Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.
Division Name: Electrotechnical
Section Name: Electrical Apparatus for Explosive Atmosphere (ETD 22)
Standard | Year | Title | IBR |
---|---|---|---|
IS 4051 (pdf) | 1967 | Code of practice for installation and maintenance of electrical equipment in mines | |
IS 5571 (pdf) IS 5571 (txt) | 2009 | Guide for Selection and installation of Electrical Equipment for Hazardous Areas (other than mines) | IEC 60079-14 |
IS 5572 (pdf) IS 5572 (txt) | 2009 | Classification of hazardous areas (other than mines) having flammable gases and vapours for electrical installation | IEC 60079-10 |
IS 5679 (pdf) IS 5679 (txt) | 1986 | Miners' cap lamp assemblies (incorporating lead acid type batteries) | |
IS 7693 (pdf) IS 7693 (txt) | 2004 | Electrical Apparatus for Explosive Gas Atmospheres - Oil-Immersion 'o' | IEC 60079-6:1995 |
IS 7820 (pdf) IS 7820 (txt) | 2004 | Electrical Apparatus for Explosive Gas Atmospheres - Method of Test for Ignition Temperature | IEC 60079-4 |
IS 9559 (pdf) IS 9559 (txt) | 1980 | Guide for selection of electrical and electronic equipment for coal mines | |
IS 9570 (pdf) IS 9570 (txt) | 1980 | Classification of flammable gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents | IEC 60079--12 |
IS 9735 (pdf) IS 9735 (txt) | 2003 | Electrical Apparatus for Explosive Gas Atmospheres - Flmaeproof Enclosures 'd' - Method of Test for Ascertainment of Maximum Experimental Safe Gap | IEC 60097-1-1 |
IS 9836 (pdf) IS 9836 (txt) | 1981 | Exploders | |
IS 11064 (pdf) IS 11064 (txt) | 1984 | Guide for construction and use of rooms or buildings protected by pressurization for installation of electrical apparatus for explosive gas atmospheres | IEC 60079-13 |
IS 13408-1 (pdf) | 1992 | Code of Practice for the Selection, Installation and Maintenance of Electrical Apparatus for Use in Potentially Explosive Atmospheres (Other Than Mining Applictions or Explosives Processing and Manufacture), Part 1: General Recommendations | |
IS 14774-1 (pdf) IS 14774-1 (txt) | 2000 | Resistance Trace Heating in Potentially Explosive Atmospheres, Part 1: General and Testing Requirements | IEC 62086-1 |
IS 14774-2 (pdf) IS 14774-2 (txt) | 2000 | Resistance Trace Heating in Potentially Explosive Atmospheres, Part 2: Informative Application Guide for Design, Installation and Maintenance | IEC 62086-2 |
IS 15142 (pdf) IS 15142 (txt) | 2002 | Guide to the use of Electrical Apparatus for Potentially Explosive Atmospheres in the Presence of Combustible Dust | |
IS/IEC 60079-0 (pdf) IS/IEC 60079-0 (txt) | 2007 | Electrical apparatus for explosive gas atmospheres, Part 0: General Requirements | IEC 60079-0:2007 |
IS/IEC 60079-1 (pdf) IS/IEC 60079-1 (txt) | 2007 | Explosive Atmospheres, Part 1: Equipment Protection by Flameproof Enclosures 'd' | IEC 60079-1:2007 |
IS/IEC 60079-2 (pdf) IS/IEC 60079-2 (txt) | 2007 | Explosive protection by pressurized enclosure 'p' | IEC 60079-2:2007 |
IS/IEC 60079-5 (pdf) IS/IEC 60079-5 (txt) | 2007 | Explosive atmospheres, Part 5: Equipment protection by powder filling 'q' | IEC 60079-5:2007 |
IS/IEC 60079-6 (pdf) IS/IEC 60079-6 (txt) | 2007 | Explosive Atmospheres, Part 6: Equipment Protection by Oil Immersion '0: | IEC 60079-6:2007 |
IS/IEC 60079-7 (pdf) IS/IEC 60079-7 (txt) | 2006 | Explosive atmospheres, Part 7: Equipment protection by increased safety'e' | IEC 60079-7:2006 |
IS/IEC 60079-11 (pdf) IS/IEC 60079-11 (txt) | 2006 | Explosive atmospheres, Part 11: Equipment protection by intrinsic safety 'I' | IEC 60079-11:2006 |
IS/IEC 60079-15 (pdf) IS/IEC 60079-15 (txt) | 2005 | Electrical apparatus for explosive gas atmospheres, Part 15: Construcation, test and marking of type of protection 'n' electrical apparatus | IEC 60079-15:2005 |
IS/IEC 60079-16 (pdf) IS/IEC 60079-16 (txt) | 1990 | Electrical apparatus for expllsive gas atomospheres, Part 16: Artificial ventilation for the protection of analyzer(s) houses | IEC 60079-16:1990 |
IS/IEC 60079-17 (pdf) IS/IEC 60079-17 (txt) | 2007 | Explosive atmospheres, Part 17: Electrical installations inspection and maintenance | IEC 60079-17:2007 |
