Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.
Division Name: Electronics and Information Technology
Section Name: Electromechanical COmponents and Mechnical Structures for Electronic Equipment (LITD 3)
Standard | Year | Title | IBR |
---|---|---|---|
IS 1885-40 (pdf) IS 1885-40 (txt) | 1974 | Electrotechnical vocabulary, Part 40: Connectors | |
IS 1885-67 (pdf) | 1988 | Electrotechnical vocabulary, Part 67: Mechanical structures for electronic equipment | |
IS 2628-1 (pdf) | 1964 | Rotary Wafer Switches (Low Current Rating) - Part I : Tests and General Requirements | |
IS 2628-2 (pdf) IS 2628-2 (txt) | 1967 | Rotary wafer switches (Low current rating): Part 2 Rotary wafer switches with central mounting | |
IS 2926 (pdf) | 1964 | Dimensions of connectors for radio batteries | |
IS 3452-1 (pdf) IS 3452-1 (txt) | 1966 | Toggle Switches, Part I: General Requirements and Tests | |
IS 3452-2 (pdf) | 1970 | Toggle Switches, Part 2: Toggle Switches, Type I and type II | |
IS 3544 (pdf) IS 3544 (txt) | 1966 | General Requirements and Tests for Tag Strips | |
IS 3720 (pdf) | 1983 | Dimensions of Plugs for Hearing Aids | IEC 60090 |
IS 3826-2 (pdf) IS 3826-2 (txt) | 1970 | Connectors for Frequencies below 3 Mhz, Part 2: Battery Connectors for Electronic Equipment | IEC 60130-3 |
IS 4007-1 (pdf) IS 4007-1 (txt) | 1982 | Terminals for Electronic Equipment, Part I: General Requirements and Tests | |
IS 4007-2-1 (pdf) | 1983 | Terminals for Electronic Equipment, Part 2: Detail Terminals, Section 1: Terminal, Insulated, with Insulated Captive Screw Cap, Type TSC 1 | |
IS 4007-2-2 (pdf) | 1983 | Terminals for electronic equipment, Part 2: Details specification for terminals, Section 2: Terminal non-insulated, with insulated captive screw cap, type TSC 2 | |
IS 4007-2-3 (pdf) | 1983 | Terminals for Electronic Equipment, Part 2: Detail Terminals, Section 3: Terminal, Non-insulated, with Insulated Captive Screw cap, Type TSC 3 | |
IS 4007-2-4 (pdf) | 1983 | Terminals for Electronic Equipment, Part 2: Detail Terminals, Section 4: Terminal, Insulated, with Insulated Captive Screw Cap, Type TSC 4 | |
IS 4007-2-5 (pdf) | 1983 | Terminals for Electronic Equipment, Part 2: Detail Terminals, Section 5: Terminals, Insulated, Side Slotted With Insulated Captive Screw Cap; Type TSC 5 | |
IS 4007-2-6 (pdf) | 1983 | Terminals for Electronic Equipment, Part 2: Detail Terminals, Section 6: Terminal, Non-Insulated, with Insulated Captive Spring Cap, Tapped Hole Panel Mounting, Type TSL 1 | |
IS 4007-2-7 (pdf) | 1983 | Terminals for Electronic Equipment, Part 2: Detail Terminals, Section 7: Terminal, Non-Insulated, with Insulated Captive Spring Cap, Type TSL 2 | |
IS 4007-2-8 (pdf) | 1983 | Terminals for Electronic Equipment, Part 2: Detail Terminals, Section 8: Terminal, Insulated, with Insulated Captive Spring Cap, Type TSL 3 | |
IS 4007-2-9 (pdf) | 1983 | Terminals for Electronic Equipment, Part 2: Detail Terminals, Section 9: Terminal, Insulated, with Insulated Captive Spring Cap, Type TSL 4 | |
IS 4007-2-10 (pdf) | 1983 | Terminals for electronic equipment, Part 2: Details specification for terminals, Section 10: Terminal insulated, with insulated captive spring cap, type TSL 5 | JSS 52710 |
IS 4586-1-1 (pdf) | 1987 | Dimensions of Spindles and Mounting Arrangements for Spindle Operated Electronic Components, Part 1: Spindles, Section 1: General and Definitions | |
IS 4586-1-2 (pdf) | 1987 | Dimensions of Spindles and Mounting Arrangements for Spindle Operated Electronic Components, Part 1: Spindle, Section 2: Plain Round Spindle | |
IS 4586-1-3 (pdf) | 1987 | Dimensions of Spindles and Mounting Arrangements for Spindle Operated Electronic Components, Part 1: Spindles, Section 3: Flatted Spindles | |
IS 4586-1-4 (pdf) | 1987 | Dimensions of Spindles and Mounting Arrangements for Spindle Operated Electronic Components, Part 1: Spindles, Section 4: Slotted Spindles | |
IS 4586-1-5 (pdf) | 1987 | Dimensions of Spindles and Mounting Arrangements for Spindle Operated Electronic Components, Part 1: Spindles, Section 5: Hollow Spindles | |
IS 4586-1-6 (pdf) | 1987 | Dimensions of Spindles and Mounting Arrangements for Spindle Operated Electronic Components, Part 1: Spindles, Section 6: Coupling Spindle | |
IS 4586-1-7 (pdf) | 1987 | Dimensions of spindles and mounting arrangements for spindle operated electronic components, Part 1: Spindles, Section 7: Concentric spindle | |
IS 4586-1-8 (pdf) | 1987 | Dimensions of spindles and mounting arrangements for spindle operated electronic components, Part 1: Spindles, Section 8: Double flatted spindle | |
IS 4586-1-9 (pdf) | 1987 | Dimensions of spindles and mounting arrangements for spindle operated electronic components, Part 1: Spindles, Section 9: Knurled spindle | |
IS 4586-1-10 (pdf) | 1978 | Dimensions of Spindles and Mounting Arrangements for Spindle Operated Electronic Components, Part 1: Spindles, Section 10: Slotted and Knurled Spindle | |
IS 4586-2-1 (pdf) | 1980 | Dimensions of spindles and mounting arrangements for spindle operated electronic components, Part 2: Mounting arrangements, Section 1: Components and panels cut-outs | |
IS 4586-2-2 (pdf) | 1980 | Dimensions of spindle and mounting arrangements for spindle operated electronic components, Part 2: Mounting arrangements, Section 2: Fixing nuts | |
IS 4794-1 (pdf) | 1968 | Push-button switches, Part 1: General requirements and tests | |
IS 4794-2 (pdf) | 1986 | Push button switches, Part 2: Push button switches, Type 1 | |
IS 4795-1 (pdf) IS 4795-1 (txt) | 2009 | Holders for Indicator Lamps for Electronic and Telecommunication Equipment, Part I: General Requirements and Tests | |
IS 4795-2 (pdf) IS 4795-2 (txt) | 1978 | Holders for Indicator Lamps for Electronic and Telecommunication Equipment, Part 2: Type E10, E14 and BA9 | |
IS 5033 (pdf) | 1969 | Telescopic Aerials for Portable Radio Receivers | |
IS 5051-1 (pdf) IS 5051-1 (txt) | 1982 | Relays for Electronics and Telecommunication Equipment, Part I: General Requirements and Tests | |
IS 5051-2-1 to 3 (pdf) IS 5051-2-1 to 3 (txt) | 1982 | Relays for Electronics and Telecommunication Equipment - Part 2, Sections 1-3 : Reed Relays | |
IS 5051-3-1 (pdf) IS 5051-3-1 (txt) | 1985 | Relays for electronic and telecommunication equipment : Part 3 - Armature relays, nonsealed, Section 1: Type RA 1 | |
IS 5054-1-1 (pdf) IS 5054-1-1 (txt) | 1995 | Radio frequency connectors, Part 1: General requirements and measuring methods, Section 1: General | IEC 169-1-1 |
IS 5054-1-2 (pdf) IS 5054-1-2 (txt) | 1995 | Radio frequency connectors:Pt 1 General requirements and measuring methods, Section 2: Electrical tests and measuring procedures: Reflection factor | IEC 169-1-1 |
IS 5054-1-3 (pdf) IS 5054-1-3 (txt) | 1995 | Radio frequency connectors, Part 1: General requirements and measuring methods, Section 3: Electrical tests and measuring procedures : Screening effectiveness | IEC 169-1-3 |
IS 5054-2 (pdf) IS 5054-2 (txt) | 2007 | Radio frequency connectors, Part 2: Coaxial unmatched connector | IEC 60169-2 |
IS 5054-8 (pdf) IS 5054-8 (txt) | 2013 | Radio frequency connectors, Part 8: Sectional Specification - RF Coaxial Connectors with Inner Diameter of Outder Conductor 6.5mm (0.256 in) with Bayonet Lock - Characteristic Impedance 50 Ohm (Type BNC) | IEC 61169-8:2007 |
IS 5054-24 (pdf) | 2007 | Radio Frequency Connectors, Part 24: Radio Frequency Coaxial Connectors with Screw Coupling, Typically for Use in 75 OHM Cable Distribution Systems (TYPE F) | |
IS 6089-1 (pdf) IS 6089-1 (txt) | 1971 | Sensitive Switches, Part I: General Requirements and Tests | |
IS 6089-2 (pdf) IS 6089-2 (txt) | 1985 | Sensitive Switches, Part 2: SPDT Unsealed, Type 1 | |
IS 6102-1 (pdf) IS 6102-1 (txt) | 2009 | Finger Knobs used in Electronic and Telecommunication Equipment, Part I: General Requirements and Tests | |
IS 7751-1 (pdf) IS 7751-1 (txt) | 1975 | Slide Switches, Part I: General Requirements and Tests | |
IS 7751-2 (pdf) IS 7751-2 (txt) | 1985 | Slide Switches, Part 2: Slide Switches, Type 1 | |
IS 8161-6 (pdf) IS 8161-6 (txt) | 1983 | Guide for Equipment Reliability Testing, Part VI: Tests for Validity of a Constant Failure Rate Assumption | |
IS 9606 (pdf) | 1980 | Dimensions of Panels and Racks (482.6 mm System) | |
IS 9647 (pdf) IS 9647 (txt) | 1986 | General Requirements and Methods of Tests for Low Frequency Connectors Below 3 MHz Including DC | IEC Pub 130-1and1A |
IS 9891-1 (pdf) IS 9891-1 (txt) | 1981 | Edge Connectors for Printed Wiring Board and Insulated Board Having a Contact Pitch of 2.54 mm, Part I: Test Schedule and Requirements | |
IS 9891-2 (pdf) | 1981 | Edge Connectors for Printed Wiring Board and Insulated Board Having Contact Pitch 2.54 mm, Part 2: Non-polarised Plug Types 9891 IS-01-11/25/33-W-A-0.75 | |
IS 9891-3 (pdf) | 1981 | Edge Connectors for Printed Wiring Board and Insulated Board Having Contact Pitch 2.54 mm, Part 3: Non-polarised Plug Types 9891 IS-02-11/25/33-I-A-0.75 | |
IS 9891-4 (pdf) | 1981 | Edge Connectors for Printed Wiring Board and Insulated Board Having Contact Pitch 2.54 mm, Part 4: Non-polarised Socket Types 9891 IS-03-11/25/33-W/1-A/B-0.75 | |
IS 10482-1 (pdf) IS 10482-1 (txt) | 1983 | Connectors for Printed Wiring Board, Part 1: Test Schedule and Requirements | |
IS 10482-2 (pdf) | 1983 | Connectors for Printed Wiring Board, Part 2: Male Adapter, Contact Spacing 3.962 mm, Category C, Type 10482 IS-01-6/10/12/15/16/18/22-a/b-2-A-5/1.27 OR 2.54/0.4 | |
IS 10482-3 (pdf) | 1983 | Connectors for Printed Wiring Board, Part 3: Socket, Card Insertion, Contact Spacing 3.962 mm, Category A, Types 10482 IS-02-6/10/12/15/16/18/22-a/b-2-A/B/C-5/1-27 Or2.54/0.4 | |
IS 10482-4 (pdf) IS 10482-4 (txt) | 1986 | Connectors for Printed Wiring Board, Part 4: Socket, Card Insertion, Contact Spacing 3.962 mm, Categories A and AD Types 10482 IS-03 | |
IS 11075-1 (pdf) IS 11075-1 (txt) | 1984 | Radio Frequency Connectors of BNC, TNC and UHF Series, Part 1: Test Schedule and Requirements | |
IS 11075-2-1 (pdf) | 1984 | Radio Frequency Connectors of BNC, TNC and UHF Series, Part 2: BNC Series, Section 1: Straight Plug, Male, Cabled, Type XXXX IS-01-01 to 04 and 50 to 53 | |
IS 11075-2-2 (pdf) | 1985 | Radio Frequency Connectors of BNC, TNC and UHF Series, Part 2: BNC Series, Section 2: Cabled Socket Type 11075 IS-02-01 to 02 and 50 to 51 | |
IS 11075-2-3 (pdf) | 1985 | Specification for Radio Frequency Connectors of BNC, TNC AND UHF Series, Part 2: BNC Series, Section 3: Plug, Right Angle, Cabled Type 11075 IS-03-01 to 02 and 50 to 51 | |
IS 11162-1 (pdf) | 1985 | Dimensions of non-insulated terminal tags for electronic equipment, Part 1: Type 1 | |
IS 11162-2 (pdf) | 1985 | Dimensions of non-insulated terminal tags for electronic equipment, Part 2: Type 2 | |
IS 11162-3 (pdf) | 1985 | Dimensions of non-insulated terminal tags for electronic equipment, Part 3: Type 3 | |
IS 11162-4 (pdf) | 1985 | Dimensions of non-insulated terminal tags for electronic equipment, Part 4: Type 4 | |
IS 11162-5 (pdf) | 1985 | Dimensions of non-insulated terminal tags for electronic equipment, Part 5: Type 5 | |
IS 11162-6 (pdf) | 1985 | Dimensions of non-insulated terminal tags for electronic equipment, Part 6: Type 6 | |
IS 11162-7 (pdf) | 1985 | Dimensions of non-insulated terminal tags for electronic equipment, Part 7: Type 7 | |
IS 11162-8 (pdf) | 1985 | Dimensions of non-insulated terminal tags for electronic equipment, Part 8: Type 8 | |
IS 11719-1-1 (pdf) | 1986 | Dimensions of mechanical structures of the 482.6 mm series, Part 1: Cabinets and pitches of rack structures, Section 1: Cabinets | |
IS 11719-1-2 (pdf) | 1986 | Dimensions of mechanical structures of the 482.6 mm series, Part 1: Cabinets and pitches of rack structures, Section 2: Pitches of rack structures | |
IS 11719-2-1 (pdf) | 1986 | Dimensions of mechanical structures of the 482.6 mm series, Part 2: Subracks and associated plug-in-units, Section 1: Subracks | |
IS 11719-2-2 (pdf) IS 11719-2-2 (txt) | 1986 | Dimensions of mechanical structures of the 482.6 mm series, Part 2: Subracks and associated plug-in-units, Section 2: Plug-in Units | |
IS 11777-1 (pdf) IS 11777-1 (txt) | 1986 | Circular Connectors for Radio and Associated Sound Equipment for Frequencies Below 3 Mhz Including Dc, Part 1: Test Schedule and Requirements | IEC Pub 130-9(71), 130-9 |
IS 11777-2 (pdf) | 1986 | Circular Connectors for Radio and Associated Sound Equipment for Frequencies Below 3 MHz Including DC, Part 2: Free Three-pin Connector for Microphone Type 11777 IS-01 | IEC 60130-9A |
IS 11777-3 (pdf) | 1986 | Circular Connectors for Radio and Associated Sound Equipment for Frequencies Below 3MHz Including DC, Part 3: Fixed Three-socket Connector for Sound Equipment Type 11777 IS-02 | IEC 60130-9A |
IS 11777-4 (pdf) | 1986 | Circular Connectors for Radio and Associated Sound Equipment for Frequencies Below 3 MHz Including DC, Part 4: Free Five-pin Connector for Record Player and Tape Recorder Type, 11777 IS-03 | IEC 60130-9A |
IS 11777-5 (pdf) | 1986 | Circular Connectors for Radio and Associated Sound equipment for Frequencies Below 3 Mhz Including dc, Part 5: Fixed Five-socket Connector for Record Player and Tape Recorder Type 11777 IS-04 | IEC 60130-9A |
IS 11777-6 (pdf) | 1987 | Circular Connectors for Radio and Associated Sound Equipment for Frequencies Below 3 mhz Including dc, Part 6: Free Seven-pin Connector for Stereo Tape Player with Car Radio Type 11777 IS-05 | IEC 60130-9A |
IS 11777-7 (pdf) | 1987 | Circular Connectors for Radio and Associated Sound Equipment for Frequencies Below 3 MHz Including DC, Part 7: Fixed Seven-socket Connector for Stereo Tape Player with Car Radio Type 11777 IS-06 | IEC 60130-9A |
IS 11777-8 (pdf) | 1987 | Circular Connectors for Radio and Associated Sound Equipment for Frequencies Below 3 MHz Including DC, Part 8: Free Seven Pin Connector for Microphone with Remote Control, Type 11777 IS-07 | IEC 60130-9A |
IS 11777-9 (pdf) | 1987 | Circular Connectors for Radio and Associated Sound Equipment for Frequencies Below 3 MHz Including DC, Part 9: Fixed Seven-Socket Connector for Microphone with Remote Control Type 11777 IS-08 | IEC 60130-9A |
IS 11777-10 (pdf) | 1987 | Circular Connectors for Radio and Associated Sound Equipment for Frequencies Below 3 MHz Including DC, Part 10: Free Six-Pin Connector for Various Applications Type 11777 IS-09 | IEC 60130-9A |
IS 11777-11 (pdf) | 1987 | Circular Connectors for Radio and Associated Sound Equipment for Frequencies Below 3 MHz Including DC, Part 11: Fixed Six-Socket Connector for Various Applications Type 11777 IS-10 | IEC 60130-9A |
IS 11777-12 (pdf) | 1987 | Circular Connectors for Radio and Associated Sound Equipment for Frequencies Below 3 MHz Including DC, Part 12: Free Six-Socket Connector for Various Applications, Type 11777 IS-11 | IEC 60130-9A |
IS 11777-13 (pdf) | 1987 | Circular Connectors for Radio and Associated Sound Equipment for Frequencies Below 3 MHz Including DC, Part 13: Fixed Six-Pin Connector for Various Applications, Type 11777 IS-12 | IEC 60130-9A |
IS 11777-14 (pdf) | 1987 | Circular Connectors for Radio and Associated Sound Equipment for Frequencies Below 3 MHz Including DC, Part 14: Free Eight-Pin Connector for Microphone and Other Various Applications, Type 11777 IS-13 | IEC 60130-9B |
IS 11777-15 (pdf) | 1987 | Circular Connectors for Radio and Associated Sound Equipment for Frequencies Below 3 MHz Including DC, Part 15: Fixed Eight-Socket Connector for Microphone and Other Applications, Type 11777 IS-14 | IEC Pub 130-9B |
IS 11778-1 (pdf) IS 11778-1 (txt) | 1987 | Low Frequency, Threaded Coupling, Circular Connectors, Part 1: Test Schedule and Requirements | |
IS 11779-1 (pdf) IS 11779-1 (txt) | 1987 | Low Frequency, Miniature, Bayonet Coupling Circular Connectors, Part 1: Test Schedule and Requirements | |
IS 12195-1-1 (pdf) | 1987 | Dimensions of Sockets for Relays Used in Electronic and Telecommunication Equipment, Part 1: Sockets for Armature Relays - Section 1 : 8 Pin Socket | |
IS 12195-1-2 (pdf) | 1987 | Dimensions of Sockets for Relays Used in Electronic and Telecommunication Equipment, Part 1: Sockets for Armature Relays - Section 2 : 11 Pin Socket | |
IS 12380-1 (pdf) IS 12380-1 (txt) | 1988 | Radio Frequency Connectors of N Series, Part 1: Test Schedule and Requirements | |
IS 12419-1 (pdf) IS 12419-1 (txt) | 1988 | Radio Frequency Connectors of SMA, SMB and SMC Series, Part I: Test Schedule and Requirements | |
IS 12420-2 (pdf) | 1988 | Circular Audio Connectors, Part 2: Socket, Five Contacts, Nonrigid Type 12420 IS-01 | |
IS 12420-3 (pdf) | 1988 | Circular Audio Connectors, Part 3: Plug, Five Contacts, Nonrigid Type 12420 IS-02 | |
IS 12420-4 (pdf) | 1988 | Circular Audio Connectors, Part 4: Plug, Five Contacts Rigid Type 12420 IS-03 | |
IS 12420-5 (pdf) | 1988 | Circular Audio Connectors, Part 5: Plug, Ten Contacts, Rigid Type 12420 IS-04 | |
IS 12420-6 (pdf) | 1988 | Circular Audio Connectors, Part 6: Plug, Ten Contacts, Nonrigid Type 12420 IS-05 | |
IS 12420-7 (pdf) | 1988 | Circular Audio Connectors, Part 7: Socket, Ten Contacts, Nonrigid Type 12420 IS-06 | |
IS 12420-8 (pdf) | 1988 | Circular Audio Connectors, Part 8: Plug, Ten Contacts, Rigid Type 12420 Is-07 | |
IS 12448-1 (pdf) IS 12448-1 (txt) | 1988 | Basic testing procedures and measuring methods for electromechanical components for electronic equipment, Part 1: General | |
IS 12448-2-1 (pdf) | 1988 | BASIC TESTING PROCEDURES AND MEASURING METHODS FOR ELECTROTECHNICAL COMPONENTS FOR ELECTRONIC EQUIPMENT, Part II: GENERAL EXAMINATION, ELECTRICAL CONTINUITY AND CONTACT RESISTANCE TESTS, INSULATION TESTS AND VOLTAGE STRESS TESTS, Section 1: GENERAL EXAMINATION | |
IS 12448-2-2 (pdf) IS 12448-2-2 (txt) | 1988 | General Examination, Electrical Continuity and Contact Resistance tests, Insulation Tests and Voltage Stress Tests, Section 2: Electrical | |
IS 12448-2-3 (pdf) | 1988 | General Examination, Electrical Continuity and Contact Resistance Tests, Insulation Tests and Voltage Stress Tests, Section 3: Insulation Tests | |
IS 12448-2-4 (pdf) | 1988 | Basic testing procedures and measuring methods for electromechanical components for electronic equipment, Part 2: General examination, electrical continuity and contact resistance tests, insulation tests, voltage stress tests, Section 4: Voltage stress tests | |
IS 12448-3 (pdf) IS 12448-3 (txt) | 1989 | Basic testing procedures and measuring methods for electromechanical components for electronic equipment, Part 3: Current carrying capacity test | |
IS 12448-4 (pdf) IS 12448-4 (txt) | 1989 | Basic testing procedures and measuring methods for electromechanical components for electronic equipment, Part 4: Dynamic stress tests | |
IS 12448-5-1 (pdf) | 1989 | Basic testing procedures and measuring methods for electromechanical components for electronic equipment, Part 5: Impact tests (free components), static load tests (fixed components), endurance tests, overload tests, Section 1: Impact test | |
IS 12448-5-2 (pdf) IS 12448-5-2 (txt) | 1989 | Basic testing procedures and measuring methods for electromechanical components for electronic equipment, Part 5: Impact tests (Free components), static load tests (Fixed components), endurance tests and overload tests, Section 2: Static load test (fixed | |
IS 12448-5-3 (pdf) IS 12448-5-3 (txt) | 1989 | Basic testing procedures and measuring methods for electromechanical components for electronic equipment, Part 5: Impact tests (Free components), static load tests (fixed components), endurance tests and overload tests, Section 3: Endurance tests | IEC 60512-5 |
IS 12448-5-4 (pdf) IS 12448-5-4 (txt) | 1989 | Basic testing procedures and measuring methods for electromechanical components for electronic equipment, Part 5: Impact tests (Free components), Static load tests (Fixed components), endurance tests and overload tests, Section 4: Overload tests | IEC 60512-5 |
IS 12448-6 (pdf) IS 12448-6 (txt) | 1991 | Basic testing procedures and measuring methods of electromechanical components for electronic equipment, Part 6: Climatic tests and soldering tests | |
IS 12448-7 (pdf) IS 12448-7 (txt) | 1990 | Basic testing procedures and measuring methods for electromechanical components for electronic equipment, Part 7: Mechanical operating tests and sealing tests | |
IS 12448-8 (pdf) IS 12448-8 (txt) | 1992 | Basic testing procedures and measuring methods for electromechanical components for electronic equipment, Part 8: Connector Tests (Mechanical) and Mechanical Tests on Contacts and Terminations | |
IS 12448-9 (pdf) IS 12448-9 (txt) | 1992 | Basic testing procedures and measuring methods for electromechanical components for electronic equipment, Part 9: Cable-clamping tests, explosion hazard tests,chemical resistance tests,fire hazard tests of | |
IS 13984-1 (pdf) IS 13984-1 (txt) | 1995 | Link and Test Connectors, Part 1: Test Schedule and Requirements | IEC 60130-12 |
IS 13984-2-1 (pdf) | 1994 | Link and Test Connectors, Part 2: Socket for conventional Wiring, Section 1: Two-way Socket link and test Connector | IEC 60130-12 |
IS 13984-2-2 (pdf) | 1994 | link and test connectors, Part 2: Socket for conventional wiring, Section 2: Three-way socket link and test connector | IEC 60130-12 |
IS 13984-2-3 (pdf) | 1994 | Link and test connectors, Part 2: Socket for conventional wiring, Section 3: four-way socket link and test connector | IEC 60130-12 |
IS 13984-2-4 (pdf) | 1995 | link and test connectors, Part 2: Socket for conventional wiring, Section 4: Six-way socket link and test connector | IEC 60130-12 |
IS 13984-3-1 (pdf) | 1995 | link and test connectors, Part 3: Socket for mounting on printed wiring boards, Section 1: Two-way flat mounting socket link and test connector | IEC 60130-12 |
IS 13984-3-2 (pdf) | 1995 | link and test connectors, Part 3: Socket for mounting on printed wiring boards, Section 2: Two-way upright mounting socket link and test connector | IEC 60130-12 |
IS 13984-3-3 (pdf) | 1995 | Link and Test Connectors, Part 3: Socket for Mounting on Printed Wiring boards, Section 3: Three-Way Socket Link and Test Connector | IEC 60130-12 |
IS 13984-3-4 (pdf) | 1995 | Link and Test Connectors, Part 3: Socket for Mounting on Printed Wiring Boards, Section 4: Four-Way Socket Link and Test Connector | IEC 60130-12 |
IS 13984-3-5 (pdf) | 1995 | Link and Test Connectors, Part 3: Socket for Mounting on Printed Wiring Boards, Section 5: Six-Way Socket Link and Test Connector | IEC 60130-12 |
IS 13984-4-1 (pdf) | 1995 | Link and Test Connectors, Part 4: U-Link Plug- Section 1 : U-Link Polarized | IEC 60130-12 |
IS 13984-4-2 (pdf) | 1995 | Link and Test Connectors, Part 4: U-Link Plug, Section 2: U-Link Non-Polarized | IEC 60130-12 |
IS 13984-4-3 (pdf) | 1995 | link and test connectors, Part 4: U-Link Plug, Section 3: Double U-Link Plug Polarized | IEC 60130-12 |
IS 13984-5-1 (pdf) | 1995 | link and test connectors, Part 5: Cord Plug, Section 1: Polarized | IEC 60130-12 |
IS/QC 960000 (pdf) IS/QC 960000 (txt) | 1995 | Electromechanical Switches for Use in Electronic Equipment, Part 1: Generic Specification | |
IS/QC 960100 (pdf) IS/QC 960100 (txt) | 2000 | Electromechanical Switches for Use in Electronic Equipment, Part 2: Sectional Rotary Switches | |
IS/QC 960101 (pdf) IS/QC 960101 (txt) | 2000 | Electromechanical Switches for Use in Electronic Equipment, Part 2: Sectional Rotary Switches, Section 1: Blank Detail Specification | |
IS/QC 960201-4-1 (pdf) IS/QC 960201-4-1 (txt) | 2007 | Electromechanical switches for use in electronic equipment, Part 4: Sectional specification for lever (toggle switches) , Section 1: Blank detail specification | |
IS/QC 960201 (pdf) IS/QC 960201 (txt) | 2007 | Electromechanical switches for use in electronic equipment, Part 4: Sectional specification for lever (toggle) switches , Section 1 Blank detail specification | |
IS/QC 960300 (pdf) IS/QC 960300 (txt) | 1999 | Electromechanical Switches for Use in Electronic Equipment, Part 6: Sectional Sensitive Switches | |
IS/QC 960301 (pdf) IS/QC 960301 (txt) | 1999 | Electromechanical Switches for Use in Electronic Equipment, Part 6: Sectional Sensitive Switches, Section 2: Detail Specification | |
IS/QC 960400 (pdf) IS/QC 960400 (txt) | 1999 | Electromechanical Switches for Use in Electronic Equipment, Part 5: Sectional Pushbutton Switches | |
IS/QC 960500 (pdf) IS/QC 960500 (txt) | 1999 | Electromechanical Switches for Use in Electronic Equipment, Part 3: Sectional In-Line Package Switches | |
IS/QC 960501-3-1 (pdf) IS/QC 960501-3-1 (txt) | 2007 | Electromechanical switches for use in electronic equipment, Part 3: Sectional specification for in-line package switches , Section 1 Blank detail specification |
Last Updated: October 9, 2013
↑