995#American Concrete Institute#ACI 318: Building Code Requirements for Reinforced Concrete#30 CFR 250.901(d)(1)
001#aci.manual.1.1980.pdf#1980#American Concrete Institute#ACI: Manual of Concrete Practice, Part 1#24 CFR 200, Subpart S
001#acri.210-240.2003.pdf#2003#Air Conditioning and Refrigeration Institute#ACRI 210-240: Unitary Air-Conditioning and Air-Source Heat Pump Equipment#10 CFR 431.96
001#acri.340-360.2004.pdf#2004#Air Conditioning and Refrigeration Institute#ACRI 340-360: Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment#10 CFR 434.403
001#acri.365.1994.pdf#1994#Air Conditioning and Refrigeration Institute#ACRI 365: Commercial and Industrial Unitary Air-Conditioning Condensing Units#10 CFR 434.403
001#acri.1200.2006.pdf#2006#Air Conditioning and Refrigeration Institute#ACRI 1200: Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets#10 CFR 431.66(a)(3)
001#afpa.nds.2001.pdf#2001#American Forest and Paper Association#AFPA: National Design Specification for Wood Construction With Supplemental Design Values for Wood Construction#24 CFR 3280.304(b)(1)
001#aga.3.1.1990.pdf#1990#American Gas Association#AGA 3.1: Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids: Part 1#40 CFR 75, Appendix D
001#aga.purging.2001.pdf#2001#American Gas Association#AGA: Purging Principles and Practices#49 CFR 193.2615
001#aha.a135.4.1995.pdf#1995#American Hardboard Association#AHA A135.4: Basic Hardboard#24 CFR 3280.304(b)(1)
001#aha.a135.5.1995.pdf#1995#American Hardboard Association#AHA A135.5: Prefinished Hardboard Paneling#24 CFR 3280.304(b)(1)
001#aha.a135.6.1998.pdf#1998#American Hardboard Association#AHA A135.6: Hardboard Siding#24 CFR 3280.304(b)(1)
001#aham.DW-1.1992.pdf#1992#Association of Home Appliance Manufacturers#AHAM DW-1: Household Electric Dishwashers#10 CFR 430 Subpart B
001#aham.HLD-1.1974.pdf#1974#Association of Home Appliance Manufacturers#AHAM HLD-1: Performance Evaluation Procedure for Household Tumble Type Clothes Dryers#10 CFR 430 Subpart B
001#aham.HRF-1.1979.pdf#1979#Association of Home Appliance Manufacturers#AHAM HRF-1: Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers#10 CFR 430 Subpart B
001#ahpa.herbs.1992.pdf#1992#American Herbal Products Association#AHPA: Herbs of Commerce#21 CFR 101.4(h)
001#aiim.ms41.1996.pdf#1996#Association for Information and Image Management#AIMM MS41: Dimensions of Unitized Microfilm Carriers and Apertures (Aperture, Camera, Copy and Image Cards)#36 CFR 1238.10(a)(1)
001#aimm.it2.18.1996.pdf#1996#Association for Information and Image Management#AIMM IT2.18: Photography--Density Measurements--Part 3: Spectral Conditions#36 CFR 1238.14(d)(2)
001#aimm.it9.2.1998.pdf#1998#Association for Information and Image Management#AIMM/PIMA IT9.2:Photographic Processed Films, Plates, and Papers--Filing Enclosures and Storage Containers#36 CFR 1238.10(a)(1)
001#aimm.it9.11.1998.pdf#1998#Association for Information and Image Management#AIMM/PIMA IT9.11: Imaging Materials--Processed Safety Photographic Film--Storage#36 CFR 1234.14(b)(1)
001#aimm.it9.23.1996.pdf#1996#Association for Information and Image Management#AIMM IT9.23: Imaging Materials--Polyester Based Magnetic Tape--Storage#36 CFR 1234.14(b)(2)
001#aimm.it9.25.1998.pdf#1998#Association for Information and Image Management#AIMM/PIMA IT9.25: Imaging Materials--Optical Disc Media--Storage#36 CFR 1234.14(b)(3)
001#aimm.ms1.1996.pdf#1996#Association for Information and Image Management#AIMM MS1: Recommended Practice for Alphanumeric Computer-Output Microforms--Operational Practices for Inspection and Quality Control#36 CFR 1238.14(c)
001#aimm.ms5.1992.pdf#1992#Association for Information and Image Management#AIMM MS5: Microfiche#36 CFR 1238.10(b)
001#aimm.ms14.1996.pdf#1996#Association for Information and Image Management#AIMM MS14: Specifications for 16mm and 35mm Roll Microfilm#36 CFR 1238.10(a)(1)
001#aimm.ms19.1993.pdf#1993#Association for Information and Image Management#AIMM MS19: Standard Recommended Practice--Identification of Microforms#36 CFR 1238.12(c)
001#aimm.ms23.1998.pdf#1998#Association for Information and Image Management#AIMM MS23: Standard Recommended Practice--Production, Inspection, and Quality Assurance of First-Generation, Silver Microforms of Documents#36 CFR 1238.14(d)(2)
001#aimm.ms32.1996.pdf#1996#Association for Information and Image Management#AIMM MS32: Microrecording of Engineering Source Documents on 35 mm Microfilm#36 CFR 1238.10(a)(1)
001#aimm.ms43.1998.pdf#1998#Association for Information and Image Management#AIMM MS43: Standard Recommended Practice--Operational Procedures--Inspection and Quality Control of Microfilms and Documents#36 CFR 1238.14(d)(1)(i)
001#aimm.ms45.1990.pdf#1990#Association for Information and Image Management#AIMM MS45: Recommended Practice for Inspection of Stored Silver-Gelatin Microforms for Evidence of Deterioration#36 CFR 1238.22(d)(1)
001#aimm.tr-34.1996.pdf#1996#Association for Information and Image Management#AIMM TR34: Sampling Procedures for Inspection by Attributes of Images in Electronic Image Management and Micrographic Systems#36 CFR 1237.28(d)(2)
001#alcide.980342ea.1995.pdf#1995#Alcide Corporation#ALCIDE 980342EA: Determination of Sodium Chlorite: 50 ppm to 1500 ppm concentration#21 CFR 173.325(g)
001#amca.210.1999.pdf#1999#Air Movement and Control Association#AMCA 210: Laboratory Methods of Testing Fans for Ratings#10 CFR 430 Subpart B, App. M
