Divisional Index ↑

Public Safety Standards of the Republic of India

Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.

Division Name: Electronics and Information Technology
Section Name: Semiconductor and Other Electronic Components and Devices (LITD 5)

StandardYearTitleIBR
IS 590 (pdf)1964Fixed Paper Dielectric Capacitors for DC
IS 824 (pdf)1965Preferred Values for Resistors and Capacitors
IS 1885-6 (pdf)
IS 1885-6 (txt)
1978Electrotechnical vocabulary, Part 6: Printed circuits
IS 1885-7 (pdf)
IS 1885-7 (txt)
2001Electrotechnical vocabulary, Part 7: Semiconductor devices and Integrated circuits
IS 1885-12 (pdf)
IS 1885-12 (txt)
1966Electrotechnical Vocabulary, Part 12: Ferrimagnetic oxide materials
IS 1885-31 (pdf)
IS 1885-31 (txt)
1971Electrotechnical vocabulary, Part 31: Magnetism
IS 1885-41 (pdf)
IS 1885-41 (txt)
1975Electrotechnical Vocabulary - Part XLI : Non-reciprocal Electromagnetic Components
IS 1885-44 (pdf)
IS 1885-44 (txt)
2001Electrotechnical Vocabulary, Part 44: Piezoelectric DevicesIEC 60050-561
IS 1885-45 (pdf)
IS 1885-45 (txt)
1977Electrotechnical Vocabulary - Part XLV : Capacitors
IS 1885-46 (pdf)
IS 1885-46 (txt)
1977Electrotechnical Vocabulary - Part XLVI : Resistors
IS 2001 (pdf)1968Fixed Silvered Mica Capacitors
IS 2032-8 (pdf)
IS 2032-8 (txt)
1965Graphical symbols used in electrotechnology, Part 8: Semiconductor devices
IS 2032-17 (pdf)1975Graphical symbols used in electrotechnology, Part 17: Ferrite cores and magnetic storage matrices
IS 2032-24 (pdf)
IS 2032-24 (txt)
1980Graphical symbols used in electrotechnology, Part 24: Binary logic elementsIEC PUB 117-13
IS 2786-1 (pdf)
IS 2786-1 (txt)
1978Ceramic Dielectric Capacitors, Type 2 - Part I : General Requirements and Methods of Test
IS 2786-2 (pdf)1984ceramic dielectric capacitors, type 2: Part 2 FCCG 01 and FCCG 02 capacitors
IS 2935 (pdf)
IS 2935 (txt)
1980Guide for use of quartz crystal units for frequency control and selectionIEC 122-2
IS 3671-1 (pdf)
IS 3671-1 (txt)
1980Air Dielectric Variable Tuning Capacitors, Part I: Tests and General Requirements
IS 3700-7 (pdf)
IS 3700-7 (txt)
1970Essential Ratings and Characteristics of Semiconductor Devices, Part VII: Reverse Blocking Triode Thyristors
IS 3715-4 (pdf)
IS 3715-4 (txt)
1971Letter symbols for semiconductor devices, Part 4: Thyristors
IS 3723-1 (pdf)
IS 3723-1 (txt)
1978Capacitors for Radio Interference Suppression, Part I: General Requirements and Methods of Tests
IS 3723-2 (pdf)1983Capacitors for Radio Interference Suppression, Part 2: Type Fcrs 1
IS 3723-3 (pdf)1983Capacitors for Radio Interference Suppression, Part 3: Type FCRS 2
IS 4317 (pdf)
IS 4317 (txt)
1983Aluminium Electrolytic Capacitors with Non-solid Electrolyte
IS 4400-7 (pdf)
IS 4400-7 (txt)
1971Methods of measurements on semiconductor devices, Part 7: Reverse blocking triode thyristors
IS 4411 (pdf)
IS 4411 (txt)
1967Code for designation of semiconductor devices
IS 4570-1 (pdf)
IS 4570-1 (txt)
1983Crystal Unit Holders, Part 1: General Requirements and TestsIEC 122-3
IS 4570-2 (pdf)1999Crystal Unit Holders, Part 2: Metal, Solder-sealed, Two Pin Crystal Unit Holders Types AA And ABIEC 122-3
IS 4570-3 (pdf)1984Crystal Unit Holders, Part 3: Tube Type Crystal Unit Holders (Glass) Types AP, AR, AS, AT and AUIEC 122-3
IS 4570-4 (pdf)1999Crystal Unit Holders, Part 4: Metal, Solder-Sealed, Two Pin Crystal Unit Holders Types BC and BC/1IEC 122-3
IS 4570-5 (pdf)1999Crystal Unit Holders, Part 5: Metal, Solder Sealed, Two Pin Crystal Unit Holders Types BF, BF/1 and BG, BG/1IEC 122-3
IS 4570-6 (pdf)1999Crystal Unit Holders, Part 6: Metal, Solder-Sealed, Two Pin Crystal Unit Holders Type CXIEC 122-3
IS 4570-7 (pdf)1985Crystal unit holders, Part 7: Microminiature, metal, solder seal, two-wire crystal unit holder, type DJIEC 122-3
IS 4570-8 (pdf)1999Crystal Unit Holders, Part 8: Metal, Welded, Three Wire Crystal Unit Holders Type DKIEC 122-3
IS 4570-9 (pdf)1999Crystal Unit Holders, Part 9: Metal, Welded, Two-Pin Crystal Unit Holders Type DNIEC 122-3
IS 4570-10 (pdf)1999Crystal Unit Holders, Part 10: Metal, Welded, Two-pin Crystal Unit Holders Types DP And EHIEC 122-3
IS 4570-11 (pdf)1999Crystal Unit Holders, Part 11: Metal, Welded, Two-Pin Crystal Unit Holder Type DQIEC 122-3
IS 4570-12 (pdf)1989crystal unit holders, Part 12: Microminiature, metal, cold-welded, two-wire crystal unit holder type EBIEC 122-3
IS 4570-13-1 (pdf)1993Crystal Unit Holders, Part 13: Quartz Crystal Unit Holder Outline for Automatic Handling, Section 1: Metal, Sealed, Two Pin Crystal Unit Holder Type CU 01
IS 4570-13-2 (pdf)1993Crystal Unit Holders, Part 13: Quartz Crystal Unit Holder Outline for Automatic Handling, Section 2: Metal, Sealed, Two Pin Crystal Unit Holder Type CU 02
IS 4570-13-3 (pdf)1993Crystal Unit Holders, Part 13: Quartz Crystal Unit Holder Outline for Automatic Handling, Section 3: Metal, Sealed, Two Pin Crystal Unit Holder Type CU 03
IS 4570-13-4 (pdf)1993Crystal Unit Holders, Part 13: Quartz Crystal Unit Holder Outline for Automatic Handling, Section 4: Metal, Sealed, Two Pin Crystal Unit Holder Type CU 04
IS 4570-13-5 (pdf)1993Crystal Unit Holders, Part 13: Quartz Crystal Unit Holder Outline for Automatic Handling, Section 5: Metal, Sealed, Two Pin Crystal Unit Holder Type CU 05
IS 4633 (pdf)1968Fixed Metallized-paper Dielectric Capacitor for Direct Current
IS 5000-OD1 (pdf)1969Dimensions of Semiconductor Devices, Device Outline OD1I
IS 5000-OD4 (pdf)1969Dimensions of Semiconductor Devices, Device Outline OD4I
IS 5000-OD5 (pdf)1969Dimensions of Semiconductor Devices, Device Outline OD5I
IS 5000-OD6 (pdf)1969Dimensions of Semiconductor Devices, Device Outline OD6I
IS 5000-OD7 (pdf)1969Dimensions of Semiconductor Devices, Device Outline OD7I
IS 5000-OD8 (pdf)1969Dimensions of Semiconductor Devices, Device Outline OD8I
IS 5000-OD9 (pdf)1986Dimensions of Semiconductor Devices, Device Outline OD9I
IS 5000-OD10 (pdf)1971Dimensions of Semiconductor Devices, Device Outline OD10I
IS 5000-OD11 (pdf)1971Dimensions of Semiconductor Devices, Device Outline OD11I
IS 5000-OD12 (pdf)1971Dimensions of Semiconductor Devices, Device Outline OD12I
IS 5000-OD13 (pdf)1971Dimensions of Semiconductor Devices, Device Outline OD13I
IS 5000-OD14 (pdf)1971Dimensions of Semiconductor Devices, Device Outline OD14I
IS 5000-OD15 (pdf)1973Dimensions of Semiconductor Devices, Device Outline OD15I
IS 5000-OD16 (pdf)1973Dimensions of Semiconductor Devices, Device Outline OD16I
IS 5000-OD17 (pdf)1974Dimensions of Semiconductor Devices, Device Outline OD17I
IS 5000-OD18 (pdf)1974Dimensions of Semiconductor Devices, Device Outline OD18I
IS 5000-OD19 (pdf)1974Dimensions of Semiconductor Devices, Device Outline OD19I
IS 5000-OD20 (pdf)1978Dimensions of Semiconductor Devices, Device Outline OD20I
IS 5000-OD21 (pdf)1979Dimensions of Semiconductor Devices, Device Outline OD21I
IS 5000-OD23 (pdf)1978Dimensions of Semiconductor Devices, Device Outline OD23I
IS 5000-OD25 (pdf)1978Dimensions of Semiconductor Devices, Device Outline OD25I
IS 5000-OD26 (pdf)1978Dimensions of Semiconductor Devices, Device Outline OD26I
IS 5000-OD27 (pdf)1978Dimensions of Semiconductor Devices, Device Outline OD27I
IS 5000-OD28 (pdf)1978Dimensions of Semiconductor Devices, Device Outline OD28I
IS 5000-OD29 (pdf)1979Dimensions of Semiconductor Devices, Device Outline OD29I
IS 5000-OD31 (pdf)1981Dimensions of Semiconductor Devices, Device Outline OD31I
IS 5000-OD32 (pdf)1981Dimensions of Semiconductor Devices, Device Outline OD32I
IS 5000-OD33 (pdf)1981Dimensions of Semiconductor Devices, Device Outline OD33I
IS 5000-OD34 (pdf)1981Dimensions of Semiconductor Devices, Device Outline OD34I
IS 5000-OD35 (pdf)1981Dimensions of Semiconductor Devices, Device Outline OD35I
IS 5000-OD36 (pdf)1981Dimensions of Semiconductor Devices, Device Outline OD36I
IS 5000-OD37 (pdf)1982Dimensions of Semiconductor Devices, Device Outline OD37I
IS 5000-OD38 (pdf)1984Dimensions of Semiconductor Devices, Device Outline OD38I
IS 5000-OD39 (pdf)1986Dimensions of Semiconductor Devices, Device Outline OD39I
IS 5000-OD40 (pdf)1986Dimensions of Semiconductor Devices, Device Outline OD40I
IS 5000-OD41 (pdf)1986Dimensions of Semiconductor Devices, Device Outline OD41I
IS 5000-OD42 (pdf)1986Dimensions of Semiconductor Devices, Device Outline OD42I
IS 5000-OD43 (pdf)1986Dimensions of Semiconductor Devices, Device Outline OD43I
IS 5000-OD44 (pdf)1986Dimensions of Semiconductor Devices, Device Outline OD44I
IS 5000-OD45 (pdf)1986Dimensions of Semiconductor Devices, Device Outline OD45I
IS 5000-OD46 (pdf)1986Dimensions of Semiconductor Devices, Device Outline OD46I
