Divisional Index ↑

Public Safety Standards of the Republic of India

Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.

Division Name: Medical Equipment and Hospital Planning
Section Name: Dentistry (MHD 8)

StandardYearTitleIBR
IS 3875 (pdf)1983Hot Plate, Wax Levelling, Dental
IS 3876 (pdf)1985Knife, Plaster, Dental
IS 3877 (pdf)1967Wax Knife, Dental
IS 3878 (pdf)
IS 3878 (txt)
1967Shears, Plaster, Dental
IS 3879 (pdf)1967Spatula, Wax, Dental, No. 1
IS 3887 (pdf)1978General requirements for cutting type dental instruments
IS 3888 (pdf)1987Spatula, Stainless Steel, Dental
IS 3889 (pdf)1985Chisels, Dental
IS 3890-1 (pdf)1986Instruments, Plastic Filling, Dental, Part 1: Designation Numbers 1, 3, 4, 5 and 6
IS 3890-2 (pdf)
IS 3890-2 (txt)
1967Instruments, Plastic Filling, Dental, Part II: Designation Numbers 12, 20, 21, 46, 47, 153 and 183
IS 4313 (pdf)1985Specification for Pliers, Plate, Dental
IS 4314 (pdf)1991Orthodontic pliers, Cone Socket - Shapes, Dimensions and Tests
IS 4315 (pdf)1985Specification for Pliers, Bar Bending, Dental, Waldsach's Type
IS 4316 (pdf)1991Orthodontic pliers, snipe nose - Shape,dimensions and tests
IS 4319-1 (pdf)1986Pliers, Stretching and Contouring, Dental, Part 1: Pliers, Stretching and Contouring
IS 4319-2 (pdf)1986Pliers, Stretching and Contouring, Dental, Part 2: Pliers, contouring
IS 4679 (pdf)1968Spatula, Plaster, Dental, Curved and Straight
IS 4680 (pdf)1968Spatula, Wax, Dental, No. 2
IS 4714 (pdf)1985Scalers, Dental, no. SC 1/2, 3/4 and 5/6
IS 4715 (pdf)
IS 4715 (txt)
1968Excavators, Dental, No. EX 1/2, 3/4, 5/6, 7/8, 9/10, 11/12 and 13/14
IS 4975 (pdf)1986Elevators, Dental, No. 1, 2 and 3
IS 4976 (pdf)1987Forceps Extraction, Dental, Upper Anteriors, No. 1 and 2
IS 4977 (pdf)1968Forceps, Extraction, Dental, Lower Molar, Hawk's Bill, No. 1
IS 5004 (pdf)1968Spoons, Cutting Dental, No. 1/2, 3/4 and 5/6
IS 5005 (pdf)1968Burnisher, Dental, No. Brn 1/2
IS 5017 (pdf)1968Carvers, Dental, No. Car 1/2, 3/4 and 5/6
IS 5023 (pdf)
IS 5023 (txt)
2003Dental Units
IS 5178 (pdf)1969Gingival Margin Trimmers, Dental, No. GMT 1/2, 3/4, 5/6 and 7/8
IS 5179 (pdf)1986Pluggers, Root Canal, Dental, No. PLG 1, 2 and 3
IS 5180 (pdf)1969Needles, Hypodermic, Dental
IS 5181 (pdf)1969Press, Flask, Dental
IS 5185 (pdf)1969Articulators, Dental
IS 5211 (pdf)1969Scissors, Dental No. 1, Straight and Curved on Flat
IS 5212 (pdf)1969Scissors, Crown, Dental, Straight and Curved on Flat
IS 5217 (pdf)1969Clamp, Flask, Dental
IS 5227 (pdf)1969Flask, dental
IS 5540 (pdf)1970Specification for Pliers, Band Forming, Dental
IS 5541 (pdf)1970Spatula, Plastics, Clear and Colorless, Dental
IS 5576 (pdf)1985Carriers, Amalgam, Dental, No. 1 and 2
IS 5582 (pdf)1986Mandrels, Dental, No, 1, 2 and 3
IS 5584 (pdf)1970Syringe, Hypodermic, Cartridge, Dental, Pivot Breech Cap Type
IS 5763 (pdf)1970Occlusal Plane Guide, Dental
IS 5794 (pdf)1986Pliers, Pin-roughening and Bending, Dental
IS 5795 (pdf)1991Orthodontic pliers, Crown and ligating, Howe's pattern - Shape, dimensions and tests
IS 5828 (pdf)1991Orthodontic Pliers, Workroom - Shapes, Dimensions and Tests
IS 5879 (pdf)1970Punch, Rubber Dam, Dental
