Divisional Index ↑

Public Safety Standards of the Republic of India

Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.

Division Name: Transport Engineering
Section Name: Automotive Primemovers (TED 2)

StandardYearTitleIBR
IS 810 (pdf)
IS 810 (txt)
1991Internal Combustion Engines - Engine Valves
IS 1543 (pdf)1964Single Cylinder Fuel Injection Pumps
IS 2765 (pdf)1982Radiator hose
IS 3169 (pdf)1991Internal Combustion Engines - Two Stage, One Litre, Diesel Fuel Filters
IS 3170-1 (pdf)
IS 3170-1 (txt)
2006Internal Combustion Engines - Fuel Injection Nozzles, Part 1: Injection Nozzles - Size 'S'ISO 2697
IS 3170-2 (pdf)
IS 3170-2 (txt)
2006Internal Combustion Engines - Fuel Injection Nozzles, Part 2: Calibrating Nozzle, Delay Pintle TypeISO 4010
IS 3171-1 (pdf)
IS 3171-1 (txt)
1997Internal Combustion Engines - Fuel Injection Nozzle Holders, Part 1: Flange Mounted Fuel Injectors Size 'S' Types 2, 3, 4, 5 and 6ISO 2699
IS 3171-2 (pdf)
IS 3171-2 (txt)
2006Internal Combustion Engines - Fuel Injection Nozzle Holders, Part 2: Screw-in Injection Nozzle Holders, Types 20, 21, 21.1 and 27 for Pintle Nozzle Size 'S', Type BISO 7026
IS 3171-3 (pdf)
IS 3171-3 (txt)
1997Internal Combustion Engines - Fuel Injection Nozzle Holders, Part 3: Screw Mounted Injection Nozzle Holders, Types 12, 13, 14,15, 16, 17, 18 and 19ISO 7030
IS 3172 (pdf)1997Internal Combustion Engines - Fuel Injection Equipment - Single and Double Ended Pipe Unions (single and double ended banjo)
IS 3173 (pdf)
IS 3173 (txt)
1965High pressure connections for fuel injection equipment for diesel engines
IS 3174 (pdf)1974Pipe Union Bolt
IS 3175 (pdf)1974Sealing Washers for Pipe Unions
IS 3175 (pdf)
IS 3175 (txt)
2013Internal Combustion Engine - Sealing Washers for Pipe Unions
IS 3351 (pdf)
IS 3351 (txt)
2006Road vehicles - Fuel filters for diesel engines - Test methods4020
IS 3649 (pdf)
IS 3649 (txt)
1966Clutch Facing for Automotive Transmission
IS 5791 (pdf)
IS 5791 (txt)
2006Internal combustion engines - Piston rings - Material specificationsISO 6621-3
IS 6740 (pdf)1985Gudgeon pins for internal combustion engines
IS 6750 (pdf)1985Cylinder liners for internal combustion engines
IS 7065 (pdf)1973Steering Wheels
IS 7347 (pdf)1974Performance of Small Size Spark Ignition Engines for agricultural sprayers and similar applications
IS 7449-1 (pdf)
IS 7449-1 (txt)
1974Glossary of terms for IC engines, Part 1: Fuel injection equipment
IS 7451-1 (pdf)
IS 7451-1 (txt)
2007Reciprocating internal combustion engines - Vocbulary, Part 1: Terms for engine design and operationISO 2710-1
IS 7451-2 (pdf)
IS 7451-2 (txt)
2006Reciprocating Internal Combustion Engines, Part II: Designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine ( Amalgamating Part 3,4and5)ISO 1204
IS 7451-6 (pdf)
IS 7451-6 (txt)
2007Reciprocating Internal Combustion Engines, Part VI: Hand Operated Control Devices - Standard Direction of MotionISO 2261
IS 7611 (pdf)
IS 7611 (txt)
1993Internal Combustion Engines - Radiators
IS 7657-1 (pdf)1975Starter Ring Gears for Internal Combustion Engines, Part I: Gears for Inertia and Solenoid Pre-engaged Starters
IS 7657-2 (pdf)1975Starter Ring Gears for Internal Combustion Engines, Part II: Gears for Axial and Coaxial Starters
IS 8118 (pdf)
IS 8118 (txt)
2008Automotive Vehicles - Opacity (Smoke) of Exhaust Gas from Vehicles Equipped with Compression Ignition Engines Operating Under Free Acceleration - Method of Measurement