002#ansi.a10.3.1970.pdf#1970#American National Standards Institute#ANSI A10.3: Safety Requirements for Powder Actuated Fastening Systems#29 CFR 1926
002#ansi.a10.4.1963.pdf#1963#American National Standards Institute#ANSI A10.4: Safety Requirements for Workmen's Hoists#29 CFR 1926
002#ansi.a10.5.1969.pdf#1969#American National Standards Institute#ANSI A10.5: Safety Requirements for Material Joists#29 CFR 1926
002#ansi.a14.1.1990.pdf#1990#American National Standards Institute#ANSI A14.1: Ladders--Wood--Safety Requirements#29 CFR 1917
002#ansi.a14.2.1990.pdf#1990#American National Standards Institute#ANSI A14.2: Ladders--Portable Metal--Safety#29 CFR 1917
002#ansi.a92.2.1969.pdf#1969#American National Standards Institute#ANSI A92.2: Vehicle Mounted Elevating and Rotating Work Platforms#29 CFR 453
002#ansi.b7.1.1970.pdf#1970#American National Standards Institute#ANSI B7.1: Safety Code for the Use, Care, and Protection of Abrasive Wheels#29 CFR 1926
002#ansi.b20.1.1957.pdf#1957#American National Standards Institute#ANSI B20.1: Safety Code for Conveyors, Cableways, and Related Equipment#29 CFR 1926
002#ansi.b30.6.1969.pdf#1969#American National Standards Institute#ANSI B30.6: Safety Code for Derricks#29 CFR 1926
002#ansi.b56.1.1969.pdf#1969#American National Standards Institute#ANSI B56.1: Safety Standard for Powered Industrial Trucks#29 CFR 1926
002#ansi.n14.1.2001.pdf#2001#American National Standards Institute#ANSI N14.1: Packaging of Uranium Hexafluoride for Transport#49 CFR 173.420(a)(1)
002#ansi.o1.1.1961.pdf#1961#American National Standards Institute#ANSI O1.1: Safety Code for Woodworking Machinery#29 CFR 1926
002#ansi.s3.22.2003.pdf#2003#American National Standards Institute#ANSI S3.22: Specification of Hearing Aid Characteristics#21 CFR 801
002#ansi.z35.1.1968.pdf#1968#American National Standards Institute#ANSI Z35.1: Specifications for Accident Prevention Signs#29 CFR 1926
002#ansi.z35.2.1968.pdf#1968#American National Standards Institute#ANSI Z35.2: Specifications for Accident Prevention Tags#29 CFR 1926
002#ansi.z49.1.1967.pdf#1967#American National Standards Institute#ANSI Z49.1: Safety in Welding and Cutting#29 CFR 1926
002#ansi.z87.1.2003.pdf#2003#American National Standards Institute#ANSI Z87.1: Practice for Occupational and Educational Eye and Face Protection#29 CFR 1910
002#ansi.z88.2.1992.pdf#1992#American National Standards Institute#ANSI Z88.2: American National Standard for Respiratory Protection#30 CFR 250
002#ansi.z89.1.1969.pdf#1969#American National Standards Institute#ANSI Z89.1: Safety Requirements for Industrial Head Protection#29 CFR 1926
002#ansi.z89.2.1971.pdf#1971#American National Standards Institute#ANSI Z89.2: Industrial Protective Helmets for Electrical Workers#29 CFR 1926
002#ansi.z90.4.1984.pdf#1984#American National Standards Institute#ANSI Z90.4: Protective Headgear for Bicyclists#16 CFR 1203
002#ansi.z245.1.1992.pdf#1992#American National Standards Institute#ANSI Z245.1: Mobile Refuse Collection and Compaction--Safety Requirements#40 CFR 243
002#ansi.z245.2.1997.pdf#1997#American National Standards Institute#ANSI Z245.2: Stationary Compactors--Safety Requirements#40 CFR 243
002#aoac.methods.1980.pdf#1980#AOAC International#AOAC: Official Methods of Analysis, 1980#21 CFR 131.150(c)
002#apa.87-1.2001.pdf#2001#American Pyrotechnics Association#APA 87-1: Standard for Construction and Approval for Transportation of Fireworks and Novelties#49 CFR 173.56(j)(1)
002#api.2int-met.2007.pdf#2007#American Petroleum Institute#API 2INT-MET: Interim Guidance on Hurricane Conditions in the Gulf of Mexico#30 CFR 250.901(a)(6)
002#api.5l.2004.pdf#2004#American Petroleum Institute#API 5L: Specification for Line Pipe#49 CFR 192.113
002#api.6a.2004.pdf#2004#American Petroleum Institute#API 6A: Specification for Wellhead and Christmas Tree Equipment#30 CFR 250.806(a)(3)
002#api.14c.2001.pdf#2001#American Petroleum Institute#API RP 14C: Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms#30 CFR 250.1628(c)
002#api.14f.2008.pdf#2008#American Petroleum Institute#API RP 14F: Recommended Practice for Design and Installation of Electrical Systems for Offshore Production Platforms#30 CFR 250.114(c)
002#api.17j.2008.pdf#2008#American Petroleum Institute#API 17J: Specification for Unbonded Flexible Pipe#30 CFR 250.1002(b)(4)
002#api.510.2006.pdf#2006#American Petroleum Institute#API 510: Pressure Vessel Inspection Code#30 CFR 250.803(b)(1)
002#api.620.2002.pdf#2002#American Petroleum Institute#API 620: Design and Construction of Large Welded Low Pressure Storage Tanks#49 CFR 195.264(e)(3)
002#api.653.2003.pdf#2003#American Petroleum Institute#API 653: Tank Inspection, Repair, Alteration, and Reconstruction#49 CFR 195.432(b)
002#api.1104.1999.pdf#1999#American Petroleum Institute#API 1104: Standard for Welding Pipelines and Related Facilities#49 CFR 195.214(a)
002#api.1130.2002.pdf#2002#American Petroleum Institute#API 1130: Computational Pipeline Monitoring#49 CFR 195.444
002#api.2510.2001.pdf#2001#American Petroleum Institute#API 2510: Design and Construction of LPG Installations#49 CFR 195.205(b)(3)
002#api.rp14g.2007.pdf#2007#American Petroleum Institute#API RP 14G: Recommended Practice for Fire Prevention and Control on Open Type Offshore Production Platforms#30 CFR 250.803(b)(9)(v)
002#aplic.raptor.1996.pdf#1996#Avian Power Line Interaction Committee#APLIC: Suggested Practices for Raptor Protection on Power Lines: The State of the Art in 1996#7 CFR 1724.52(a)(1)(i)
