Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.
Division Name: Electrotechnical
Section Name: Power Cables (ETD 9)
Standard | Year | Title | IBR |
---|---|---|---|
IS 692 (pdf) | 1994 | Paper insulated lead-sheathed cables for rated voltage up to and including 33 kv specification | |
IS 694 (pdf) IS 694 (txt) | 2010 | POLYVINYL CHLORIDE INSULATED UNSHEATHED AND SHEATHED CABLES/CORDS WITH RIGID AND FLEXIBLE CONDUCTOR FOR RATED VOLTAGES UP TO AND INCLUDING 450/750 V | IEC 60227 - 1 to 5 |
IS 1255 (pdf) IS 1255 (txt) | 1983 | Code of practice for installation and maintenance of power cables up to and including 33 kV rating | |
IS 1554-1 (pdf) IS 1554-1 (txt) | 1988 | PVC insulated (heavy duty) electric cables, Part 1: For working voltages up to and including 1 100 V | IEC 60502) |
IS 1554-2 (pdf) IS 1554-2 (txt) | 1988 | PVC Insulated (Heavy Duty) Electric Cables, Part 2: for Working Voltages from 3'3 kV up to and Including 11 kV | 60502) |
IS 2465 (pdf) IS 2465 (txt) | 1984 | Cables for motor vehicles | |
IS 2593 (pdf) IS 2593 (txt) | 1984 | Flexible Cables for Miners' Cap-lamps | |
IS 3961-1 (pdf) | 1967 | Recommended current ratings for cables, Part 1: Paper insulated lead sheathed cables | |
IS 3961-2 (pdf) IS 3961-2 (txt) | 1967 | Recommended current ratings for cables, Part 2: PVC insulated and PVC sheathed heavy duty cables | |
IS 3961-3 (pdf) IS 3961-3 (txt) | 1968 | Recommended current ratings for cables, Part 3: Rubber insulated cables | |
IS 3961-5 (pdf) IS 3961-5 (txt) | 1968 | Recommended current ratings for cables, Part 5: PVC insulated light duty cables | |
IS 4289-1 (pdf) IS 4289-1 (txt) | 1984 | Flexible Cables for Lifts and Other Flexible Connections, Part 1: Elastomer Insulated Cables | IEC 60245-5 |
IS 4289-2 (pdf) IS 4289-2 (txt) | 2000 | Flexible Cables for Lifts and Other Flexible Connections, Part 2: PVC Insulated Circular Cables | IEC 60227-6 |
IS 5819 (pdf) IS 5819 (txt) | 1970 | Recommended Short-circuit Ratings of High Voltage PVC Cables | |
IS 5831 (pdf) IS 5831 (txt) | 1984 | PVC insulation and sheath of electric cables | IEC 60502 |
IS 5950 (pdf) IS 5950 (txt) | 1984 | Shot firing cables (for use other than in shafts) | |
IS 6380 (pdf) | 1984 | Elastomeric insulation and sheath of electric cables | IEC 60502 |
IS 6554 (pdf) | 1983 | Soldering Ferrules of Straight-Through Joints | |
IS 7093 (pdf) IS 7093 (txt) | 1973 | Straight through joint boxes and lead sleeves for paper insulated lead sheathed cables up to and including 11 kV | |
IS 7098-1 (pdf) IS 7098-1 (txt) | 1988 | Crosslinked polyethylene insulated PVC sheathed cables, Part 1: For working voltage upto and including 1 100 V | IEC 60502 |
IS 7098-2 (pdf) IS 7098-2 (txt) | 2011 | Crosslinked Polyethylene Insulated Thermoplastics Sheathed Cables, Part 2: for Working Voltages from 3.3 kV up to and Including 33 kV | |
IS 7098-3 (pdf) | 1993 | Cross-linked polyethylene insulated thermoplastic sheathed cables, Part 3: For working voltages from 66 kV upto and including 220 kV | |
IS 8130 (pdf) IS 8130 (txt) | 1984 | Conductors for insulated electric cables and flexible cords | IEC 60228 |
IS 8308 (pdf) | 1993 | Compression type tubular in-line connectors for aluminium conductors of insulated cables | |
IS 8309 (pdf) | 1993 | Compression type tubular terminal ends for aluminium conductors of insulated cables | |