IS 5000-OD47 (pdf)1986Dimensions of Semiconductor Devices, Device Outline OD47I
IS 5001-1 (pdf)
IS 5001-1 (txt)
1969Guide for Preparation of Drawings of Semiconductor DevicesIEC 60191 - 1:1966
IS 5001-2 (pdf)
IS 5001-2 (txt)
1973Guide for preparation of drawings of semiconductor devices and integrated circuits, Part 2: Integrated circuits
IS 5027 (pdf)
IS 5027 (txt)
1969Method of measurement of current noise generated in fixed resistors
IS 5469-1 (pdf)1969Code of Practice for the Use of Semiconductor Junction Devices
IS 5469-2 (pdf)
IS 5469-2 (txt)
1973Code of practice for the use of semiconductor junction devices, Part 2: Diodes
IS 5469-3 (pdf)
IS 5469-3 (txt)
1973Code of practice for the use of semiconductor junction devices, Part 3: Thyristors
IS 5475-1 (pdf)
IS 5475-1 (txt)
1978Polystyrene Film Dielectric Capacitors, Part I: General Requirements and Methods of Tests
IS 5475-2 (pdf)
IS 5475-2 (txt)
1979Polystyrene Film Dielectric Capacitors, Part 2: Type FCPS 1
IS 5475-4 (pdf)1985Fixed Polystyrene Film Dielectric Capacitors, Part 4: Type FCPS-3
IS 5575-1 (pdf)1970Temperature Control Devices for Quartz Crystal Units (Heating Type) - Part I : General Requirements and TestsIEC 314
IS 5575-2 (pdf)1978Temperature Control Devices for Quartz Crystal Units (Heating Type), Part 2: Pin Connections and Bases
IS 5786-1 (pdf)
IS 5786-1 (txt)
1978Fixed Resistors General Purpose, Low Power, Part I: General Requirements and Methods of Tests
IS 5786-3 (pdf)1982Fixed Resistors General Purpose, Low Power, Part 3: Resistors Type FRLP 2
IS 5786-4 (pdf)1982Fixed Resistors General Purpose, Low Power, Part IV: Resistors Type FRLP 3
IS 5786-5 (pdf)1982Fixed Resistors General Purpose, Low Power, Part V: Resistors Type FRLP 4
IS 5786-6 (pdf)1982Fixed Resistors, General Purposes, Low Power, Part VI: Resistors Type FRLP 5
IS 5786-7 (pdf)
IS 5786-7 (txt)
1982Fixed Resistors, General Purpose, Low Power, Part 7: Resistor Type FRLP 6
IS 5786-10 (pdf)1982Fixed Resistors, General Purpose, Low Power, Part X: Resistors Type FRLP 9
IS 5786-12 (pdf)1982Fixed Resistors, General Purpose, Low Power, Part XII: Resistors Type FRLP 11
IS 5921-1 (pdf)
IS 5921-1 (txt)
1993Metal-clad base materials for printed circuits for use in electronic and telecommunication equipment, Part 1: General requirements and testIEC 249-1
IS 5921-2 (pdf)
IS 5921-2 (txt)
1973Metal-Clad Base Material for Printed Circuits for Use in Electronic and Telecommunication Equipment, Part 2: Paper Phenolic Copper-Clad Laminated Sheet-PF-CP-CU Economic GradeIEC 249-2
IS 5921-3 (pdf)
IS 5921-3 (txt)
1978Metal-Clad Base Materials for Printed Circuits for Use in Electronic and Telecommunication Equipment, Part 3: Phenolic Cellulose Paper Copper-Clad Laminated Sheet PF-CP-Cu (High Electric Grade)IEC 249-2
IS 5921-4 (pdf)
IS 5921-4 (txt)
1987Metal-clad Base Materials for Printed Circuits for Use in Electronic and Telecommunication Equipment, Part 4: Phenolic Cellulose Paper Copper Clad Laminated Sheet of Defined FlammabilityIEC 249-2
IS 5921-5 (pdf)
IS 5921-5 (txt)
1987Metal Clad Base Materials for Printed Circuits for Use in Electronic and Telecommunication Equipment, Part 5: Epoxide Cellulose Paper Copper Clad Laminated Sheet of Defined Flammability (vertical burning test)IEC 249-2
IS 5921-6 (pdf)
IS 5921-6 (txt)
1987Metal Clad Base Materials for Use in Electronic and Telecommunication Equipment, Part 6: Epoxide Woven Glass Fabric Copper Clad Laminated Sheet, General Purpose GradeIEC 249-2
IS 5921-7 (pdf)
IS 5921-7 (txt)
1987Metal Clad Base Materials for Printed Circuits for Use in Electronic and Telecommunication Equipment, Part 7: Epoxide Woven Glass Fabric Copper-Clad Laminated Sheet of Defined FlammabilityIEC 249-2
IS 5921-8 (pdf)
IS 5921-8 (txt)
1988Metal-clad Base Materials for Printed Circuits for Use in Electronic and Telecommunication Equipment, Part 8: Flexible Copper-clad Polyster (PETP) FilmIEC 249-2
IS 5921-9 (pdf)
IS 5921-9 (txt)
1988Metal-Clad Base Materials for Printed Circuits for Use in Electronic and Telecommunication Equipment, Part 9: Epoxide Cellulose Paper Core, Epoxide Glass Cloth Surfaces Copper-Clad Laminated Sheet of Defined FlammabilityIEC 249-2
IS 5921-10 (pdf)
IS 5921-10 (txt)
1988Metal clad base materials for printed circuits for use in electronic and telecommunication equipment, Part 10: Epoxide non-woven/glass reinforced/woven copper-clad laminated sheet of defined flammability(VBT)IEC 249-2
IS 5921-11 (pdf)
IS 5921-11 (txt)
1988Metal clad base materials for printed circuits for use in electronic and telecommunication equipment, Part 11: Thin epoxide woven glass fabric copper clad laminated sheet, general purpose grade,for use in the fabrication of multilayIEC 249-2
IS 5921-12 (pdf)
IS 5921-12 (txt)
1988Specification forMetal-Clad Base Materials for Printed Circuits for Use in Electronic and Telecommunication Equipment, Part 12: Thin Epoxide Woven Glass Fabric Copper-Clad Laminated Sheet of Defined Flammability for Use in Fabrication of MultilayerIEC 249-2
IS 6077-1 (pdf)
IS 6077-1 (txt)
1998Permanent Magnets, Part 1: General Requirements and Tests
IS 6133-1 (pdf)
IS 6133-1 (txt)
1971Piezo-electric Filters for Use in Telecommunication and Measuring Equipment, Part I: General Requirements and Tests
IS 6235 (pdf)
IS 6235 (txt)
1992Dimensions of pot-cores made of magnetic oxides and associated partsIEC Pub(133)1985
IS 6297-1 (pdf)1971Specification for Transformers and Inductors (Power, Audio, Pulse and Switching) for Electronic Equipment, Part I: General Requirements and Tests
IS 6297-2 (pdf)
IS 6297-2 (txt)
1973Transformers and Inductors (Power, Audio, Pulse and Switching) for Electronic Equipment, Part II: Power Transformers
IS 6297-3 (pdf)
IS 6297-3 (txt)
1974Transformers and inductors (Power, audio, pulse and switching) for electronic equipment, Part 3: Audio frequency transformers and chokes
IS 6297-4 (pdf)
IS 6297-4 (txt)
1974Transformers and Inductors (Power, Audio, Pulse and Switching) for Electronic Equipment, Part 4: Pulse and Switching Transformers
IS 6537 (pdf)
IS 6537 (txt)
1972Guide to the use of temperature control devices for crystal units
IS 6553 (pdf)
IS 6553 (txt)
1971Environmental requirements for semiconductor devices and integrated circuits
IS 7305 (pdf)
IS 7305 (txt)
1984Fixed Capacitors Used in Electronic Equipment
IS 7405-1 (pdf)
IS 7405-1 (txt)
1994printed wiring boards, Part 1: General requirements and methods of testIEC 326-2
IS 7405-2 (pdf)
IS 7405-2 (txt)
1984printed wiring boards, Part 2: Single and double sided printed boards with plain holesIEC 326-4
IS 7410-1 (pdf)1974Guide to the use of the piezoelectric filters, Part 1: Quartz crystal filtersIEC 368-1971
IS 7410-2 (pdf)
IS 7410-2 (txt)
1974Guide to the use of the piezoelectric filters, Part 2: piezoelectric ceramic filtersIEC 368-1971
IS 7412 (pdf)
IS 7412 (txt)
1974Life testing of semiconductor devices
IS 7416-1 (pdf)1986Dimensions for TV ferrite components, Part 1: Cores for deflection coil
IS 7416-2 (pdf)1991Dimensions for TV ferrite components, Part 2: Ferrite rod for linearity control unit
IS 7416-3 (pdf)1976Dimensions for TV ferrite components, Part 3: Tuning magnet for linearity control unit
IS 7416-4 (pdf)1991Dimensions for TV ferrite components, Part 4: Ring magnet for linearity control unit
IS 7416-5 (pdf)1976Dimensions for TV ferrite components, Part 5: Segment magnet for linearity control unit
IS 7416-6 (pdf)1987Dimensions for TV ferrite components, Part 6: Beam centering magnet for deflection coil
IS 7416-7 (pdf)1976Dimensions for TV ferrite components, Part 7: Pin cushion correction magnet for deflection coil
IS 7416-8 (pdf)1985Dimensions for TV Ferrite Components, Part 8: U, U Core Assembly for Line Output Transformer
IS 7416-10 (pdf)1987Dimensions for TV Ferrite Components, Part 10: Corner Correction Magnet
IS 7416-11 (pdf)1976Dimensions for TV ferrite components, Part 11: Balun core
IS 7416-12 (pdf)1984Dimensions for TV ferrite components, Part 12: U core for line driver transformer
IS 7430 (pdf)1974Dimensions of screw cores made of ferrimagnetic oxides
IS 7440-2 (pdf)
IS 7440-2 (txt)
1974Essential ratings and characteristics of analogue integrated circuits, Part 2: Telecommunication amplifiers (audio, video and multichannel)
IS 7440-3-1 (pdf)
IS 7440-3-1 (txt)
1976Essential ratings and characteristics of analogue integrated circuits, Part 3: Operational amplifier, Section 1: Having two input and one output
IS 7440-3-2 (pdf)
IS 7440-3-2 (txt)
1977Essential ratings and characteristics of analogue integrated circuits, Part 3: Operational amplifier, Section 2: Having two input and two outputs
IS 7527 (pdf)1992Dimensions of loudspeaker magnets
