Divisional Index ↑

Public Safety Standards of the Republic of India

Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.

Division Name: Mechanical Engineering
Section Name: Gas Cylinders (MED 16)

StandardYearTitleIBR
IS 3196-1 (pdf)2006Welded Low Carbon Steel Cylinders Exceeding 5 Litre Water Capacity for Low Pressure Liquefiable Gases, Part 1: Cylinders for liquefied Petroleum Gases (LPG)
IS 3196-2 (pdf)
IS 3196-2 (txt)
2006Welded Low Carbon Steel Cylinders Exceeding 5 Litre Water Capacity for Low Pressure Liquefiable Gases, Part 2: Cylinders for Liquefiable Non-Toxic Gases Other Than LPG
IS 3196-3 (pdf)
IS 3196-3 (txt)
2012Welded low carbon steel gas cylinder exceeding 5 litre water capacity for low pressure liquefiable gases, Part 3: Methods of test
IS 3196-4 (pdf)2001Welded Low Carbon Steel Cylinders Exceeding 5 Litre Water Capacity for Low Pressure Liquefiable Gases, Part 4: Cylinders for Toxic and Corrosive Gases (Amalgamation of IS 7680,7681 and 7682)
IS 3224 (pdf)
IS 3224 (txt)
2002Valve Fittings for Compressed Gas Cylinders Excluding Liquefied Petroleum Gas (LPG) Cylinders
IS 3710 (pdf)1978Filling Ratios for Low Pressure Liquefiable Gases Contained in Cylinders
IS 3745 (pdf)
IS 3745 (txt)
2006Yoke Type Valve Connection for Small Medical Gas Cylinders
IS 3933 (pdf)1966Colour Identification of Gas Cylinders and Related Equipment Intended for Medical Use
IS 4152 (pdf)
IS 4152 (txt)
2011Seamless Carbon Dioxide Cylinders for Fire-fighting Purposes on Boardship
IS 4379 (pdf)
IS 4379 (txt)
1981Identification of contents of industrial gas cylinders
IS 4786 (pdf)1968Variable High Pressure Regulators for Use with Liquefied Petroleum Gases
IS 5844 (pdf)1970Recommendations for Hydrostatic Stretch Testing of Compressed Gas Cylinders
IS 5845 (pdf)
IS 5845 (txt)
1993Code of practice for inspection of low pressure welded steel gas cylinders other than LPG cylinders in use
IS 5903 (pdf)
IS 5903 (txt)
1970Recommendations for safety devices for gas cylinders
IS 6044.1 (pdf)2013Code of Practice for Liquefied Petroleum Gas Storage Installations - Part 1 : Commercial and Industrial Cylinder Installations (IS 6044 : Part 1)
IS 7142 (pdf)1995Welded low carbon steel cylinders for low pressure liquifiable gases not exceeding 5 litre water capacity - Specificatiom
IS 7202 (pdf)
IS 7202 (txt)
1974Inspection Gauges for Checking Threads of Gas Cylinder Valves for Use with Breathing Apparatus
IS 7241 (pdf)
IS 7241 (txt)
1981Glossary of terms used in gas cylinder technology
IS 7285-1 (pdf)2004Refillable Seamless Steel Gas Cylinders, Part 1: Normalized Steel Cylinders
IS 7285-2 (pdf)2004Refillable Seamless Steel Gas Cylinders, Part 2: Quenched and Tempered Steel Cylinders with Tensile Strength Less Than 1 100 MPa (112 kgf/mm2)
IS 7302 (pdf)
IS 7302 (txt)
1974Valve Fittings for Gas Cylinder Valves for Use with Breathing Apparatus
IS 7312 (pdf)1993Welded and seamless steel dissolved acetylene gas cylinders
IS 8196 (pdf)
IS 8196 (txt)
2004Code of Practice for Steel Cylinders for Compressed Gases (Atmospheric Gases, Hydrogen, High Pressure Liquefiable Gases and Dissolved Acetylene Gases)
IS 8198-5 (pdf)
IS 8198-5 (txt)
1984Code of Practice for Steel Cylinders for Compressed Gases, Part 5: Liquefied Petroleum Gas (LPG)
IS 8198-6 (pdf)
IS 8198-6 (txt)
1988Code of practice for steel cylinders for compressed gases, Part 6: Liquefied chlorine gas
IS 8198-7 (pdf)
IS 8198-7 (txt)
1988Code of practice for steel cylinders for compressed gases, Part 7: Ammonia gas
IS 8198-8 (pdf)
IS 8198-8 (txt)
1993Code of practice for steel cylinders for compressed gases, Part 8: Common organic refrigerant gases
IS 8198-9 (pdf)
IS 8198-9 (txt)
1988Code of practice for steel cylinders for compressed gases, Part 9: Sulphur dioxide gas
IS 8198-10 (pdf)
IS 8198-10 (txt)
1980Code of Practice for Steel Cylinders for Compressed Gases, Part X: Methyl Bromide Gas
IS 8198-11 (pdf)
IS 8198-11 (txt)
1988Code of practice for steel cylinders for compressed gases, Part 11: Methyl chloride gas
IS 8198-12 (pdf)
IS 8198-12 (txt)
1982Code of practice for steel cylinders for compressed gases, Part 12: Gases for medical use
IS 8198 (pdf)2004Steel Cylinders for Compressed Gases (Atmospheric Gases, Hydrogen, High Pressure Liquefiable Gases and Dissolved Acetylene Gases) - Code of Practice [Amalgamation of IS 847(Part 1 to 4)]
IS 8433 (pdf)
IS 8433 (txt)
1984Code of practice for visual inspection of dissolved acetylene gas cylinders
