Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.
Division Name: Medical Equipment and Hospital Planning
Section Name: Orthopaedic Instruments, Implants and Accessories (MHD 2)
| Standard | Year | Title | IBR |
|---|---|---|---|
| IS 5089 (pdf) | 1969 | Blade Plate, Blount Type | |
| IS 5090 (pdf) | 1969 | Blade Plate, Moore Type | |
| IS 5170 (pdf) | 1969 | Bone Plate, Sherman Type | |
| IS 5171 (pdf) | 1969 | Bone plate, kessel, osteotomy | |
| IS 5347-1 (pdf) | 1986 | Requirements for Orthopedic Implants, Part 1: General Requirements | |
| IS 5347-2 (pdf) IS 5347-2 (txt) | 1993 | Requirements for orthopaedic Implants, Part 2: Wrought stainless steel | ISO 5832-1 |
| IS 5347-3 (pdf) IS 5347-3 (txt) | 1996 | Requirements for orthopaedic implants, Part 3: Unalloyed titanium | ISO 5832/2-1993 |
| IS 5347-4 (pdf) IS 5347-4 (txt) | 1996 | Requirements for orthopaedic implants, Part 4: Wrought titanium 6-aluminium 4- vanadium alloy | ISO 5832/3-1990 |
| IS 5347-5 (pdf) | 2000 | Requirements for Orthopaedic Implants, Part 5: Cobalt-chromium-molybdenum Casting Alloy | ISO 5832/4-1996 |
| IS 5347-6 (pdf) IS 5347-6 (txt) | 1996 | Requirements for orthopaedic implants, Part 6: Wrought-cobalt-chromium tungsten-nickel alloy | ISO 5832/5-1993 |
| IS 5347-7 (pdf) IS 5347-7 (txt) | 2002 | Requirements for Orthopaedic Implants, Part 7: Wrought Cobalt-Nickel-Chromium-Molybdenum Alloy | ISO 5832-6 |
| IS 5347-8 (pdf) IS 5347-8 (txt) | 1997 | Requirements for orthopaedic implants, Part 8: Forgeable and cold-formed-cobalt-chromium-nickel-molybdenum-iron alloy | ISO 5832/7-1994 |
| IS 5347-9 (pdf) IS 5347-9 (txt) | 1998 | Requirements for Orthopaedic Implants, Part 9: Ceramic Materials Based on High Purity Alumina | ISO 6474-1994 |
| IS 5347-10 (pdf) IS 5347-10 (txt) | 1987 | Requirements for Orthopaedic Implants, Part 10: Ultra-High Molecular Weight Polyethylene, Powder Form | ISO 5834/1-1985 |
| IS 5347-11 (pdf) | 1987 | Requirements for Orthopaedic Implants, Part 11: Ultra-high Molecular Weight Polyethylene, Moulded Form | ISO 5834/2-1985 |
| IS 5347-12 (pdf) | 1993 | Requirements for orthopaedic implants, Part 12: Wrought cobalt-nickel-chromium molybdenum tungsten iron alloy | ISO 5832-8 |
| IS 5347-13 (pdf) IS 5347-13 (txt) | 1997 | Requirements for orthopaedic implants, Part 13: Wrought high nitrogen stainless steel | ISO 5832-9 |
| IS 5347-14 (pdf) IS 5347-14 (txt) | 1997 | Requirements for orthopaedic implants, Part 14: Wrought titanium 5-aluminium 2,5-iron alloy | ISO 5832-10 |
| IS 5347-15 (pdf) IS 5347-15 (txt) | 1997 | Requirements for orthopaedic implants, Part 15: Wrought titanium 6-aluminium 7-niobium alloy | ISO 5832-11 |
| IS 5347-16 (pdf) IS 5347-16 (txt) | 2002 | Requirements for Orthopaedic Implants, Part 16: Poly (L-Lactide) Resins and Fabricated Forms for Surgical Implants - In Vitro Degradation Testing | ISO 13781 |
