Divisional Index ↑

Public Safety Standards of the Republic of India

Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.

Division Name: Electrotechnical
Section Name: Winding Wire (ETD 33)

StandardYearTitleIBR
IS 482 (pdf)
IS 482 (txt)
1981Reels for Covered Round Electrical Winding Wires
IS 2069 (pdf)1991Drums for covered winding wires and strips for electrical purpose
IS 4685-1 (pdf)1968Varnish bonded glass-fibre covered copper conductors, Part 1: Round wires
IS 5825 (pdf)
IS 5825 (txt)
1993Test procedure for the determination of the temperature index of enamelled winding wiresIEC Pub 172
IS 6162-1 (pdf)1971Paper-Covered Aluminium Conductors, Part I: Round ConductorsIEC 60111
IS 6162-2 (pdf)1971Paper Covered Aluminium Conductors, Part II: Rectangular ConductorsIEC 60111
IS 6181 (pdf)1971Varnish Bonded Glass-Fibre Braided Rectangular Copper Conductors
IS 7391-1 (pdf)1974Cotton covered copper conductors, Part 1: Round conductorsIEC 60182
IS 7391-2 (pdf)
IS 7391-2 (txt)
1974Cotton covered copper conductors, Part 2: Rectangular conductors
IS 7404-1 (pdf)
IS 7404-1 (txt)
1991Paper Covered Copper Conductors, Part 1: Round Conductors
IS 7576 (pdf)
IS 7576 (txt)
1974Bunched enamelled copper conductors with silk coveringIEC 60317-1
IS 8572 (pdf)
IS 8572 (txt)
1993Paper covered flexible/stranded copper conductors for transformer leads
IS 8783-1 (pdf)1995Winding wires for submersible motors, Part 1: Conductor data
IS 8783-2 (pdf)
IS 8783-2 (txt)
1995Winding wires for submersible motors, Part 2: Materials for dielectric and jacket
IS 8783-3 (pdf)
IS 8783-3 (txt)
1995Winding wires for submersible motors, Part 3: Methods of tests
IS 8783-4-1 (pdf)
IS 8783-4-1 (txt)
1995Winding Wires for Submersible Motors, Part 4: Individual Wires, Section 1: HR PVC Insulated Wires
IS 8783-4-2 (pdf)
IS 8783-4-2 (txt)
1995Winding Wires for Submersible Motors, Part 4: Individual Wires, Section 2: Crosslinked Polyethylene Insulated and Polymide jacketed wires
IS 8783-4-3 (pdf)1995Winding Wires for Submersible Motors, Part 4: Individual Wires, Section 3: Polyester and Polypropylene Insulated Winding Wires
IS 9148 (pdf)1979Tape wrapped rectangular and square copper wires with a temperature index of 220
IS 9778 (pdf)
IS 9778 (txt)
1981Guide for evaluation of thermal endurance of varnish bonded glass-fibre covered rectangular copper conductors
IS 10031 (pdf)1981Taper barreled delivery spools for covered round electrical winding wiresIEC 60264-3
IS 11174 (pdf)
IS 11174 (txt)
1984Aromatic polyamide paper covered rectangular and square copper wires with temperature index 200
IS 11184 (pdf)
IS 11184 (txt)
1984Enamelled and varnish bonded glass fibre covered round copper wires
IS 11395 (pdf)
IS 11395 (txt)
1985Tape wrapped round copper wires with temperature index of 220
IS 11597 (pdf)
IS 11597 (txt)
1986Polyester tape wrapped, varnish bonded glass-fibre covered rectangular paper conductors
IS 13343 (pdf)
IS 13343 (txt)
1992Guide for Thermal Endurance of Enamelled and Varnish Bonded Glass Covered Rectangular Copper Conductor
IS 13730-0-1 (pdf)2012Specifications for Particular Types of Winding Wires, Part 0: General Requirements, Section 1: Enamelled Round Copper WireIEC 60317-0-1
IS 13730-0-2 (pdf)
IS 13730-0-2 (txt)
2011Specifications for Particular Types of Winding Wires, Part 0: General Requirements, Section 2: Enamelled Rectangular Copper WireIEC Pub 317-0-2:1990
IS 13730-0-3 (pdf)
IS 13730-0-3 (txt)
2012Specifications for Particular Types of Winding Wires, Part 0: General Requirements, Section 3: Enamelled Round Aluminium WireIEC 60317-0-3:2008
