Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.
Division Name: Mechanical Engineering
Section Name: Mechanical Vibration and Shock (MED 28)
| Standard | Year | Title | IBR |
|---|---|---|---|
| IS 11717 (pdf) IS 11717 (txt) | 2000 | Vocabulary on Vibration and Shock | ISO 2041 |
| IS 11726 (pdf) IS 11726 (txt) | 1985 | Requirements for instruments for measuring vibration severity of rotating and reciprocating machines | ISO 2954 |
| IS 13276-1 (pdf) IS 13276-1 (txt) | 2000 | Mechanical Vibration and Shock - Evaluation of Human Exposure to Whole Body Vibration, Part 1: General Requirements | ISO 2631-1 |
| IS 13276-3 (pdf) IS 13276-3 (txt) | 1992 | Evaluation of human exposure to whole-body vibration, Part 2: Vibration in building(1Hz to 80 Hz) | ISO 2631-2 |
| IS 13278 (pdf) IS 13278 (txt) | 1999 | Mechanical Vibration - Symbols for Balancing Machines and Associated Instrumentation | ISO 3719 |
| IS 13281 (pdf) IS 13281 (txt) | 1999 | Mechanical Vibration and Shock Affecting Man - Vocabulary | ISO 5805 |
| IS 14280 (pdf) IS 14280 (txt) | 1995 | Mechanical vibration - Balancing - Shaft and fitment key convention | ISO 8821 |
| IS 14731 (pdf) IS 14731 (txt) | 1999 | Auxiliary Tables for Vibration Generators - Methods of Describing Equipment Characteristics | ISO 6070 |
| IS 14732 (pdf) IS 14732 (txt) | 2000 | Guidelines for the Evaluation of the Response of Occupants of Fixed Structures, Especially Buildings and Off-Shore Structures, to Low-Frequency Horizontal Motion (0.063 to 1 Hz) | ISO 6897 |
| IS 14736-1 (pdf) IS 14736-1 (txt) | 1999 | Vibration and Shock - Experimental Determination of Mechanical Mobility, Part 1: Basic Definitions and Transducers | ISO 7626-1 |
| IS 14736-2 (pdf) IS 14736-2 (txt) | 1999 | Vibration and Shock - Experimental Determination of Mechanical Mobility, Part 2: Measurements Using Single-point Translation Excitation with an Attached Vibration Exciter | ISO 7626-2 |
| IS 14773-1 (pdf) IS 14773-1 (txt) | 2000 | Mechanical Vibration of Non-reciprocating Machines - Measurements on Rotating Shafts and Evaluation Criteria, Part 1: General Guidelines | ISO 7919-1 |
| IS 14773-3 (pdf) IS 14773-3 (txt) | 2000 | Mechanical Vibration of Non-Reciprocating Machines - Measurements on Rotating Shafts and Evaluation Criteria, Part 3: Coupled Industrial Machines | ISO 7919-3 |
| IS 14773-4 (pdf) IS 14773-4 (txt) | 2000 | Mechanical Vibration of Non-reciprocating Machines - Measurements on Rotating Shafts and Evaluation Criteria, Part 4: Gas Turbine Sets | ISO 7919-4 |
| IS 14817-3 (pdf) IS 14817-3 (txt) | 2004 | Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts, Part 3: Industrial Machines with Nominal Power Above 15 kW and Nominal Speed Between 120 r/min and 15 000 r/min when measured in situ | ISO 10816-3 |
| IS 14817-4 (pdf) IS 14817-4 (txt) | 2004 | Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts, Part 4: Gas Turbines Driven Sets Excluding Aircraft Derivatives | ISO 10816-4 |
| IS 14817-5 (pdf) IS 14817-5 (txt) | 2004 | Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts, Part 5: Machine Sets in Hydrualic Power Generating/Pumping and Pumping Plants | ISO 10816-5 |
| IS 14817-6 (pdf) IS 14817-6 (txt) | 2004 | Mechanical Vibration - Evaluation of Machine Vibration by Measurements on Non-Rotating Parts, Part 6: Reciprocationg Machinces with Power Rating Above 100 kW | ISO 10816-6 |
| IS 14882 (pdf) IS 14882 (txt) | 2000 | Damping Materials - Graphical Presentation of the Complex Modulus | ISO 10112 |
| IS 14883 (pdf) IS 14883 (txt) | 2000 | Mechanical Vibration and Shock - Mechanical Mounting of Accelerometers | ISO 5348 |