002#arma.manual.1984.pdf#1984#Asphalt Roofing Manufacturers Association#ARMA Residential Asphalt Roofing Manual#24 CFR 200, Subpart S
002#ashrae.fundamentals.1993.pdf#1993#American Society of Heating, Refrigerating and Air Conditioning Engineers#ASHRAE: Fundamentals#10 CFR 434.402.2.2.5(a)
002#asme.b30.2.2005.pdf#2005#American Society of Mechanical Engineers#ASME B30.2: Safety Requirements for Overhead and Gantry Cranes#29 CFR 1926
002#asme.b30.5.2004.pdf#2004#American Society of Mechanical Engineers#ASME B30.5: Safety Requirements for Mobile and Locomotive Cranes#29 CFR 1926
002#asme.b30.7.2001.pdf#2001#American Society of Mechanical Engineers#ASME B30.7: Safety Requirements for Base-Mounted Drum Hoists#29 CFR 1926
002#asme.b30.14.2004.pdf#2004#American Society of Mechanical Engineers#ASME B30.14: Safety Requirements for Side Boom Tractors#29 CFR 1926
002#asqc.q9001.1994.pdf#1994#American Society for Quality Control#ASQC Q9001: Quality Assurance in Design, Development, Production, Installation, and Servicing#33 CFR 96.430(a)(2)(ii)
002#asqc.q9002.1994.pdf#1994#American Society for Quality Control#ASQC Q9002: Quality Systems -- Model for Quality Assurance in Production, Installation, and Servicing#24 CFR 200.935(d)(4)(ii)(A)(3)
002#asqc.q9003.1994.pdf#1994#American Society for Quality Control#ASQC Q9003: Quality Systems - Model for Quality Assurance in Final Inspection and Test#24 CFR 200.935(d)(4)(ii)(A)(4)
002#asqc.q9004-1.1994.pdf#1994#American Society for Quality Control#ASQC Q9004-1: Quality Management and Quality Systems Elements-Guidelines#24 CFR 200.935(d)(4)(ii)(A)(5)
002#asse.1001.1990.pdf#1990#American Society of Sanitary Engineering#ASSE 1001: Performance Requirements for Pipe Applied Atmospheric Type Vacuum Breakers#24 CFR 3280.604(b)(2)
002#asse.1006.1986.pdf#1986#American Society of Sanitary Engineering#ASSE 1006: Plumbing Requirements for Residential Use (Household) Dishwashers#24 CFR 3280.604(b)(2)
002#asse.1007.1986.pdf#1986#American Society of Sanitary Engineering#ASSE 1007: Performance Requirements for Home Laundry Equipment#24 CFR 3280.604(b)(2)
002#asse.1008.1986.pdf#1986#American Society of Sanitary Engineering#ASSE 1008: Performance Requirements for Household Food Waste Disposer Units#24 CFR 3280.604(b)(2)
002#asse.1023.1979.pdf#1979#American Society of Sanitary Engineering#ASSE 1023: Hot Water Dispensers, Household Storage Type, Electrical#24 CFR 3280.604(b)(2)
002#asse.1037.1990.pdf#1990#American Society of Sanitary Engineering#ASSE 1037: Performance Requirements for Pressurized Flushing Devices (Flushometers) for Plumbing Fixtures#24 CFR 3280.604(b)(2)
003#astm.c150.2007.pdf#2007#American Society for Testing and Materials#ASTM C150: Standard Specification for Portland Cement#30 CFR 250.901(d)(9)
003#astm.c177.2004.pdf#2004#American Society for Testing and Materials#ASTM C177: Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded Hot-Plate Apparatus#16 CFR 460.5(a)
003#astm.d86.2007.pdf#2007#American Society for Testing and Materials#ASTM D86: Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure#40 CFR 1065.710
003#astm.d129.2000.pdf#2000#American Society for Testing and Materials#ASTM D129: Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)#40 CFR 60.335(b)(10)(i)
003#astm.d396.2002.pdf#2002#American Society for Testing and Materials#ASTM D396: Standard Specification for Fuel Oils#40 CFR 63.7575
003#astm.d975.2007.pdf#2007#American Society for Testing and Materials#ASTM D975: Standard Specification for Diesel Fuel Oils#40 CFR 1065.701
003#astm.d1126.2002.pdf#2002#American Society for Testing and Materials#ASTM D1126: Standard Test Method for Hardness in Water#40 CFR 136
003#astm.d1246.1995.pdf#1995#American Society for Testing and Materials#ASTM D1246: Bromide - Titrimetric#40 CFR 136.3(a) Table IB
003#astm.d1253.1986.pdf#1986#American Society for Testing and Materials#ASTM D1253: Standard Test Method for Residual Chlorine in Water#21 CFR 165.110(b)(4)(iii)(I)(5)(i)
003#astm.d1253.2003.pdf#2003#American Society for Testing and Materials#ASTM D1253: Standard Test Method for Residual Chlorine in Water#40 CFR 136.3(a) Table IB
003#astm.d1319.2003.pdf#2003#American Society for Testing and Materials#ASTM D1319: Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption#40 CFR 80.2(z)
003#astm.d1687.1992.pdf#1992#American Society for Testing and Materials#ASTM D1687: Standard Test Methods for Chromium in Water#40 CFR 444.12(b)(1)
003#astm.d1688.1995.pdf#1995#American Society for Testing and Materials#ASTM D1688: Standard Test Method for Copper in Water#40 CFR 141.23(k)(1)
003#astm.d2777.1998.pdf#1998#American Society for Testing and Materials#ASTM D2777: Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D-19 on Water#46 CFR 162.050-15(f)(1)
003#astm.d3559.2003.pdf#2003#American Society for Testing and Materials#ASTM D3559: Standard Test Methods for Lead in Water#40 CFR 136
003#astm.d3697.1992.pdf#1992#American Society for Testing and Materials#ASTM D3697: Standard Test Method for Antimony in Water#21 CFR 165.110(b)(4)(iii)(E)(1)(iv)
003#astm.d4891.1989.pdf#1989#American Society for Testing and Materials#ASTM D4891: Standard Test Method for Heating Value of Gases in Natural Gas Range by Stolchiometric Combustion#40 CFR 75, Appendix F, Section 5.5.2
003#astm.d5257.1997.pdf#1997#American Society for Testing and Materials#ASTM D5257: Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography#40 CFR 136.3(a)