IS 7616 (pdf)1974Guide for calculation of the effective parameters of magnetic piece partsIEC 205
IS 7687 (pdf)
IS 7687 (txt)
1980Methods of measurement for cores for inductors and transformers for telecommunicationsIEC 367-1
IS 7748-1 (pdf)
IS 7748-1 (txt)
1975Variable Capacitors, Part I: Tests and General Requirements
IS 7930 (pdf)1976Dimensions of toroids made of magnetic oxides or iron powderIEC 525
IS 7934 (pdf)
IS 7934 (txt)
1981Dimensions of square cores made of magnetic oxides and associated partsIEC 431
IS 7957-1 (pdf)2001Measurement of Quartz Crystal Unit Parameters by Zero Phase Technique in A p-Network, Part 1: Basic Method for The Measurement of Resonance Frequency and Resonance Resistance of Quartz Crystal Units by Zero Phase Technique in a p-NetworkIEC 60444-1
IS 7962 (pdf)
IS 7962 (txt)
1975Methods of measurement for piezoelectric vibrations operating over the frequency range up to 30 MHzIEC 302
IS 8011 (pdf)
IS 8011 (txt)
1976Methods for the measurement of frequency and equivalent resistance of unwanted resonance of filter crystal unitsIEC 283
IS 8083 (pdf)1976Dimensions of ceramic dielectric capacitors of the plate type
IS 8186 (pdf)
IS 8186 (txt)
1976Marking codes for values and tolerance of resistors and capacitors
IS 8201 (pdf)
IS 8201 (txt)
1976High Frequency Wideband Matching Transformer
IS 8238 (pdf)
IS 8238 (txt)
1976Guide for use of variable capacitors in electronic equipment
IS 8271-1 (pdf)
IS 8271-1 (txt)
1981Quartz Crystal Units Used for Frequency Control and Selection, Part I: General Requirements and TestsIEC 122
IS 8271-2-1 (pdf)1981Quartz Crystal Units Used in Oscillators, Part II: Series AA, Section 1: Quartz Crystal Unit Type AA-01
IS 8271-2-2 (pdf)1981Quartz Crystal Units Used in Oscillators, Part 2: Series AA, Section 2: Quartz Crystal Unit Yype AA-02
IS 8271-2-3 (pdf)1981Quartz Crystal Units Used in Oscillators, Part 2: Series AA, Section 3: Quartz Crystal Unit Type AA-03
IS 8271-2-4 (pdf)1981Quartz Crystal Units Used in Oscillators, Part 2: Series AA, Section 4: Quartz Crystal Unit Type AA-04
IS 8271-2-5 (pdf)1981Quartz Crystal Units Used in Oscillators, Part 2: Series AA, Section 5: Quartz Crystal Unit Type AA-05
IS 8271-2-6 (pdf)1981Quartz Crystal Units used in Oscillators, Part 2: Series AA, Section 6: Quartz Crystal Unit Type AA-06
IS 8271-2-7 (pdf)1982Quartz Crystal Units Used for Frequency Control and Selection, Part 2: Series AA for Oscillators, Section 7: Quartz Crystal Unit Type BC-07
IS 8271-2-8 (pdf)1982Quartz Crystal Units Used for Frequency Control and Selection, Part 2: Series AA for Oscillators, Section 8: Quartz Crystal Unit Type AA-08
IS 8271-2-9 (pdf)1982Quartz Crystal Units Used for Frequency Control and Selection, Part 2: Series AA for Oscillators, Section 9: Quartz Crystal Unit Type AA-09
IS 8271-2-10 (pdf)1984Quartz Crystal Units Used for Frequency Control and Selection, Part 2: Series AA for Oscillators, Section 10: Quartz Crystal Unit Type AA-10
IS 8271-2-11 (pdf)1984Quartz crystal units used for frequency control and selection, Part 2: Series AA for oscillators, Section 11: Quartz crystal unit type AA-11
IS 8271-2-12 (pdf)1984Quartz Crystal Units Used for Frequency Control and Selection, Part 2: Series AA for Oscillators, Section 12: Quartz Crystal Unit Type AA-12
IS 8271-2-13 (pdf)1984Quartz Crystal Units Used for Frequency Control and Selection, Part 2: Series AA for Oscillators, Section 13: Quartz Crystal Unit
IS 8271-2-14 (pdf)1984Quartz crystal units used for frequency control and selection, Part 2: Series AA for oscillators, Section 14: Quartz crystal unit type AA-14
IS 8271-2-15 (pdf)1985Quartz Crystal Units Used for Frequency Control and Selection, Part 2: Series AA for Oscillators, Section 15: Quartz Crystal Unit Type AA-15
IS 8271-2-16 (pdf)1985Quartz Crystal Units Used for Frequency Control and Selection, Part 2: Series AA for Oscillators, Section 16: Quartz Crystal Unit Type AA-16
IS 8271-2-17 (pdf)1985Quartz Crystal Units Used for Frequency Control and Selection, Part 2: Series AA for Oscillators, Section 17: Quartz Crystal Unit Type AA-17
IS 8271-2-18 (pdf)1985Quartz Crystal Units Used for Frequency Control and Selection, Part 2: Series AA for Oscillators, Section 18: Quartz Crystal Unit Type AA-18
IS 8271-2-19 (pdf)1985Quartz Crystal Units Used for Frequency Control and Selection, Part 2: Series AA for Oscillator, Section 19: Quartz Crystal Unit
IS 8271-2-20 (pdf)1985Quartz Crystal Units Used for Frequency Control and Selection, Part 2: Series AA for Oscillators, Section 20: Quartz Crystal Unit Type AA-20
IS 8271-2-21 (pdf)1985Quartz Crystal Units Used for Frequency Control and Selection, Part 2: Series AA for Oscillators, Section 21: Quartz Crystal Unit Type AA-21
IS 8271-2-22 (pdf)1985Quartz Crystal Units Used for Frequency Control and Selection, Part 2: Series AA for Oscillators, Section 22: Quartz Crystal Unit Type AA-22
IS 8271-3-1 (pdf)1982Specification, for Quartz Crystal Units Used for Frequency Control and Selection, Part 3: Series bc for Oscillators, Section 1: Quartz Crystal Unit Type BC-01
IS 8271-3-2 (pdf)1982Quartz Crystal Units Used for Frequency Control and Selection, Part 3: Series, BC for Oscillators, Section 2: Quartz Crystal Unit Type BC-02
IS 8271-3-3 (pdf)1982Quartz Crystal Units Used for Frequency Control and Selection, Part 3: Series BC for Oscillators, Section 3: Quartz Crystal Unit Type BC-03
IS 8271-3-4 (pdf)1982Quartz Crystal Units Used for Frequency Control and Selection, Part 3: Series BC for Oscillators, Section 4: Quartz Crystal Unit Type BC-04
IS 8271-3-5 (pdf)1982Quartz Crystal Units Used for Frequency Control and Selection, Part 3: Series BC for Oscillators, Section 5: Quartz Crystal Unit Type BC-05
IS 8271-3-6 (pdf)1982Quartz Crystal Units Used in Oscillators, Part 3: Series BC, Section 6: Quartz Crystal Unit Type BC-06
IS 8271-3-7 (pdf)1982Quartz Crystal Units Used in Oscillators, Part 3: Series BC, Section 7: Quartz Crystal Unit Type BC-07
IS 8271-3-8 (pdf)1982Quartz crystal units used for frequency control and selection, Part 3: Series BC for oscillators, Section 8: Quartz crystal unit type BC-08
IS 8271-3-9 (pdf)1982Quartz Crystal Units Used for Frequency Control and Selection, Part 3: Series BC for Oscillators, Section 9: Quartz Crystal Unit Type BC-09
IS 8271-4-1 (pdf)1983Quartz Crystal Units Used for Frequency Control and Selection, Part 4: Series AB for Oscillators, Section 1: Quartz Crystal Unit Type AB-01
IS 8271-4-2 (pdf)1983Specification FOR Quartz Crystal Units Used for Frequency Control and Selection, Part 4: Series ab for Oscillators, Section 2: Quartz Crystal Unit Type AB-02
IS 8271-4-3 (pdf)1984Quartz Crystal Units Used for Frequency Control and Selection, Part 4: Series AB for Oscillators, Section 3: Quartz Crystal Unit Type AB-03
IS 8271-4-4 (pdf)1984Quartz Crystal Units Used for Frequency Control and Selection, Part 4: Series AB for Oscillators, Section 4: Quartz Crystal Unit Type AB-04
IS 8271-5-1 (pdf)1986Quartz Crystal Units Used for Frequency Control and Selection, Part 5: Series CX for Oscillators, Section 1: Quartz Crystal Unit Type CX-01
IS 8271-5-2 (pdf)1986Quartz Crystal Units Used for Frequency Control and Selection, Part 5: Series CX for Oscillators, Section 2: Quartz Crystal Unit Type CX-02
IS 8271-5-3 (pdf)1986Quartz Crystal Units Used for Frequency Control and Selection, Part 5: Series CX for Oscillators, Section 3: Quartz Crystal Unit Type CX-06
IS 8271-5-4 (pdf)1986Quartz Crystal Units Used for Frequency Control and Selection, Part 5: Series CX for Oscillators, Section 4: Quartz Crystal Unit Type CX-04
IS 8271-5-5 (pdf)1986Quartz Crystal Units Used for Frequency Control and Selection, Part 5: Series CX for Oscillator, Section 5: Quartz Crystal Unit Type CX-05
IS 8271-5-6 (pdf)1988Quartz Crystal Units Used for Frequency Control and Selection, Part 5: Series CX for Oscillators, Section 6: Quartz Crystal Unit type CX-06
IS 8271-5-7 (pdf)1989Quartz Crystal Units Used for Frequency Control, Part 5: Series CX for Oscillators, Section 7: Quartz Crystal Unit Type CX-07
IS 8271-5-8 (pdf)1989Quartz Crystal Units Used for Frequency Control and Selection, Part 5: Series CX for Oscillators, Section 8: Quartz Crystal Unit Type CX-08
IS 8271-5-9 (pdf)1989Quartz crystal units used for frequency control and selection, Part 5: Series CX for Oscillators, Section 9: Quartz crystal unit Type CX-09
IS 8271-5-10 (pdf)1989Quartz Crystal Units Used for Frequency Control and Selection, Part 5: Series Cx for Oscillators, Section 10: Quartz Crystal Unit Type CX-10