IS 8422-1 (pdf)1977Piston Rings for IC Engines, Part I: Plain Compression Rings from 30 up to 200 mm Nominal Diameter R-Rings
IS 8422-2 (pdf)1977Piston Rings for IC Engines, Part II: Taper Faced Compression Rings from 30 up to 200 mm Nominal Diameter M-rings
IS 8422-3 (pdf)1977Piston Rings for IC Engines, Part III: Keystone Rings from 82 up to 200 mm Nominal Diameter T-rings 15°
IS 8422-4 (pdf)1977Piston rings for IC engines, Part 4: Napier oil scraper rings from 30 up to 200 mm nominal diameter N-Rings
IS 8422-5 (pdf)1977Piston rings for IC engines, Part 5: Stepped oil scraper rings from 30 up to 200 mm nominal diameter Z-Rings
IS 8422-6 (pdf)1977Piston rings for IC engines, Part 6: Slotted oil control rings from 50 up to 200 mm nominal diameter S-Rings
IS 8422-7 (pdf)1977Piston rings for IC engines, Part 7: Double bevelled slotted oil control rings from 50 up to 200 mm nominal diameter G-Rings
IS 8422-8 (pdf)1977Piston rings for IC engines, Part 8: Narrow land slotted oil control rings from 50 up to 200 mm nominal diameter D-Rings
IS 8422-9 (pdf)1986Piston rings for lC engines, Part 9: Terms and Definitions
IS 8503 (pdf)1986Technical supply conditions for aluminium alloy pistons for internal combustion engines
IS 9057 (pdf)
IS 9057 (txt)
1998Automotive Vehicles - Exhaust Emissions - Carbon Monoxide Concentration at Idling for Vehicles Equipped with Spark Ignition Engines - Method of Measurement
IS 9262 (pdf)1979Recommendations for gear positions for road vehicle
IS 9418 (pdf)1980Dimensions for Mounting Flanges for In-line Fuel Injection Pumps for Multi-cylinder Compression Ignition Engines
IS 9420-1 (pdf)1988Feed pumps for diesel fuel injection equipment, Part 1: External dimensions
IS 9420-2 (pdf)1988Feed pumps for diesel fuel injection equipments, Part 2: Types of drive
IS 9465 (pdf)1980Mounting dimensions for inline injection pump assemblies for fuel injection equipment for multi-cylinder compression ignition engines
IS 10000-1 (pdf)
IS 10000-1 (txt)
1980Method of tests for internal combustion engines, Part 1: Glossary of terms relating to test methods
IS 10000-2 (pdf)1980Methods of tests for internal combustion engines, Part 2: Standard reference conditions
IS 10000-3 (pdf)
IS 10000-3 (txt)
1980Methods of tests for intrnal combustion engines, Part 3: Measuremnts for testing-units and limits of accuracy
IS 10000-4 (pdf)1980Methods of Tests for Internal Combustion Engines, Part IV: Declaration of Power, Efficiency, Fuel Consumption and Lubricating Oil Consumption
IS 10000-5 (pdf)1980Methods of tests for intrnal combustion engines, Part 5: Preparation for tests and measurements for wear
IS 10000-6 (pdf)1980Methods of tests for internal combustion engines, Part 6: Recording of test results
IS 10000-7 (pdf)
IS 10000-7 (txt)
1980Methods of tests for internal combustion engines, Part 7: Governing tests for constant speed engines and selection of engines for use with electrical generators
IS 10000-8 (pdf)1980Methods of tests for internal combustion engines, Part 8: Perfornance tests
IS 10000-9 (pdf)
IS 10000-9 (txt)
1980Methods of tests for internal combustion engines, Part 9: Endurance tests
IS 10000-10 (pdf)
IS 10000-10 (txt)
1980Methods of Tests for Internal Combustion Engines, Part 10: Tests for Smoke Levels, Limits and Corrections for Smoke Levels for Variable Speed Compression Ignition Engines