003#astm.d5673.1996.pdf#1996#American Society for Testing and Materials#ASTM D5673: Standard Test Method for Elements in Water by Inductively Coupled Plasma#40 CFR 444.12(b)(1)
003#astm.e29.2002.pdf#2002#American Society for Testing and Materials#ASTM E29: Standard Specification for Diesel Fuel Oils#40 CFR 1065.701 Table 1
003#astm.e84.2001.pdf#2001#American Society for Testing and Materials#ASTM E84: Standard Test Method for Surface Burning Characteristics of Building Materials#24 CFR 3280.203(a)
003#astm.e119.2000.pdf#2000#American Society for Testing and Materials#ASTM E119: Standard Test Methods for Fire Tests of Building Construction and Materials#49 CFR 238 Appendix B(a)(1)(v)
003#astm.e1590.2001.pdf#2001#American Society for Testing and Materials#ASTM E1590: Standard Test Method for Fire Testing of Mattresses#49 CFR 238 Appendix B(a)(1)(xi)
003#astm.f1546.1996.pdf#1996#American Society for Testing and Materials#ASTM F1546: Standard Specification for Firehose Nozzles#46 CFR 162.027-3(a)
003#astm.f2412.2005.pdf#2005#American Society for Testing and Materials#ASTM F2412: Standard Test Methods for Foot Protection#29 CFR 1910
003#astm.f2413.2005.pdf#2005#American Society for Testing and Materials#ASTM F2413: Performance Requirements for Protective Footware#29 CFR 1910
003#awpa.a1.1991.pdf#1991#American Wood Preservers Association#AWPA A1: Standard Methods for Analysis of Creosote and Oil-Type Preservatives#7 CFR 1728.201(i)(1)(i)
003#awpa.a2.1991.pdf#1991#American Wood Preservers Association#AWPA A2: Standard Methods for Analysis of Waterborne Preservatives and Fire-Retardant Formulations#7 CFR 1728.201(i)(1)(iii)(A)
003#awpa.a3.1991.pdf#1991#American Wood Preservers Association#AWPA A3: Standard Methods for Determining Penetration of Preservatives and Fire Retardants#7 CFR 1728.201(k)(3)
003#awpa.a5.1991.pdf#1991#American Wood Preservers Association#AWPA A5: Standard Methods for Analysis of Oil-Borne Preservatives#7 CFR 1728.202(g)(1)(v)(B)
003#awpa.a6.1989.pdf#1989#American Wood Preservers Association#AWPA A6: Method for the Determination of Oil-Type Preservatives and Water in Wood#7 CFR 1728.202(g)(1)(v)(A)
003#awpa.a7.1975.pdf#1975#American Wood Preservers Association#AWPA A7: Standard Wet Ashing Procedure for Preparing Wood for Chemical Analysis#7 CFR 1728.202(g)(1)(v)(D)
003#awpa.a9.1990.pdf#1990#American Wood Preservers Association#AWPA A9: Standard Method for Analysis of Treated Wood and Treating Solutions by X-ray Spectroscopy#7 CFR 1728.202(g)(1)(v)(C)
003#awpa.a11.1983.pdf#1983#American Wood Preservers Association#AWPA A11: Standard Method for Analysis of Treated Wood and Treating Solutions by Atomic Absorption Spectroscopy#7 CFR 1728.201(i)(1)(iii)(B)
003#awpa.m3.1981.pdf#1981#American Wood Preservers Association#AWPA M3: Standard Quality Control Procedures for Wood Preserving Plants#7 CFR 1728.202(f)(1)
003#awpa.p1.1991.pdf#1991#American Wood Preservers Association#AWPA P1: Standard for Coal Tar Creosote for Land and Fresh Water and Marine (Coastal) Water Use#7 CFR 1728.201(i)(1)(i)
003#awpa.p5.1991.pdf#1991#American Wood Preservers Association#AWPA P5: Standard for Waterborne Preservative#7 CFR 1728.201(i)(1)(iii)(A)
003#awpa.p8.1991.pdf#1991#American Wood Preservers Association#AWPA P8: Standard for Oil-Borne Preservatives#7 CFR 1728.201(i)(1)(iv)
003#awpa.p9.1991.pdf#1991#American Wood Preservers Association#AWPA P9: Standard for Solvents and Formulations for Organic Preservative Systems#7 CFR 1728.201(i)(1)(iv)
003#aws.d1.1.2000.pdf#2000#American Welding Society#AWS D1.1: Structural Welding Code--Steel#30 CFR 250.901(a)(20)
003#bhma.a156.10.1999.pdf#1999#Builders Hardware Manufacturers Association#BHMA A156.10: Power Operated Pedestrian Doors#36 CFR 1191, App B, 105.2.1
003#bhma.a156.19.2002.pdf#2002#Builders Hardware Manufacturers Association#BHMA A156.19: Power Assist and Low Energy Power Operated Doors#36 CFR 1191, App B, 408.3.2.1
003#boca.mechanical.1993.pdf#1993#Building Officials and Code Administrators International#BOCA: Mechanical Code#24 CFR 200.925c(a)(1)(i)
003#boca.plumbing.1993.pdf#1993#Building Officials and Code Administrators International#BOCA: Plumbing Code#24 CFR 200.925c(a)(1)(i)
003#bs.en-13000.2004.pdf#2004#British Standards Institute#BSI EN-13000: Cranes--Safety--Mobile Cranes#29 CFR 1926
003#bs.en-14439.2006.pdf#2006#British Standards Institute#BSI EN-14439: Cranes--Safety--Tower Cranes#29 CFR 1926
003#cabo.dwelling.1992.pdf#1992#Council of American Building Officials#CABO: One and Two Family Dwelling Code#24 CFR 200.926b(c)
003#cabo.dwelling.1993.pdf#1993#Council of American Building Officials#CABO: One and Two Family Dwelling Code with Errata Package and 1993 Amendments#24 CFR 200.926(d)(1)(ii)((B)(2)(ii)
003#cga.s-7.2005.pdf#2005#Compressed Gas Association#CGA S-7: Method for Selecting Pressure Relief Devices for Compressed Gas Mixtures in Cylinders#49 CFR 173.301(c)
003#ci.57.2009.pdf#2009#Chlorine Institute#CI 57: Emergency Shut-Off Systems for Bulk Transfer of Chlorine#49 CFR 177.840(u)
003#ci.kit.a.2009.pdf#2009#Chlorine Institute#CI: Chlorine Institute Emergency Kit A for 100-lb. and 150-lb. Chlorine Cylinders#49 CFR 173.3(e)(1)
003#ci.kit.b.2009.pdf#2009#Chlorine Institute#CI: Chlorine Institute Emergency Kit B for Chlorine Ton Containers#49 CFR 173.3(e)(1)
003#cie.15.2004.pdf#2004#International Commission on Illumination#CIE 15: Technical Report: Colorimetry, 3rd edition#10 CFR 430 Subpart B, App. R, 4.1.1