| IS 14884 (pdf) | 2000 | Mechanical Vibration and Shock - Vibration of Buildings - Guidelines for the Measurement of Vibrations and Evaluation of Their Effects on Buildings | ISO 4866 |
| IS 14907 (pdf) IS 14907 (txt) | 2001 | Human/Human Surrogate Impact (Single Shock) Testing and Evaluation - Guidance on Technical Aspects | ISO 10227 |
| IS 14910 (pdf) IS 14910 (txt) | 2001 | Mechanical Vibration and Shock - Human Exposure - Biodynamic Coordinate Systems | ISO 8727 |
| IS 14916 (pdf) IS 14916 (txt) | 2001 | Mechanical Vibration and Shock - Free, Mechanical Impedance of The Human Hand-Arm System at The Driving Point | ISO 10068 |
| IS 14917-1 (pdf) IS 14917-1 (txt) | 2001 | Mechanical Vibration - Laboratory Method for Evaluating Vehicle Seat Vibration, Part 1: Basic Requirements | ISO 10326-1 |
| IS 14979 (pdf) IS 14979 (txt) | 2001 | Mechanical Vibration and Shocks - Disturbance to Human Activity and Performance - Classification | ISO 9996 |
| IS 15591 (pdf) IS 15591 (txt) | 2005 | Machanical Vibration and Shock - Measurement and Evaluation of Shock and Vibration Effects on Sensitive Equipment in Buildings | ISO 8569 |
| IS 15592 (pdf) IS 15592 (txt) | 2005 | Mechanical vibration - Road surfface profiles - Reporting of measured data | ISO 8608 |
| IS 15593-1 (pdf) IS 15593-1 (txt) | 2005 | Mechanical Vibration and Shock - Vibration and Shock in Buildings with Sensitive Equipment, Part 1: Measurement and evaluation | ISO/TS 10811-1 |
| IS 15593-2 (pdf) IS 15593-2 (txt) | 2005 | Mechanical Vibration and Shock - Vibration and Shock in Buildings with Sensitive Equipment, Part 2: Classification | ISO/TS 10811-2 |
| IS 15594 (pdf) IS 15594 (txt) | 2005 | Mechanical Vibration - Measurement of Vibration Generated intervally in Railway Tunnels by Passage of the Trains | ISO 10815 |
| IS/ISO 1925 (pdf) IS/ISO 1925 (txt) | 2001 | Mechanical vibration - Balancing - Vocabulary | ISO 1925:2001 |
| IS/ISO 1940-1 (pdf) IS/ISO 1940-1 (txt) | 2003 | Mechanical vibration - Balance quality requirements for rotors in a constant (Rigid) state, Part 1: Specifications and verfication of balance tolerances | ISO 1940-1:2003 |
| IS/ISO 1940-2 (pdf) IS/ISO 1940-2 (txt) | 1997 | Mechanical Vibration - Balance Quality Requirements of Rigid Rotors | ISO 1940-2:1997 |
| IS/ISO 2017-2 (pdf) IS/ISO 2017-2 (txt) | 2007 | Mechanical Vibration and Shock - Resilient Mounting Systems, Part 2: Technical Information to be Exchanged for the Application of Vibration Isolation Associated with Railway Systems | ISO 2017-2:2007 |
| IS/ISO 2041 (pdf) IS/ISO 2041 (txt) | 2009 | Vocabulary on Mechanical Vibratio, Shock and Condition Monitoring | ISO 2041:2009 |
| IS/ISO 2631-2 (pdf) IS/ISO 2631-2 (txt) | 2003 | Mechanical vibration and shock - Evaluation of human exposure to whole body vibration, Part 2: Vibration in buildings (1 Hz to 80 Hz) | ISO 2631-2:2003 |
| IS/ISO 2953 (pdf) IS/ISO 2953 (txt) | 1999 | Mechanical vibration - Balancing machines - Description and evaluation | ISO 2953:1999 |
| IS/ISO 4866 (pdf) IS/ISO 4866 (txt) | 2010 | Mechanical Vibration and Shock - Vibration of Fixed Structures - Guidelines for the Measurement of Vibrations and Evaluation of Their Effects on Structures | ISO 4866:2010 |
| IS/ISO 5344 (pdf) IS/ISO 5344 (txt) | 2004 | Electrodynamics vibration generating systems - Performance characterstics | ISO 5344:2004 |
| IS/ISO 5349-1 (pdf) IS/ISO 5349-1 (txt) | 2001 | Mechanical Vibration - Measurement and and Evaluation of Human Exposure to Hand Transmitted Vibration, Part 1: General Requirements | ISO 5349-1:2001 |
| IS/ISO 5349-2 (pdf) IS/ISO 5349-2 (txt) | 2001 | Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration, Part 2: Practical guidance for measurement at the workplace | ISO 5349-2:2001 |