IS 10000-11 (pdf)1980Methods of tests for internal combustion engines, Part 11: Information to be supplied by the purchaser to the manufacturer and information to be supplied by the manufactuer alongwith the engine
IS 10000-12 (pdf)1980Methods of Tests for Internal Combustion Engines, Part XII: Specimen Test Certificates
IS 10000-13 (pdf)2002Methods of Tests for Internal Combustion Engines, Part 13: Recommendations on Nature of Tests Required for Functional Changes in Critical Components
IS 10001 (pdf)
IS 10001 (txt)
1981Performance requirements for constant speed compression ignition (diesel) engines for general purposes (up to 20 kW)ISO 3046
IS 10001 (pdf)1981Performance requirements for constant speed compression ignition (diesel) engines for general purposes (up to 20 kW) (Hindi Edition)ISO 3046
IS 10002 (pdf)
IS 10002 (txt)
1981Performance Requirements for Constant Speed Compression Ignition (Diesel) Engines for General Purposes (Above 20 kW)ISO 3046
IS 10105 (pdf)1982Fittings for cylinder pressure indicators for internal combustion engines
IS 10323 (pdf)1982Cranks and Chain Wheels for Mopeds
IS 10478 (pdf)2007Diesel engines - Fuel injection pumps - Tapers for shaft ends and hubsISO 6519
IS 10533 (pdf)
IS 10533 (txt)
1983Valve guides for internal combustion engines
IS 10651 (pdf)1983Hub Axle, Front for Mopeds
IS 10652 (pdf)1983Pedal Assembly for MopedsISO 7116
IS 10653 (pdf)1983Hub Axle, Rear for Mopeds
IS 11029 (pdf)1984Steering Ball Races for Mopeds
IS 11139 (pdf)1984Adjusters for Control Cables for Mopeds
IS 11170 (pdf)
IS 11170 (txt)
1985Performance Requirements for Constant Speed Compression Ignition (Diesel) Engines For Agricultural Purposes (Up to 20 kw)ISO 3046
IS 11509-1 (pdf)
IS 11509-1 (txt)
1985Methods of Test for Full-flow Lubricating Oil Filters for Internal Combustion Engines, Part 1: Pressure Drop/Flow Characteristics
IS 11509-2 (pdf)
IS 11509-2 (txt)
1985Part 2 Element by-pass characteristics
IS 11509-3 (pdf)
IS 11509-3 (txt)
1985Part 3 Resistance to high pressure drop and to elevated temperature
IS 11509-6 (pdf)
IS 11509-6 (txt)
2006Methods of Test for Full-flow Lubricating Oil Filters for Internal Combustion Engines, Part 6: Cold start simulation and Hydraulic Pulse Durability TestISO 4548-5
IS 11838 (pdf)1986Recommendations for measurement of quality characteristics of gudgeon pins
IS 12022 (pdf)1987Method of Testing Quality Characteristics of Piston Rings
IS 12025 (pdf)1987Recommendations for Measurement of Quality Characteristics for Pistons
IS 12159 (pdf)
IS 12159 (txt)
2007Method of evaluation of accuracy of parameters of steering geometry of automotive vehicles
IS 12352 (pdf)1988Fuel injection pumps mounting bolts
IS 12404 (pdf)1988Coupling for driving fuel injection pumps
IS 12455 (pdf)
IS 12455 (txt)
1988Performance requirements of aircooled spark ignition automotive engines
IS 12460 (pdf)1988Automotive Vehicles - Transmission Systems - Manual Control Sequence in Automatic Transmissions - Recommendations
IS 12499 (pdf)
IS 12499 (txt)
1988Two stage, 0.5 litre diesel fuel filters
IS 12500 (pdf)19880.2 litre diesel fuel filters
IS 12535-1 (pdf)
IS 12535-1 (txt)
1988Automotive vehicles - Transmission systems - Glossary, Part 1: General definitions
IS 12535-2 (pdf)
IS 12535-2 (txt)