003#cie.15.2004.spectra.xls#2004#International Commission on Illumination#CIE 15: Supplementary Tables#10 CFR 430 Subpart B, App. R, 4.1.1
003#cie.15.2004.tables.xls#2004#International Commission on Illumination#CIE 15: Supplementary Tables#10 CFR 430 Subpart B, App. R, 4.1.1
003#cra.A-20.1986.pdf#1986#Corn Refiners Association#CRA A-20: Analysis for Starch in Corn#7 CFR 801.7(a)(2)
003#csa.c390.1993.pdf#1993#Canadian Standards Association#CSA C390: Energy Efficiency Test Methods for Three-Phase Induction Motors#10 CFR 431.19(b)(4)
003#ctioa.r8-103-62.1969.pdf#1969#Ceramic Tile Institute of America#CTIOA R8-103-62: Standard Specifications for the Installation of Tile Lined Shower Receptors#24 CFR 200, Subpart S
003#cvsa.out-of-service.2004.pdf#2004#Commercial Vehicle Safety Alliance#CSVA: North American Standard Out-of-Service Criteria and Level VI Inspection Procedures and Out-of-Service Criteria for Commercial Highway Vehicles#49 CFR 385.415(b)(1)
003#ei.501.2005.pdf#2005#Energy Institute#EI IP-501: Determination of aluminum, silicon, vanadium, nickel, iron, sodium, calcium, zinc and phosphorus in residual fuel oil#40 CFR 1065.705 Table 1
003#fgma.glazing.1990.pdf#1990#Flat Glass Marketing Association#FGMA: Glazing Manual#24 CFR 200, Subpart S
004#gli.method.2.2009.pdf#2009#Great Lakes Instruments#GLI METHOD 2: Turbidity#40 CFR 141.74(a)(1)
004#gpa.2261-00.2000.pdf#2000#Gas Producers Association#GPA 2261: Analysis of Natural Gas and Similar Gaseous Mixtures by Gas Chromatography#40 CFR 75, Appendix F, Section 5.5.2
004#gpa.2261.2000.pdf#2000#Gas Processors Association#GPA 2261: Analysis of Natural Gas and Similar Gaseous Mixtures by Gas Chromatography#40 CFR 75, Appendix F
004#gpa.2377.1986.pdf#1986#Gas Processors Association#GPA 2377: Test for Hydrogen Sulfide and Carbon Dioxide in Natural Gas Using Length of Stain Tubes#40 CFR 60.334(h)(1)
004#hach.8000.2007.pdf#2007#Hach Chemical Company#HACH 8000: Oxygen Demand, Chemical Using Reactor Digestion Method#40 CFR 136.3(a)
004#hach.8008.2007.pdf#2007#Hach Chemical Company#HACH 8008: 1, 10--Phenanthroline Method Using FerroVer Iron Reagent for Water#40 CFR 136.3(a)
004#hach.8009.2007.pdf#2007#Hach Chemical Company#HACH 8009: Zincon Method for Zinc, Hatch Handbook of Water Analysis#40 CFR 444.12(b)(1) 
004#hach.8034.2007.pdf#2007#Hach Chemical Company#HACH 8034: Periodate Oxidation Method for Manganese#40 CFR 136.3(a)
004#hach.8507.2007.pdf#2007#Hach Chemical Company#HACH 8507: Nitrogen Nitrite--Low Range, Diazotization Method for Water and Wastewater#40 CFR 136.3(a)
004#hi.BTS-2000.2007.pdf#2007#Hydronics Institute#HI BTS-2000: Method to Determine Efficiency of Commercial Space Heating Boilers#10 CFR 431.86
004#hpma.hp-sg-96.1996.pdf#1996#Hardwood Plywood Manufacturers Association#HPMA HP-SG-96: Structural Design Guide for Hardwood Plywood Wall Panels#24 CFR 3280.304(b)(1)
004#icao.9284.2011.pdf#2011#International Civil Aviation Organization#ICAO 9284: Technical Instructions for the Safe Transport of Dangerous Goods by Air#49 CFR 171.7
004#ieee.1202.1991.pdf#1991#Institute of Electrical and Electronics Engineers#IEEE 1202: Standard for Flame Testing of Cables#46 CFR 111
004#ieee.c2.1997.pdf#1997#Institute of Electrical and Electronics Engineers#IEEE C2: National Electrical Safety Code#7 CFR 1755.503(d)(1)
004#ieee.p730.1.1989.pdf#1989#Institute of Electrical and Electronics Engineers#IEEE P730.1: Standard for Software Quality Assurance Plans#7 CFR 1755.522(n)(2)
004#iesna.lm-45.2000.pdf#2000#Illuminating Engineering Society of North America#IESNA LM-45: Method for Electrical and Photometric Measurements of General Service Incandescent Filament Lamps#10 CFR 430 Subpart B
004#ime.explosives.1940.pdf#1940#Institute of Makers of Explosives#IME: Safety in the Handling and Use of Explosives#29 CFR 1910.261(a)(4)(iii)
004#imo.imdg.1.2006.pdf#2006#International Maritime Organization#IMO IMDG.1: International Maritime Dangerous Goods Code (Volume 1)#49 CFR 172.519(f)
004#imo.imdg.2.2006.pdf#2006#International Maritime Organization#IMO IMDG.2: International Maritime Dangerous Goods Code (Volume 2)#49 CFR 172.519(f)
004#iso.6406.2005.pdf#2005#International Organization for Standardization#ISO 6406: Seamless Steel Gas Cylinders--Inspection and Testing#49 CFR 180
004#iso.7225.2005.pdf#2005#International Organization for Standardization#ISO 7225:Gas Cylinders--Precautionary Labels#49 CFR 178.71(r)(2)
004#iso.10461.2005.pdf#2005#International Organization for Standardization#ISO 10461: Seamless Aluminum Alloy Gas Cylinders--Inspection and Testing#49 CFR 180
004#iso.10462.2005.pdf#2005#International Organization for Standardization#ISO 10462: Transportable Cylinders for Dissolved Acetylene#49 CFR 180
004#iso.11623.2002.pdf#2002#International Organization for Standardization#ISO 11623: Periodic Inspection and Testing of Composite Gas Cylinders#49 CFR 180
004#iso.11660-1.2008.pdf#2008#International Organization for Standardization#ISO 11660-1: Cranes: Access, Guards and Restraints: General#29 CFR 1926
004#iso.11660-2.1994.pdf#1994#International Organization for Standardization#ISO 11660-2: Cranes: Access, Guards and Restraints: Mobile Cranes#29 CFR 1926
004#iso.11660-3.2008.pdf#2008#International Organization for Standardization#ISO 11660-3: Cranes: Access, Guards and Restraints: Tower Cranes#29 CFR 1926