IS 8271-5-11 (pdf)1990Quartz Crystal Units Used for Frequency Control and Selection, Part 5: Series CX for Oscillators, Section 11: Quartz Crystal Unit Type CX-11
IS 8271-5-12 (pdf)1990Quartz Crystal Units Used for Frequency Control and Selection, Part 5: Series CX for Oscillators, Section 12: Quartz Crystal Unit Type CX-12
IS 8271-5-13 (pdf)1990Quartz Crystal Units Used for Frequency Control and Selection, Part 5: Series CX for Oscillators, Section 13: Quartz Crystal Unit Type CX-13
IS 8271-5-14 (pdf)1990Quartz Crystal Units Used for Frequency Control and Selection, Part 5: Series CX for Oscillators, Section 14: Quartz Crystal Unit Type CX-14
IS 8271-5-15 (pdf)1990Quartz Crystal Units Used for Frequency Control and Selection, Part 5: Series CX for Oscillators, Section 15: Quartz Crystal Unit Type CX-15
IS 8271-5-16 (pdf)1990Quartz Crystal Units Used for Frequency Control and Selection, Part 5: Series CX for Oscillators, Section 16: Quartz Crystal Unit Type CX-16
IS 8271-5-17 (pdf)1990Quartz Crystal Units Used for Frequency Control and Selection, Part 5: Series CX for Oscillators, Section 17: Quartz Crystal Unit Type CX-17
IS 8271-6-1 (pdf)1986Quartz crystal units used for frequency control and selection, Part 6: Series BF for Oscillators, Section 1: Quartz crystal unit type BF-01
IS 8271-6-2 (pdf)1986Quartz crystal units used for frequency control and selection, Part 6: Series BF for Oscillators, Section 2: Quartz crystal unit type BF-02
IS 8271-6-3 (pdf)1988Quartz crystal units used for frequency control and selection, Part 6: Series BF for oscillators, Section 3: Quartz crystal unit type BF-03
IS 8271-6-4 (pdf)1988Quartz crystal units used for frequency control and selection, Part 6: Series BF for Oscillators, Section 4: Quartz crystal unit type BF-04
IS 8271-6-5 (pdf)1991Quartz crystal units used for frequency control and selection, Part 6: Series BF for Oscillators, Section 5: Quartz crystal unit type BF-05
IS 8271-6-6 (pdf)1991Quartz crystal units used for frequency control and selection, Part 6: Series BF for Oscillators, Section 6: Quartz crystal unit type BF-06
IS 8322 (pdf)
IS 8322 (txt)
1976Guide for drafting of performance specifications for cores of transformers and inductors for telecommunicationIEC Pub 367-2
IS 8426 (pdf)
IS 8426 (txt)
2001Measuring Methods for Properties of Gyromagnetic Materials Intended for Application at Microwave FrequenciesIEC 60556
IS 8454 (pdf)
IS 8454 (txt)
1977Guide for drafting of performance specifications for gyromagnetic materials for use at microwave frequenciesIEC 392
IS 8507-1 (pdf)
IS 8507-1 (txt)
1977Fixed Tantalum Capacitors with Solid Electrolyte, Part I: General Requirements and Methods of Tests
IS 8507-2-1 (pdf)
IS 8507-2-1 (txt)
1981Fixed insulated hermetically sealed tantalum capacitors with solid electrolyte, Part 2: Type FCST 1, Section 1: Polar
IS 8507-2-2 (pdf)
IS 8507-2-2 (txt)
1982Fixed insulated hermetically sealed tantalum capacitors with solid electrolyte, Part 2: Type FCST 1, Section 2: Non-polar
IS 8507-3-1 (pdf)
IS 8507-3-1 (txt)
1981Fixed insulated hermetically sealed tantalum capacitors with soild electrolyte, Part 3: Type FCST 2, Section 1: Polar
IS 8507-3-2 (pdf)
IS 8507-3-2 (txt)
1982Fixed Insulated, Hermetically Sealed Tantalum Capacitors with Sealed Electrolyte, Part 3: Type FCST 2, Section 2: Non-Polar
IS 8507-4-1 (pdf)
IS 8507-4-1 (txt)
1983Fixed Insulated Hermetically Sealed Tantalum Capacitors with Solid Electrolyte, Part 4: Type FCST 3, Section 1: Polar
IS 8644 (pdf)
IS 8644 (txt)
2001Strip-Wound Cut Cores of Grain Oriented Silicon-Iron Alloy, Used for Electronic and Telecommunication EquipmentIEC 60329
IS 8645 (pdf)1977Dimensions of magnets for energy meters
IS 8872-1 (pdf)
IS 8872-1 (txt)
1977Variable Resistors, Part I: General Requirements and Methods of Tests
IS 8872-2-1 (pdf)
IS 8872-2-1 (txt)
1979Variable Resistors, Part 2: General Purpose, Section 1: Type VRG1C
IS 8872-2-2 (pdf)
IS 8872-2-2 (txt)
1979Variable resistors, Part 2: General purpose, Section 2: Type VRG 2C
IS 8872-2-3 (pdf)
IS 8872-2-3 (txt)
1979Variable Resistors, Part II: General Purpose, Section 3: Type VRG3C
IS 8872-2-4 (pdf)
IS 8872-2-4 (txt)
1979Variable Resistors, Part 2: General Purpose, Section 4: Type VRG4P
IS 8872-2-5 (pdf)
IS 8872-2-5 (txt)
1980Variable Resistors, Part 2: General Purpose, Section 5: Type VRG 5C
IS 8872-2-6 (pdf)
IS 8872-2-6 (txt)
1980Variable Resistors, Part II: General Purpose, Section 6: Type VRG6C
IS 8872-3-1 (pdf)
IS 8872-3-1 (txt)
1979Variable Resistors, Part 3: Precision, Section 1: Type Vrp1p
IS 8872-3-2 (pdf)
IS 8872-3-2 (txt)
1979Variable Resistors, Part 3: Precision, Section 2: Type Vrp2p
IS 8872-4-1 (pdf)
IS 8872-4-1 (txt)
1980Variable Resistors, Part 4: Preset, Section 1: Type VRT 1
IS 8872-4-2 (pdf)
IS 8872-4-2 (txt)
1983Variable Resistors, Part 4: Presets, Section 2: Type Vrt 2p
IS 8872-4-3 (pdf)
IS 8872-4-3 (txt)
1982Variable Resistors, Part 4: Presets, Section 3: Type VRT 3
IS 8872-4-4 (pdf)
IS 8872-4-4 (txt)
1984Variable Resistors, Part 4: Preset, Section 4: Type VRT 4 P
IS 8872-4-5 (pdf)
IS 8872-4-5 (txt)
1984Variable Resistors, Part 4: Preset, Section 5: Type VRT 5 P
IS 8909-1 (pdf)
IS 8909-1 (txt)
1978Fixed Resistors, General Purpose, Power, Part I: General Requirements and Methods of Tests
IS 8909-2 (pdf)1978Fixed Resistors, General Purpose, Power, Part 2: Type FRP1
IS 8909-3 (pdf)1978Fixed Resistors, General Purpose, Power, Part 3: Type FRP 2
IS 8909-4 (pdf)1978Fixed resistors, general purpose, power, Part 4: Type FRP 3
IS 8909-5 (pdf)1978Fixed Resistors, General Purpose, Power, Part 5: Type Frp 4
IS 8943 (pdf)
IS 8943 (txt)
1978Guide to be design and use of components intended for mounting on boards with printed wiring and printed circuitsIEC 321
IS 9018-1 (pdf)
IS 9018-1 (txt)
2002Quartz Crystal Controlled Oscillators of Assessed Quality, Part 1: Generic SpecificationIEC 60679-1
IS 9187-1 (pdf)1979Deflection coil units used with TV picture tubes, Part 1: General requirements and tests(LTD 8)
IS 9187-2 (pdf)
IS 9187-2 (txt)
1980Deflection Coil Units Used with TV Picture Tubes, Part 2: Type DCU I S for 470 mm, 510 mm, 590 mm and 610 mm TV Picture Tubes
IS 9187-3 (pdf)
IS 9187-3 (txt)
1980Deflection Coil Units Used with TV Picture Tubes, Part 3: Type DCU 1 h for 470 mm, 510 mm, 590 mm and 610 mm TV Picture Tubes
IS 9187-4 (pdf)
IS 9187-4 (txt)
1980Deflection Coil Units Used with TV Picture Tubes, Part 4: Type DCU2S for 310 mm, and 340 mm TV Picture Tubes
IS 9187-5 (pdf)
IS 9187-5 (txt)
1998Deflection Coil Units Used with TV Picture Tubes, Part 5: Deflection Coil Units for Colour Picture Tubes
IS 9205-1 (pdf)
IS 9205-1 (txt)
1979Directly heated negative temperature co-efficient thermistors, Part 1: General requirements and methods of tests
IS 9229 (pdf)
IS 9229 (txt)
1979Inductors for Electromagnetic Interference Suppression
IS 9256-1 (pdf)
IS 9256-1 (txt)
1979Fixed Metallized Polyester Film Dielectric Capacitors, Part I: General Requirements and Methods of Tests
IS 9256-2 (pdf)1979Fixed Metallized Polyester Film Dielectric Capacitors, Part 2: Type FCPM 1
IS 9256-3 (pdf)1979Fixed Metallized Polyester Film Dielectric Capacitors, Part 3: Type FCPM 2
IS 9333 (pdf)
IS 9333 (txt)
2009Measuring Methods for Cylinder Cores, Tube Cores and Screw Cores of Magnetic OxidesIEC 60732:1982
IS 9344 (pdf)1979Dimensions of toroidal strip-wound cores of magnetically soft material
IS 9414-1-1 (pdf)1979Detail specification for digital integrated circuits, Part 1: Nand gate, TTL, Section 1: Single, 8 input, positive
IS 9414-1-2 (pdf)1979Detail specification for digital integrated circuits, Part 1: Nand gate, TTL, Section 2: Dual 4 input, positive
IS 9414-1-3 (pdf)1979Detail specification for digital integrated circuits, Part 1: Nand gate, TTL, Section 3: Triple 3 input, positive
IS 9414-1-4 (pdf)1979Detail specification for digital integrated circuits, Part 1: Nand gate, TTL, Section 4: Quad 2 input, positive
IS 9437-1 (pdf)
IS 9437-1 (txt)
1979Fixed Precision Resistors, Part I: General Requirements and Methods of Test
IS 9437-2 (pdf)1980Fixed Precision Resistors, Part 2: Type Frpr I
IS 9437-3 (pdf)1980Fixed Precision Resistors, Part 3: Type FRPR 2
IS 9437-4 (pdf)1980Fixed Precision Resistors, Part 4: Type FRPR3
IS 9470 (pdf)1979Method of test for the usability of resistors under pulse conditions
IS 9501-1 (pdf)
IS 9501-1 (txt)
1980Methods of measurements on electrical characteristics of microcircuits, Part 1: Digital micro circuits
IS 9501-2 (pdf)
IS 9501-2 (txt)
1980Methods of measurements on electrical characteristics of microcircuits, Part 2: Analogue microcircuits
IS 9512 (pdf)
IS 9512 (txt)
1980Guidance for pulse testing of resistors
IS 9593-1 (pdf)