1991Automotive vehicles - Tranmission systems - Glossary, Part 2: Universal joints and driveshafts
IS 12535-3 (pdf)1991Automotive vehicles - Transmission systems - Glossary, Part 3: Drive axles definition
IS 12587 (pdf)1989Automotive Vehicles - Transmission System - Gear Arrangement - Recommendations
IS 12902 (pdf)1990Commercial vehicles and buses - Gearbox flanges - Type AISO 7646
IS 12903 (pdf)1990Commercial Vehicle and Buses - Gearbox Flanges - Type SISO 7647
IS 12904 (pdf)
IS 12904 (txt)
1990Flywheel housings for reciprocating internal combustion engines - Nominal dimensions and tolerancesISO 7648
IS 12905 (pdf)1990Commercial Vehicles-couplings Between Power Take-offs (PTO's) and Ancillary Driven UnitsISO 7653
IS 12969 (pdf)
IS 12969 (txt)
1990Internal Combustion Engines - Methods of Test for Quality Characteristics of Valves
IS 12971 (pdf)1990Road Vehicles - Commercial Vehicles - Clearance Envelope for Power Take-offs (PTO)ISO 7706
IS 12972 (pdf)1990Commercial Road Vehicles - Connections for Rear-mounted Power Take-offs (PTO)ISO 7707
IS 12973 (pdf)1990Commercial road vehicles - Side openings for truck power take-offs (PTO)ISO 7804
IS 12978 (pdf)2006Commercial Vehicles and Buses - Cross-tooth Gearbox Flanges - Type TISO 8667
IS 12996 (pdf)
IS 12996 (txt)
1990Internal Combustion Engines - Radiator Pressure Caps
IS 13016 (pdf)
IS 13016 (txt)
1991Internal Combustion Engines - Radiator Drain Cocks
IS 13018 (pdf)
IS 13018 (txt)
1990Internal Combustion Engines - Method of Test for Pressure Charged Engines
IS 13029 (pdf)1991Internal Combustion Engines - Setting Ignition Timing in Spark Ignition Engines - Code of Practice
IS 13050 (pdf)1991Internal Combustion Engines - Valve Seat Inserts
IS 13051 (pdf)
IS 13051 (txt)
1991Internal Combustion Engines - Radiator Fans
IS 13052 (pdf)1991Internal Combustion Engines - Cylinder Liners - Quality Characteristics
IS 13090 (pdf)1991Automotive vehicles - Commercial vehicles - Clutch housings - DimensionsISO 7649
IS 13476 (pdf)
IS 13476 (txt)
2006Automotive vehicles - Mechanical steering gear - Method of test
IS 13686 (pdf)
IS 13686 (txt)
1993Internal combustion engines - Radiators - Method of test
IS 13687 (pdf)
IS 13687 (txt)
1993Internal combustion engines - Radiators - Heat dissipation performance - Method of test
IS 13824 (pdf)1993Internal Combustion Engines - Method of Verification of Emission of Crankcase Gases for Vehicles Powered with Four Stroke Spark Ignition Engines
IS 14269 (pdf)
IS 14269 (txt)
1995Automotive vehicles - Integral power steering gear - Method of test
IS 14273 (pdf)
IS 14273 (txt)
1999Automotive Vehicles - Exhaust Emissions - Gaseous Pollutants from Vehicles Fitted with Compression Ignition Engines - Method of Measurement
IS 14382 (pdf)
IS 14382 (txt)
1996Automotive Vehicles - Speed Limiters - Installed Requirements
IS 14511-1 (pdf)
IS 14511-1 (txt)
2007Diesel engines - Testing of fuel injectors, Part 1: Hand-lever-operated testing and setting apparatusISO 8984-1
IS 14511-2 (pdf)
IS 14511-2 (txt)
2007Diesel engines - Testing of fuel injectors, Part 2: Test methodsISO 8984-2
IS 14511 (pdf)
IS 14511 (txt)
1998Automotive Vehicles - Testing of fuel Injectors - Hand Lever Testing Apparatus
IS 14553 (pdf)
IS 14553 (txt)
2008Automotive vehicles - Apparatus for the measurement of opacity (smoke) of exhaust gas from vehicles equipped with compression ignition engines