IS 5941 (pdf)
IS 5941 (txt)
1970Dental Engine, Electric
IS 5965 (pdf)1970Frame, Rubber Dam, Dental
IS 6020 (pdf)
IS 6020 (txt)
2003Dental Hand Instruments - Reusable Mirrors and HandlesISO 9873
IS 6035 (pdf)
IS 6035 (txt)
1986Zinc Phosphate Dental Cement
IS 6036 (pdf)
IS 6036 (txt)
1987Alginate Dental Impression Materials
IS 6037 (pdf)
IS 6037 (txt)
1970Zinc Oxide-eugenol Dental Impression Paste
IS 6038 (pdf)
IS 6038 (txt)
1979Dental Impression (Modelling) Compound
IS 6039 (pdf)
IS 6039 (txt)
1970Zinc Oxide-eugenol Dental Cement
IS 6043 (pdf)
IS 6043 (txt)
1970Copper Phosphate - Zinc Phosphate Dental Cement
IS 6116 (pdf)
IS 6116 (txt)
1992Dental equipment - Dental patient chairISO 6875
IS 6292 (pdf)1986Cotton Wool Holder, Dental
IS 6402 (pdf)1986Forceps, Rubber Dam Clamp and Cotton Roll Clamp, Dental
IS 6404 (pdf)1971Tweezers, Dental, No. 1, 2 and 3
IS 6462 (pdf)1972Fitting Dimensions for Dental Burs and Cutters
IS 6525 (pdf)1972Syringe, Hypodermic, Dental for Interchangeable Needles
IS 6555 (pdf)1972Dental Laboratory Plaster
IS 6556 (pdf)
IS 6556 (txt)
1972Specification for Dental Impression Plaster
IS 6811 (pdf)1972Syringe, Water, Self-filling, Dental
IS 6814 (pdf)1972Syringe, Air and Water, Dental
IS 6815 (pdf)1972Retainers, Matrix, Dental, No. 1 and 2
IS 6822 (pdf)1972Cutter, Distal Arch Wire, Dental
IS 6823 (pdf)1972Forceps, Extraction, Dental, Lower Molars
IS 6824 (pdf)1972Forceps, Extraction, Dental, Lower Wisdom Tooth
IS 6825 (pdf)1972Forceps, Extraction, Dental, Upper Cuspids and Bicuspids
IS 6826 (pdf)1972Forceps, extraction, dental, lower incisors, cuspids and bicuspids, left
IS 6827 (pdf)1972Forceps, Extraction, Dental, Upper Molars, Left
IS 6828 (pdf)1972Forceps, Extraction, Dental, Upper Molars, Right
IS 6829 (pdf)1991Dental Instruments - Orthodontic Pliers, Angle Wire Bending - Shape, Dimensions and Tests
IS 6846 (pdf)1972General requirements for control unit for airturbine, dental
IS 6856 (pdf)1972Forceps, Extraction, Dental, Upper Root, Narrow Beak
IS 6857 (pdf)1972Specification for Separator, Double-Bow, Dental
IS 6858 (pdf)1972Forceps, Extraction, Dental, Lower Incisors, Cuspids and Bicuspids
IS 6859 (pdf)1972Forceps Extraction, Dental, Upper Root, Wide Beak
IS 6866 (pdf)1986Forceps, Extraction, Dental, Upper Wisdom Tooth
IS 6867 (pdf)1972Forceps, Extraction, Dental, Upper Root, Medium Beak
IS 6868 (pdf)
IS 6868 (txt)
1991Dental instruments - Dental extraction forceps
IS 6870 (pdf)1986Pliers, Loop Bending, Dental
IS 6887 (pdf)
IS 6887 (txt)
2005Dentistry - Denture Base PolymersISO 1567
IS 6888 (pdf)
IS 6888 (txt)
1986Dental Inlay Casting Wax
IS 7066 (pdf)1973Trays, Instrument-cabinet, Dental
IS 7139 (pdf)1991Orthodontic Pliers, Arrow Headed, Clasp Forming - Shape, Dimensions and Tests
IS 7141 (pdf)1991Dental Instruments - Orthodontic Pliers, Band Forming, Peak's Pattern - Shapes, Dimensions and Tests
IS 7333 (pdf)1991Orthodontic pliers, spring forming - Shape and dimensions
IS 7334 (pdf)1988Pliers, Clasp Adjusting, Dental
IS 7335 (pdf)1974Pliers, Closing Loop, Nance Type, Dental
IS 7336 (pdf)1974Specification for Pliers, Tie Back, Nance Type, Dental
IS 7338 (pdf)1991Orthodontic pliers, band removing, posterior - Shape and dimensions
IS 7339 (pdf)1988Specification for Pliers, Anterior Band Removing, Dental
IS 7340 (pdf)1974Pliers, pin and ligature cutting, dental
IS 7348-1 (pdf)
IS 7348-1 (txt)
2003Dental vocabulary: Part 1-General and clinical termsISO 1942-1
IS 7348-2 (pdf)
IS 7348-2 (txt)
2003Dental Vocabulary : Part 2 - Dental MaterialsISO 1942-2
IS 7348-3 (pdf)
IS 7348-3 (txt)
2003Dental Vocabulary, Part 3: Dental InstrumentsISO 1942-3
IS 7348-4 (pdf)
IS 7348-4 (txt)
1994Dental vocabulary, Part 4: Dental equipmentISO 1942-4
IS 7348-5 (pdf)
IS 7348-5 (txt)
1994Dental vocabulary, Part 5: Terms associated with testingISO 1942-5
IS 7425 (pdf)
IS 7425 (txt)
1974Dental Casting Investment for Gold Alloys
IS 7467 (pdf)1974Bands, Matrix, Dental, No. 1 and 2
IS 7474 (pdf)1986Pliers, Collar, Dental
IS 7476 (pdf)1974Nippers, Cutting, Dental
IS 7676 (pdf)1975Chisel, Osseous, Dental
IS 7677 (pdf)1986Exolevers, Apical, Dental
IS 7780 (pdf)1975Pliers, Ligature Forming, Dental
IS 7781 (pdf)1975Pliers, Angle Ribbon Arch with Groove, Dental
IS 7833 (pdf)1975Knives, Gingivectomy, Dental
IS 7853 (pdf)1975Surveyor, Cast, Dental
IS 7966 (pdf)
IS 7966 (txt)
1976Dental Modelling Wax
IS 8019 (pdf)
IS 8019 (txt)
1976Dental Artificial Stone
IS 8020 (pdf)
IS 8020 (txt)
1976Baseplate, Dental
IS 8021 (pdf)
IS 8021 (txt)
1975Dental Sticky Wax
IS 8022 (pdf)
IS 8022 (txt)
1976Acrylic Resin Teeth
IS 8044 (pdf)1976Forceps, extraction, dental, lower molar, children
IS 8045 (pdf)1976Forceps, Extraction, Dental, Lower Incisors and Canines, Children
IS 8046 (pdf)1976Forceps, Extraction, Dental, Upper Incisors and Canines, Children
IS 8047 (pdf)1976Forceps, Extraction, Dental, Upper Molar, Children
IS 8207 (pdf)1976Forceps, Rongeur, Dental
IS 8283 (pdf)1976Tweezers, Soldering
IS 8284 (pdf)1976Pusher, Band, Dental, Mershon's Pattern
IS 8287 (pdf)1986Pliers, Band Stretching and Contouring, Parrot Beak, Dental
IS 8346 (pdf)
IS 8346 (txt)
2003Dental Operator's StoolISO 7493
IS 8527 (pdf)1977Tweezers, Extraction, Dental
IS 8528 (pdf)1988Pliers, Anterior Band Forming, Double Beak, Dental
IS 8529 (pdf)1989Dental Instruments - Pliers, Posterior Band Forming, Double Beak
IS 8571 (pdf)
IS 8571 (txt)
1977Dental Porcelain
IS 8815 (pdf)1993Dentistry - Designation Teeth and Areas of the System for Oral CavityISO 3950
IS 8850 (pdf)
IS 8850 (txt)
1978Guide for the use of dental materials
IS 8864 (pdf)
IS 8864 (txt)
1978Autopolymerizing (acrylic) resins for dental use
IS 8948 (pdf)1989Dental Instruments - Pliers, Ligature Tying
IS 8949 (pdf)1989Dental Instruments - Pliers, Curved, Howe's Pattern
IS 9003 (pdf)
IS 9003 (txt)
1978Acrylizer (curing unit)
IS 9699 (pdf)1981Chisel, Dental, Large
IS 9717 (pdf)1980Trays, Impression, Dental
IS 9774 (pdf)1981Pliers, Bracket Opening, Dental
IS 9932 (pdf)1981Recommendations for Lighting of Dental Operatories
IS 9940 (pdf)1981Trimmers, Electrically Operated, for Dental Models
IS 10011 (pdf)
IS 10011 (txt)
1981Resin-based Dental Filling MaterialsISO 4049
IS 10012 (pdf)
IS 10012 (txt)
1981Dental Zinc Oxide/Eugenol Filling Materials
IS 10088 (pdf)1981Retractor, Dental
IS 10307 (pdf)1989Dental instruments - Working parts of burs and cutters, dental - Nominal sizes and designationISO 2157
IS 10309 (pdf)1982Key, Torquing, Edgewise
IS 10353 (pdf)1982Pliers, McKellops' Type, Dental
IS 10354 (pdf)1982Torch, Alcohol, Dental
IS 10663 (pdf)
IS 10663 (txt)
2003Dental Rotary Instruments - Steel and Carbide BursISO 3823-1
IS 10664 (pdf)
IS 10664 (txt)
2003Dental Rotary Instruments - Steel and Carbide Finishing BursISO 3823-2
IS 10798 (pdf)1984Indentification system for items of dental equipment at the working placeISO 4073
IS 10828 (pdf)1984Pliers, Band Contouring, Dental Johnson's Pattern
IS 10836-1 (pdf)1984Pliers, Loop Bending, Dental, Tweed's Pattern, Part 1: Fixed Beak, Type 1
IS 10866 (pdf)1984Abrasives Dental
IS 11044 (pdf)1984Acrylic Trimmers, Dental
IS 11045 (pdf)1984Metal Trimmers, Dental
IS 11317 (pdf)1985Shears, Laboratory, Straight, Dental
IS 11394 (pdf)1985Pliers, Distal End Cutting, with Safety Hold, Dental
IS 11628 (pdf)
IS 11628 (txt)
1986Agar Impression Material
IS 11929 (pdf)1986Adopters, Band, Dental
IS 12181 (pdf)1987Determination of colour stability of dental polymeric materialsISO 7491
IS 12374 (pdf)1987Dimensions for swivel type coupling to dental handpiecesISO 3964
IS 12507 (pdf)1988General requirements for Dental Pliers
IS 12601 (pdf)1989Dental Instruments - Pliers, Lip-safe, Flat Nose
IS 12602 (pdf)1989Dental Instruments - Nippers, Cutting, Carbide Tip
IS 12624 (pdf)
IS 12624 (txt)
2005Dental Root-Canal Obturating PointsISO 6877
IS 12721-1 (pdf)
IS 12721-1 (txt)
2005Dental Base Metal Casting Alloys, Part 1: Cobalt-Based AlloysISO 6871-1
IS 12721-2 (pdf)
IS 12721-2 (txt)
2005Dental Base Metal Casting Alloys, Part 2: Nickel - Based AlloysISO 6871-2
IS 12764 (pdf)2009Dental Handpieces - Hose ConnectorsISO 9168
IS 12797 (pdf)
IS 12797 (txt)
1989Dental Materials - Dental Glass Polyalkenoate Cements
IS 12855 (pdf)
IS 12855 (txt)
1989Dental Materials - Root Canal Sealing MaterialsISO 6876
IS 13701 (pdf)
IS 13701 (txt)
1993Dentistry - Dental Rotary Instruments - Test methodsISO 8325
IS 13710 (pdf)
IS 13710 (txt)
1993Dental materials - Dental zinc polycarboxylate cements
IS 15311-1 (pdf)2003Dental Rotary Instruments - Shanks, Part 1: Shanks Made of MetalsISO 1797-1
IS 15311-2 (pdf)
IS 15311-2 (txt)
2003Dental Rotary Instruments - Shanks, Part 2: Shanks Made of PlasticsISO 1797-1
IS/ISO 1563 (pdf)1990Dental Alginate Impression MaterialISO 1563
IS/ISO 2157 (pdf)1992Dental Rotary Instruments - Nominal Diameters and Designation Code NumberISO 2157 ; 1992
IS/ISO 6873 (pdf)
IS/ISO 6873 (txt)
1998Dental Gypsum ProductsISO 6873:1998
IS/ISO 6876 (pdf)
IS/ISO 6876 (txt)
2001Dental Root Canal Sealing MaterialsISO 6876:2001
IS/ISO 7492 (pdf)
IS/ISO 7492 (txt)
1997Dental explorersISO 7492:1997
IS/ISO 9917-1 (pdf)
IS/ISO 9917-1 (txt)
2003Dentistry - Water-based cement, Part 1: Powder/liquid acid-base cementsISO 9917-1:2003
IS/ISO 9917-2 (pdf)
IS/ISO 9917-2 (txt)
1998Dental - Water-based cements, Part 2: Light-activated cementsISO 9917-2:1998
IS/ISO 24234 (pdf)
IS/ISO 24234 (txt)
2004Dentistry - Mercury and Alloys for Dental AmalgamISO 24234:2004

Last Updated: September 6, 2013