IS 9593-1 (txt)
1980Plastic Film Dielectric Variable Tuning Capacitors Grade 2 - Part I : Tests and General Requirements
IS 9596 (pdf)
IS 9596 (txt)
1981General requirements and classification of tests for microcircuits
IS 9614-1 (pdf)1980Fixed High-Meg Resistors, Part I: Type FRHM I
IS 9614-2 (pdf)1980Fixed High-meg Resistors, Part 2: Type Frhm 2
IS 9614-3 (pdf)1980Fixed High-meg Resistors, Part 3: Type FRHM 3
IS 9638-1 (pdf)
IS 9638-1 (txt)
1980Fixed Polyester Film Dielectric Capacitors for Direct Current, Part 1: General Requirements and Methods of Tests
IS 9638-2 (pdf)
IS 9638-2 (txt)
1984Fixed Polyester Film Dielectric Capacitors for Direct Current, Part 2: Type FCPE 1
IS 9638-3 (pdf)
IS 9638-3 (txt)
1985Fixed Polyester Film Dielectric Capacitors for Direct Current, Part 3: Type FCPE 2
IS 9638-4 (pdf)
IS 9638-4 (txt)
1984Fixed polyester film dielectric capacitors for direct current, Part 4: Type FCPE 3
IS 9652 (pdf)1980Dimensions for magnetic oxide cores and associated coil formers for use in power supplies (EC-cores)
IS 9653 (pdf)1980Tolerances on dimensions of tubes, pins and rods of magnetic oxides
IS 9654 (pdf)1993Information on ferrite materials to be supplied by manufacturers of transformers and inductors cores
IS 9728 (pdf)
IS 9728 (txt)
1981Phase Method for Measurement of Motional Capacitance of Quartz Crystal UnitsIEC Pub 494-2
IS 9807 (pdf)
IS 9807 (txt)
1981Life testing of digital microcircuits
IS 9816 (pdf)
IS 9816 (txt)
1981General requirements and classification of tests for semiconductor devices
IS 9819-1 (pdf)
IS 9819-1 (txt)
1981Line Output Transformers (Eht) Used With Tv Picture Tubes, Part I: General Requirements and Tests
IS 9819-2 (pdf)
IS 9819-2 (txt)
1982Line Output Transformers (EHT) Used with TV Picture Tubes, Part 2: Type Lot 1S for 510mm, 590 mm and 610 mm TV Picture Tubes
IS 9819-3 (pdf)
IS 9819-3 (txt)
1982Line Output Transformers (EHT) Used with TV Picture Tubes, Part 3: Type Lot 1h for 470 mm, 510 mm, 590 mm and 610 mm TV Picture Tubes
IS 9819-4 (pdf)1984Line Output Transformer (EHT) Used with TV Picture Tubes, Part 4: Type Lot 2S for 310 mm and 340 mm TV Picture tubes
IS 9819-5 (pdf)
IS 9819-5 (txt)
1989Line Output Transformers (Eht) Used with Tv Picture Tubes, Part 5: Lot for Colour Picture Tubes
IS 9946 (pdf)
IS 9946 (txt)
1981Tests for magnetic properties of ferrite aerial rods
IS 10076-1 (pdf)
IS 10076-1 (txt)
1981linearity control units used with TV Picture Tubes, Part I: General Requirements and Tests
IS 10087 (pdf)
IS 10087 (txt)
1981Code of practice for handling of electrostatic sensitive devices
IS 10230-1 (pdf)
IS 10230-1 (txt)
1982IF, RF transformers and inductors (coils): Part 1 General requirements and tests (Superseding IS:1512-1969)
IS 10249-1 (pdf)
IS 10249-1 (txt)
1982Voltage Dependent Resistors (Varistors) - Part I : General Requirements and Methods of Tests
IS 10249-2-1 (pdf)
IS 10249-2-1 (txt)
1983Voltage Dependent Resistors (Varistors), Part 2: Low Voltage, Section 1: Type VDF 1
IS 10249-2-2 (pdf)
IS 10249-2-2 (txt)
1983Voltage Dependent Resistors (Varistors), Part 2: Low Voltage, Section 2: Type VDS 1
IS 10320 (pdf)
IS 10320 (txt)
1982General requirements and tests for axial lead cores made of magnetic oxides or iron powderIEC 60701
IS 10337 (pdf)
IS 10337 (txt)
198232.768 Khz Quartz Crystal Units for Wrist WatchesIEC Pub 689
IS 10370-1 (pdf)1982Dimensions of mounting accessories of pot cores for wired circuits, Part 1: For pot cores of size 26 x 16(mm)
IS 10370-2 (pdf)1982Dimensions of mounting accessories of pot cores for wired circuits, Part 2: For pot cores of size 18x11(mm)
IS 10370-3 (pdf)1982Dimensions of mounting accessories of pot cores for wired circuits, Part 3: For pot cores of size 18x14(mm)
IS 10424 (pdf)
IS 10424 (txt)
1982Guide for design and use of printed boards
IS 10477 (pdf)
IS 10477 (txt)
1982Environmental testing procedures for microcircuits
IS 10488-1 (pdf)
IS 10488-1 (txt)
1983Frame Output Transformers Used with Television Picture Tubes, Part 1: General Requirements and Tests
IS 10488-2 (pdf)1983Frame Output Transformers Used With Television Picture Tubes, Part 2: Type fot IH for 470, 510, S90 and 610 mm Television Picture Tubes
IS 10825-1 (pdf)1975ceramic dielectric capacitors type 1: Part 1 General requirements and methods of tests
IS 10825-2 (pdf)
IS 10825-2 (txt)
1984ceramic dielectric capacitors type 1: Part 2 FCCT 1
IS 10825-3 (pdf)
IS 10825-3 (txt)
1984ceramic dielectric capacitors type 1: Part 3 FCCT 2
IS 10922 (pdf)1984Copper Foil for Use in the Manufacture of Copper-clad Base MaterialIEC Pub 249-3A
IS 10991-1 (pdf)
IS 10991-1 (txt)
1984Fixed Metallized Polypropylene Film Dielectric Capacitors, Part 1: General Requirements and Methods of Tests
IS 11013 (pdf)
IS 11013 (txt)
1984Piezoelectric Ceramic Elements (Impact Type and Squeeze Type) For Gas Lighters
IS 11014-1 (pdf)
IS 11014-1 (txt)
1984Piezoelectric Ceramic Materials, Part 1: General Aspects and Methods of Measurements
IS 11014-2 (pdf)1984Piezoelectric Ceramic Materials, Part 2: Types 1 and 5
IS 11014-3 (pdf)1985Piezoelectric Ceramic Materials, Part 3: Types 4 and 8
IS 11014-4 (pdf)1989Piezoelectric Ceramic Materials, Part 4: Type 5 H
IS 11214 (pdf)
IS 11214 (txt)
1984Guide for repair of printed wiring boards and assemblies
IS 11296-1 (pdf)1986Method of Magnetic Testing of TV Ferrite Components, Part 1: Measurement of Magnetic Properties of Beam Centering Magnet
IS 11296-2 (pdf)1985Method for magnetic testing of TV ferrite components, Part 2: Flux measurement of corner correction magnet
IS 11296-3 (pdf)1985Method for magnetic testing of TV ferrite components, Part 3: Flux measurement of pin cushion correction magnet
IS 11299 (pdf)
IS 11299 (txt)
1984Guide for the selection and use of piezoelectric ceramic materials and elements
IS 11334 (pdf)
IS 11334 (txt)
1984Method of Measurement for Piezoelectric Ceramic Resonators and Resonator Units for Frequency Control and SelectionIEC Pub 642
IS 11392-1-1 (pdf)1985Dimensions of mounting accessories of pot cores for printed circuit board mountings, Part 1: For pot core of size 18X11(mm), Section 1: Type 1
IS 11392-1-2 (pdf)1988Dimensions of Mounting Accessories of Pot Cores for Printed Circuit Board Mountings, Part 1: For Pot Core of Size 18 X 11 mm, Section 2: Type 2
IS 11392-2-1 (pdf)1985Dimensions of mounting accessories of pot cores for printed circuit board mountings, Part 2: For pot core of size 26*16 mm, Section 1: Type 1
IS 11392-2-2 (pdf)1988Dimensions of Mounting accessories of pot cores for printed circuit board mountings, Part 2: For Pot Core of size 26 x 16 (mm), Section 2: Type 2
IS 11392-3-1 (pdf)1985Dimensions of mounting accessories of pot cores for printed circuit board mountings, Part 3: For pot core of size 30 * 19 (mm), Section 1: Type 1IEC Pub 740
IS 11455-1-1 (pdf)1985Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment, Part 1: Transformers, inductors using YEI-1 laminations, Section 1: Universel mountingIEC 852-1
IS 11455-1-2 (pdf)1986Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment, Part 1: Transformers, Inductors using YEI-1 Laminations, Section 2: U-clamp mountingIEC Pub 852-1
IS 11455-1-3 (pdf)1985Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment, Part 1: Transformers and inductors using YEI-1 Laminations, Section 3: Printed wiring board mountingIEC Pub 852-1
IS 11455-2 (pdf)1988Outline Dimensions of Transformers and Inductors for Use in Telecommunication and Electronic Equipment, Part 2: Transformers and Inductors Using YEx-2 Laminations for Printed Circuit Board Mounting
IS 11455-3 (pdf)
IS 11455-3 (txt)
2001Outline Dimensions of Transformers and Inductors for Use in Telecommunication and Electronic Equipment, Part 3: Transformers and Inductors Using YUI-1 LaminationsIEC 60852-3
IS 11455-4 (pdf)
IS 11455-4 (txt)
1992Outline dimensions of transformers, inductors for use in telecommunication, electronic equipment, Part 4: Transformers, inductors using Q series of C cores
IS 11514 (pdf)
IS 11514 (txt)
1985Piezoelectric Ceramic Cartridge for Impact Type Electronic Gas Lighters
IS 11515-1 (pdf)
IS 11515-1 (txt)
1985Fixed Metallized Polycarbonate Film Dielectric Capacitors, Part 1: General requirements and Methods of Tests
IS 11515-2 (pdf)
IS 11515-2 (txt)
1986Fixed Metallised Polycarbonate Film Dielectric Capacitors, Part 2: Type FCCM 1
IS 11515-3 (pdf)
IS 11515-3 (txt)
1986Fixed Metallised Polycarbonate Film Dielectric Capacitors, Part 3: Type FCCM 2
IS 11519 (pdf)
IS 11519 (txt)
1985Piezoelectric Ceramic Cartridge for Squeeze Type Electronic Gas Lighters
IS 11534-1 (pdf)
IS 11534-1 (txt)