004#iso.14230-4.2000.pdf#2000#International Organization for Standardization#ISO 14230-4: Road Vehicles--Diagnostic Systems#40 CFR 1048.110(g)(2)
004#iso.18902.2001.pdf#2001#International Organization for Standardization#ISO 18902: Photographic Processed Films, Plates, and Papers#36 CFR 1237
004#iso.18906.2000.pdf#2000#International Organization for Standardization#ISO 18906: Photographic Films--Specifications for Safety Film#36 CFR 1237
004#itu-r.M-493-11.2004.pdf#2004#International Telecommunication Union#ITU-R M-493-11: Digital Selective-calling System for Use in the Maritime Mobile Service, with Annexes 1 and 2#47 CFR 80.1101(c)(2)(ii)
004#itu-r.m-541-8.1997.pdf#1997#International Telecommunication Union#ITU-R M-541-8: Operational Procedures for the Use of Digital Selective-Calling Equipment in the Maritime Mobile Service#47 CFR 80.1101(c)(4)(iii)
004#itu-r.M-541-9.2004.pdf#2004#International Telecommunication Union#ITU-R M-541-9: Operational Procedures for the Use of Digital Selective-Calling Equipment in the Maritime Mobile Service#47 CFR 80.1101(c)(2)(iii)
004#itu-r.M-628-3.1994.pdf#1994#International Telecommunication Union#ITU-R M-628-3: Technical Characteristics for Search and Rescue Radar Transponders#47 CFR 80.1101(c)(6)(ii)
004#itu-r.M-632-3.1997.pdf#1997#International Telecommunication Union#ITU-R M-632-3: Transmission Characteristics of a Satellite Emergency Position Indicating Radio Beacon#47 CFR 80.1101(c)(11)(iii)
004#itu-r.M-633-3.2004.pdf#2004#International Telecommunication Union#ITU-R M-633-3: Transmission characteristics of a satellite emergency position-indicating radiobeacon system operating through a low polar-orbiting satellite system#47 CFR 80.1101(c)(5)(iii)
004#itu-r.M-1371-1.2001.pdf#2001#International Telecommunication Union#ITU-R M-1371-1: Technical Characteristics for a Universal Shipborne Automatic Identification System Using Time Division Multiple Access#47 CFR 80.1101(c)(12)(i)
004#itu-t.E.161.2001.pdf#2001#International Telecommunication Union#ITU-T E.161: Arrangement of Digits, Letters and Symbols on Telephones and Other Devices that Can Be Used for Gaining Access to a Telephone Network#47 CFR 80.1101(b)(2)
004#itu-t.E.164.1.2008.pdf#2008#International Telecommunication Union#ITU-T E.164.1: Numbering Plan of the International Telephone Service#47 CFR 80.1101(b)(3)
004#lachat.10-204-00-1-x.2008.pdf#2008#Lachat Instruments#LACHAT 10-204-00-1-X:Digestion and Distillation of Total Cyanide in Drinking and Wastewaters#40 CFR 136.3(a) Table IB
004#nace.rp0502.2002.pdf#2002#National Association of Corrosion Engineers#NACE RP-0502: Pipeline External Corrosion Direct Assessment Methodology#49 CFR 192.925(b)(3)
004#nacm.steel.chain.2003.pdf#2003#National Association of Chain Manufacturers#NACM: Welded Steel Chain Specifications#49 CFR 393.104(e)(2)
004#nas.prudent.2011.pdf#2011#National Academy of Sciences#NAS: Prudent Practices in the Laboratory: Handling and Disposal of Chemicals#42 CFR 52b.12(c)(6)
004#ncasi.ciwp9801.1998.pdf#1998#National Council of the Paper Industry for Air and Stream Improvements#NCASI 98-01: Chilled Impinger Method For Use At Wood Products Mills to Measure Formaldehyde, Methanol, and Phenol#40 CFR 63, Subpart DDDD
004#ncasi.dimeoh9402.2002.pdf#2002#National Council of the Paper Industry for Air and Stream Improvements#NCASII 94-03: Methanol in Process Liquids by Gas Chromatography/Flame Ionization Detection#40 CFR 63.457(c)(3)(ii)
004#ncasi.FP-A105.2001.pdf#2001#National Council of the Paper Industry for Air and Stream Improvements#NCASI A105: Impinger Source Sampling Method for Selected Aldehydes, Ketones, and Polar Compounds#40 CFR 63, Subpart DDDD
004#ncasi.wp9902.2002.pdf#2002#National Council of the Paper Industry for Air and Stream Improvements#NCASI 99-02: Impinger/Canister Source Sampling Method For Selected HAPs and Other Compounds at Wood Products Facilities#40 CFR 63, Subpart DDDD
004#ncca.bales.2011.pdf#2011#National Cotton Council of America#NCCA: Specifications for Cotton Bale Packaging Material#7 CFR 1427.5(b)(10)
004#ncutlo.vehicle.1969.pdf#1969#National Committee on Uniform Traffic Laws and Ordinances#NCUTLO: Uniform Vehicle Code and Model Ordinance#41 CFR 50-204.75
004#nfpa.10.2002.pdf#2002#National Fire Protection Association#NFPA 10: Standard for Portable Fire Extinguishers#29 CFR 1915
004#nfpa.11.2005.pdf#2005#National Fire Protection Association#NFPA 11: Standard for Foam#29 CFR 1915
004#nfpa.12.2005.pdf#2005#National Fire Protection Association#NFPA 12: Standard for Carbon Dioxide Extinguishing Systems#29 CFR 1915
004#nfpa.13.2002.pdf#2002#National Fire Protection Association#NFPA 13: Standard for the Installation of Sprinkler Systems#36 CFR 1234.12(i)
004#nfpa.25.2002.pdf#2002#National Fire Protection Association#NFPA 25: Standard for Water-Based Fire Protection Systems#29 CFR 1915
004#nfpa.30.2003.pdf#2003#National Fire Protection Association#NFPA 30: Flammable and Combustible Liquids Code#49 CFR 192
004#nfpa.54.2002.pdf#2002#National Fire Protection Association#NFPA 54: National Fuel and Gas Code#24 CFR 3280
004#nfpa.58.2001.pdf#2001#National Fire Protection Association#NFPA 58: Standard for Liquefied Petroleum Gases#49 CFR 173
004#nfpa.72.2002.pdf#2002#National Fire Protection Association#NFPA 72: National Fire Alarm Code#29 CFR 1915
004#nfpa.99.2005.pdf#2005#National Fire Protection Association#NFPA 99: Standard for Health Care Facilities#38 CFR 51.200(b)(4)
