Divisional Index ↑

Public Safety Standards of the Republic of India

Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.

Division Name: Electrotechnical
Section Name: Power Systems Relays (ETD 35)

StandardYearTitleIBR
IS 3231-0 (pdf)
IS 3231-0 (txt)
1986Electrical relays for power systems protection, Part 0: General introduction and list of parts
IS 3231-1-1 (pdf)1986Electrical Relays for Power System Protection, Part 1: General Requirements, Section 1: Contact Performance
IS 3231-1-2 (pdf)
IS 3231-1-2 (txt)
1986Electrical relays for power system protection, Part 1: General requirements, Section 2: Insulation tests
IS 3231-1-3 (pdf)
IS 3231-1-3 (txt)
1986Electrical realys for power system protection, Part 1: General requirements, Section 3: High frequency disturbance test for static relaysIEC 60255-3 : 1989 IEC 255-4
IS 3231-2-1 (pdf)
IS 3231-2-1 (txt)
1987Electrical Relays for Power System Protection, Part 2: Requirements for Principal Families, Section 1: All-or-Nothing RelaysIEC 255-1-00
IS 3231-2-2 (pdf)
IS 3231-2-2 (txt)
1987Electrical Relays for Power System Protection, Part 2: Requirements for Principal Families, Section 2: General Requirements for Measuring Relays
IS 3231-2-3 (pdf)
IS 3231-2-3 (txt)
1987Electrical relays for power system protection, Part 2: Requirements for principal families, Section 3: General requirements for thermal relaysIEC 255-8
IS 3231-3-1 (pdf)1987Electrical Relays for Power System Protection, Part 3: Requirements for Particular Group of Relays, Section 1: Non-specified Time or Independent Specified Time Measuring RelaysIEC 255-3
IS 3231-3-2 (pdf)
IS 3231-3-2 (txt)
1987Electrical Relays for Power System Protection, Part 3: Requirements for Particular Group of Relays, Section 2: Dependent Specified Time Measuring RelaysIEC 255-13
IS 3231-3-3 (pdf)
IS 3231-3-3 (txt)
1987Electrical Relays for Power System Projection, Part 3: Requirements for Particular Group of Relays, Section 3: Biased (Percentage) Differential RelaysIEC 255-13
IS 3231-3-4 (pdf)
IS 3231-3-4 (txt)
1987Electrical Relays for Power System Protection, Part 3: Requirements for Particular Group of Relays, Section 4: Directional Relays and Power RelaysIEC 255-12
IS 3231-3-5 (pdf)
IS 3231-3-5 (txt)
1987Electrical relays for power system Protection, Part 3: Requirements for particular group of relays, Section 5: Impedance measuring relaysIEC 255-16
IS 3637 (pdf)
IS 3637 (txt)
1966Gas operated relays
IS 3638 (pdf)1966Application guide for gas operated relays
IS 3842-1 (pdf)
IS 3842-1 (txt)
1967Application guide for electrical relays for ac systems, Part 1: Overcurrent relays for feeders and transformers
IS 3842-2 (pdf)
IS 3842-2 (txt)
1966Application guide for electrical relays for ac systems, Part 2: Overcurrent relays for generators and motors
IS 3842-3 (pdf)1966Application guide for electrical relays for ac systems, Part 3: Phase unbalance relays including negative phase sequence relays
IS 3842-4 (pdf)1966Application Guide for Electrical Relays for ac Systems, Part 4: Thermal Relays
IS 3842-5 (pdf)
IS 3842-5 (txt)
1968Application guide for electrical relays for ac systems, Part 5: Distance protection relays
IS 3842-6 (pdf)
IS 3842-6 (txt)
1972Application Guide for Electrical Relays for ac Systems, Part 6: Power Relays
IS 3842-7 (pdf)
IS 3842-7 (txt)
1972Application guide for electrical relays for ac systems, Part 7: Frequency relays
IS 3842-8 (pdf)
IS 3842-8 (txt)
1976Application guide for electrical relays for ac systems, Part 8: Voltage relays
IS 3842-9 (pdf)
IS 3842-9 (txt)
1977Application guide for electrical relays for ac systems, Part 9: Relays for busbar protection
IS 3842-10 (pdf)
IS 3842-10 (txt)
1976Application Guide for Electrical Relays for ac Systems, Part X: Relays for Transverse Differential Protection
IS 3842-12 (pdf)
IS 3842-12 (txt)
1976Application guide for electrical relays for ac systems, Part 12: Differential relays for transformers
IS 4483-1 (pdf)1968Preferred panel cutout dimensions for electrical relays, Part 1: Flush mounting IDMTL relays
IS 5834-1 (pdf)
IS 5834-1 (txt)
1994Electrical Timer Relays for Industrial Purposes, Part 1: Pneumatic
IS 5834-2 (pdf)
IS 5834-2 (txt)
1993Electrical Timer Relays for Industrial Purposes, Part 2: Motorized
IS 5834-3 (pdf)
IS 5834-3 (txt)
1981electrical timber relays industrial purposes, Part 3: Electronic
IS 8686 (pdf)
IS 8686 (txt)
1977Static protective relaysIEC 255-4
IS 8714 (pdf)
IS 8714 (txt)
1978Electrical protective relays for use in seismic areas
IS 9124 (pdf)1979Guide for maintenance and field testing of electrical relays
IS 9994 (pdf)
IS 9994 (txt)
1981Potential relays for capacitor start-capacitor run hermetic compressors
IS 10075 (pdf)
IS 10075 (txt)
1981Start relay and overload protector for resistance start induction run hermetic compressors
IS 12083-1 (pdf)
IS 12083-1 (txt)
1986Electrical Relays, Part 1: Contact PerformanceIEC 255-0-20
IS 12083-2 (pdf)
IS 12083-2 (txt)
1986Electrical relays, Part 2: Insulation testsIEC 255-5
IS 14122 (pdf)
IS 14122 (txt)
1994Built in thermal protection for electric motors rated up to 660 V acEC 60034-11
IS/QC 160000-1 (pdf)
IS/QC 160000-1 (txt)
1988Electrical Relays, Part 1: Test and Measurement Procedures for Electromechanical All-or-Nothing Relays
IS/QC 160000-2 (pdf)
IS/QC 160000-2 (txt)
1988Electrical Relays, Part 2: Application of the IEC Quality Assessment System for Electronic Components to All-or-Nothing Relays
IS/QC 160100 (pdf)
IS/QC 160100 (txt)
1988Electrical Relays Sectional Specification: Electromechanical All-or-Nothing Relays of Assessed Quality
IS/QC 160101 (pdf)
IS/QC 160101 (txt)
1988Electrical Relays - Blank Detail Specification : Electromechanical All-or-Nothing Relays of Assessed Quality Test Schedules 1, 2 and 3

Last Updated: September 6, 2013