IS/IEC 60079-18 (pdf) IS/IEC 60079-18 (txt) | 2009 | Explosive Atmospheres, Part 18: Equipment Protection By Encapsulation 'm' | IEC 60079-18:2009 |
IS/IEC 60079-19 (pdf) IS/IEC 60079-19 (txt) | 2006 | Explosive atmospheres, Part 19: Repair, overhaul and reclaation | IEC 60079-19:2006 |
IS/IEC 60079-20-1 (pdf) IS/IEC 60079-20-1 (txt) | 2010 | Electrical appratus for explosive gas atmospheres, Part 20: Material Characteristics for Gas and Vapour Classification, Section 1: Test Methods and Data | IEC 60079-20-1:2010 |
IS/IEC 60079-20 (pdf) IS/IEC 60079-20 (txt) | 1996 | Electrical appratus for explosive gas atmospheres, Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus | IEC 60079-20:1996 |
IS/IEC 60079-25 (pdf) IS/IEC 60079-25 (txt) | 2003 | Electrical apparatus for explosive gas atmospheres, Part 25: Intrinsically safe systems | IEC 60079-25:2003 |
IS/IEC 60079-26 (pdf) IS/IEC 60079-26 (txt) | 2006 | Electrical apparatus for explosive gas atmospheres, Part 26: Equipment With Equipment Protection Level (EPL) Ga | IEC 60079-26:2006 |
IS/IEC 60079-28 (pdf) IS/IEC 60079-28 (txt) | 2006 | Electrical apparatus for explosive gas atmospheres, Part 28: Protection of Equipment and Transmission Systems Using Optical Radiation | IEC 60079-28:2006 |
IS/IEC 60079-29-1 (pdf) IS/IEC 60079-29-1 (txt) | 2007 | Explosive atmospheres, Part 29: Gas detectors, Section 1: Performance Requirements of Detectors for Flammable Gases | IEC 60079-29-1:20 |
IS/IEC 60079-29-2 (pdf) IS/IEC 60079-29-2 (txt) | 2007 | Exposive Atmospheres Part 29 Gas Detectors, Section 2: Selection, Use and Maintenance of Detectors for Flammable Gases andOxygen Explosive Atmospheres, Part 29: Gas Detectors, Section 2: Selection, Use and Maintenance of Detectors for Flammable Gases and Oxygen | IEC 60079-29-2:2007 |
IS/IEC 60079-30-1 (pdf) IS/IEC 60079-30-1 (txt) | 2007 | Explosive atmospheres, Part 30: Electrical Resistance Trace Heating, Section 1: General and Testing Requirement | IEC 60079-30-1 |
IS/IEC 60079-30-2 (pdf) IS/IEC 60079-30-2 (txt) | 2007 | Explosive atmospheres, Part 30: Electrical Resistance Trace Heating, Section 2: Application Guide for Design, Installation and Maintenance | IEC 60079-30-2 |
IS/IEC 60079-31 (pdf) IS/IEC 60079-31 (txt) | 2008 | Explosive atmospheres, Part 31: Equipment Dust Ignition Protection By Enclosure 't' | IEC 60079-31 |
IS/IEC 61241-0 (pdf) IS/IEC 61241-0 (txt) | 2004 | Electrical apoparatus for use in the presence of compustible dust, Part 0: General requirements | IEC 61241-0:2004 |
IS/IEC 61241-1 (pdf) IS/IEC 61241-1 (txt) | 2004 | Electrical apparatus for use in the presence of combustible dust, Part 1: Protection by enclosures 'tD' | IEC 61241-1:2004 |
IS/IEC 61241-2-1 (pdf) IS/IEC 61241-2-1 (txt) | 1994 | Electrical Apparatus for use in the Presence of Combustible Dust, Part 2: Test Methods, Section 1: Methods for Determining the Minium Ignition Temperatures | IEC 61241-2-1:1994 |
IS/IEC 61241-2-3 (pdf) IS/IEC 61241-2-3 (txt) | 1994 | Electrical Apparatus for use in the presence of combustible dust, Part 2: Test Methods ; Section 3 Method for determining minimum ignition engergy of dust/air mixtures | IEC 61241-2-3:1994 |
IS/IEC 61241-4 (pdf) IS/IEC 61241-4 (txt) | 2001 | Electrical Apparatus for Use in the Presence of Combustible Dust, Part 4: Type of Protection 'pD' | IEC 61241-4:2001 |
IS/IEC 61241-10 (pdf) IS/IEC 61241-10 (txt) | 2004 | Electrical apparatus for use in the presence of combustible dust, Part 10: Classification of areas where combustibe dusts are or may be present | IEC 61241-10:2004 |
IS/IEC 61241-11 (pdf) IS/IEC 61241-11 (txt) | 2005 | Electrical apparatus for use in the presence of combustible dust, Part 11: Protection by intrinsic safety 'ID' | IEC 61241-11:2005 |
IS/IEC 61241-14 (pdf) IS/IEC 61241-14 (txt) | 2004 | Electrical apparatus for use in the presence of combustible dust, Part 14: Selection and installation | IEC 61241-14:2004 |
IS/IEC 61241-18 (pdf) IS/IEC 61241-18 (txt) | 2004 | Electrical apparatus for use in the presence of combustible dust, Part 11: Protection by encapsulation 'mD' | IEC 61241-18:2004 |
Last Updated: September 6, 2013
↑