004#nfpa.101.2000.pdf#2000#National Fire Protection Association#NFPA 101: Life Safety Code#59 CFR 130
004#nfpa.704.2007.pdf#2007#National Fire Protection Association#NFPA 704: Standard System for the Identification of the Hazards of Materials for Emergency Response#6 CFR 27.204(a)(2)
005#nsf.61.2001.pdf#2001#National Sanitation Foundation#NSF 61: Drinking Water System Components--Health Effects#24 CFR 3280
005#oecd.404.2002.pdf#2002#Organization for Economic Cooperation and Development#OECD 404: Guideline for Testing of Chemicals, Acute Dermal Irritation/Corrosion#49 CFR 173.137
005#oecd.C93.1974.pdf#1974#Organization for Economic Cooperation and Development#OECD C93: Green List of Wastes#40 CFR 262.89(e)
005#orion.97.1970.pdf#1970#ORION Research Incorporated#ORION: Residual Chlorine Electrode Model 97-70#40 CFR 136.3(a) Table IB
005#pci.mn.121.1977.pdf#1977#Precast/Prestressed Concrete Institute#PCI MNL-121: Manual for Structural Design of Architectural Precast Concrete#24 CFR 200, Subpart S
005#pci.mnl-117-77.1977.pdf#1977#Precast/Prestressed Concrete Institute#PCI MNL-117-77: Manual for Quality Control for Plants and Production of Architectural Precast Concrete Products#24 CFR 200, Subpart S
005#pcsa.1.1968.pdf#1968#Power Crane and Shovel Association#PCSA 1: Mobile Crane and Excavator Standards#29 CFR 1926.602(b)(3)
005#pcsa.2.1968.pdf#1968#Power Crane and Shovel Association#PCSA 2: Mobile Hydraulic Crane Standards#29 CFR 1926.602(b)(3)
005#pcsa.3.1969.pdf#1969#Power Crane and Shovel Association#PCSA 3: Mobile Hydraulic Excavator Standards#29 CFR 1926.602(b)(3)
005#ppi.tr3.e.2004.pdf#2004#Plastics Pipe Institute#PPI TR-3: Policies and Procedures for Developing Hydrostatic Design Bases (HDB), Pressure Design Bases (PDB), and Minimum Required Thermoplastic Piping Materials#49 CFR 192.121
005#rtcm.c071.1995.pdf#1995#Radio Technical Commission for Maritime Services#RTCM C071: Recommended Standards for Marine Radar Equipment Installed on Ships of Less Than 300 Tons Gross Tonnage#33 CFR 164.72(a)(1)(i)(B)
005#rtcm.c191.1993.pdf#1993#Radio Technical Commission for Maritime Services#RTCM C191: Recommended Standards for Marine Radar Equipment Installed on Ships of 300 Tons Gross Tonnage and Upwards#33 CFR 164.72(a)(1)(iii)(B)
005#sae.j30.1998.pdf#1998#Society of Automotive Engineers#SAE J30: Fuel and Oil Hoses#40 CFR 1051.501(c)(2)
005#sae.j185.1988.pdf#1988#Society of Automotive Engineers#SAE J185: Recommended Practice for Access Systems for Off-Road Machines#29 CFR 1910.266(f)(5)(i)
005#sae.j211-1.1995.pdf#1995#Society of Automotive Engineers#SAE J211-1: Instrumentation for Impact Test#49 CFR 571
005#sae.j386.1997.pdf#1997#Society of Automotive Engineers#SAE J386: Operator Restraint Systems for Off-Road Work Machines#30 CFR 57.14131(c)
005#sae.j387.1987.pdf#1987#Society of Automotive Engineers#SAE J387: Terminology: Motor Vehicle Lighting#49 CFR 571
005#sae.j449a.1963.pdf#1963#Society of Automotive Engineers#SAE J449a: Surface Texture Control#49 CFR 581.6(b)(1)
005#sae.j476a.1961.pdf#1961#Society of Automotive Engineers#SAE J476a: Dryseal Pipe Threads#49 CFR 393.67(c)(3)
005#sae.j573d.1968.pdf#1968#Society of Automotive Engineers#SAE J573d: Requirements for Lamp Bulbs and Sealed Units#49 CFR 571
005#sae.j576.1991.pdf#1991#Society of Automotive Engineers#SAE J576: Plastic Materials for Use in Optical Parts#49 CFR 571
005#sae.j578.1995.pdf#1995#Society of Automotive Engineers#SAE J578: Color Specification for Electric Signal Lighting Devices#49 CFR 571
005#sae.j584.1993.pdf#1993#Society of Automotive Engineers#SAE J584: Requirements for Motorcycle Headlamps#49 CFR 571
005#sae.j585.2000.pdf#2000#Society of Automotive Engineers#SAE J585: Tail Lamps (Rear Position Light)#49 CFR 571.108 S6.1
005#sae.j586.2000.pdf#2000#Society of Automotive Engineers#SAE J586: Stop Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width#49 CFR 571.108 S6.1
005#sae.j587.1981.pdf#1981#Society of Automotive Engineers#SAE J587: License Plate Lamps (Rear Registration Lamps)#49 CFR 571
005#sae.j588.1984.pdf#1984#Society of Automotive Engineers#SAE J588: Requirements for Turn Signal Lamps#49 CFR 571
005#sae.j588.2000.pdf#2000#Society of Automotive Engineers#SAE J588: Turn Signal Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width#49 CFR 393.25(c)
005#sae.j592.1992.pdf#1992#Society of Automotive Engineers#SAE J592: Clearance, Side Marker, and Identification Lamps#49 CFR 571
005#sae.j594f.1977.pdf#1977#Society of Automotive Engineers#SAE J594f: Requirements for Reflex Reflectors#49 CFR 571
005#sae.j599.1997.pdf#1997#Society of Automotive Engineers#SAE J599: Lighting Inspection Code#49 CFR 581.5(c)(1)
005#sae.j602.1980.pdf#1980#Society of Automotive Engineers#SAE J602: Mechanically Aimable Sealed Beam Headlamps#49 CFR 571
005#sae.j759.1995.pdf#1995#Society of Automotive Engineers#SAE J759: Lighting Identification Code#49 CFR 571
005#sae.j826.1995.pdf#1995#Society of Automotive Engineers#SAE J826: Defining and Measuring Vehicle Seating Accommodation#49 CFR 571
005#sae.j845.1997.pdf#1997#Society of Automotive Engineers#SAE J845: Optical Warning Devices for Authorized Emergency, Maintenance and Service Vehicles#49 CFR 393.25(e)
005#sae.j1100.2001.pdf#2001#Society of Automotive Engineers#SAE J1100: Motor Vehicle Dimensions#49 CFR 571
005#sae.j1151.1991.pdf#1991#Society of Automotive Engineers#SAE J1151: Methane Measurement Using Gas Chromatography#40 CFR 86.111-94(b)(3)(vii)