IS 8337 (pdf) IS 8337 (txt) | 1976 | Performance requirements of compression joints of aluminium conductors in insulated cables | |
IS 8394 (pdf) | 1977 | Soldering and welding type terminal ends for conductors of insulated cables | |
IS 8438 (pdf) | 1987 | Moulds of cast resin based straight through joints for cables for voltages upto and including 1100 V | |
IS 9553 (pdf) IS 9553 (txt) | 1987 | Moulds suitable for cast resin based terminations for cables for voltages up to and including 1000 V | |
IS 9646 (pdf) IS 9646 (txt) | 1992 | Moulds suitable for cast resin-based joints for cables for voltages upto and including 1 100 V | |
IS 9857 (pdf) | 1990 | Welding Cables | IEC 60245-6 |
IS 9968-1 (pdf) IS 9968-1 (txt) | 1988 | Elastomer insulated cables, Part 1: For working voltages upto and including 1 100 V | |
IS 9968-2 (pdf) | 2002 | Elastomer-insulated Cables, Part 2: For Working Voltages from 3.3 kV up to and Including 3 3kV | |
IS 10418 (pdf) IS 10418 (txt) | 1982 | Drums for electric cables | |
IS 10435-1 (pdf) IS 10435-1 (txt) | 1983 | Inverted Type Cable end Boxes for Outdoor Terminations Suitable for Paper Insulated Cables, Part I: Belted Type, Multicore Cables up to and Including II kV Grade | |
IS 10462-1 (pdf) IS 10462-1 (txt) | 1983 | Fictitious Calculation Method for Determination of Dimensions of Protective Coverings of Cables, Part I: Elastomeric and Thermoplastic Insulated Cables | IEC 60502 |
IS 10462-2 (pdf) | 1991 | Fictitious calculation method for determination of dimensions of protective coverings of cables, Part 2: Paper insulated cables | IEC 60055-2 |
IS 10606 (pdf) IS 10606 (txt) | 1983 | Cast iron joint boxes for tee and branch trouser joints suitable for paper insulated cables for voltages upto and including 11 kV | |
IS 10810-0 (pdf) | 1984 | Method of test for cables, Part 0: General | |
IS 10810-1 (pdf) | 1984 | Methods of test for cables, Part 1: Annealing test for wires used in conductors | |
IS 10810-2 (pdf) | 1984 | Methods of test for cables, Part 2: Tensile test for aluminium wires | |
IS 10810-3 (pdf) | 1984 | Methods of test for cables, Part 3: Wrapping test for aluminium wires | |
IS 10810-4 (pdf) | 1984 | Methods of test for cables, Part 4: Persulphate test of conductor | |
IS 10810-5 (pdf) | 1984 | Methods of test for cables, Part 5: Conductor resistance test | |
IS 10810-6 (pdf) | 1984 | Methods of test for cables, Part 6: Thickness of thermoplastic and elastomeric insulation and sheath | |
IS 10810-7 (pdf) IS 10810-7 (txt) | 1984 | Methods of test for cables, Part 7: Tensile strength and elongation at break of thermoplastic and elastomeric insulation and sheath | |
IS 10810-8 (pdf) | 1984 | Method of test for cables, Part 8: Breaking strength and elongation at break for impregnated paper insulation | |
IS 10810-9 (pdf) | 1984 | Methods of test for cables, Part 9: Tear resistance for paper insulation | |
IS 10810-10 (pdf) | 1984 | Methods of test for cables, Part 10: Loss of mass test | |
IS 10810-11 (pdf) | 1984 | Methods of test for cables, Part 11: Thermal aging in air | |
IS 10810-12 (pdf) | 1984 | Methods of Test for Cables, Part 12: Shrinkage Test | |
IS 10810-13 (pdf) IS 10810-13 (txt) | 1984 | Methods of test for cables, Part 13: Ozone resistance test | |
IS 10810-14 (pdf) | 1984 | Methods of test for cables, Part 14: Heat shock test | |
IS 10810-15 (pdf) | 1984 | Methods of Test for Cables, Part 15: Hot Deformation Test | |