1985directly heated positive step function temperature co-efficient thermistors, Part 1: General requirements and methods of tests
IS 11658 (pdf)
IS 11658 (txt)
1986General requirements and methods of tests of piezoelectric pressure transducers-dynamic type
IS 11794-1 (pdf)1986Laminations for Transformers and Inductors for Use in Telecommunication and Electronic Equipment, Part 1: General Requirements and TestsIEC Pub 740
IS 11794-2-1 (pdf)1986Laminations for transformers and inductors for use in telecommunication and electronic equipment, Part 2: Preferred ranges of laminations, Section 1: Lamination Type YEI-1IEC Pub 740
IS 11794-2-2 (pdf)1986Laminations for Transformers and Inductors for Use in Telecommunication and Electronic Equipment, Part 2: Preferred Ranges of Laminations, Section 2: Lamination Type YEx-2IEC Pub 740
IS 11794-2-3 (pdf)1986Laminations for Transformers and Inductors for Use in Telecommunication and Electronic Equipment, Part 2: Preferred Ranges of Laminations, Section 3: Laminations Type YED-2IEC Pub 740
IS 11794-2-4 (pdf)1986Laminations for Transformers and Inductors for Use in Telecommunication and Electronic Equipment, Part 2: Preferred Ranges of Laminations, Section 4: Lamination Type YEx-3IEC Pub 740
IS 11794-2-5 (pdf)1986Laminations for Transformers and Inductors for Use in Telecommunication and Electronic Equipment, Part 2: Preferred Ranges of Laminations, Section 5: Lamination Type YEx-4IEC Pub 740
IS 11794-2-6 (pdf)1986Laminations for Transformers and Inductors for Use in Telecommunication and Electronic Equipment, Part 2: Preferred Ranges of Laminations, Section 6: Lamination Type YUI-1IEC Pub 740
IS 11794-2-7 (pdf)1986Laminations for Transformers and Inductors for Use in Telecommunication and Electronic Equipment, Part 2: Preferred Ranges of Laminations, Section 7: Lamination Type YM-1IEC Pub 740
IS 11880 (pdf)
IS 11880 (txt)
1986Piezoelectric Ceramic Trilaminate Elements Used in Phonograph Pick-ups, Ultrasonic Transducers and Similar Devices
IS 12032-5 (pdf)
IS 12032-5 (txt)
1993Graphical symbols for diagrams in the field of electrotechnology, Part 5: Semiconductors and electron tubesIEC Pub 617-5
IS 12032-12 (pdf)
IS 12032-12 (txt)
1994Graphical symbols for diagrams in the field of electrotechnology, Part 12: Binary logic elementsIEC Pub 617-12
IS 12032-13 (pdf)
IS 12032-13 (txt)
1992Graphical Symbols for Diagrams in the Field of Electrotechnology, Part 13: Analogue ElementsIEC Pub 617-13
IS 12071 (pdf)
IS 12071 (txt)
1987Guide for assembly of printed boardsIEC 52 (U.K.)169
IS 12284 (pdf)
IS 12284 (txt)
1988Specification for prepreg for use in multilayer printed boardsIEC 249-3-1
IS 12641 (pdf)
IS 12641 (txt)
2004Semiconductor Devices - Mechanical and Climatic Test MethodsIEC 60749
IS 12825 (pdf)1989Piezoelectric ceramic elements for electronic buzzers
IS 12970-1 (pdf)
IS 12970-1 (txt)
2010Semiconductor Devices - Integrated Circuits, Part 1: GeneralIEC 60748-1
IS 12970-2-1 (pdf)
IS 12970-2-1 (txt)
1992Semiconductor devices - Integrated circuits, Part 2: Digital integrated circuits essential ratings and characteristics, Section 1: General
IS 12970-2-2 (pdf)
IS 12970-2-2 (txt)
1992Semiconductor devices - integrated circuits, Part 2: Digital integrated circuits - essential ratings and characteristics, Section 2: integrated circuits memories
IS 12970-2-3 (pdf)
IS 12970-2-3 (txt)
1993Semiconductor devices - Integrated circuits, Part 2: Digital integrated circuits - Essential ratings and characteristics, Section 3: Integrated circuit microprocessos
IS 12970-3-1 (pdf)
IS 12970-3-1 (txt)
1992Semiconductor devices - Integrated circuits, Part 3: Digital integrated circuits - Measuring methods, Section 1: General
IS 12970-3-2 (pdf)
IS 12970-3-2 (txt)
1992Semiconductor devices - Integrated circuits, Part 3: Digital integrated circuits - Measuring methods, Section 2: Static characteristics
IS 12970-3-3 (pdf)
IS 12970-3-3 (txt)
1993Semiconductor devices - Integrated circuits, Part 3: Digital integrated circuits - Measuring methods, Section 3: Dynamic measurements
IS 12970-5-1 (pdf)
IS 12970-5-1 (txt)
1991Semiconductor devices - Integrated circuits, Part 5: Analogue integrated circuits - Essential ratings and characteristics, Section 1: General Format
IS 12970-5-2 (pdf)
IS 12970-5-2 (txt)
1992Semiconductor devices - Integrated circuits, Part 5: Analogue integrated circuits - Essential ratings and characteristics, Section 2: Operational amplifiers
IS 12970-5-3 (pdf)
IS 12970-5-3 (txt)
1992Semiconductor Devices - Integrated Circuits, Part 5: Analogue Integrated Circuits - Essential Ratings and Characteristics, Section 3: Audio Amplifiers, Video Amplifiers and Multichannel Amplifiers for Telecommunications
IS 12970-5-4 (pdf)
IS 12970-5-4 (txt)
1992Semiconductor devices - Integrated circuits, Part 5: Analogue integrated circuits - Essential ratings and characteristics, Section 4: R.F. and I.F. amplifiers
IS 12970-5-5 (pdf)
IS 12970-5-5 (txt)
1993Semiconductor Devices - Integrated Circuits, Part 5: Analogue Integrated Circuits - Essential Ratings and Characteristics, Section 5: Voltage and Current Regulators
IS 12970-5-6 (pdf)
IS 12970-5-6 (txt)
1993Semiconductor devices - Integrated circuits, Part 5: Analogue integrated circuits - Essential ratings and characteristics, Section 6: Analogue signal switching circuits
IS 12970-6-1 (pdf)
IS 12970-6-1 (txt)
1992Semiconductor devices - Integrated circuits, Part 6: Analogue integrated circuits - Measuring method, Section 1: General
IS 12970-6-2 (pdf)
IS 12970-6-2 (txt)
1992Semiconductor devices - Integrated circuits, Part 6: Analogue integrated circuits - Measuring method, Section 2: Linear amplifiers
IS 12970-6-3 (pdf)
IS 12970-6-3 (txt)
1992Semiconductor Devices - Integrated Circuits, Part 6: Analogue Integrated Circuits Measuring Methods, Section 3: Voltage Regulators
IS 12970-6-4 (pdf)
IS 12970-6-4 (txt)
1992Semiconductor devices - Integrated circuits, Part 6: Analogue integrated circuits - Measuring methods, Section 4: Analogue switching circuits
IS 13310 (pdf)
IS 13310 (txt)
1992Dimensions of E-cores with rectangular cross-section made of magnetic oxides intended for general applications
IS 13342 (pdf)2001Magnetic Oxide Cores (ETD - Cores) Intended for use in Power Supply Applications - DimensionsISO 1185
IS 13388-1 (pdf)1992Performance Requirements and Methods of Tests of TV Ferrite Components, Part 1: U Core for Line Output Transformers
IS 13388-2 (pdf)1992Performance Requirements and Methods of Tests of TV Ferrite Components, Part 2: U Core for Line Driver Transformers
IS 13388-3 (pdf)1992Performance requirements and methods of test of TV ferrite components, Part 3: Core for deflection coil
IS 13412-1 (pdf)1992Laminated core, package for transformers and inductors used in telecommunication and electronic equipment, Part 1: Dimensions
IS 13412-2 (pdf)
IS 13412-2 (txt)
1998Laminated Core Packages for Transformers and Inductors Used in Telecommunication and Electronic Equipment, Part 2: Electrical CharacteristicsIEC 1021-2
IS 13413-1 (pdf)1992Designation for cores and assemblies for transformers and inductors for used in telecommunication and electronic equipment, Part 1: Laminated cores
IS 13504 (pdf)
IS 13504 (txt)
1992Method of measurement of non-linearity in resistorsIEC Pub 440
IS 13554 (pdf)1992Measurement of the dimensions of a cylindrical component having two axial terminationsIEC Pub 294
IS 13562 (pdf)
IS 13562 (txt)
1992Terminology related to microprocessors
IS 13669 (pdf)
IS 13669 (txt)
1993Permanent polymer coating materials (solder-resist) for use in the manufacture of printed circuitsIEC 249-3-3
IS 13674-1 (pdf)1998Dimensions of ferrite components for CTV, Part 1: Cores for deflection coil
IS 13674-2 (pdf)1993Dimensions of Ferrite Components for CTV, Part 2: Cores for Line Output Transformers
IS 13674-3 (pdf)1993Dimensions of ferrite components for CTV, Part 3: Cores for SMPS transformers
IS 13898 (pdf)
IS 13898 (txt)
1993Dimensions of Coil Formers of Transformers, Inductors for use in Telecommunication and electronic equipment
IS 13909 (pdf)1993Dimensions for PM Cores made of magnetic oxides and associated Parts
IS 14498 (pdf)1998Dimensions of EP cores made of magnetic oxides and associated partsIEC 61596
IS 14870 (pdf)
IS 14870 (txt)
2000Transformers and Inductors for Use in Electronic and Telecommunication Equipment - Measuring Methods and Test ProceduresIEC 1007
IS 14901-1 (pdf)
IS 14901-1 (txt)
2010Semiconductor Devices - Discrete Devices and Integrated Circuits, Part 1: GeneralIEC 60747-1
IS 14901-2 (pdf)
IS 14901-2 (txt)
2001Semiconductor Devices - Discrete Devices and Integrated Circuits, Part 2: Rectifier DiodesIEC 60747-2