005#sae.j1194.1999.pdf#1999#Society of Automotive Engineers#SAE J1194: Roll-Over Protective Structures for Wheeled Agricultural Tractors#30 CFR 57.14130(h)
005#sae.j1292.1981.pdf#1981#Society of Automotive Engineers#SAE J1292: Automobile, Truck, Truck-Tractor, Trailer, and Motor Coach Wiring#49 CFR 393.28
005#sae.j1383.1985.pdf#1985#Society of Automotive Engineers#SAE J1383: Performance Requirements for Motor Vehicle Headlamps#49 CFR 571
005#sae.j1395.1985.pdf#1985#Society of Automotive Engineers#SAE J1395: Turn Signal Lamps for Use on Motor Vehicles#49 CFR 571
005#sae.j1398.1985.pdf#1985#Society of Automotive Engineers#SAE J1398: Stop Lamps for Use on Motor Vehicles#49 CFR 571
005#sae.j1703.1995.pdf#1995#Society of Automotive Engineers#SAE J1703: Motor Vehicle Brake Fluids#49 CFR 571
005#sae.j1733.1994.pdf#1994#Society of Automotive Engineers#SAE J1733: Sign Convention for Vehicle Crash Testing#49 CFR 572
005#sae.j1817.2001.pdf#2001#Society of Automotive Engineers#SAE J1817: Long Stroke Air Brake Actuator Marking#49 CFR 393.47(e)
005#sae.j1850.2001.pdf#2001#Society of Automotive Engineers#SAE J1850: Class B Data Communication Network Interface#40 CFR 86.1806-05(h)(1)(i)
005#sae.j1877.1994.pdf#1994#Society of Automotive Engineers#SAE J1877: Recommended Practice for Bar-Coded Vehicle Identification Number Label#40 CFR 86.095-35(h)(2)(i)
005#sae.j1930.2002.pdf#2002#Society of Automotive Engineers#SAE J1930: Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms#40 CFR 86.1806-05(h)(1)(v)
005#sae.j1962.2002.pdf#2002#Society of Automotive Engineers#SAE J1962: Diagnostic Connector Equivalent to ISO/DIS 15031#40 CFR 86.1806-05(h)(1)(iv)
005#sae.j1978.2002.pdf#2002#Society of Automotive Engineers#SAE J1978: OBD II Scan Tool Equivalent to ISO/DIS 15031-4#40 CFR 86.1806-05(h)(1)(vi)
005#sae.j1979.2002.pdf#2002#Society of Automotive Engineers#SAE J1979: E/E Diagnostic Test Modes#40 CFR 86.1806-05(h)(1)(ii)
005#sae.j2009.1993.pdf#1993#Society of Automotive Engineers#SAE J2009: Discharge Forward Lighting Systems#49 CFR 571
005#sae.j2012.2002.pdf#2002#Society of Automotive Engineers#SAE J2012: Diagnostic Trouble Code Definitions#40 CFR 86.1806-04(h)(1)(iii)
005#sae.j2040.2002.pdf#2002#Society of Automotive Engineers#SAE J2040: Tail Lamps (Rear Position Lamps) for Use on Vehicles 2032 mm or More in Overall Width#9 CFR 393.25(c)
005#sae.j2260.1996.pdf#1996#Society of Automotive Engineers#SAE J2260: Non-metallic Fuel System Tubing with One or More Layers#40 CFR 1048.105(a)(2)
005#sae.j2261.2002.pdf#2002#Society of Automotive Engineers#SAE J2261: Stop Lamps and Front- and Rear-Turn Signal Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width#49 CFR 393.25(c)
005#sae.j2534.2002.pdf#2002#Society of Automotive Engineers#SAE J2534: Recommended Practice for Pass-Thru Vehicle Programming#40 CFR 86.096-38(g)(17)(iv)
005#sji.std.spec.1994.pdf#1994#Steel Joist Institute#SJI: Standard Specification Load Tables and Weight Tables for Steel Joists and Joist Girders#24 CFR 3280.304(b)(1)
005#smaccna.hvac.1985.pdf#1985#Sheet Metal and Air Conditioning Contractors National Association#SMACCNA: HVAC Air Duct Leakage Test Manual#10 CFR 434.403.2.9.3
006#snell.org.b90astd.1998.pdf#1998#Snell Memorial Foundation#SNELL B-90: Standard for Protective Headgear for Use in Bicycling#16 CFR 1203.53(a)(4)
006#snell.org.b95rev.1998.pdf#1998#Snell Memorial Foundation#SNELL B-95: Standard for Protective Headgear for Use in Bicycling#16 CFR 1203.53(a)(7)
006#srcc.og-300.2008.pdf#2008#Solar Rating and Certification Corporation#SRCC OG-300: Operating Guidelines and Minimum Standards for Certifying Solar Water Heating Systems#24 CFR 200.950(a)(1)
006#tpi.1985.pdf#1985#Truss Plate Institute#TPI: Design Specifications for Metal Plate Connected Wood Trusses#24 CFR 3280.304(b)(1)
006#ttma.rp.61.1998.pdf#1998#Truck Trailer Manufacturers Association#TTMA RP-61: Performance of Manhole and/or Fill Opening Assemblies#49 CFR 180.405(g)(2)(i)
006#ttma.rp.81.1997.pdf#1997#Truck Trailer Manufacturers Association#TTMA RP-81: Performance of Spring Loaded Pressure Relief Valves#49 CFR 178.345-10(b)(3)(i)
006#ttma.rp.107.1998.pdf#1998#Truck Trailer Manufacturers Association#TTMA RP-107: Procedure for Testing In-Service Unmarked and/or Uncertified MC 306 and Non-ASME MC 312 Type Cargo Tank Manhole#49 CFR 180.405(g)(2)(i)
006#ul.142.1968.pdf#1968#Underwriters Laboratories#UL 142: Steel Above Ground Tanks for Flammable and Combustible Liquids#49 CFR 1910
006#usec.651.1995.pdf#1995#United States Enrichment Corporation#USEC 651: Good Handling Practices for Uranium Hexafluoride#49 CFR 173.417(a)(3)(i)
006#usphs.934.1962.pdf#1962#U.S. Public Health Service#USPHS 934: Food Service Sanitation Ordinance and Code#29 CFR 1910.142(i)(1)
006#usphs.956.1962.pdf#1962#U.S. Public Health Service#USPHS 956: Drinking Water Standards#46 CFR 160.026-4(a)
006#wclib.r17.2004.pdf#2004#West Coast Lumber Inspection Bureau#WCLIB R17: Grading Rules for West Coast Lumber#7 CFR 1728.201(f)(1)(i)
006#who.rabies.1973.pdf#1973#World Health Organization#WHO: Laboratory Techniques in Rabies#9 CFR 113.209(d)(3)
006#wipo.st.25.2001.pdf#2001#World Intellectual Property Organization#WIPO ST.25: Handbook on Industrial Property Information and Documentation#37 CFR 1.821(a)(1)
006#wstda.t-1.2005.pdf#2005#Web Sling and Tiedown Association#WSTDA T-1: Recommended Standard Specification for Synthetic Web Tiedowns#49 CFR 393.104(e)(3)