IS 10810-16 (pdf) | 1986 | Methods of test for cables, Part 16: Accelerated ageing test by oxygen pressure method | |
IS 10810-17 (pdf) | 1986 | Methods of test for cables, Part 17: Tear resistance test for heavy duty sheath | |
IS 10810-19 (pdf) | 1984 | Methods of test for cables, Part 19: Bleeding and blooming test | |
IS 10810-20 (pdf) | 1984 | Methods of test for cables, Part 20: Cold bend test | |
IS 10810-21 (pdf) | 1984 | Methods of test for cables, Part 21: Cold impact test | |
IS 10810-22 (pdf) | 1984 | Methods of test for cables, Part 22: Vicat softening point | |
IS 10810-23 (pdf) | 1984 | Methods of test for cables, Part 23: Melt-flow index | |
IS 10810-24 (pdf) | 1984 | Methods of test for cables, Part 24: Water soluble impurities test of insulating paper | |
IS 10810-25 (pdf) | 1984 | Methods of test for cables, Part 25: Conductivity of water extract test of insulating paper | |
IS 10810-26 (pdf) | 1984 | Methods of test for cables, Part 26: pH value of water extract test of insulating paper | |
IS 10810-27 (pdf) | 1984 | Methods of Test for Cables, Part 27: Ash Content Test of Insulating Paper | |
IS 10810-28 (pdf) | 1984 | Methods of test for cables, Part 28: Water absorption test (Electrical) | |
IS 10810-29 (pdf) | 1984 | Methods of test for cables, Part 29: Environmental stress cracking test | |
IS 10810-30 (pdf) | 1984 | Methods of test for cables, Part 30: Hot set test | |
IS 10810-31 (pdf) | 1984 | Methods of test for cables, Part 31: Oil resistance test | |
IS 10810-32 (pdf) | 1984 | Methods of test for cables, Part 32: Carbon content test for polyethylene | |
IS 10810-33 (pdf) | 1984 | Methods of test for cables, Part 33: Water absorption test (Gravimetric) | |
IS 10810-34 (pdf) | 1984 | Methods of test for cables, Part 34: Measurement of thickness of metallic sheath | |
IS 10810-35 (pdf) | 1984 | Methods of Test for Cables, Part 35: Determination of Tin in Lead Alloy for Sheathing | |
IS 10810-36 (pdf) | 1984 | Methods of test for cables, Part 36: Dimensions of armouring material | |
IS 10810-37 (pdf) | 1984 | Methods of Test for Cables, Part 37: Tensile Strength and Elongation at Break of Armouring Materials | |
IS 10810-38 (pdf) | 1984 | Methods of test for cables, Part 38: Torsion test on galvanized steel wires for armouring | |
IS 10810-39 (pdf) | 1984 | Methods of test for cables, Part 39: Winding test on galvanized steel strips for armouring | |
IS 10810-40 (pdf) | 1984 | Methods of Test for Cables, Part 40: Uniformity of Zinc Coating on Steel Armour | |
IS 10810-41 (pdf) | 1984 | Methods of test for cables, Part 41: Mass of zinc coating on steel armour | |
IS 10810-42 (pdf) | 1984 | Methods of test for cables, Part 42: Resistivity test of armour wires and strips and conductance test of armour (wires/strips) | |
IS 10810-43 (pdf) | 1984 | Methods of Test for Cables, Part 43: Insulation Resistance | |
IS 10810-44 (pdf) | 1984 | Methods of test for cables, Part 44: Spark test | |
IS 10810-45 (pdf) | 1984 | Methods of Test for Cables, Part 45: High Voltage Test | |
IS 10810-46 (pdf) | 1984 | Methods of test for cables, Part 46: Partial discharge test | |
IS 10810-47 (pdf) | 1984 | Methods of test for cables, Part 47: Impulse test | |
IS 10810-48 (pdf) | 1984 | Methods of Test for Cables, Part 48: Dielectric Power Factor Test | |
IS 10810-49 (pdf) | 1984 | Methods of Test for Cables, Part 49: Heating Cycle Test | |