IS 8451 (pdf)
IS 8451 (txt)
2009PERIODIC INSPECTION AND TESTING OF HIGH PRESSURE GAS CYLINDERSCODE OF PRACTICE
IS 8452 (pdf)1977Glossary of terms used in acetylene generators
IS 8471 (pdf)
IS 8471 (txt)
2003Acetylene Generators - Requirements(Amalgamation of IS 8471(Part 1 to 5)
IS 8737 (pdf)
IS 8737 (txt)
1995Valve fittings for use with liquefied petroleum gas (LPG) cylinders of more than 5 litre water capacity
IS 8775 (pdf)
IS 8775 (txt)
1978Filling pressure and corresponding developed pressure for permanent gases contained in gas cylinders
IS 8776 (pdf)
IS 8776 (txt)
1988Valve Fittings for Use with Liquefied Petroleum Gas (LPG) Cylinders UP TO and Including 5-Litre Water Capacity
IS 8866 (pdf)
IS 8866 (txt)
1978Filling ratios and corresponding developed pressure for high pressure liquefiable gases contained in gas cylinder
IS 8867 (pdf)
IS 8867 (txt)
1978Saturated vapour pressure and test pressure for low pressure liquefiable gases contained in gas cylinders
IS 8868 (pdf)1988Periodical inspection interval of gas cylinders in use
IS 9121 (pdf)
IS 9121 (txt)
2005Inspection Gauges for Checking Type 1 (Size 2) Taper Threads of Gas Cylinder Valves, Taper 1 in 16
IS 9122 (pdf)2008Inspection Gauges for Checking Type 2 Taper Threads of Gas Cylinder Valves, Taper 3 in 25
IS 9200 (pdf)
IS 9200 (txt)
1988Methods of Disposal of Unserviceable Compressed Gas Cylinders
IS 9639 (pdf)1980Code of practice for visual inspection of low pressure welded steel gas cylinders during manufacture
IS 9687 (pdf)
IS 9687 (txt)
1980Specification for Inspection Gauges for Checking Type 1 (Size 1) Taper Threads of Gas Cylinder Valves, Taper 1 in !6
IS 9798 (pdf)
IS 9798 (txt)
1995Low Pressure Regulators for Use with Liquefied Petroleum Gas (LPG) Mixtures
IS 11006 (pdf)
IS 11006 (txt)
2011Flash Back Arrestor (Flame Arrestor)
IS 12300 (pdf)1988Valve Fittings for refrigerant Cylinders -
IS 12586 (pdf)1988Brazed Low Carbon Steel Gas Cylinders Not Exceeding 13 Litre Water Capacity
IS 12936 (pdf)1990Code for basic requirements for delivery persons engaged in the delivery of LPG cylinders
IS 13258 (pdf)
IS 13258 (txt)
1991welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gas - Code of practice for inspection and reconditioning of used LPG cylinders
IS 13497 (pdf)1992Fusible plug for dissolved acetylene gas cylinder
IS 14899 (pdf)
IS 14899 (txt)
2000Liquefied Petroleum Gas (LPG) Containers for Automotive Use
IS 15100 (pdf)
IS 15100 (txt)
2001Multifunction Valve Assembly for Permanently Fixed Liquefied Petroleum Gas (LPG) Containers for Automotive Use
IS 15190-1 (pdf)
IS 15190-1 (txt)
2002Acetylene Pipelines - Code of Practice, Part 1: for Pressures Up to 155 kPa (g)
IS 15190-2 (pdf)
IS 15190-2 (txt)
2002Acetylene Pipelines - Code of Practice, Part 2: For Pressures from 155 kPa (g) to 2550 kPa (g)
IS 15490 (pdf)2004Cylinders for On-Board Storage of Compressed Natural Gas As a Fuel for Automotive VehiclesISO 9809-1
IS 15637 (pdf)2006Welded stainless steel cylinders for liquefied petroleum gases (LPG) from 0.5 litre to 250 litre water capacity
IS 15660 (pdf)
IS 15660 (txt)
2006Refillable transportable seamless aluminium alloy gas cylinders
IS 15737 (pdf)
IS 15737 (txt)
2006Cylinders for permanent gases - inspection at time of fillingISO 10463
IS 15894 (pdf)
IS 15894 (txt)
2011Inspection Gauges for Checking Type 1 (Sizes 1,2and3) Taper Threads of Gas Cylinder Valves and Cylinder Necks - Taper 1 In 16 on Diameter -
IS 15935 (pdf)
IS 15935 (txt)
2011Composite Cylinders for on-board Storage of Compressed Natural Gas(CNG) as a Fuel for Automotive Vehicle
IS 15966 (pdf)
IS 15966 (txt)
2013Refillable Welded Steel Cylinder for Liquefied Petroleum Gas (LPG) - Procedure for Checking Before, During and After Drilling
IS/ISO 11114-2 (pdf)
IS/ISO 11114-2 (txt)
2006Transportable Gas Cylinders - Compatibility of Cylinder and Valve Materials with Gas Contents, Part 2: Non-Metallic MaterialsISO 11114-2
IS/ISO 11114-4 (pdf)
IS/ISO 11114-4 (txt)
2005Transportable Gas Cylinders - Compatibility of Cylinder and Valve Materials with Gas Contents, Part 4: Test Methods for Selecting Metallic Materials Resistant to Hydrogen EmbrittlementISO 11114-4
IS/ISO 13985 (pdf)
IS/ISO 13985 (txt)
2006Liquid Hydrogen - Land Vehicles Fuel TanksISO 13985:2006
SP 9 (pdf)
SP 9 (txt)
1973Technical data sheet for gases conveyed in cylinders

Last Updated: October 9, 2013