IS 13730-0-4 (pdf)
IS 13730-0-4 (txt)
2011Specifications for Particular Types of Winding Wires, Part 0: General Requirements, Section 4: Glass-Fibre Wound Resin or Varish impregnated Bare or enamelled rectangular copper wireIEC Pub 317-0-4:1990
IS 13730-0-5 (pdf)
IS 13730-0-5 (txt)
2012Particular Types of Winding Wires, Part 0: General Requirements, Section 5: Glass-Fibre Braided Resin or Varnish Impregnated, Bare or Enamelled Rectangular Copper WireIEC 60317-0-5:2006
IS 13730-0-6 (pdf)
IS 13730-0-6 (txt)
2012Specification for Particular Types of Winding Wires, Part 0: General Requirements, Section 6: Glass-Fibre Wound Resin or Varnish Impregnated, Bare or Enamelled Round Copper WireIEC 60317-3-6:2007
IS 13730-2 (pdf)
IS 13730-2 (txt)
2012Specifications for Particular Types of Winding Wires, Part 2: Solderable Polyurethane Enamelled Round Copper Wire, Class 130, with a Bonding LayerIEC 60317-2:2000
IS 13730-3 (pdf)
IS 13730-3 (txt)
2012Specifications for Particular Types of Winding Wires, Part 3: Polyester Enamelled Round Copper Wire, Class 155IEC 60317-3:2004
IS 13730-8 (pdf)
IS 13730-8 (txt)
1996particular types of winding wires, Part 8: polyesterimide enamelled round copper wire class 180IEC 317-8
IS 13730-9 (pdf)1994particular types of winding wires, Part 09: Polyester enamelled round aluminium wire, Class 130
IS 13730-13 (pdf)
IS 13730-13 (txt)
1993Particular types of winding wires, Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, Class 200IEC Pub 317-13
IS 13730-15 (pdf)1994Particular types of winding wires, Part 15: Polyesterimide enamelled round aluminium wire, Class 180IEC Pub 317-15
IS 13730-16 (pdf)1996Particular types of winding wires, Part 16: Polyester enamelled rectangular copper wire, Class 155IEC 317-16
IS 13730-17 (pdf)
IS 13730-17 (txt)
1996particular types of winding wires, Part 17: Polyvinyl acetal enamelled rectangular copper wire, Class 105IEC 317-17
IS 13730-20 (pdf)
IS 13730-20 (txt)
1993Particular types of winding wires, Part 20: Solderable polyurethane enamelled round copper wire, Class 155IEC Pub 317-20
IS 13730-26 (pdf)
IS 13730-26 (txt)
1996particular types of winding wires, Part 26: Polymide-imide enamelled round copper wire, Class 200IEC 317-26
IS 13730-27 (pdf)1996Specifications for Particular Types of Winding Wires, Part 27: Paper Covered Rectangular Copper WireIEC 317-27
IS 13730-28 (pdf)
IS 13730-28 (txt)
1996particular types of winding wires, Part 28: Polyesterimide enamelled rectangular copper wire, Class 180IEC 317-28
IS 13730-29 (pdf)
IS 13730-29 (txt)
1996Specifications for Particular Types of Winding Wires, Part 29: Polyester or Polyesterimide Overcoated with Polyamide-imide Enamelled Rectangular Copper Wire, Class 200IEC 317-29
IS 13730-31 (pdf)
IS 13730-31 (txt)
1997Specifications for Particular Types of Winding Wires, Part 31: Glass-fibre Wound, Polyester or Polyesterimide Varnish-treated, Bare or En enamelled rectangular copper wire, temperature index 180IEC 317-31
IS 13730-32 (pdf)
IS 13730-32 (txt)
1997particular types of winding wires, Part 32: Glass-fibre wound, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index 155IEC 317-32
IS 13730-33 (pdf)
IS 13730-33 (txt)
1997particular types of winding wieres, Part 33: Glass-fibre wound, silicone varnish treated bare or enamelled rectangular copper wire, temperature, index 200IEC 317-33
IS 13730-34 (pdf)
IS 13730-34 (txt)
2000Specifications for Particular Types of Winding Wires, Part 34: Polyester Enamelled Round Copper Wire, class 130 LIEC Pub 317-34
