Divisional Index ↑

Public Safety Standards of the Republic of India

Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.

Division Name: Electrotechnical
Section Name: Solid Electrical Insulating Materials and Insulation Systems (ETD 2)

StandardYearTitleIBR
IS 1175 (pdf)
IS 1175 (txt)
1981Methods for Grading and Classification of Muscovite Mica Blocks, Thins and FilmsISO 67
IS 1271 (pdf)
IS 1271 (txt)
2012Electrical Insulation-Thermal evaluation and designationIEC 60085
IS 1576 (pdf)1992Solid pressboard for electrical purposes
IS 2259 (pdf)
IS 2259 (txt)
1963Methods of test for determination of insulation resistance of solid insulating materialsIEC 60167
IS 2260 (pdf)
IS 2260 (txt)
1973Preconditioning, conditioning and testing of solid electrical insulating materials
IS 2448-1 (pdf)
IS 2448-1 (txt)
1963Adhesive insulating tapes for electrical purposes, Part 1: Tapes with cotton textile substrates
IS 2464 (pdf)1963Built-up mica for electrical purposes
IS 2584 (pdf)1963Method of test for electric strength of solid insulating materials at power frequencies
IS 2824 (pdf)
IS 2824 (txt)
2007Method for determining of the proof and the comparative tracking indices of solid insulating materialsIEC 60112
IS 3352 (pdf)1965Varnished cotton cloth and tape for electrical purposes
IS 3396 (pdf)
IS 3396 (txt)
1979Methods of test for volume and surface resistivities of solid electrical insulating materials
IS 4248 (pdf)
IS 4248 (txt)
1967Non-ignitable and self-extinguishing boards (with mineral base) for electrical purposes
IS 4249 (pdf)1967Classification and methods of tests for non-ignitable and self-extinguishing properties of solid electrical insulating materials
IS 4486 (pdf)
IS 4486 (txt)
1967Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
IS 4819 (pdf)
IS 4819 (txt)
1968Thin Vulcanized Fibre Sheet (Including Leatheroid) for Electrical Purposes
IS 4820 (pdf)
IS 4820 (txt)
1968Vulcanized fibre sheets for electrical purposes - Specification
IS 5596 (pdf)
IS 5596 (txt)
1970Method of test for determining deleterious substances in fibrous insulating materials
IS 5711 (pdf)
IS 5711 (txt)
1970Vulcanized fibre rods and tubes for electrical purposes
IS 6230 (pdf)
IS 6230 (txt)
1970Woven asbestos tape for electrical insulating purposes
IS 7084 (pdf)1973Bitumen based filling compounds for electrical purposes
IS 7571 (pdf)
IS 7571 (txt)
1974Methods of tests for ceramic for telecommunication and allied purposes
IS 7755 (pdf)
IS 7755 (txt)
1975High tension insulating cotton tape impregnated with bitumen based compound
IS 7809-1 (pdf)
IS 7809-1 (txt)
1975Pressure sensitive adhesive tapes for electrical purposes, Part 1: General requirementsIEC 60454-1
IS 7809-2 (pdf)
IS 7809-2 (txt)
1977Pressure sensitive adhesive tapes for electrical purposes, Part 2: Methods of testIEC 60454-2
IS 7809-3-1 (pdf)
IS 7809-3-1 (txt)
1986Pressure Sensitive Adhesive Insulating Tapes for Electrical Purposes, Part 3: Requirements for Individual Materials, Section 1: Plasticized Polyvinylchloride Tapes with Non-Thermosetting AdhesiveIEC 60454-2
IS 7809-3-2 (pdf)
IS 7809-3-2 (txt)
1981Pressure sensitive adhesive tapes for electrical purposes, Part 3: Specifications for individual materials, Section 2: Requirements for polyester film tapes (PETP) with thermosetting adhesive
IS 7809-3-3 (pdf)1981Pressure sensitive adhesive tapes for electrical purposes, Part 3: Specifications for individual materials, Section 3: Polyester film tapes (PETP) with non-thermosetting adhesive
IS 7809-3-4 (pdf)
IS 7809-3-4 (txt)
1977Pressure sensitive adhesive tapes for electrical purposes, Part 3: Specifications for individual materials, Section 4: Cellulosic paper, creped with thermosetting adhesive
IS 7809-3-5 (pdf)
IS 7809-3-5 (txt)
1977Pressure sensitive adhesive tapes for electrical purposes, Part 3: Specifications for individual materials, Section 5: Cellulosic paper with thermosetting adhesive
IS 8504-1 (pdf)
IS 8504-1 (txt)
1994Guide for determination of thermal endurance properties of electrical insulating materials, Part 1: General Guidelines for ageing Procedures, Evaluation of Test ResultsIEC 216-1
IS 8504-2 (pdf)
IS 8504-2 (txt)
1983Guide for determination of thermal endurance properties of electrical insulating materials, Part 2: List of materials and available testsIEC 216-2
IS 8504-3 (pdf)
IS 8504-3 (txt)
1994Guide for determination of thermal endurance properties of electrical insulating materials, Part 3: Statistical methodsIEC 60216-3
IS 8504-4 (pdf)
IS 8504-4 (txt)
1994Guide for determination of thermal endurance properties of electrical insulating materials, Part 4: Instructions for calculating the Thermal Endurance ProfileIEC 60216-3
IS 8504-5-2 (pdf)
IS 8504-5-2 (txt)
2012Electrical Insulating Materials - Termal Endurance Properties, Part 5: Ageing Ovens, Section 2: Precision Ovens for Use Up to 300 Degrees CIEC 60216-4-2:2000
IS 8504-5-3 (pdf)
IS 8504-5-3 (txt)
2012Electrical Insulating Materials - Termal Endurance Properties, Part 5: Ageing Ovens, Section 3: Multi-chamber OvensIEC 60216-4-3:2000
IS 8504-6 (pdf)
IS 8504-6 (txt)
2012Electrical Insulating Materials - Termal Endurance Properties, Part 6: Determination of Relative Thermal Endurance Index (RTE) of Insulating MaterialIEC 60216-5:2008
IS 8504-7 (pdf)
IS 8504-7 (txt)
2012Electrical Insulating Materials - Termal Endurance Properties, Part 7: Determination of Thermal Endurance Indices (TI and RTE) of an Insulating Material Using the Fixed Time Frame MethodIEC 60216-6:2006
IS 8516 (pdf)
IS 8516 (txt)
2011ELECTRICAL INSULATING MATERIALS - DETERMINATION OF ELECTROLYTIC CORROSION CAUSED BY INSULATING MATERIALS - TEST METHODSIEC 60426:2007
IS 8570 (pdf)
IS 8570 (txt)
1977Presspaper for Electrical Purposes
IS 9043 (pdf)
IS 9043 (txt)
1979Method for grading (by size) of phlogopite mica blocks, thins and splittingsISO 444
IS 9044 (pdf)1979Method of Measuring Thickness of Mica Blocks, Thins, Films and SplittingsISO 5972
IS 9045 (pdf)1979Thermal classification of phlogopite mica splittingsISO 5023
IS 9299-1 (pdf)
IS 9299-1 (txt)
1979Insulating materials based on built-up mica or treated mica paper, Part 1: Definitions and general requirementsIEC 60371-1
IS 9299-2 (pdf)
IS 9299-2 (txt)
1992Insulating materials based on built-up mica or treated mica paper, Part 2: Methods of testIEC 60371-1
IS 9299-3-1 (pdf)
IS 9299-3-1 (txt)
1979Insulating materials based on built-up mica or treated mica paper, Part 3: Specifications for individual materials, Section 1: Rigid Mica Materials for Commutators Separators
IS 9299-3-2 (pdf)
IS 9299-3-2 (txt)
1982Insulating materials based on built-up mica or treated mica paper, Part 3: Specifications for individual materials, Section 2: Moulding mica materials for electrical purposes
IS 9299-3-3 (pdf)
IS 9299-3-3 (txt)
1982Insulating materials based on built-up mica or treated mica paper, Part 3: Specifications for individual materials, Section 3: Flexible mica flake tape for insulation of electrical machines
IS 9299-3-4 (pdf)
IS 9299-3-4 (txt)
1982Insulating materials based on built-up mica or treated mica paper, Part 3: Specifications for individual materials, Section 4: Rigid mica materials for heating equipment
IS 9299-3-5 (pdf)
IS 9299-3-5 (txt)
1992Insulating materials based on built up mica or treated mica paper, Part 3: individual materials, Section 5, Flexible mica materials in sheet form
IS 9299-3-6 (pdf)
IS 9299-3-6 (txt)
1993Insulating Materials Based on Built-up Mica or Treated Mica Paper, Part 3: Specifications for Individual Materials, Section 6: Glass Backed Mica Paper With B-Stage Epoxy Resin Bond
IS 9299-3-7 (pdf)
IS 9299-3-7 (txt)
1992Insulating materials based on built-up mica or treated mica paper, Part 3: individual material, Section 7: Mica paper
IS 9335-1 (pdf)1979Cellulosic papers for electrical purposes, Part 1: Definitions and general requirementsIEC Pub 60554-1
IS 9335-2 (pdf)1998Cellulosic Papers for Electrical Purposes, Part 2: Methods of testIEC Pub 554-2
IS 9335-3-1 (pdf)1984Cellulosic papers for electrical purposes, Part 3: Specifications for individual materials, Section 1: General purposes electrical paperIEC Pub 554-3-1
IS 9335-3-2 (pdf)
IS 9335-3-2 (txt)
1985Cellulosic papers for electrical purposes, Part 3: Specifications for individual materials, Section 2: Capacitor paperEC Pub 554-3-2
IS 9335-3-3 (pdf)
IS 9335-3-3 (txt)
1984Cellulosic papers for electrical purposes, Part 3: Specifications for individual materials, Section 3: Crepe paperIEC Pub 554-3-3
IS 9335-3-4 (pdf)1984Cellulosic papers for electrical purposes, Part 3: Specifications for individual materials, Section 4: Electrolytic capacitor paperIEC Pub 554-3-4
IS 9335-3-5 (pdf)1985Cellulosic papers for electrical purposes, Part 3: Specifications for individual materials, Section 5: Special papersIEC Pub 554-3-5
IS 9455 (pdf)
IS 9455 (txt)
1980Classification of muscovite mica blocks, thins and films based on electrical properties
IS 9502 (pdf)
IS 9502 (txt)
1980Muscovite mica components for electronic equipment
IS 9947 (pdf)
IS 9947 (txt)
2011Electrical insulating materials used under severe ambient conditions - Test Methods for evaluating resistance to tracking and erosion
IS 10026-1 (pdf)1998Insulating varnishes containing solvents, Part 1: Definitions and general requirementsIEC Pub 60464-1
IS 10026-2 (pdf)
IS 10026-2 (txt)
1999Insulating Varnishes Containing Solvents, Part 2: Methods of TestsIEC Pub 60464-2
IS 10026-3-1 (pdf)1999Insulating Varnishes Containing Solvents, Part 3: Specifications for Individual Materials, Section 1: Requirements for Cold Curing Finishing VarnisIEC Pub 60464-3-1
IS 10026-3-2 (pdf)1999Insulating varnishes containing solvents, Part 3: Specifications for individual materials, Section 2: Requirements for Hot Curing VarnishesIEC Pub 60464-3-2
IS 10026-3-3 (pdf)
IS 10026-3-3 (txt)
1983Insulating Varnishes Containing Solvents, Part 3: Specifications for Individual Materials, Section 3: Air Drying Varnishes with Temperature Index 130
IS 10026-3-4 (pdf)1983Insulating varnishes containing solvents, Part 3: Specifications for individual materials, Section 4: Baking varnishes with temperature index 120
IS 10026-3-5 (pdf)1983Insulating varnishes containing solvents, Part 3: Specifications for individual materials, Section 5: Baking varnishes with temperature index 130
IS 10026-3-6 (pdf)1983Insulating Varnishes Containing Solvents, Part 3: Specifications for Individual Materials, Section 6: Baking Varnishes with Temperature Index 155
IS 10026-3-7 (pdf)1983Insulating varnishes containing solvents, Part 3: Specifications for individual materials, Section 7: Baking varnishes with temperature index 180
IS 10026-3-8 (pdf)
IS 10026-3-8 (txt)
1986Insulating varnishes containing solvents, Part 3: Specifications for individual materials, Section 8: Baking varnishes with temperature index 200
IS 10026-3-9 (pdf)
IS 10026-3-9 (txt)
1986Insulating varnishes containing solvents, Part 3: Specifications for individual materials, Section 9: Baking varnishes with temperature index 130 for magnetic core sheets
IS 10163-1 (pdf)
IS 10163-1 (txt)
1982Recommended methods of tests for the determination of dielectric properties of insulating materials at frequencies above 300 MHz, Part 1: GeneralIEC 60377-1
IS 10192 (pdf)1982Synthetic resin bonded glass fibre (SRBGF) sheets for electrical purposes
IS 10333 (pdf)
IS 10333 (txt)
1982Epoxy resin systems for cast resin insulated power and control cable joints and terminations up to and including 11 kV
IS 10581 (pdf)
IS 10581 (txt)
1983Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquidsIEC 60589
IS 11182-1 (pdf)
IS 11182-1 (txt)
1984Guide for evaluation of insulation systems of electrical equipment, Part 1: Identification, evaluation and ageing mechanismsIEC 60611
IS 11182-2 (pdf)
IS 11182-2 (txt)
1984Guide for the Evaluation of Insulation Systems of Electrical Equipment, Part 2: Thermal Endurance Test ProceduresIEC 60611
IS 11182-3-1 (pdf)
IS 11182-3-1 (txt)
1986Guide for the evaluation of insulation systems of electrical equipment, Part 3: Electrical endurance test procedures, Section 1: General considerations and evaluation procedures based on normal distributionsIEC 60727-1
IS 11182-3-2 (pdf)
IS 11182-3-2 (txt)
1996Guide for evaluation of insulation systems of electrical equipments, Part 3: Electrical endurance test procedures, Section 2: evaluation procedure based on extreme value distributionIEC 60727-3
IS 11182-5 (pdf)
IS 11182-5 (txt)
1993Guide for evaluation of insulation system of electrical equipment, Part 5: Mechanical endurance functional testsIEC Pub 941
IS 11182-6 (pdf)
IS 11182-6 (txt)
1986Guide for the evaluation of insulation systems of electrical equipment, Part 6: Performance evaluation based on service experience and functional tests
IS 11182-7-1 (pdf)
IS 11182-7-1 (txt)
1986Guide for the Evaluation of Insulation Systems of Electrical Equipment, Part 7: Multi-factor Functional Testing, Section 1: Test Procedures
IS 11221 (pdf)
IS 11221 (txt)
1984Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface dischargesIEC 60343
IS 11256-1 (pdf)
IS 11256-1 (txt)
1985Method of test for determination of thermal endurance of insulating varnishes, Part 1: Electric strength methodIEC 60370
IS 11256-2 (pdf)
IS 11256-2 (txt)
1985Method of test for determination of thermal endurance of insulating varnishes, Part 2: Measurement of loss of mass
IS 11256-3 (pdf)
IS 11256-3 (txt)
1985Methods of test for determination of thermal endurance of insulating varnishes, Part 3: Bond strength by helical coil methodIEC 60290
IS 11297-1 (pdf)
IS 11297-1 (txt)
1985Varnished fabrics for electrical purposes, Part 1: Definitions and general requirements
IS 11297-2 (pdf)
IS 11297-2 (txt)
1988Varnished fabrics for electrical purposes, Part 2: Methods of tests
IS 11297-3-1 (pdf)1988Varnished fabrics for electrical purposes, Part 3: Specifications for individual materials, Section 1: Glass fabric backed varnished fabrics
IS 11298-1 (pdf)
IS 11298-1 (txt)
1985Plastic films for electrical purposes, Part 1: Definitions and general requirementsIEC 60674-1
IS 11298-2 (pdf)
IS 11298-2 (txt)
1999Plastic films for electrical purposes, Part 2: Methods of testIEC 674-2
IS 11298-3-1 (pdf)
IS 11298-3-1 (txt)
1991Plastic films for electrical purposes, Part 3: Specifications for individual materials, Section 1: Polypropylene films for capacitors
IS 11298-3-2 (pdf)1990Plastic films for electrical purposes, Part 3: Specifications for individual materials, Section 2: Metallized polypropylene films
IS 11298-3-3 (pdf)
IS 11298-3-3 (txt)
1998Plastic films for electrical purposes, Part 3: Specifications for individual materials, Section 3: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulationIEC 674-3-2
IS 11298-3-4 (pdf)
IS 11298-3-4 (txt)
1998Plastic films for electrical purposes, Part 3: Specifications for individual materials, Section 4: Requirements for polyicarbonate (PC) films used for electrical insulationIEC 674-3-3
IS 11298-3-5 to 7 (pdf)
IS 11298-3-5 to 7 (txt)
1998Plastic films for electrical purposes, Part 3: Specifications for individual materials, Section 5-7: Requirements for Polyimide Films Used for Electrical InsulationIEC 674-3-4 to 6:1993
IS 11298-3-8 (pdf)
IS 11298-3-8 (txt)
1998Plastic films for electrical purposes, Part 3: Specifications for individual materials, Section 8: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulationIEC 674-3-7
IS 11654-1 (pdf)
IS 11654-1 (txt)
1986Flexible insulating sleeving, Part 1: Definitions and general requirementsIEC 60684-1
IS 11654-2 (pdf)
IS 11654-2 (txt)
1986Flexible insulating sleeving, Part 2: Methods of tests
IS 11654-3-1 (pdf)
IS 11654-3-1 (txt)
1988Flexible Insulating Sleeving, Part 3: Specifications for Individual Types of Sleevings, Section 1: General Purpose Grade Sleeving with Temperature Index 90
IS 11654-3-103 (pdf)
IS 11654-3-103 (txt)
1989Flexible insulating sleeving, Part 3: Specifications for individual types of sleevings, Section 103: General purpose grade sleeving with unilateral tolerances with temperature index 90
IS 11654-3-403 (pdf)
IS 11654-3-403 (txt)
1989Flexible insulating sleeving, Part 3: Specifications for individual type of sleeving, Section 403: Glass textile sleeving coated with acrylic based coating high breakdown strength
IS 11654-3-404 (pdf)
IS 11654-3-404 (txt)
1989Flexible insulating sleeving, Part 3: Specifications for individual types of sleevings, Section 404: Glass textile sleeving coated with acrylic based coating medium breakdown strength
IS 11654-3-405 (pdf)
IS 11654-3-405 (txt)
1989Flexible insulating sleeving, Part 3: Specifications for individual types of sleevings, Section 405: Glass textile sleeving coated acrylic based coating lower
IS 11654-3-406 (pdf)
IS 11654-3-406 (txt)
1989Flexible insulating sleeving, Part 3: Specifications for individual type of sleevings, Section 406: Glass textile sleeving with PVC based coating high breakdown strength
IS 11654-3-407 (pdf)
IS 11654-3-407 (txt)
1989Flexible insulating sleeving, Part 3: Specifications for individual type of sleevings, Section 407: Glass textile sleeving with PVC based coating medium breakdown strength
IS 11654-3-408 (pdf)1989Flexible insulating sleeving, