Divisional Index ↑

Public Safety Standards of the Republic of India

Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.

Division Name: Electronics and Information Technology
Section Name: Reliability of Electronic and Electrical Components and Equipment (LITD 2)

StandardYearTitleIBR
IS 1885-39 (pdf)
IS 1885-39 (txt)
1999Electrotechnical Vocabulary, Part 39: Dependability of Electronic and Electrical Items
IS 7354-1 (pdf)1975Guide on reliability of electronic and electrical items, Part 1: Preliminary reliability considerations
IS 7354-2 (pdf)
IS 7354-2 (txt)
1984Guide on Reliability of Electronic and Electrical Items, Part 2: Reliability and Maintainability ManagementIEC 300
IS 7354-3 (pdf)
IS 7354-3 (txt)
2011Guide on Reliability of Electronic and Electrical Items, Part 3: Presentation of Reliability Data on Electronic and Electrical Components (or Parts)IEC 60319
IS 7354-4 (pdf)1974Guide on reliability of electronic and electrical items, Part 4: Collection of reliability,availability and maintainability data from performanceIEC 362
IS 7354-5 (pdf)
IS 7354-5 (txt)
1975Guide on reliability of electronic and electrical items, Part 5: Inclusion of lot-by-lot and periodic inspection procedures in specifications electronic and electrical components (or parts)IEC 419
IS 7354-6 (pdf)
IS 7354-6 (txt)
1983Guide on reliability of electronic and electrical items, Part 6: Inclusion of reliability clauses into specifications for components (or parts)IEC 409
IS 7690 (pdf)1975Mathematical guide to the terms and definitions for reliability of electronic equipment and components (or parts) used thereinIEC 271
IS 8161-1 (pdf)
IS 8161-1 (txt)
1999Guide for Equipment Reliability Testing, Part 1: Principles and ProceduresIEC 605-1
IS 8161-2 (pdf)
IS 8161-2 (txt)
1986Guide for equipment reliability testing, Part 2: Design of test cyclesIEC 605-2
IS 8161-3-1 (pdf)
IS 8161-3-1 (txt)
1986Guide for Equipment Reliability Testing, Part 3: Preferred Test Conditions for Equipment Reliability Testing, Section 1: Indoor Portable Equipment (Low Degree of Simulation)IEC 605-3
IS 8161-3-2 (pdf)
IS 8161-3-2 (txt)
1986Guide for Equipment Reliability Testing, Part 3: Preferred Test Conditions for Equipment Reliability Testing, Section 2: Equipment for Stationery Use in Weather Protected Locations (High Degree of Simulation)IEC 605-3
IS 8161-4 (pdf)
IS 8161-4 (txt)
1985Guide for equipment reliability testing, Part 4: Procedure for determining point estimates and confidence limits from equipment determination testsIEC 605-4
IS 8161-5 (pdf)
IS 8161-5 (txt)
2011Guide for Equipment Reliability Testing, Part 5: Compliance Test Plans for Success RatioIEC 61123:1991
IS 8161-6-1 (pdf)
IS 8161-6-1 (txt)
1983Guide for equipment reliability testing, Part 6: Tests for validity of a constant failure rate assumption, Section 1: Chi-square testIEC 605-6
IS 8161-6-2 (pdf)
IS 8161-6-2 (txt)
1987Guide for equipment reliability testing, Part 6: Tests for validity of a constant failure rate assumption, Section 2: Kolmogorov-smirnov testIEC 605-6
IS 8161-7 (pdf)
IS 8161-7 (txt)
1977Guide for equipment reliability testing, Part 7: Compliance test plans for failure rate and mean time between failures assuming constant failure rateIEC 605-7
IS 8161-11 (pdf)1983Guide for Equipment Reliability Testing, Part XI: Flow Chart Describing Preparations for and Execution of Reliability Tests
IS 9185-1 (pdf)
IS 9185-1 (txt)
1979Endurance (life) test for electronic and electrical components, Part 1: Thermal endurance
IS 9185-2 (pdf)
IS 9185-2 (txt)
1979Endurance (life)test for electronic and electrical components, Part 2: Mechanical endurance
IS 9186 (pdf)
IS 9186 (txt)
1979Guide for screening of electronic and electrical items
IS 9692-1 (pdf)
IS 9692-1 (txt)
1980Guide on maintainability of equipment, Part 1: Introduction to maintainabilityIEC 706-1
IS 9692-2 (pdf)
IS 9692-2 (txt)
1980Guide on maintainability of equipment, Part 2: Maintainability requirements in specifications and contractsIEC 706-1
IS 9692-3 (pdf)
IS 9692-3 (txt)
1981Guide on maintainability of equipment, Part 3: Maintainability programmeIEC 706-1
IS 9692-4 (pdf)
IS 9692-4 (txt)
1987Guide on maintainability of equipment, Part 4: Test and diagnostic proceduresIEC 706-2
IS 9692-5 (pdf)
IS 9692-5 (txt)
1985Guide on maintainability of equipment, Part 5: Maintainability studies during the design phaseIEC 706-2
IS 9692-6 (pdf)
IS 9692-6 (txt)
1983Guide on Maintainability of Equipment, Part 6: Maintainability Verification
IS 9692-7 (pdf)
IS 9692-7 (txt)
1984Guide on maintainability of equipment, Part 7: Collection, analysis and presentation of data related to maintainabilityIEC 706-3
IS 9692-8-1 (pdf)
IS 9692-8-1 (txt)
1988Guide on maintainability of equipment, Part 8: Maintenance and maintenance support planning, Section 1: GeneralIEC 706-2
IS 9692-8-2 (pdf)
IS 9692-8-2 (txt)
1988Guide on maintainability of equipment, Part 8: Maintenance and maintenance support planning, Section 2: Maintenance support analysisIEC 706-2
IS 9692-8-3 (pdf)
IS 9692-8-3 (txt)
1988Guide on maintainability of equipment, Part 8: Maintenance and maintenance support planning, Section 3: Maintenance planning analysisIEC 706-2
IS 9692-8-4 (pdf)
IS 9692-8-4 (txt)
1988Guide on maintainability of equipment, Part 8: Maintenance and maintenance supporting planning, Section 4: Maintenance support resources requirementsIEC 706-2
IS 10139 (pdf)
IS 10139 (txt)
1982Presentation of reliability, maintainability and availability predictionsIEC 863
IS 10673 (pdf)
IS 10673 (txt)
1983Sampling Plans and Procedures for Inspection by Attributes for Electronic ItemsIEC 60410 : 1973 IEC Pub 410
IS 11137-2 (pdf)
IS 11137-2 (txt)
1984Analysis Techniques for System Reliability, Part 2: Procedures for Failure Mode and Effects (FEMA) and Failure Mode, Effects and Criticality Analysis (FMECA)IEC Pub 812
IS 11743 (pdf)
IS 11743 (txt)
1986Guide on Human Safety in Design, Manufacture, Use and Maintenance of Electronic Equipment
IS 15036 (pdf)
IS 15036 (txt)
2001Dependability Management - Application Guide Analysis Techniques for Dependability - Guide on MethodologyIEC 60300-3-1
IS 15037 (pdf)
IS 15037 (txt)
2011Analysis Techniques for Dependability - Reliability Block Diagram and Boolean MethodsIEC 61078:2006
IS 15038 (pdf)
IS 15038 (txt)
2011Reliability Growth - Statistical Test and Estimation MethodsIEC 61164:2004
IS 15444-1 (pdf)
IS 15444-1 (txt)
2004Reliability Stress Screening, Part 1: Repairable Items Manufactured in LotsIEC 61163-1
IS 15444-2 (pdf)
IS 15444-2 (txt)
2005Reliability Stress Screening, Part 2: Electronic Component
IS 15474-3-6 (pdf)
IS 15474-3-6 (txt)
2005Dependability Management, Part 3: Application Guide, Section 6: Software Aspects of Dependability
IS 15474-3-7 (pdf)
IS 15474-3-7 (txt)
2005Dependability Management, Part 1: Application Guide, Section 7: Reliability stress screening of electronic hardwareIEC 60300-3-7
IS 15474 (pdf)2004Dependability Management - Application Guide - Life cycle costingIEC 60300-3-3
IS 15613 (pdf)
IS 15613 (txt)
2005Software dependability through the software life-cycle process - Application GuideIEC 61713

Last Updated: September 6, 2013