| IS/ISO 5349 (pdf) IS/ISO 5349 (txt) | 2001 | Mechanical Vibration - Guidelines for the Measurement and the Assessment of Human Exposure to Hand Transmitted Vibration | ISO 5349:2001 |
| IS/ISO 5982 (pdf) IS/ISO 5982 (txt) | 2001 | Mechanical vibration and shock - Range of idealized values to characterize seated-body biodynamic response under vertical vibration | ISO 5982:2001 |
| IS/ISO 6954 (pdf) IS/ISO 6954 (txt) | 2000 | Mechanical vibration - Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability of passenger and merchant ships | ISO 6954:2000 |
| IS/ISO 7475 (pdf) IS/ISO 7475 (txt) | 2002 | Mechanical vibration - Balancing machines - Englosures and other protective measures for the measuring station | ISO 7475:2002 |
| IS/ISO 7919-2 (pdf) IS/ISO 7919-2 (txt) | 2001 | Mechanical vibration - evaluation of machine vibration by measurements on rotating shafts, Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 R/Min. 3 000 R/Min and 3 600 R/Min | ISO 7919-2:2001 |
| IS/ISO 7919-3 (pdf) IS/ISO 7919-3 (txt) | 2009 | Mechanical vibration - evaluation of machine vibration by measurements on rotating shafts, Part 3: Coupled Industrial Machines | ISO 7919-3:2009 |
| IS/ISO 7919-5 (pdf) IS/ISO 7919-5 (txt) | 2005 | Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts, Part 5: Machine sets in hydraulic power generating and pumping plants | ISO 7919-5:2005 |
| IS/ISO 8041 (pdf) IS/ISO 8041 (txt) | 2005 | Human response to vibration - Measuring instrumentation | ISO 8041:2005 |
| IS/ISO 8042 (pdf) IS/ISO 8042 (txt) | 1988 | Shock and Vibration Measurements - Characteristics to be Specified for Seismic Pick-ups | ISO 8042:1988 |
| IS/ISO 8568 (pdf) IS/ISO 8568 (txt) | 1989 | Mechanical shock - Testing machines - Characteristics and performance | ISO 8568:1989 |
| IS/ISO 8568 (pdf) IS/ISO 8568 (txt) | 2007 | Mechanical shock - Testing machines - Characteristics and performance | ISO 8568:2007 |
| IS/ISO 8626 (pdf) IS/ISO 8626 (txt) | 1989 | Servo-Hydraulic Test Equipment for Generating Vibration Method of Describing Characteristics | ISO 8626:1989 |
| IS/ISO 10055 (pdf) IS/ISO 10055 (txt) | 1996 | Mechanical vibration - Vibration testing requirements for shipboard equipment and machinery components | ISO 10055:1996 |
| IS/ISO 10816-2 (pdf) IS/ISO 10816-2 (txt) | 2001 | Mechanical vibration - Evalauation of machine vibration by measurements on non-rotating parts, Part 2: Land-based steam turbines and generators in excess of 50 MW | ISO 10816-2:2001 |
| IS/ISO 11342 (pdf) IS/ISO 11342 (txt) | 1998 | Mechanical vibration - Methods and criteria for the mechanical balancing of flexible rotors | ISO 11342:1998 |
| IS/ISO 13373-1 (pdf) IS/ISO 13373-1 (txt) | 2002 | Condition Monitoring and Diagnostics of Machines - Vibration Condition Monitoring, Part 1: General Procedures | ISO 13373-1:2002 |
| IS/ISO 13373-2 (pdf) IS/ISO 13373-2 (txt) | 2005 | Condition Monitoring and Diagnostics of Machines - Vibration Condition Monitoring, Part 2: Processing Analysis and Presentation of Vibration Data | ISO 13373-2:2005 |
| IS/ISO 14963 (pdf) IS/ISO 14963 (txt) | 2003 | Mechanical Vibration and Shock - Guidelines for Dynamic Tests and Investigations on Bridges and Viaducts | ISO 14963:2003 |
| IS/ISO 20283-2 (pdf) IS/ISO 20283-2 (txt) | 2008 | Mechanical Vibration - Measurement of Vibration on Ships, Part 2: Measurement of Structural Vibration | ISO 20283-2:2008 |
| IS/ISO 20806 (pdf) IS/ISO 20806 (txt) | 2004 | Mechanical Vibration - Criteria and Safeguards for the In-Situ Balancing of medium and Large Rotors | ISO 20806:2004 |
Last Updated: October 9, 2013
↑