IS 14901-3 (pdf)
IS 14901-3 (txt)
2001Semiconductor Devices - Discrete Devices and Integrated Circuits, Part 3: Signal (Including Switching) and Regulator DiodesIEC 60747-3
IS 14901-4 (pdf)
IS 14901-4 (txt)
2004Semiconductor Devices - Discrete Devices and Integrated Circuits, Part 4: Microwave DevicesIEC 60747-4
IS 14901-5-1 (pdf)
IS 14901-5-1 (txt)
2010Semiconductor Devices - Discrete Devices and Integrated Circuits, Part 5: Optoelectronic Devices, Section 1: GeneralIEC 60747-5-1
IS 14901-5 (pdf)
IS 14901-5 (txt)
2004Semiconductor Devices - Discrete Devices and Integrated Circuits, Part 5: Optoelectronic DevicesIEC 60747-5
IS 14901-7 (pdf)
IS 14901-7 (txt)
2010Semiconductor Devices - Discrete Devices and Integrated Circuits, Part 7: Bipolar TransistorsIEC 60747-7
IS 14901-8 (pdf)
IS 14901-8 (txt)
2001Semiconductor Devices - Discrete Devices and Integrated Circuits, Part 8: Field-effect TransistorsIEC 60747-8
IS 14924 (pdf)
IS 14924 (txt)
2001Synthetic Quartz Crystal s and Guide to the UseIEC 758
IS 15204 (pdf)
IS 15204 (txt)
2002Microwave Ferrite Components - Measuring Methods for Major PropertiesIEC 61830
IS 15212 (pdf)
IS 15212 (txt)
2002Specification and Characterization Methods for Nonwoven 'E' Glass MatIEC/PAS 62212
IS 15213 (pdf)
IS 15213 (txt)
2002Specification and Characterization Methods for Nonwoven Para-Aramid ReinforcementIEC/PAS 62213
IS 15214 (pdf)
IS 15214 (txt)
2002Generic Requirements for Implementation of Product Manufacturing Description Data and Transfer MethodologyIEC/PAS 62119
IS 15215 (pdf)
IS 15215 (txt)
2002Performance Guide Manual for Single- and Double-Sided Flexible Printed Wiring BoardsIEC/PAS 62123
IS 15252 (pdf)
IS 15252 (txt)
2002Generic Performance Printed BoardsIEC/PAS 62214
IS 15479 (pdf)
IS 15479 (txt)
2004Qualification and Performance High Density Interconnect (HDI) Layers or BoardsIEC/PAS 62293
IS 15544 (pdf)
IS 15544 (txt)
2004Guide to the measurement of equivalent electrical parameters of ph quartz crystal unitsIEC 6180
IS 15866-1 (pdf)
IS 15866-1 (txt)
2010FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION, PART 1: GENERIC SPECIFICATIONIEC60938-1:2006
IS 15867-1 (pdf)2010Ferrite Cores Guide on the Limits of Surface IrregularitiesIEC 60424-1
IS/IEC 60862-2 (pdf)
IS/IEC 60862-2 (txt)
2002Surface Acoustic Wave (SAW) Filters of Assessed Quality, Part 2: Guidance on useIEC 60862-2:2002
IS/IEC 60862-3 (pdf)
IS/IEC 60862-3 (txt)
2003Surface Acoustic Wave (SAW) Filters of Assessed Quality, Part 3: Standard OutlinesIEC 60862-3:2003
IS/QC 001001 (pdf)
IS/QC 001001 (txt)
2000IEC Quality Assessment System for Electronic Components (IECQ) - Basic Rules
IS/QC 001002-1 (pdf)
IS/QC 001002-1 (txt)
2000IEC Quality Assessment System for Electronic Components (IECQ) - Rules of Procedure, Part 1: Administration
IS/QC 001002-2 (pdf)
IS/QC 001002-2 (txt)
2000IEC Quality Assessment System for Electronic Components (IECQ) - Rules of Procedure, Part 2: Documentation
IS/QC 001002-3 (pdf)
IS/QC 001002-3 (txt)
2000IEC Quality Assessment System for Electronic Components (IECQ) - Rules of Procedure, Part 3: Approval Procedures
IS/QC 001003 (pdf)
IS/QC 001003 (txt)
2000IEC Quality Assessment System for Electronic Components (IECQ) - Guidance Documents
IS/QC 250000 (pdf)
IS/QC 250000 (txt)
1988Inductor and Transformer Cores for Telecommunications - Generic Specification
IS/QC 250100 (pdf)
IS/QC 250100 (txt)
1988Inductor and Transformer Cores for Telecommunications Sectional Specification: Magnetic Oxide Cores for Inductor Applications
IS/QC 250101 (pdf)
IS/QC 250101 (txt)
1988Inductor and Transformer Cores for Telecommunications - Blank Detail Specification : Magnetic Oxide Cores for Inductor Applications Assessment Level A
IS/QC 250200 (pdf)
IS/QC 250200 (txt)
1988Inductor and Transformer Cores for Telecommunications Sectional Specification : Magnetic Oxide Cores for Broad - Band Transformers
IS/QC 250201 (pdf)
IS/QC 250201 (txt)
1988Inductor and Transformer Cores for Telecommunications Blank Detail Specification : Magnetic Oxide Cores for Broad-Band Transformers Assessment Levels A and B
IS/QC 250300 (pdf)
IS/QC 250300 (txt)
1988Inductor and Transformer Cores for Telecommunications
IS/QC 250301 (pdf)
IS/QC 250301 (txt)
1988Inductor and Transformer Cores for Telecommunications Blank Detail Specification : Magnetic Oxide Cores for Transformers and Chokes for Power Applications Assessment Level A
IS/QC 260000 (pdf)
IS/QC 260000 (txt)
2000Transformers and Inductors for Use in Electronic and Telecommunication Equipment, Part 1: Generic Specification
IS/QC 260100 (pdf)
IS/QC 260100 (txt)
1998Transformers and Inductors for Use in Electronic and Telecommunication Equipment, Part 2: Sectional Signal Transformers on the Basis of Capability Approval Procedure
IS/QC 260200 (pdf)
IS/QC 260200 (txt)
1999Transformers and Inductors for Use in Electronic and Telecommunication Equipment, Part 3: Sectional Power Transformers on the Basis of Capability Approval Procedure
IS/QC 260300 (pdf)
IS/QC 260300 (txt)
2000Transformers and Inductors for Use in Electronic and Telecommunication Equipment, Part 4: Sectional Power Transformers for Switched Mode Power Supplies (SMPS) on the Basis of Capability Approval Procedure
IS/QC 260400 (pdf)
IS/QC 260400 (txt)
2000Transformers and Inductors for Use in Electronic and Telecommunication Equipment, Part 5: Sectional Pulse Transformers on the Basis of Capability Approval Procedure
IS/QC 260500 (pdf)
IS/QC 260500 (txt)
2000Transformers and Inductors for Use in Electronic and Telecommunication Equipment, Part 6: Sectional Inductors on the Basis of Capability Approval Procedure
IS/QC 300000 (pdf)
IS/QC 300000 (txt)
1988Fixed Capacitors for Use in Electronic Equipment Generic Specification
IS/QC 300100 (pdf)
IS/QC 300100 (txt)
1988Fixed Capacitors for Use in Electronic Equipment Sectional Specification: Fixed Polyethylene-Terephthalate Film Dielectric Metal Foil DC Capacitors
IS/QC 300200 (pdf)
IS/QC 300200 (txt)
2000Fixed Capacitors for Use in Electronic Equipment, Part 15: Sectional Specification: Fixed Tantalum Capacitors with Non-Solid or Solid Electrolyte
IS/QC 300201 (pdf)
IS/QC 300201 (txt)
2000Fixed capacitors for use in electronic equipment, Part 15: Blank detail specification : Fixed tantalum capacitors with solid electrolyte and porous anode assessment level E
IS/QC 300300 (pdf)
IS/QC 300300 (txt)
1992Fixed Capacitors for Use in Electronic Equipment Sectional Specification : Aluminium Electrolytic Capacitors with Solid and Non-Solid Electrol
IS/QC 300301 (pdf)
IS/QC 300301 (txt)
1993Fixed Capacitors for Use in Electronic Equipment Blank Detail Specification: Aluminium Electrolytic Capacitors with Non-Solid Electrolyte Assessment Level E
IS/QC 300400 (pdf)
IS/QC 300400 (txt)
1988Fixed Capacitors for Use in Electronic Equipment - Sectional Specification : Fixed Metallized Polyethylene-Terephthalate Film Dielectric DC Capacitors
IS/QC 300401 (pdf)
IS/QC 300401 (txt)
1988Fixed Capacitors for Use in Electronic Equipment - Blank Detail Specification : Fixed Metallized Polyethylene-Terephthalate Film Dielectric D C Capacitors Assessment Level E
IS/QC 300600 (pdf)
IS/QC 300600 (txt)
1993Fixed Capacitors for Use in Electronic Equipment - Sectional Fixed Capacitors of Ceramic Dielectric, Class 1
IS/QC 300601 (pdf)
IS/QC 300601 (txt)
1993Fixed Capacitors for Use in Electronic Equipment, Blank Detail Fixed Capacitors of Ceramic Dielectric, Class 1, Assessment Level E
IS/QC 300700 (pdf)
IS/QC 300700 (txt)
1994Fixed Capacitors for Use in Electronic Equipment Sectional Fixed Capacitors of Ceramic Dielectric, Class 2
IS/QC 300701 (pdf)
IS/QC 300701 (txt)
1993Fixed Capacitors for Use in Electronic Equipment Sectional Fixed Capacitors of Ceramic Dielectric, Class 2
IS/QC 300800 (pdf)
IS/QC 300800 (txt)
1994Fixed Capacitors for Use in Electronic Equipment Sectional Fixed Tantalum Chip Capacitors
IS/QC 300801 (pdf)
IS/QC 300801 (txt)
1993Fixed Capacitors for Use in Electronic Equipment Blank Detail Fixed Tantalum Chip Capacitors Assessment Level E
IS/QC 301200 (pdf)
IS/QC 301200 (txt)
1993Fixed Capacitors for Use in Electronic Equipment, Sectional Fixed Metallized Polypropylene Film Dielectric D. C. Capacitors
IS/QC 301201 (pdf)
IS/QC 301201 (txt)
1993Fixed Capacitors for Use in Electronic Equipment - Blank Detail Fixed Metallized Polypropylene Film Dielectric D. C. Capacitors - Assessment Level E
IS/QC 301301 (pdf)
IS/QC 301301 (txt)
1993Fixed Capacitors for Use in Electronic Equipment, Blank Detail Fixed Metallized Polypropylene Film Dielectric A. C. and Pulse Capacitors, Assessment Level E
IS/QC 301800 (pdf)
IS/QC 301800 (txt)