IS 10810-50 (pdf) | 1984 | Methods of test for cables, Part 50: Bending test | |
IS 10810-51 (pdf) | 1984 | Methods of test for cables, Part 51: Dripping test | |
IS 10810-52 (pdf) | 1984 | Methods of test for cables, Part 52: Drainage test | |
IS 10810-53 (pdf) | 1984 | Methods of Test for Cables, Part 53: Flammability Test | |
IS 10810-54 (pdf) | 1984 | Methods of test for cables, Part 54: Static flexibility test | |
IS 10810-55 (pdf) | 1986 | Methods of test for cables, Part 55: Abrasion test | |
IS 10810-56 (pdf) | 1987 | Methods of test for cables, Part 56: Accelerated aging by the air-pressure method | |
IS 10810-57 (pdf) | 1987 | Methods of test for cables, Part 57: Flexing test | |
IS 10810-58 (pdf) IS 10810-58 (txt) | 1998 | Methods of test for cables, Part 58: Oxygen index test - [IS 10810(Part 58] | |
IS 10810-59 (pdf) | 1988 | Methods of test for cables, Part 59: Determination of the amount of halogen acid gas evolved during combustion of polymeric materials taken from cables | |
IS 10810-60 (pdf) | 1988 | Methods of test for cables, Part 60: Thermal stability of PVC insulation and sheath | |
IS 10810-61 (pdf) | 1988 | Methods of test for cables, Part 61: Flame retardant test | |
IS 10810-62 (pdf) IS 10810-62 (txt) | 1993 | Methods of test for cables, Part 62: Fire resistance test for bunched cables | |
IS 10810-63 (pdf) IS 10810-63 (txt) | 1993 | Methods of test for cables, Part 63: Smoke density of electric cables under fire conditions | |
IS 10810-64 (pdf) | 2003 | Methods of Test for Cables, Part 64: Measurement of Temperature Index | |
IS 10877 (pdf) IS 10877 (txt) | 1984 | Dimensions for Moulds for Cast Resin Based Indoor Terminations for Cables for Working Voltages from 3.3 kV Up to and Including 11 kV | |
IS 11979 (pdf) IS 11979 (txt) | 1987 | Moulds for cast resin based straight through joints for cables for working voltages from 3.3 kV upto and including 11 kV | |
IS 12909 (pdf) IS 12909 (txt) | 1990 | Power Cables - Dimensions for Moulds for Cast Resin Based Outdoor Terminations for Voltages Above 1100 Volts and up to and Including 11000 Volts | |
IS 12943 (pdf) IS 12943 (txt) | 1990 | Brass glands for PVC cables | |
IS 13573-1 (pdf) IS 13573-1 (txt) | 2011 | Cable Accessories for Extruded Power Cables, Part 1: for Working Voltages for 1.1 kV upto and Including 3.3kV(E) - Test Methods and Test Requirements | |
IS 13573-2 (pdf) IS 13573-2 (txt) | 2011 | Cable Accessories for Extruded Power Cables, Part 2: for Working Voltages for 3.3kV(UE) upto and Including 33kV(E) - Test Requirements | |
IS 13573-3 (pdf) IS 13573-3 (txt) | 2011 | Cable Accessories for Extruded Power Cables, Part 3: for Working Voltages for 3.3kV(UE) upto and Including 33kV(E) - Test Methods | |
IS 13573 (pdf) | 1992 | Joints and Terminations of Polymeric Cables for Working Voltages from 66kV Up To and Including 33 kV - Performance Requirements and Type Test | |
IS 13705 (pdf) IS 13705 (txt) | 1993 | Transition Joints of Cables for Working Voltages from 11 kV Up to and Including 33 kV - Performance Requirements and Type Tests | IEC 60502 |
IS 14255 (pdf) IS 14255 (txt) | 1995 | Aerial Bunched Cables for working voltagess upto and including 1100 Volts | |
IS 14494 (pdf) IS 14494 (txt) | 1998 | Elastomer insultated flexible cables for use in mines (combined revision of IS:691 and IS:1026) |
Last Updated: September 6, 2013
↑