IS 14554 (pdf)
IS 14554 (txt)
1998Automotive vehicles - Exhaust emissions - Apparatus for the measurement of carbon monoxide concentration from vehicles equipped with spark ignition engines at idling
IS 14555 (pdf)
IS 14555 (txt)
1998Automotive vehicles - Evaporative Emissions from Vehicles Equipped with Spark Ignition Engines - Method of Measurement
IS 14556 (pdf)
IS 14556 (txt)
1998Automotive vehicles - Catalytic Converters for Spark Ignition Engines - Installed Requirememnts
IS 14599 (pdf)
IS 14599 (txt)
1999Automotive Vehicles - Performance Requirements (Measurement of Power, SFC, Opacity) of Positive and Compression Ignition Engines - Method of Test
IS 14600 (pdf)
IS 14600 (txt)
1999Automotive Vehicles - Exhaust Emissions - Gaseous Pollutants from Vehicles Equipped with Internal Combustion Engines - Method of Measurement
IS 15653 (pdf)
IS 15653 (txt)
2006Reciprocating internal combustion engines - Vocabulary - Terms for engine maintenanceISO 2710-2
IS/ISO 6621-1 (pdf)
IS/ISO 6621-1 (txt)
2007Internal Combustion Engines - Piston Rings, Part 1: VocabularyISO 6621-1
IS/ISO 6621-2 (pdf)
IS/ISO 6621-2 (txt)
2003Internal Combustion Engines - Piston Rings, Part 2: Inspection Measuring PrinciplesISO 6621-2:2003
IS/ISO 8178-4 (pdf)
IS/ISO 8178-4 (txt)
2007Reciprocating Internal Combustion Engines - Exhaust Emission MeasurementISO 8178-4:2007
IS/ISO 8178-7 (pdf)
IS/ISO 8178-7 (txt)
1996Reciprocating Internal Combustion Engines - Exhaust Emission Measurement, Part 7: Engine Family DeterminationISO 8178-7:1996
IS/ISO 8528-1 (pdf)
IS/ISO 8528-1 (txt)
2005Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets, Part 1: Application, Ratings and PerformanceISO 8258-1:2005
IS/ISO 8528-2 (pdf)
IS/ISO 8528-2 (txt)
2005Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets, Part 2: EnginesISO 8258-2:2005
IS/ISO 8528-3 (pdf)
IS/ISO 8528-3 (txt)
2005Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets, Part 3: Alternating Current Generators for Generating SetsISO 8258-3:2005
IS/ISO 8528-4 (pdf)
IS/ISO 8528-4 (txt)
2005Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets, Part 4: Controlgear and SwitchgearISO 8258-4:2005
IS/ISO 8528-5 (pdf)
IS/ISO 8528-5 (txt)
2005Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets, Part 5: Generating SetsISO 8258-5:2005
IS/ISO 8528-6 (pdf)
IS/ISO 8528-6 (txt)
2005Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets, Part 6: Test MethodsISO 8258-6:2005
IS/ISO 8528-7 (pdf)
IS/ISO 8528-7 (txt)
1994Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets, Part 7: Technical Declarations for Specification and DesignISO 8258-7:1994
IS/ISO 8528-8 (pdf)
IS/ISO 8528-8 (txt)
1995Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets, Part 8: Requirements and Tests for Low-Power Generating SetsISO 8258-8:1995
IS/ISO 8528-9 (pdf)
IS/ISO 8528-9 (txt)
1995Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets, Part 9: Measurement and Evaluation of Mechanical VibrationsISO 8258-9:1995
IS/ISO 8528-10 (pdf)
IS/ISO 8528-10 (txt)
1998Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets, Part 10: Measurement of Airborne Noise By the Enveloping Surface MethodISO 8258-10:1998
IS/ISO 8528-12 (pdf)
IS/ISO 8528-12 (txt)
1997Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets, Part 12: Emergency Power Supply to Safety ServicesISO 8258-12:1997

Last Updated: October 9, 2013