Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.
Division Name: Petroleum, Coal and Related Products
Section Name: Plastics (PCD 12)
| Standard | Year | Title | IBR |
|---|---|---|---|
| IS 867 (pdf) IS 867 (txt) | 1963 | Methods of test for phenolic moulding materials | |
| IS 1300 (pdf) IS 1300 (txt) | 1994 | Phenolic moulding materials | |
| IS 1461 (pdf) | 1984 | Plastic Buttons (Thermosetting) | |
| IS 1843 (pdf) IS 1843 (txt) | 1963 | Nylon monofilaments | |
| IS 1998 (pdf) | 1962 | Methods of test for thermosetting synthetic resin bonded laminated sheets | |
| IS 2036 (pdf) | 1995 | Phenolic Laminated Sheets | |
| IS 2046 (pdf) IS 2046 (txt) | 1995 | Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets | |
| IS 2076 (pdf) | 1981 | Unsupported Flexible Polyvinyl Chloride Sheeting | |
| IS 2221 (pdf) | 1962 | Methods of Test for Aminoplastic Moulding Materials | |
| IS 2249 (pdf) IS 2249 (txt) | 1984 | Adhesives (Liquid) for Leather-Beltings | |
| IS 2257 (pdf) | 1989 | Paper Adhesives, Liquid Gum and Office Paste Type-Specification | |
| IS 2267 (pdf) IS 2267 (txt) | 1995 | Polystyrene Moulding and Extrusion Materials | |
| IS 2508 (pdf) IS 2508 (txt) | 1984 | Low Density Polyethylene Films | |
| IS 2530 (pdf) IS 2530 (txt) | 1963 | Methods of test for polyethylene moulding materials and polyethylene compounds | |
| IS 2543 (pdf) IS 2543 (txt) | 1995 | Cellulose Secondary Acetate materials for Moulding and Extrusion | |
| IS 2560 (pdf) IS 2560 (txt) | 1979 | Rubber-based Adhesives for Tubes, Non-curing | |
| IS 2561 (pdf) | 1963 | Rubber-based Adhesives for the Automobile Industry | |
| IS 2562 (pdf) IS 2562 (txt) | 1979 | Rubber-based Adhesives for Tyres and Tubes, Curing | |
| IS 2828 (pdf) | 2001 | Plastics - Vocabulary | ISO 472 |
| IS 2886 (pdf) IS 2886 (txt) | 1991 | Labelling Paste for Paper Labels | |
| IS 3389 (pdf) | 1994 | Urea-formaldehyde Moulding Materials | ISO 2112 |
| IS 3395 (pdf) IS 3395 (txt) | 1997 | Low Density Polyethylene (LDPE) and Liner Low Density Polyethylene (LLDPE) Materials for Moulding and Extrusions | ISO 1872-1 |
| IS 3434 (pdf) IS 3434 (txt) | 1984 | Glossary of Terms for Adhesives and Pressure Sensitive Adhesive Tapes | |
| IS 3447 (pdf) IS 3447 (txt) | 1993 | Shellac Jointing Compound | |
| IS 3669 (pdf) | 1994 | Melamine-Formaldehyde Moulding Materials | ISO 2112 |
| IS 3687 (pdf) IS 3687 (txt) | 1987 | Pressure Sensitive Adhesive Cloth Tapes | |
| IS 3693 (pdf) IS 3693 (txt) | 1966 | Plastic Spectacle Frames | |
| IS 3730 (pdf) IS 3730 (txt) | 1988 | High Density Polyethylene Bucket | |
| IS 3988 (pdf) | 1981 | Guar Gum | |
| IS 4185 (pdf) IS 4185 (txt) | 1989 | Adhesive Paper Tapes | |
| IS 4663 (pdf) IS 4663 (txt) | 1968 | Permanent Rubber-based Adhesives for Footwear Industry | |
| IS 4669 (pdf) | 1968 | Methods of test for polyvinyl chloride resins | |
| IS 4761 (pdf) | 1968 | Unsupported PVC Rainwear | |
| IS 5210 (pdf) | 1995 | High Impact Polystyrene Sheet | |
| IS 5322 (pdf) IS 5322 (txt) | 1988 | High Density Polyethylene Wash-Bowls | |
| IS 5378 (pdf) IS 5378 (txt) | 1994 | Polyethylene Cane | |
| IS 6307 (pdf) | 1985 | Rigid PVC Sheets | |
| IS 6367 (pdf) IS 6367 (txt) | 1971 | Dextrin for Adhesive Industry | |
| IS 6746 (pdf) IS 6746 (txt) | 1994 | Unsaturated Polyester Resin Systems | |
| IS 7166 (pdf) | 1985 | Cellulose Secondary Acetate Flakes | |
| IS 7188 (pdf) IS 7188 (txt) | 1974 | Methods of test for cellulose acetate flakes | |
| IS 7328 (pdf) | 1992 | High Density Polyethylene Materials for Moulding and Extrusion | ISO 1872-1 |
| IS 7393 (pdf) IS 7393 (txt) | 1974 | Adhesive, Bitumen Emulsion | |
| IS 7395 (pdf) IS 7395 (txt) | 1989 | Gum Ghatti | |
| IS 7437 (pdf) IS 7437 (txt) | 1974 | Methods of sampling and test for vegetable adhesives | |
| IS 8402 (pdf) IS 8402 (txt) | 1987 | Methods of Sampling and Test for Pressure Sensitive Adhesive Tapes | |
| IS 8543-1-1 (pdf) IS 8543-1-1 (txt) | 1978 | Methods of testing plastics, Part 1: Characterization of polymer structure and size, Section 1: Determination of molecular mass from viscosity | |
| IS 8543-13-1 (pdf) IS 8543-13-1 (txt) | 1977 | Methods of Testing Plastics, Part 13: Test for Specific Products, Section 1: Buttons (Thermosetting) | |
| IS 9220 (pdf) IS 9220 (txt) | 1979 | Tableware Made of Melamine Plastics | |
| IS 9591 (pdf) IS 9591 (txt) | 1996 | Plasticizer Esters - Methods of sampling and tests | |
| IS 9766 (pdf) IS 9766 (txt) | 1992 | Flexible PVC Compounds | |
| IS 9827 (pdf) IS 9827 (txt) | 1981 | Shoe Adhesive, Natural Rubber Latex Base | |
| IS 9833 (pdf) IS 9833 (txt) | 1981 | List of pigments and colourants for use in plastics in contact with foodstuffs, pharmaceuticals and drinking water | |
| IS 9843 (pdf) IS 9843 (txt) | 1991 | Code of practice for use of adhesives for packaging | |
| IS 9845 (pdf) IS 9845 (txt) | 1998 | Determination of Overall Migration of Constituents of Plastics Materials and Articles Intended to Come in Contact with Foodstuffs - Method of Analysis | |
| IS 9848 (pdf) IS 9848 (txt) | 1987 | Briefcases, Plastic Body | |
| IS 9873-1 (pdf) IS 9873-1 (txt) | 2012 | Safety Requirements for Toys, Part 1: Safety Aspects related to Mechanical and Physical Properties | ISO 8124-1 |
| IS 9873-2 (pdf) IS 9873-2 (txt) | 2012 | SAFETY OF TOYS, Part 2: Flammability | ISO 8124-2 |
| IS 9873-3 (pdf) IS 9873-3 (txt) | 1999 | Safety Requirements for Toys, Part 3: Migration of Certain Elements | ISO 8124-3 |
| IS 10141 (pdf) IS 10141 (txt) | 2001 | Positive List of Constituents of Polyethylene in Contact with Foodstuffs, Pharmaceuticals and Drinking Water | |
| IS 10142 (pdf) IS 10142 (txt) | 1999 | Polystyrene (Crystal and High Impact) for its Safe Use in Contact with Foodstuffs, Pharmaceuticals and Drinking Water Specification | |
| IS 10146 (pdf) IS 10146 (txt) | 1982 | Polyethylene for its Safe Use in Contact with Foodstuffs, Pharmaceuticals and Drinking Water | |
| IS 10148 (pdf) IS 10148 (txt) | 1982 | Positive list of constituents of polyvinyl chloride and its copolymers for safe use in contact with foodstuffs, pharmaceuticals and drinking water | |
| IS 10149 (pdf) IS 10149 (txt) | 1982 | Positive list of constituent of styrene polymers in contact with foodstuffs, pharmaceuticals and drinking water | |
| IS 10151 (pdf) IS 10151 (txt) | 1982 | Polyvinyl Chloride (PVC) and its Copolymers for its Safe Use in Contact with Foodstuffs, Pharmaceuticals and Drinking Water | |
| IS 10171 (pdf) IS 10171 (txt) | 1999 | Guide on Suitability of Plastics for Food Packaging | |
| IS 10734 (pdf) IS 10734 (txt) | 1983 | Case, Vanity, Moulded Body | |
| IS 10815 (pdf) IS 10815 (txt) | 1984 | Code of practice for the application of adhesives in footwear industry | |
| IS 10889 (pdf) IS 10889 (txt) | 2004 | High density polyethylene films | |
| IS 10909 (pdf) IS 10909 (txt) | 2001 | Positive List of Constituents of Polypropylene and its Copolymers in Contact with Foodstuffs, Pharaceuticals and Drinking Water | |
| IS 10910 (pdf) IS 10910 (txt) | 1984 | Polypropylene and its copolymers for its safe use in contact with foodstuffs,pharmaceuticals and drinking water | |
| IS 10951 (pdf) IS 10951 (txt) | 2002 | Polypropylene Materials for Moulding and Extrusion | |
| IS 11022 (pdf) IS 11022 (txt) | 1984 | Methods of sampling and test for glues (bone, skin/fleshings and fish glues) | |
| IS 11273 (pdf) IS 11273 (txt) | 1992 | Woven roving fabrics of 'E' glass fibre | |
| IS 11320 (pdf) | 1997 | Glass fibre rovings for the reinforcement of polyester and of epoxide resin systems | |
| IS 11434 (pdf) IS 11434 (txt) | 1985 | ionomer resins for its safe use in contact with foodstuffs, pharmaceutical and drinking water | |
| IS 11435 (pdf) IS 11435 (txt) | 1985 | Positive list of constituents of ionomer resins for its safe use in contact with foodstuffs, pharmaceuticals and drinking water | |
| IS 11551 (pdf) IS 11551 (txt) | 1996 | Glass fibre chopped strand mat for the reinforcement of epoxy, phenolic and polyester resin systems | |
| IS 11704 (pdf) IS 11704 (txt) | 1986 | ethylene/acrylic acid (EAA) copolymers for their safe use in contact with foodstuffs, pharmaceuticals and drinking water | |
| IS 11705 (pdf) IS 11705 (txt) | 1986 | Positive List of Constituents of Ethylene/acrylic Acid (Eaa) Copolymers for Their Safe Use in Contact with Foodstuffs, Pharmaceuticals and Drinking Water | |
| IS 11988 (pdf) IS 11988 (txt) | 1986 | Hot seal patches | |
| IS 12087 (pdf) IS 12087 (txt) | 1987 | Suitcase for air and submarine crew | |
| IS 12210 (pdf) | 1987 | Caprolactam | |
| IS 12229 (pdf) IS 12229 (txt) | 1987 | Positive list of constituents of polyalkylene terephthalates (PET, PBT) for their safe use in contact with foodstuffs, pharmaceuticals and drinking water | |
| IS 12247 (pdf) | 1988 | nylon-6 polymer for its safe use in contact with foodstuffs pharmaceuticals and drinking water | |
| IS 12248 (pdf) | 1988 | Positive list of constituents of nylon-6 polymer for its safe use in contact with foodstuffs, pharmaceuticals and drinking water | |
| IS 12252 (pdf) IS 12252 (txt) | 1987 | Polyalkylene terephthalates (PET, PBT) for their safe use in contact with foodstuffs, pharmaceuticals and drinking water | |
| IS 12830 (pdf) IS 12830 (txt) | 1989 | Rubber based adhesives for fixing PVC tiles to cement | |
| IS 12994 (pdf) IS 12994 (txt) | 1990 | Epoxy adhesives, room temperature curing General purpose | |
| IS 13055 (pdf) | 1991 | Methods of sampling and test for anaerobic adhesives and sealants | |
| IS 13193 (pdf) | 1992 | Polyalkylene terephthalates (PET and PBT) for moulding and extrusion | |
| IS 13199 (pdf) IS 13199 (txt) | 1991 | Adhesives-Guidelines for surface preparation for adhesive bonding | |
| IS 13254 (pdf) | 1992 | Animal glue for match industry | |
| IS 13255 (pdf) IS 13255 (txt) | 1992 | Adhesive-Liquid-for use on high speed flap gumming and embossed envelope machines | |
| IS 13262 (pdf) IS 13262 (txt) | 1992 | Pressure sensitive adhesive tapes with plastic base | |
| IS 13360-1 (pdf) IS 13360-1 (txt) | 1992 | Plastics - Methods of Testing, Part 1: Introduction | |
| IS 13360-2-1 (pdf) IS 13360-2-1 (txt) | 1992 | Plastics - Methods of test, Part 2: Sampling and preparation of test specimens, Section 1: Compression moulding test specimens of thermoplastics materials | |
| IS 13360-2-2 (pdf) | 1995 | Plastics - Methods of Testing, Part 2: Sampling and Preparation of Test Specimens, Section 2: Compression Moulded Test Specimens of Thermoplastic Materials | IS 295 |
| IS 13360-2-2 (pdf) IS 13360-2-2 (txt) | 2013 | Plastics - Methods of Testing, Part 2: Sampling and Preparation of Test Specimens, Section 2: Compression Moulded Test Specimens of Thermoplastic Materials | ISO 295:2004 |
| IS 13360-2-3 (pdf) IS 13360-2-3 (txt) | 2000 | Plastics - Methods of Testing, Part 2: Sampling and Preparation of Test Specimens, Section 3: Injection Moulding of Test Specimens of Thermoplastic Materials - General Principles | ISO 294-1 |
| IS 13360-2-4 (pdf) IS 13360-2-4 (txt) | 1999 | Plastics - Methods of Testing, Part 2: Sampling and Preparation of Test Specimens, Section 4: Preparation of Test Specimens by Machining | ISO 2818 |
| IS 13360-2-5 (pdf) IS 13360-2-5 (txt) | 1997 | Plastics - Methods of Testing, Part 2: Sampling and Preparation of Test Specimens, Section 5: Multipurpose Test Specimens | ISO 3167 |
| IS 13360-2-5 (pdf) IS 13360-2-5 (txt) | 2013 | Plastics - Methods of Testing, Part 2: Sampling and Preparation of Test Specimens, Section 5: Multipurpose Test Specimens | ISO 3167:2002 |
| IS 13360-2-7 (pdf) IS 13360-2-7 (txt) | 2000 | Plastics - Methods of Testing, Part 2: Sampling and Preparation of Test Specimens, Section 7: Injection Moulding of Test Specimens of Thermoplastic Materials - Small Plates | ISO 294-3 |
| IS 13360-2-9 (pdf) IS 13360-2-9 (txt) | 2000 | Plastics - Methods of Testing, Part 2: Sampling and Preparation of Test Specimens, Section 9: Injection Moulding of Test Specimens of Thermoplastic Materials - Small Tensile Bars | ISO 294-2 |
| IS 13360-2-10 (pdf) IS 13360-2-10 (txt) | 2006 | Plastics - Methods of testing, Part 2: Sampling and preparation of test speciments , Section 10 Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - General principles and moulding of multipurpose test specimens | |
| IS 13360-2-11 (pdf) IS 13360-2-11 (txt) | 2006 | Plastics - Methods of testing, Part 2: Sampling and preparation of test speciments , Section 11 Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Small principles and moulding of multipurpose test specimens | |
| IS 13360-3-1 (pdf) IS 13360-3-1 (txt) | 1995 | Plastics - Methods of Testing, Part 3: Physical and Dimensional Properties, Section 1: Determination of Density and Relative Density of Non-Cellular Plastics | ISO 1183 |
| IS 13360-3-2 (pdf) | 1997 | Plastics - Methods of Testing, Part 3: Physical and Dimensional Properties, Section 2: Determination of Apparent Density of Material that can be Poured from a Specified Funnel | ISO 60 |
| IS 13360-3-3 (pdf) | 1997 | Plastics - Methods of Testing, Part 3: Physical and Dimensional Properties, Section 3: Determination of Apparent Density of Moulding material that can not be poured from a specified funnel [Superseding IS 8543 | ISO 61 |
| IS 13360-3-4 (pdf) | 1995 | Plastics - methods of testing, Part 3: Physical and dimensional properties, Section 4: Determination of bulk sector of moulding materials | ISO 171 |
| IS 13360-3-5 (pdf) IS 13360-3-5 (txt) | 1995 | Plastics - methods of testing, Part 3: Physical and dimensional properties, Section 5: Determination of shrinkage of thermosetting moulding materials | ISO 2577 |
| IS 13360-3-5 (pdf) IS 13360-3-5 (txt) | 2013 | Plastics - methods of testing, Part 3: Physical and dimensional properties, Section 5: Determination of shrinkage of thermosetting moulding materials | ISO 2577:2007 |
| IS 13360-3-6 (pdf) IS 13360-3-6 (txt) | 2000 | Plastics - Methods of Testing, Part 3: Physical and Dimensional Properties, Section 6: Film and Sheeting - Determination of Average Thickness of a Sample, and Average Thickness | ISO 4591 |
| IS 13360-3-7 (pdf) | 1999 | Plastics - Methods of testing, Part 3: Physical and dimensional properties, Section 7: Liquid resins - Determination of density by the pyknometer method | ISO 1675 |
| IS 13360-3-9 (pdf) IS 13360-3-9 (txt) | 1999 | Plastics - Methods of Testing, Part 3: Physical and Dimensional Properties, Section 9: Determination of Moisture in Plastics by Coulometric Regeneration of Phosphorus Pentoxide | |
| IS 13360-4-1 (pdf) IS 13360-4-1 (txt) | 2000 | Plastics - Methods of Testing, Part 4: Rheological Properties, Section 1: Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics | ISO 1133 |
| IS 13360-4-2 (pdf) | 1999 | Plastics - Methods of Testing, Part 4: Rheological Properties : Section 2 Cup Flow of Phenolic and Alkyd Moulding Materials | |
| IS 13360-4-3 (pdf) IS 13360-4-3 (txt) | 2004 | Plastics - Methods of testing, Part 4: Rheological properties, Section 3: Determination of spiral flow of low-pressure thermosetting moulding compounds | |
| IS 13360-4-4 (pdf) IS 13360-4-4 (txt) | 1999 | Plastics - Methods of Testing, Part 4: Rheological Properties, Section 4: Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer | |
| IS 13360-4-5 (pdf) IS 13360-4-5 (txt) | 2000 | Plastics - Methods of Testing, Part 4: Rheological Properties, Section 5: Determination of the Fluidity of Plastics Using Capillary and Slit-Die Rheometers | |
| IS 13360-5-1 (pdf) IS 13360-5-1 (txt) | 1996 | Plastics - Methods of Testing, Part 5: Mechanical Properties, Section 1: Determination of Tensile Properties - General Principles | ISO 527-1 |
| IS 13360-5-2 (pdf) IS 13360-5-2 (txt) | 1996 | Plastics - Methods of Testing, Part 5: Mechanical Properties, Section 2: Determination of Tensile Properties - Test Conditions for Moulding and Extrusion Plastics | ISO 527-2 |
| IS 13360-5-3 (pdf) IS 13360-5-3 (txt) | 1999 | Plastics - Methods of testing, Part 5: Mechanical Properties , Section 3 Determination of tensile properties - Test conditions for films and sheets | |
| IS 13360-5-4 (pdf) IS 13360-5-4 (txt) | 1996 | Plastics - Methods of Testing, Part 5: Mechanical Properties, Section 4: Determination of Izod Impact Strength | ISO 180 |
| IS 13360-5-4 (pdf) IS 13360-5-4 (txt) | 2013 | Plastics - Methods of Testing, Part 5: Mechanical Properties, Section 4: Determination of Izod Impact Strength | ISO 180 |
| IS 13360-5-5 (pdf) IS 13360-5-5 (txt) | 1996 | Plastics - Methods of Testing, Part 5: Mechanical Properties, Section 5: Determination of Charpy Impact Strength | ISO 179 |
| IS 13360-5-6 (pdf) IS 13360-5-6 (txt) | 1999 | Plastics - Methods of Testing, Part 5: Mechanical Properties, Section 6: Determination of Impact Resistance by the Free-Falling Dart Method - Staircase Methods | ISO 7765-1 |
| IS 13360-5-7 (pdf) IS 13360-5-7 (txt) | 1996 | Plastics - Methods of Testing, Part 5: Mechanical Properties, Section 7: Determination of Flexural Properties | ISO 178 |
| IS 13360-5-8 (pdf) IS 13360-5-8 (txt) | 1996 | Plastics - Methods of Testing, Part 5: Mechanical Properties, Section 8: Determination of Compressive Properties | ISO 604 |
| IS 13360-5-8 (pdf) IS 13360-5-8 (txt) | 2013 | Plastics - Methods of Testing, Part 5: Mechanical Properties, Section 8: Determination of Compressive Properties | ISO 604:2002 |
| IS 13360-5-10 (pdf) IS 13360-5-10 (txt) | 1996 | Plastics - Methods of Testing, Part 5: Mechanical Properties, Section 10: Determination of Tear Resistance of Plastics Films and Sheeting - Trouser Tear Method | ISO 6383-1 |
| IS 13360-5-11 (pdf) IS 13360-5-11 (txt) | 1992 | Plastics - Methods of Testing, Part 5: Mechanical Properties, Section 11: Determination of Indentation Hardness of Plastics by Means of Durometer (Shore Hardness) | ISO 868:1985 |
| IS 13360-5-11 (pdf) IS 13360-5-11 (txt) | 2013 | Plastics - Methods of Testing, Part 5: Mechanical Properties, Section 11: Determination of Indentation Hardness of Plastics by Means of Durometer (Shore Hardness) | ISO 868:2003 |
| IS 13360-5-12 (pdf) | 1992 | Plastics - Methods of Testing, Part 5: Mechanical Properties, Section 12: Determination of Ball Indentation Hardness | |
| IS 13360-5-13 (pdf) IS 13360-5-13 (txt) | 1992 | Plastics - Methods of Testing, Part 5: Mechanical Properties, Section 13: Determination of Rockwell Hardness | |
| IS 13360-5-14 (pdf) IS 13360-5-14 (txt) | 2001 | Plastics - Methods of Testing, Part 5: Mechanical Properties, Section 14: Determination of Indentation Hardness of Rigid Plastic by Means of Barcol Impressor | |
| IS 13360-5-19 (pdf) IS 13360-5-19 (txt) | 1999 | Plastics - Methods of Testing, Part 5: Mechanical Properties, Section 19: Determination of Resistance of Plastic Materials to Abrasion | |
| IS 13360-5-22 (pdf) IS 13360-5-22 (txt) | 1999 | Plastics - Methods of Testing, Part 5: Mechanical Properties, Section 22: Determination of Resistance to Wear by Abrasive Wheels | ISO 9395 |
| IS 13360-5-23 (pdf) IS 13360-5-23 (txt) | 1996 | Plastics - Methods of Testing, Part 5: Mechanical Properties, Section 23: Determination of Tear resistance of Plastics Film and Sheeting - Elmendorf Method | |
| IS 13360-5-24 (pdf) IS 13360-5-24 (txt) | 1999 | Plastics - Methods of testing, Part 5: Mechanical properties, Section 24: Determination impact resistance by the free falling dart method - Instrumental puncture test | ISO 7765-2 |
| IS 13360-5-25 (pdf) IS 13360-5-25 (txt) | 2004 | Plastic - Methods of Testing, Part 5: Mechanical Properties, Section 25: Determination of Tensile Properties - Test Conditions for Isotropic and Orthotropic Fibre-Reinforced Plastic Composites | ISO 527-4 |
| IS 13360-5-26 (pdf) IS 13360-5-26 (txt) | 2004 | Plastics - Methods of Testing, Part 5: Mechanical Properties, Section 26: Determination of Tensile Properties - Test Conditions for Unidirectional Fibre-Reinforced Plastic Composit | ISO 527-5 |
| IS 13360-6-1 (pdf) IS 13360-6-1 (txt) | 1999 | Plastics - Methods of testing, Part 6: Thermal Properties, Section 1: Determination of vicat softening temperature of thermoplastic materials | ISO 306 |
| IS 13360-6-3 (pdf) IS 13360-6-3 (txt) | 1997 | Plastics - Methods of testing, Part 6: Thermal Properties, Section 3: Determination of temperature of deflection under load - General test method | ISO 75-1 |
| IS 13360-6-4 (pdf) IS 13360-6-4 (txt) | 1997 | Plastics - Methods of Testing, Part 6: Thermal properties, Section 4: Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source | ISO 1210 |
| IS 13360-6-5 (pdf) IS 13360-6-5 (txt) | 2001 | Plastics - Methods of Testing, Part 6: Thermal Properties, Section 5: Determination of Flammability of Plastic Materials for Parts and Devices in Appliances | |
| IS 13360-6-6 (pdf) IS 13360-6-6 (txt) | 2001 | Plastics - Methods of Testing, Part 6: Thermal Properties, Section 6: Flammability by Oxygen Index - Guidance | ISO 4589-1 |
| IS 13360-6-9 (pdf) IS 13360-6-9 (txt) | 2001 | Plastics - Methods of Testing, Part 6: Thermal Properties, Section 9: Determination of Density of Smoke from the Burning or Decomposition of Plastics | |
| IS 13360-6-10 (pdf) IS 13360-6-10 (txt) | 1992 | Plastics - Methods of testing, Part 6: Thermal Properties, Section 10: Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers | |
| IS 13360-6-11 (pdf) IS 13360-6-11 (txt) | 2004 | Plastics - Methods of Testing, Part 6: Thermal Properties, Section 11: Determination of the Brittleness Temperature by Impact | ISO 974 |
| IS 13360-6-14 (pdf) IS 13360-6-14 (txt) | 2004 | Plastics - Methods of Testing, Part 6: Thermal Properties, Section 14: Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics between -30°C and 30°C with a Vitreous Silica Dilatometer | |
| IS 13360-6-17 (pdf) IS 13360-6-17 (txt) | 1997 | Plastics - Methods of Testing, Part 6: Thermal Properties, Section 17: Determination of Temperature of Defection Under Load - Plastics and Ebonite | ISO 75-2 |
| IS 13360-6-18 (pdf) IS 13360-6-18 (txt) | 1997 | Plastics - Methods of - Part : 6 Thermal Properties Testing Section : 18 Determination of Temperature of Deflection Under Load - High Strength Thermosetting Laminates and Long-Fibre Reinforced Plastics | ISO 75-3 |
| IS 13360-6-18 (pdf) IS 13360-6-18 (txt) | 2013 | Plastics - Methods of - Part : 6 Thermal Properties Testing Section : 18 Determination of Temperature of Deflection Under Load - High Strength Thermosetting Laminates and Long-Fibre Reinforced Plastics | ISO 75-3:2004 |
| IS 13360-6-19 (pdf) IS 13360-6-19 (txt) | 2001 | Plastics - Methods of Testing, Part 6: Thermal Properties, Section 19: Flammability by Oxygen Index - Ambient Temperature Test | IS 4589-2 |
| IS 13360-6-20 (pdf) IS 13360-6-20 (txt) | 2001 | Plastics - Methods of Testing, Part 6: Thermal Properties, Section 20: Flammability by Oxygen Index - Elevated Temperature Test | IS 4589-3 |
| IS 13360-6-21 (pdf) IS 13360-6-21 (txt) | 2004 | Plastics - Methods of testing : Part 6 Thermal properties, Section 21 Determination of ignition temperature using a hot-air furnace | ISO 871 |
| IS 13360-6-22 (pdf) IS 13360-6-22 (txt) | 2006 | Plastics - Methods of testing, Part 6: Thermal properties, Section 22: Determination of time-temperature limits after prolonged exposure to hear | ISO 2785 |
| IS 13360-6-23 (pdf) IS 13360-6-23 (txt) | 2006 | Plastics - Methods of testing, Part 6: Thermal properties, Section 23: Determination of burning behaviour of thin flexible vertical specimens in contact with small-flame ignition source | |
| IS 13360-7-1 (pdf) IS 13360-7-1 (txt) | 1996 | Plastics - Methods of Testing, Part 7: Electrical Properties, Section 1: Measurement of Resistivity of Conductive Plastics | ISO 3915 |
| IS 13360-8-1 (pdf) IS 13360-8-1 (txt) | 1997 | Plastics - Methods of Testing, Part 8: Permanence/chemical Properties, Section 1: Determianation of Water Absorption | ISO 62 |
| IS 13360-8-2 (pdf) IS 13360-8-2 (txt) | 2004 | Plastics - Methods of Testing, Part 8: Permanence/Chemical Properties, Section 2: Polymer Dispersions and Rubber Latices - Determination of Ph | ISO 976 |
| IS 13360-8-3 (pdf) IS 13360-8-3 (txt) | 1997 | Plastics - Methods of Testing, Part 8: Permanence/Chemical Properties, Section 3: Determination of the effects of liquid chemicals, including water | ISO 175 |
| IS 13360-8-4 (pdf) IS 13360-8-4 (txt) | 1997 | Plastics - Methods of Testing, Part 8: Permanence/Chemical Properties, Section 4: Determination of Loss of Plasticizers - Activated Carbon Method | ISO 176 |
| IS 13360-8-5 (pdf) IS 13360-8-5 (txt) | 1997 | Plastics - Methods of Testing, Part 8: Permanence/Chemical Properties, Section 5: Determination of Migration of Plasticizers | ISO 177 |
| IS 13360-8-6 (pdf) IS 13360-8-6 (txt) | 1997 | Plastics - Methods of Testing, Part 8: Permanence/Chemical Properties, Section 6: Determination of Gas Transmission Rate of Films and Thin Sheets under Atmospheric Pressure - Manometric Method | ISO 2556 |
| IS 13360-8-8 (pdf) IS 13360-8-8 (txt) | 2004 | Plastics - Methods of Testing, Part 8: Permanence/Chemical Properties, Section 8: Determination of Ash - General Methods | ISO 3451-1 |
| IS 13360-8-9 (pdf) IS 13360-8-9 (txt) | 1997 | Plastics - Methods of Testing, Part 8: Permanence/Chemical Properties, Section 9: Determination of Resistance to Environmental Stress Cracking (ESC) - Bent Strip Method | ISO 4599 |
| IS 13360-8-10 (pdf) IS 13360-8-10 (txt) | 1999 | Plastics - Methods of Testing, Part 8: Permanence/Chemical Properties, Section 10: Determination of Environmental Stress Cracking (ESC) - Ball or Pin Impression Method | |
| IS 13360-8-11 (pdf) IS 13360-8-11 (txt) | 1999 | Plastics - Methods of Testing, Part 8: Permanence/Chemical Properties, Section 11: Determination of Environmental Stress Cracking (ESC) - Constant-Tensile Stress Method | |
| IS 13360-8-13 (pdf) IS 13360-8-13 (txt) | 2004 | Plastics - Methods of Testing, Part 8: Permanences/Chemical Properties, Section 13: Determination of Changes in colour and Veriations in Properties after Exposure to Dyalight Under Glass, Natural | ISO 4582 |
| IS 13360-8-14 (pdf) IS 13360-8-14 (txt) | 2005 | Plastics - Methods of Testing, Part 8: Permanences/Chemical Properties, Section 14: Determination of the Effects of Exposure to Damp Heat, Water Spray and Salt Mist | |
| IS 13360-9-1 (pdf) IS 13360-9-1 (txt) | 2004 | Plastics - Methods of testing, Part 9: Optical Properties, Section 1: Determination of refractive index | ISO 489 |
| IS 13360-9-4 (pdf) IS 13360-9-4 (txt) | 1997 | Plastics - Methods of Testing, Part 9: Optical properties, Section 4: Qualitative evaluation of the bleeding of colorants | ISO 183 |
| IS 13360-9-5 (pdf) IS 13360-9-5 (txt) | 1999 | Plastics - Methods of Testing, Part 9: Optical Properties, Section 5: Determination of Haze and Luminous Transmittance of Transparent Plastics | |
| IS 13360-9-7 (pdf) IS 13360-9-7 (txt) | 2001 | Plastics - Methods of Testing, Part 9: Optical Properties, Section 7: Determination of Specular Gloss of Plastic Films and Solid Plastics | |
| IS 13360-9-8 (pdf) IS 13360-9-8 (txt) | 2001 | Plastics - Methods of Testing, Part 9: Optical Properties, Section 8: Determination of Transparency of Plastic Sheeting | |
| IS 13360-9-9 (pdf) IS 13360-9-9 (txt) | 2001 | Plastics - Methods of Testing, Part 9: Optical Properties, Section 9: Determination of Yellow Index of Plastics | |
| IS 13360-10-4 (pdf) IS 13360-10-4 (txt) | 2001 | Plastics - Methods of Testing, Part 10: Thermosetting Properties, Section 4: Determination of Gel Time and Peak Exothermic Temperature of Reacting | |
| IS 13360-10-5 (pdf) IS 13360-10-5 (txt) | 2004 | Plastics - Methods of Testing, Part 10: Resin (Thermosetting Properties), Section 5: Phenol-Formaldehyde Mouldings - Determination of Free Phenols - Iodometric Method | ISO 119 |
| IS 13360-10-6 (pdf) IS 13360-10-6 (txt) | 2004 | Plastics - Methods of testing, Part 10: Resin (thermosetting properties), Section 6 Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - colorimetric comparison method | ISO 120 |
| IS 13360-10-7 (pdf) IS 13360-10-7 (txt) | 2004 | Plastics - Methods of Testing, Part 10: Resin (Thermosetting Properties), Section 7: Phenol-Formaldehyde Mouldings - Determination of Acetone-Soluble Matter (Apparent Resin Content of Material | ISO 308 |
| IS 13360-11-1 (pdf) IS 13360-11-1 (txt) | 1999 | Plastics - Methods of Testing, Part 11: Special Properties, Section 1: Film and Sheeting - Determination of Coefficients of Friction | ISO 8295 |
| IS 13360-11-3 (pdf) IS 13360-11-3 (txt) | 2000 | Plastics - Methods of Testing, Part 11: Special Properties, Section 3: Film and Sheeting - Determination of Blocking Resistance | ISO 11502 |
| IS 13360-11-4 (pdf) | 1999 | Plastics - Methods of Testing, Part 11: Special Properties : Section 4 Determination of Gel Count of Plastics Film | |
| IS 13360-11-5 (pdf) IS 13360-11-5 (txt) | 2001 | Plastics - Methods of Testing, Part 11: Special Properties, Section 5: Determination of White Point Temperature and Minimum Film-Forming Temperature | ISO 2115 |
| IS 13360-11-7 (pdf) IS 13360-11-7 (txt) | 1997 | Plastics - Methods of Testing, Part 11: Special properties, Section 7: Determination of matter extractable by organic solvents (Conventional methods) | ISO 6427 |
| IS 13360-11-9 (pdf) IS 13360-11-9 (txt) | 2004 | Plastics - Methods of testing, Part 11: Special propertiex, Section 9: Determination of the viscosity of polymers in dilute solution using capillary viscometers - General Principles | ISO 1628 -1 |
| IS 13360-11-10 (pdf) IS 13360-11-10 (txt) | 1999 | Plastics - Methods of Testing, Part 11: Special Properties, Section 10: Resins in the Liquid State or as Emulsions or Dispersions - Determination of Apparent Viscosity by the Brookfield Test Method | ISO 2555 |
| IS 13360-11-11 (pdf) IS 13360-11-11 (txt) | 1999 | Plastics - Methods of Testing, Part 11: Special Properties, Section 11: Polymers/Resins in the Liquid State or as Emulsions or Dispersions - Determin | ISO 3219 |
| IS 13360-11-13 (pdf) IS 13360-11-13 (txt) | 2006 | Plastics - Methods of testing, Part 11: Special properties, Section 13: Film and sheeting - Determination of cold-crack temperature | |
| IS 13360-11-14 (pdf) IS 13360-11-14 (txt) | 2006 | Plastics - Methods of Testing, Part 11: Special Properties, Section 14: Film and Sheeting - Determination of Dimensional Change on Heating | |
| IS 13360-11-15 (pdf) IS 13360-11-15 (txt) | 2006 | Plastics - Methods of testing, Part 11: Special properties, Section 15: Determination of viscosity using a falling-ball viscometer - inclined-tube method | |
| IS 13410 (pdf) IS 13410 (txt) | 1992 | Glass reinforced polyester sheet moulding compounds (SMC) | |
| IS 13411 (pdf) IS 13411 (txt) | 1992 | Glass reinforced polyester dough moulding compounds (DMC) | |
| IS 13449 (pdf) IS 13449 (txt) | 1992 | Positive list of constituents of ethylene vinyl acetate (EVA) copolymers in contact with foodstuffs, pharmaceuticals and drinking water | |
| IS 13463 (pdf) IS 13463 (txt) | 1992 | Polyamide (nylon 6) material for moulding and extrusion | |
| IS 13464 (pdf) | 1992 | Polyamide (nylon 66) materials for moulding and extrusion | |
| IS 13576 (pdf) IS 13576 (txt) | 1992 | Ethylene menthacrylic acid (EMAA) copolymers and terpolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water | |
| IS 13577 (pdf) IS 13577 (txt) | 1992 | Positive list of constituents of ethylene methacrylic acid (EMAA) copolymers and terpolymers in contact with foodstuffs, pharmaceuticals and drinking water | |
| IS 13601 (pdf) IS 13601 (txt) | 1993 | Ethylene vinyl acetate (EVA) copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water | |
| IS 13653 (pdf) | 1992 | Anaerobic Jointing Compounds for Use in Liquefied Petroleum Gas Appliances and Installations | |
| IS 13959 (pdf) | 1994 | Polypropylene Sutli | |
| IS 13960 (pdf) IS 13960 (txt) | 1994 | Thermoplastic strappings | |