| IS 5347-17 (pdf) IS 5347-17 (txt) | 2002 | Requirements for Orthopaedic Implants, Part 17: Metallic Materials - Unalloyed Tantalum for Surgical Implant Applications | ISO 13782 |
| IS 5347-18 (pdf) IS 5347-18 (txt) | 2002 | Requirements for Orthopaedic Implants, Part 18: Ceramic Materials Based on Yttria-Stabilized Tetragonal Zirconia (Y-TZP) | ISO 13356 |
| IS 5392 (pdf) | 1969 | Bone Plates, Eggers Type | |
| IS 5393 (pdf) | 1969 | Screws, Bone | |
| IS 5394 (pdf) | 1969 | Prostheses, Hip | |
| IS 5395-1 (pdf) | 1989 | Surgical Implants - Intramedullary Nailing Systems for Bone Surgery, Part 1: Intramedullary Nails with Cloverleaf or V-Shaped Cross-Section | ISO 5837/1-1985 |
| IS 5396 (pdf) | 1969 | Guide Pin for Kuntscher Nail | |
| IS 5397 (pdf) | 1969 | Reamer, Flexible for Kuntscher Nail (medullary canal) | |
| IS 5574 (pdf) | 1970 | Forceps, Wire Cutting, Compound Action, Orthopaedic | |
| IS 5580 (pdf) | 1970 | Chisels, Stille Pattern, Orthopaedic | |
| IS 5581 (pdf) | 1970 | Stirrup, Bohler's | |
| IS 5583 (pdf) | 1970 | Osteotomes, Stille Pattern, Orthopedic | |
| IS 5585 (pdf) | 1970 | Mallet, Rubber-capped | |
| IS 5589 (pdf) | 1970 | Saw Handle, Bone Amputation, Orthopaedic | |
| IS 5590 (pdf) | 1970 | Saw Blade, Bone Amputation | |
| IS 5601 (pdf) | 1970 | Gouges, Stille Pattern, Orthopedic | |
| IS 5803 (pdf) | 1970 | Twist Drill Used in Orthopaedic Surgery | |
| IS 5846 (pdf) | 1970 | Nails, Bone (Smith Petersen and Watson Jones Patterns) | |
| IS 5847 (pdf) | 1970 | Pin Chuck for Introducing Steinman Pins | |
| IS 5848 (pdf) | 1996 | Implants for Surgery - Skeletal Pins and Wires - Steinmann Skeletal Pins - Dimensions | ISO 5838-2 |
| IS 6187 (pdf) | 1971 | Saw, Wire (Gigli pattern) | |
| IS 6233 (pdf) | 1971 | Forceps, Bone Cutting (stille liston pattern) | |
| IS 6252 (pdf) | 1971 | Scissors Bandage, Lister's Pattern | |
| IS 6281 (pdf) | 1971 | Awl, Bone | |
| IS 6289 (pdf) | 1971 | Staple, Epiphyseal, Orthopedic | |
| IS 6319 (pdf) | 1971 | Clamp, Bone, Lowman Type | |
| IS 6371 (pdf) | 1971 | Forceps, Bone Holding, Lane's, Lane-fagge's and Fergusson's Patterns | |
| IS 6484 (pdf) | 1972 | Forceps, Gouge, Orthopaedic Fergusson's Pattern | |
| IS 6485 (pdf) | 1972 | Forceps, Gouge, Angular, Orthopaedic | |
| IS 6486 (pdf) | 1972 | Forceps, Gouge, Orthopaedic Lane's Pattern | |
| IS 6501 (pdf) | 1972 | Forceps, Gouge, Orthopaedic, Stille Luer's Pattern | |
| IS 6785 (pdf) | 1982 | Plate, Bone, Wainwright, Osteotomy | |
| IS 6787 (pdf) | 1973 | Plate, Bone, McLaughlin | |
| IS 6790 (pdf) | 1973 | Plate, Bone, Intertrochanteric, Thornton Type | |
| IS 6801-1 (pdf) IS 6801-1 (txt) | 1999 | Orthopaedic Instruments - Drive Connections, Part 1: Keys for Use with Screws with Hexagon Socket Heads | ISO 8319-1 |
| IS 6801-2 (pdf) IS 6801-2 (txt) | 1987 | Drive Connections for Orthopaedic Instruments, Part 2: Screw Drivers for Single Slot Head Screws, Screws with Cruciate Slot and Cross-recessed Head Screws | ISO 8319/2-1986 |
