Divisional Index ↑

Public Safety Standards of the Republic of India

Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.

Division Name: Mechanical Engineering
Section Name: Gaskets and Packing (MED 30)

StandardYearTitleIBR
IS 2712 (pdf)
IS 2712 (txt)
1998Gaskets and packings - compressed asbestos fibre jointing
IS 4253-1 (pdf)
IS 4253-1 (txt)
2008Cork Composition Sheets, Part 1: Plain Cork Sheets
IS 4253-2 (pdf)
IS 4253-2 (txt)
2008Cork composition sheets, Part 2: Cork and Rubber
IS 4687 (pdf)
IS 4687 (txt)
1995Gaskets and Packings - Gland Packings Asbestos
IS 4688 (pdf)
IS 4688 (txt)
1968Specification for Proofed Cotton Duck Gland Packing
IS 5129-2 (pdf)
IS 5129-2 (txt)
2003Rotary Shaft Radial Lip Type Seal, Part 2: VocabularyISO 6194-2
IS 5129-3 (pdf)
IS 5129-3 (txt)
2000Rotary Shaft Lip Type Seals, Part 3: Storage, Handling and InstallationISO 6194-3
IS 5129-4 (pdf)
IS 5129-4 (txt)
2006Rotary Shaft Lip Type Seals, Part 4: Performance Test ProceduresISO 6194-4
IS 5129-5 (pdf)
IS 5129-5 (txt)
2000Rotary Shaft Lip Type Seals, Part 5: Identification of Visual ImperfectionsISO 6194-5
IS 5414 (pdf)
IS 5414 (txt)
1995Gaskets and Packings - Gland Packing Jute and Hemp
IS 5566 (pdf)
IS 5566 (txt)
1970Specification for Vegetable Fibre Base Jointing Material
IS 5569 (pdf)
IS 5569 (txt)
1970Specification for Cork and Cellulose Base Jointing Material
IS 6210 (pdf)
IS 6210 (txt)
1979Method of test for stress relaxation of gasket materials (to be withdrawn)
IS 7714 (pdf)1975Method of seability test for gasket material
IS 7719 (pdf)1975Metallic spiral wound gaskets
IS 7719 (pdf)2013Metallic Spiral Wound Gaskets - Specification
IS 9066 (pdf)
IS 9066 (txt)
1979lubricated cotton gland packings
IS 9975-1 (pdf)1981Specification for 'O' Rings, Part I: Dimensions
IS 9975-2 (pdf)1984Specification for 'O' Rings, Part 2: Material Selection and Quality Acceptance Criteria
IS 9975-3 (pdf)1984Specification for 'O' Rings, Part 3: Seal Housing Dimensions, Tolerances and Design Criteria for Standard Applications
IS 9975-4 (pdf)1984Specification for 'O' Rings, Part 4: Terminology and definition of terms
IS 10008 (pdf)1992Beater addition jointings - Specification
IS 10330 (pdf)
IS 10330 (txt)
1982Specification for Formed Asbestos Packing Rings for High Pressure and High-temperature Valves
IS 10864 (pdf)1984Recommendation for heat exchanger gasket
IS 11149 (pdf)
IS 11149 (txt)
1984Rubber Gaskets
IS 13257 (pdf)
IS 13257 (txt)
1992Ring type joint gasket and grooves for pipe flanges
IS 14538-1 (pdf)1998Gaskets and Packings, Part 1: Composition Cork
IS 14538-2 (pdf)
IS 14538-2 (txt)
1998Gaskets and Packings, Part 2: Composition Cork - Test methods
IS 14539 (pdf)
IS 14539 (txt)
1998Insulation mill board
IS 15430 (pdf)
IS 15430 (txt)
2003Rubber Seals - Joint Rings Used for Gas Supply Pipes and Fittings - MaterialISO 6447
IS 15545-1 (pdf)
IS 15545-1 (txt)
2004Rorary shaft lip type seals incorporating thermoplastic sealing elements, Part 1: Nominal dimensions and tolerances
IS 15545-2 (pdf)
IS 15545-2 (txt)
2004Rorary shaft lip type seals incorporating thermoplastic sealing elements, Part 2: Vocabulary
IS 15545-3 (pdf)
IS 15545-3 (txt)
2004Rorary shaft lip type seals incorporating thermoplastic sealing elements, Part 3: Storage handling and installation
IS 15545-4 (pdf)
IS 15545-4 (txt)
2004Rorary shaft lip type seals incorporating thermoplastic sealing elements, Part 4: Performance test procedeures
IS 15545-5 (pdf)
IS 15545-5 (txt)
2004Rorary shaft lip type seals incorporating thermoplastic sealing elements, Part 5: Identification of visual imperfections
IS/ISO 6194-1 (pdf)
IS/ISO 6194-1 (txt)
2007Rotary shaft lip-type seals incorporating elastomeric sealing elements, Part 1: Nominal dimensions and tolerancesISO 6194-1:2007

Last Updated: September 6, 2013