| IS 14182 (pdf) | 1994 | Solvent cement for use with unplasticized polyvinylchloride plastic pipe and fittings | |
| IS 14421 (pdf) | 1997 | Plasticizer esters | |
| IS 14425 (pdf) IS 14425 (txt) | 1997 | Guide for manufacture of glass reinforced polyester resin mouldings | |
| IS 14426 (pdf) IS 14426 (txt) | 1997 | Chlorinated Paraffins (CP) | |
| IS 14434 (pdf) IS 14434 (txt) | 1998 | Polycarbonate Moulding and Extrusion Materials | |
| IS 14443 (pdf) IS 14443 (txt) | 1997 | Polycarbonate sheets | |
| IS 14500 (pdf) IS 14500 (txt) | 1998 | Linear low density polyethylene (LLDPE) films | |
| IS 14534 (pdf) IS 14534 (txt) | 1998 | Guidelines for recycling of plastics | |
| IS 14535 (pdf) | 1998 | Recycled plastics for the manufacturing of products - Designation | |
| IS 14635 (pdf) IS 14635 (txt) | 1999 | Polytetrafluoroethylene (PTFE) Materials for Moulding and Extrusion | |
| IS 14643 (pdf) IS 14643 (txt) | 1999 | Unsintered Polytetrafluoroethylene (PTFE) Tape for Thread Sealing Applications | |
| IS 14752 (pdf) IS 14752 (txt) | 2000 | Melamine Formaldehyde Resins to Improve Wet Strength of Paper | |
| IS 14753 (pdf) IS 14753 (txt) | 1999 | Polymethyl Methacrylate (PMMA) (Acrylic) Sheets | |
| IS 14971 (pdf) IS 14971 (txt) | 2001 | Polycorbonate Resins for its Safe use in Contact with Foodstuffs, Pharmaceuticals and Drinking Water | |
| IS 14972 (pdf) IS 14972 (txt) | 2001 | Positive List of Constituents of Polycarbonate Resins in Contact with Foodstuffs, Pharmaceuticals and Drinking Water | |
| IS 14995 (pdf) IS 14995 (txt) | 2001 | Stretch Cling Films | |
| IS 14996 (pdf) IS 14996 (txt) | 2001 | Positive List of Constituents of Modified Poly (Phenylene Oxide) (PPO) in Contact with Foodstuffs, Pharmaceuticals and Drinking Water | |
| IS 14997 (pdf) IS 14997 (txt) | 2001 | Modified Poly (Pheneylene Oxide) (PPO) Resins for its sage use in Contact with Foodstuffs, Pharmaceuticals and Drinking Water | |
| IS 14998 (pdf) IS 14998 (txt) | 2001 | Positve List of Constituents of Melamine-Formaldehyde Resins in Contact with Foodstuffs, Pharmaceuticals and Drinking Water | |
| IS 14999 (pdf) IS 14999 (txt) | 2001 | Melamine-Formaldehyde Resins for its Safe use in Contact with Foodstuffs, Pharmaceuticals and Drinking Water - Specfication | |
| IS 15225 (pdf) IS 15225 (txt) | 2002 | Chlorinated Polyvinyl Chloride Compounds Used for Pipes and Fittings | |
| IS 15226 (pdf) IS 15226 (txt) | 2002 | Rigid Polyvinyl Chloride (PVC) Compounds | |
| IS 15477 (pdf) IS 15477 (txt) | 2004 | Adhesives for Use with Ceramic Tiles and Mosaics | ISO 5893 |
| IS 15559 (pdf) IS 15559 (txt) | 2004 | Polyester Strapping | |
| IS 15621 (pdf) IS 15621 (txt) | 2005 | Terabromobisphenol-A | |
| IS 15623 (pdf) IS 15623 (txt) | 2005 | Melamine (2 , 4, 6 triamino 1, 3, 5 triazine) | |
| IS/ISO 14851 (pdf) IS/ISO 14851 (txt) | 1999 | Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer | ISO 14851:1999 |
| IS/ISO 14852 (pdf) IS/ISO 14852 (txt) | 1999 | Determination of ultimate aerobic diodegradability of plastic materials in and aqueous medium - Method by analysis of evolved carbon dioxide | ISO 14852:1999 |
| IS/ISO 14853 (pdf) IS/ISO 14853 (txt) | 2005 | Determination of ultimate aerobic diodegradability of plastic materials in and aqueous medium - Method by Measurement of biogas production | ISO 14853:2005 |
| IS/ISO 14855-2 (pdf) IS/ISO 14855-2 (txt) | 2007 | Determination of ultimate aerobic diodegradability of plastic materials under controlled compositing conditions - Method by analysis of evolved carbon dioxide, Part 1: Gravimetric measurement of carbon dioxide evolved in laboratory - Scale test | ISO 14855-2:2007 |
| IS/ISO 15985 (pdf) IS/ISO 15985 (txt) | 2004 | Plastics - Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-degistion conditions - method by analysis of releases biogas | ISO 15985:2004 |
| IS/ISO 16929 (pdf) IS/ISO 16929 (txt) | 2002 | Plastics - Determination of the Degree of Disintegration of Plastic Materials Under Defined Composting Conditions in A Pilot-Scale Test | ISO 16929:2002 |
| IS/ISO 17088 (pdf) IS/ISO 17088 (txt) | 2008 | Specifications for compostable plastics | ISO 17088:2008 |
| IS/ISO 17556 (pdf) IS/ISO 17556 (txt) | 2003 | Plastics - Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved | ISO 17556:2003 |
| IS/ISO 20200 (pdf) IS/ISO 20200 (txt) | 2004 | Plastics - Determination of disintegration of plastic materials under simulated compositing conditions in a laboratory-scale test | ISO 20200:2004 |
Last Updated: December 28, 2013
↑