IS 13730-39 (pdf)
IS 13730-39 (txt)
2005Specifications for particular types of winding wires, Part 39: Glass-fibre braided, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index 180IEC 60317-39
IS 13730-43 (pdf)
IS 13730-43 (txt)
2005Specifications for particular types of winding wires, Part 43: Aromatic polymide tape wrapped round copper wires, Class 240IEC 60317-3
IS 13730-44 (pdf)
IS 13730-44 (txt)
2005Specifications for particular types of winding wires, Part 44: Aromatic polyimide tape wrapped rectangular Coo0per wire, Class 240IEC 60317-44
IS 13730-45 (pdf)
IS 13730-45 (txt)
1999Specifications for Particular Types of Winding Wires, Part 45: Polyester Enamelled Round Copper Wire, Class 130IEC 60317-45
IS 13730-48 (pdf)
IS 13730-48 (txt)
2005Specifications for particular types of winding wires : Part 48 Glass-fibre wound resin or varnish-impregnated, bare or enamelled round copper wire, temperature index 155IEC 60317-48
IS 13730-49 (pdf)
IS 13730-49 (txt)
2005Specifications for particular types of winding wires : Part 49 Glass-fibre wound resin or varnish-impregnated, bare or enamelled round copper wire, temperature index 180IEC 60317-49
IS 13730-50 (pdf)
IS 13730-50 (txt)
2005particular types of winding wires, Part 50: Glass-Fibre Wound Resin or Varnish-impregnated, bare or enamelled round copper wire, temperature index 200IEC 60317-50
IS 13730-53 (pdf)
IS 13730-53 (txt)
2005particular types of winding wires, Part 53: Aromatic polyimide (Aramid) tape wrapped rectangular copper wire, temperature Index 220IEC 60317-53
IS 13778-1 (pdf)
IS 13778-1 (txt)
2011WINDING WIRES - TEST METHODS
IS 13778-2 (pdf)1993Methods of test for winding wires, Part 2: Determination of dimensionsEC 60851-2:1985
IS 13778-2 (pdf)
IS 13778-2 (txt)
2013Methods of test for winding wires, Part 2: Determination of dimensionsEC 60851-2:2009
IS 13778-3 (pdf)
IS 13778-3 (txt)
2012Winding wires - Test methods, Part 3: Mechnical PropertiesIEC 60851-3:2009
IS 13778-4 (pdf)
IS 13778-4 (txt)
2011Winding Wires - Test Methods, Part 4: Chemical propertiesIEC 60851-4:2005
IS 13778-5 (pdf)
IS 13778-5 (txt)
2012Winding Wires - Test Methods, Part 5: Electrical PropertiesIEC 60851-5:2008
IS 13778-6 (pdf)2011Winding Wires - Test Methods, Part 6: Thermal propertiesIEC 60851-6:1996
IS 14841-2-1 (pdf)2000Packaging of Winding Wires, Part 2: Cylindrical Barrelled Delivery Spools, Section 1: Basic DimensionsIEC 60264-2-1
IS 14841-2-2 (pdf)
IS 14841-2-2 (txt)
2000Packaging of Winding Wires, Part 2: Cylindrical Barrelled Delivery Spools, Section 2: Returnable Spools Made from Thermoplastic MaterialsIEC 60264-2-2
IS 14841-3-1 (pdf)2000Packaging of Winding Wires, Part 3: Taper Barrelled Delivery Spools, Section 1: Basic DimensionsIEC 60264-3-1
IS 14841-3-2 (pdf)
IS 14841-3-2 (txt)
2000Packaging of Winding Wires, Part 3: Taper Barrelled Delivery Spools, Section 2: Returnable Spools Made from Thermoplastic MaterialsIEC 60264-3-2
IS 14841-3-3 (pdf)
IS 14841-3-3 (txt)
2000Packaging of Winding Wires, Part 3: Taper Barrelled Delivery Spools, Section 3: Non-returnable Spools Made from Thermoplastic MaterialIEC 60264-3-3
IS 14841-3-4 (pdf)2000Packaging of Winding Wires, Part 3: Taper Barrelled Delivery Spools, Section 4: Basic Dimensions of Containers for Taper Barrelled Delivery SpoolsIEC 60264-3-4
IS 14841-4-1 (pdf)
IS 14841-4-1 (txt)
2000Packaging of Winding Wires, Part 4: Methods of Test, Section 1: Delivery Spools Made from Thermoplastic MaterialsIEC 60264-4-1

Last Updated: October 9, 2013