| IS 6975 (pdf) | 1973 | Reamer, Trochanteric, Orthopedic | |
| IS 6976 (pdf) | 1973 | Awl, Kuntscher, Diamond Pointed | |
| IS 6982 (pdf) | 1973 | Gauge for Intramedullary Nails | |
| IS 7055 (pdf) | 1973 | Drivers, Kuntscher, Nail, Orthopaedic | |
| IS 7102 (pdf) | 1973 | Screw, Bone, Leinbach, Medullary | |
| IS 7105-1 (pdf) | 1973 | Extractor for Kuntscher Nail, Part 1: Handle type | |
| IS 7105-2 (pdf) | 1986 | Extractor for Kuntscher Nail, Part 2: Striker Type | |
| IS 7106 (pdf) | 1973 | Extractor, Staple, Orthopaedic | |
| IS 7107 (pdf) | 1973 | Punch, Staple, Orthopaedic | |
| IS 7108 (pdf) | 1973 | Hammer for Kuntscher Nail Extractor | |
| IS 7109 (pdf) | 1973 | Starter, Staple, Orthopaedic | |
| IS 7110 (pdf) | 1984 | Pins, Rush, Intramedullary | ISO 5837-2 |
| IS 7111 (pdf) | 1973 | Inserter, Staple, Orthopaedic | |
| IS 7398 (pdf) | 1974 | Forceps, Bone Holding, Farabeuf's Pattern | |
| IS 7435 (pdf) | 1974 | Rongeur, Ruskin's Pattern | |
| IS 7442 (pdf) | 1974 | Forceps, Bone Cutting, Straight and Angular, Liston's Pattern | |
| IS 7629 (pdf) | 1975 | Bender, Plate, Orthopedic | |
| IS 7650 (pdf) | 1975 | Drill, Hand, Bone, Universal, Micro and Kirschner | |
| IS 7701 (pdf) | 1975 | Plates, Bone, Spinal, Meurig Williams | |
| IS 7817 (pdf) | 1975 | Impactor for Hip Prosthesis | |
| IS 7818 (pdf) | 1975 | Broach, Moore Type, for Hip Prosthesis | |
| IS 7819 (pdf) | 1975 | Mallet, Nylon Headed, Orthopedic | |
| IS 7841 (pdf) | 1975 | Compression Plate, Muller Type | |
| IS 7846 (pdf) | 1975 | Extractor for Hip Prosthesis | |
| IS 8261-1 (pdf) | 1976 | Pins and Wires, Skeletal, Traction, Part I: Kirschner Wires | |
| IS 8261-2 (pdf) | 1976 | Pins and Wires, Skeletal, Traction, Part II: Guide Wires | |
| IS 8261-3 (pdf) | 1976 | Pins and Wires, Skeletal, Traction, Part III: Pins and Wires, Fixation and Threaded | |
| IS 8261-4 (pdf) IS 8261-4 (txt) | 1998 | Pins and wires skeletal traction, Part 4: Material and mechanical requirements | ISO 5838-1 |
| IS 8326 (pdf) | 1977 | Starter, Smith Peterson Nail, Orthopedic | |
| IS 8332 (pdf) | 1977 | Handle, Saw, Gigli | |
| IS 8608 (pdf) | 1977 | Countersinks, Pilot Type, for Orthopedic Use | |
| IS 8609 (pdf) | 1977 | Nail, Hip, Jewett Type, for Orthopedic Use | |
| IS 8641 (pdf) IS 8641 (txt) | 1997 | Implants for Surgery - Acrylic Resin Cements | ISO 5833 |
| IS 8755 (pdf) | 1977 | Method for Testing for Biological Compatibility of Metals for Surgical Implants | |
| IS 8921 (pdf) | 1978 | Augar-extractor, Judet's Pattern | |
| IS 8922 (pdf) | 1978 | Depth Gauge for Orthopedic Use | |
| IS 8926 (pdf) | 1978 | Bone Skid, Murphy Lane's Pattern | |
| IS 9265 (pdf) | 1979 | Clamp, Compression, Muller's Pattern | |
| IS 9829-1 (pdf) IS 9829-1 (txt) | 1996 | Implants for surgery - Metal bone screws, Part 1: With hexagonal drive connection spherical under surface of head, asymmetrical thread - Dimensions | ISO 5835 |
| IS 9829-2 (pdf) IS 9829-2 (txt) | 1996 | Implants for surgery - Metal bone screws, Part 2: With conical under-surface head - Dimensions | ISO 9268 |
| IS 9829-3 (pdf) | 1986 | Metal bone screws, Part 3: Screws with symmetrical thread, conical under surfaces | |
| IS 9829-4 (pdf) | 1986 | Metal bone screws, Part 4: Screws with asymmetrical thread, conical under surfaces | |
| IS 10121-1 (pdf) | 1982 | Metal Bone Screws - Mechanical Requirements and Methods of Test, Part 1: Screws with Asymmetrical Thread, Variable Fitting (spherical), Stainless Steel | |
| IS 10121-2 (pdf) | 1982 | Metal Bone Screws - Mechanical Requirements and Methods of Test, Part II: Screws with Asymmetrical Thread, Constant Fitting (spherical), Stainless Steel | |
| IS 10128 (pdf) | 1982 | Pin, Knowles | |
| IS 10154 (pdf) | 1982 | Blade Plate, Osteotomy, Wainwright-hammond's Pattern | |
| IS 10155 (pdf) | 1982 | Blade Plate, Femoral, Lower | |
| IS 10159 (pdf) | 1982 | Nail, Supracondylar, Jewett's Pattern | |
| IS 10235-1 (pdf) IS 10235-1 (txt) | 1982 | Glossary of Terms, Part I: General Medical Terms for Surgical Implants | |
| IS 10235-2 (pdf) IS 10235-2 (txt) | 1982 | Glossary of terms in orthopaedics, Part 2: Mechanics and materials for implants | |
| IS 10235-3 (pdf) IS 10235-3 (txt) | 1982 | Glossary of terms in orthopaedics, Part 3: Orthopaedic surgery | |
| IS 10326 (pdf) | 1982 | Spreader, Plaster Cast, Henning's Pattern | |
| IS 10327 (pdf) | 1982 | Bender, Plaster, Bohler's Pattern | |
| IS 10338 (pdf) | 1982 | saw, plaster, hand | |
| IS 10349 (pdf) | 1982 | Rasp for Hip Prothesis, Thompson's and Moore's Patterns | |
| IS 10727 (pdf) | 1983 | Nail, Square, Ulna | |
| IS 10728 (pdf) | 1983 | Nail, Square, Radius | |
| IS 10729 (pdf) | 1983 | Nail Set, Kuntscher | |
| IS 10730 (pdf) | 1983 | Osteotome, Whitchurch Howell's Pattern | |
| IS 11034 (pdf) IS 11034 (txt) | 1993 | Implants for surgery - Guidance on care and handling of orthopaedic implants | ISO 8828 |
| IS 11088 (pdf) IS 11088 (txt) | 1984 | Guide for retrieval and analysis of metallic orthopaedic implants | |
| IS 11567-1 (pdf) | 1986 | Holes and Slots for Metal Bone Plates, Part 1: Corresponding to Screws with Asymmetrical Thread and Spherical Under-Surfaces | |
| IS 11567-3 (pdf) | 1986 | Holes and Slots in Metal Bone Plates, Part 3: Corresponding to Screws with Asymmetrical Thread and Conical Under-Surfaces | |
| IS 11567-4 (pdf) | 1986 | Holes and Slots in Metal Bone Plates, Part 4: Corresponding to Screws with Symmetrical Thread and Conical Undersurfaces | |
| IS 11568 (pdf) | 1986 | Forceps, Bone Holding, Semb's Pattern | |
| IS 11953 (pdf) | 1986 | Driver and Bender for Rush Intramedullary Pin | |
| IS 12088 (pdf) | 1987 | Bone Plate, Dynamic Compression | |
| IS 12165 (pdf) IS 12165 (txt) | 1987 | Basic Requirements for Orthopedic Joint Prostheses | ISO 5839 |
| IS 12375-1 (pdf) IS 12375-1 (txt) | 2000 | Implants for Surgery - Partial and Total Hip Joint Prostheses, Part 1: Classification and Designation of Dimensions | ISO 7206-1 |
| IS 12375-2 (pdf) IS 12375-2 (txt) | 1993 | Implants for Surgery - Partial and Total Hip Joint Prostheses, Part 2: Bearing Surfaces Made of Metallic and Plastic Materials | ISO 7206-2 |
| IS 12375-3 (pdf) IS 12375-3 (txt) | 1993 | Implants for Surgery - Partial and Total Hip Joint Prostheses, Part 3: Determination of endurance properties of stemmed femorel components without application of torsion | ISO 7206-3 |
| IS 12375-4 (pdf) IS 12375-4 (txt) | 1993 | Implants for Surgery - Partial and Total Hip Joint Prostheses, Part 4: Determination of Endurance Properties of Stemmed Femoral Components with Application of Torsion | ISO 7206-4 |
| IS 12375-5 (pdf) IS 12375-5 (txt) | 1998 | Implants for Surgery - Partial and Total Hip Joint Prostheses, Part 5: Determination of Resistance to Static Load of Head and Neck Region of Stemmed Femoral Components | ISO 7206-5 |
| IS 12375-6 (pdf) IS 12375-6 (txt) | 1998 | Implants for Surgery - Partial and Total Hip Joint Prostheses, Part 6: Determination of Endurance Properties of Head and Neck Region of Stemmed Femoral Components | ISO 7206-6 |
| IS 12375-7 (pdf) | 1998 | Implants for Surgery - Partial and Total Hip Joint Prostheses, Part 7: Endurance Performance of Stemmed Femoral Components without Application of Torsion | ISO 7206-7 |
| IS 12375-8 (pdf) | 1998 | Implants for Surgery - Partial and Total Hip Joint Prostheses, Part 8: Endurance Performance of Stemmed Femoral Components with Application of torsion | ISO 7206-8 |
| IS 12375-9 (pdf) IS 12375-9 (txt) | 1998 | Implants for surgery - Partial and total hip joint prostheses, Part 9: Determination of resistance to torque of head fixation of stemmed femoral components | ISO 7206-9 |
| IS 12376-1 (pdf) IS 12376-1 (txt) | 1997 | Implants for surgery - Femoral tibial components for partial and total knee joint prostheses, Part 1: Classifcation, definitions and designation of dimensions | ISO 7207-1 |
| IS 13423 (pdf) IS 13423 (txt) | 1992 | Good Manufacturing Practices for Orthopaedic Implants - Guide | |
| IS 14227 (pdf) IS 14227 (txt) | 1995 | Implants for surgery - Fixation devices for use in the ends of the femur in adults | ISO 8615 |
| IS 14228 (pdf) IS 14228 (txt) | 1996 | Implants for Surgery-staples with Parallel Legs for Orthopedic Use - General Requirements | ISO 8827 |
| IS 14229 (pdf) IS 14229 (txt) | 1995 | Implants for surgery - Determination of bending strength and stiffness of bone plates | ISO 9585 |
| IS 14239 (pdf) | 1995 | Orthopaedic Drilling Instruments - Drill Bits, Taps and Countersink Cutters | ISO 9714-1 |
| IS 14240 (pdf) IS 14240 (txt) | 1995 | Orthopaedic implants - General requirements for marking packaging and labelling |
Last Updated: September 6, 2013
↑