2001Fixed Capacitors for Use in Electronic Equipment, Part 13: Sectional Specification: Fixed Polypropylene Film Dielectric Metal Foil d.c. Capacitors
IS/QC 301801 (pdf)
IS/QC 301801 (txt)
2001Fixed Capacitors for Use in Electronic Equipment, Part 13: Blank Detail Specification: Fixed Polypropylene Film Dielectric Metal Foil d.c. Capacitors Assessment Level E
IS/QC 302400 (pdf)
IS/QC 302400 (txt)
1994Fixed Capacitors for Use in Electronic Equipment Sectional Fixed Capacitors for Electromagnetic Interference Suppression and Connection to the Supply Mains
IS/QC 302401 (pdf)
IS/QC 302401 (txt)
1994Fixed Capacitors for Use in Electronic Equipment Blank Detail Fixed Capacitors for Electromagnetic Interference Suppression and Connection to the Supply Mains Assessment Level D
IS/QC 390000 (pdf)
IS/QC 390000 (txt)
1994Fixed Film Resistor Networks for Use in Electronic Equipment - Generic Specification
IS/QC 390100 (pdf)
IS/QC 390100 (txt)
1993Fixed Film Resistor Networks for Use in Electronic Equipment - Sectional Film Resistor Networks of Assessed Quality on the Basis of the Capability Approval Procedure
IS/QC 390101 (pdf)
IS/QC 390101 (txt)
1993Fixed Film Resistor Networks for Use in Electronic Equipment Blank Detail Film Resistor Networks of Assessed Quality on the Basis of the Capability Approval Procedure - Assessment Level E
IS/QC 400000 (pdf)
IS/QC 400000 (txt)
1988Fixed Resistors for Use in Electronic Equipment Generic Specification
IS/QC 400100 (pdf)
IS/QC 400100 (txt)
1988Fixed Resistors for Use in Electronic Equipment Sectional Specification : Fixed Low-Power Non-Wirewound Resistors
IS/QC 400101 (pdf)
IS/QC 400101 (txt)
1988Fixed Resistors For Use in Electronic Equipment Blank Detail Specification: Fixed Low-Power Non-wirewound Resistors Assessment Level E
IS/QC 400200 (pdf)
IS/QC 400200 (txt)
1992Fixed Resistors for Use in Electronic Equipment Sectional Specification : Fixed Power Resistors
IS/QC 400300 (pdf)
IS/QC 400300 (txt)
1992Fixed Resistors for Use in Electronic Equipment Sectional Specification : Fixed Precision Resistors
IS/QC 400301 (pdf)
IS/QC 400301 (txt)
1992Fixed Resistors for Use in Electronic Equipment - Blank Detail Specification : Fixed Precision Resistors Assessment Level E
IS/QC 400400 (pdf)
IS/QC 400400 (txt)
1994Fixed Resistors for Use in Electronic Equipment - Sectional Fixed Resistor Networks With Individually Measurable Resistors
IS/QC 400401 (pdf)
IS/QC 400401 (txt)
1994Fixed Resistors for Use in Electronic Equipment - Blank Detail Specification - Fixed Resistor Networks with Individually Measurable Resistors, all of Equal Value and Equal Dissipation - Assessment Level E
IS/QC 400402 (pdf)
IS/QC 400402 (txt)
1993Fixed Resistors for Use in Electronic Equipment - Blank Detail Specification - Fixed Resistor Networks with Individually Measurable Resistors of Either Different Resistance Values or Different Rated Dissipations - Assessment Level E
IS/QC 400500 (pdf)
IS/QC 400500 (txt)
1993Fixed Resistors for Use in Electronic Equipment - Sectional Fixed Resistor Networks in which not all Resistors are Individually Measurable
IS/QC 400501 (pdf)
IS/QC 400501 (txt)
1994Fixed Resistors for Use in Electronic Equipment - Blank Detail Fixed Resistors Networks in which not All Resistors are Individually Measurable - Assessment Level E
IS/QC 400600 (pdf)
IS/QC 400600 (txt)
1994Fixed Resistors for Use in Electronic Equipment Sectional Fixed Chip Resistors
IS/QC 400601 (pdf)
IS/QC 400601 (txt)
1993Fixed Resistors for Use in Electronic Equipment Blank Detail fixed chip resistors assessment level E
IS/QC 410000 (pdf)
IS/QC 410000 (txt)
2000Potentiometers for Use in Electronic Equipment, Part 1: Generic Specification
IS/QC 410100 (pdf)
IS/QC 410100 (txt)
1992Potentiometers for Use in Electronic Equipment - Sectional Specification : Lead-Screw Actuated and Rotary Preset Potentiometers
IS/QC 410101 (pdf)
IS/QC 410101 (txt)
1992Potentiometers for Use in Electronic Equipment Blank Detail Specification: Lead-Screw Actuated and Rotary Preset Potentiometers Assessment Level E
IS/QC 420000 (pdf)
IS/QC 420000 (txt)
1994Varistors for Use in Electronic Equipment - Generic Specification
IS/QC 420100 (pdf)
IS/QC 420100 (txt)
1994Varistors for Use in Electronic Equipment - Sectional Surge Suppression Varistors
IS/QC 420101 (pdf)
IS/QC 420101 (txt)
1994Varistors for Use in Electronic Equipment - Blank Detail Silicon Carbide Surge Suppression Varistors Assessment Level E
IS/QC 420102 (pdf)
IS/QC 420102 (txt)
1993Varistors for Use in Electronic Equipment - Blank Detail Zinc Oxide Surge Suppression Varistors - Assessment Level E
IS/QC 440000 (pdf)
IS/QC 440000 (txt)
1994Directly Heated Positive Step - Function Temperature Coefficient Thermistors - Generic Specification
IS/QC 440001 (pdf)
IS/QC 440001 (txt)
1993Directly Heated Positive Step Function Temperature Coefficient Thermistors - Blank Detail Specification - Assessment Level E
IS/QC 680000 (pdf)
IS/QC 680000 (txt)
1995Quartz Crystal Units - A Specification in the IEC Quality Assessment System for Electronic Components (IECQ) - Generic Specification
IS/QC 680100 (pdf)
IS/QC 680100 (txt)
1995Quartz Crystal Units - A Specification in the IEC quality Assessment System for Electronic Components (IECQ) - Sectional Specification - Capability Approval
IS/QC 680101 (pdf)1995Quartz Crystal Units - A Specification in the IEC Quality Assessment System for Electronic Components (IECQ) - Blank Detail Specification - Capability Approval
IS/QC 720100-12 (pdf)
IS/QC 720100-12 (txt)
2001Semiconductor Devices, Part 12: Sectional Optoelectronic Devices
IS/QC 750102 (pdf)
IS/QC 750102 (txt)
1989Semiconductor Devices - Discrete Devices - Bipolar Transistors Blank Detail Ambient-Rated Bipolar Transistors for Low and High-Frequency Amplification
IS/QC 750104 (pdf)
IS/QC 750104 (txt)
1993Semiconductor Devices - Discrete Devices - Bipolar Transistors - Blank Detail Bipolar Transistors for Switching Applications
IS/QC 750105 (pdf)
IS/QC 750105 (txt)
1994Semiconductor Devices - Discrete Devices - Signal (Including Switching) and Regulator Diodes -Blank Detail Voltage-Regulator Diodes and Voltage-Reference Diodes, Excluding Temperature-Compensated Precision Reference Diodes
IS/QC 750107 (pdf)1994Semiconductor Devices - Discrete Devices - Bipolar Transistors - Blank Detail Case- Rated Bipolar Transistors for High-Frequency Amplification
IS/QC 750108 (pdf)
IS/QC 750108 (txt)
1992Semiconductor Devices - Discrete Devices Rectifier Diodes Blank Detail Rectifier Diodes ( Including Avalanche Rectier Diodes ), Ambient and Case-Rated, Up to 100 A
IS/QC 750111 (pdf)
IS/QC 750111 (txt)
1994Semiconductor Devices - Discrete Devices, Part 6: Thyristors, Section 2: Blank Detail Bidirectional Triode Thyristors (Triacs), Ambient or Case-Rated, Up To 100 A
IS/QC 760000 (pdf)
IS/QC 760000 (txt)
1994Semiconductor Devices - Integrated Circuits - Generic Film Integrated Circuits and Hybrid Film Integrated Circuits
IS/QC 760100 (pdf)
IS/QC 760100 (txt)
1995Semiconductor Devices-Integrated Circuits Sectional Specification for film integrated Circuits and Hybrid Film Integrated Circuits on The Basis Of Qualification approval Procedure
IS/QC 760101 (pdf)
IS/QC 760101 (txt)
1995Semiconductor Devices - Integrated Circuits - Blank Detail Film Integrated Circuits and Hybrid Film Integrated Circuits on the Basis of Qualification Approval Procedure
IS/QC 760200 (pdf)
IS/QC 760200 (txt)
1995Semiconductor Devices - Integrated Circuits - Sectional Film Integrated Circuits and Hybrid Film Integrated Circuits on the Basis of the Capability Approval Procedures
IS/QC 760201 (pdf)
IS/QC 760201 (txt)
1995Semiconductor Devices - Integrated Circuits - Blank Detail Film Integrated Circuits and Hybrid Film Integrated Circuits on the Basis of the Capability Approval Procedures
IS/QC 790130 (pdf)
IS/QC 790130 (txt)
1995Semiconductor Devices - Integrated Circuits - Digital Integrated Circuits - Blank Detail HCMOS Digital Integrated Circuits (Series 54/74 HC, 54/74 HCT, 54/74 HCU)
IS/QC 790131 (pdf)
IS/QC 790131 (txt)
1995Semiconductor Devices - Integrated Circuits - Digital Integrated Circuits - Blank Detail Complementary MOS Digital Integrated Circuits (Series 4000 Band 4000 UB)
IS/QC 790132 (pdf)
IS/QC 790132 (txt)
1995Semiconductor Devices - Integrated Circuits - Digital Integrated Circuits - Blank Detail Bipolar Monolithic Digital Integrated Circuit Gates (Excluding Uncommitted Logic Arrays)
IS/QC 790202 (pdf)
IS/QC 790202 (txt)
1993Semiconductor Devices - Integrated Circuits - Analogue Integrated Circuits - Blank Detail Monolithic Integrated Operational Amplifiers

Last Updated: September 6, 2013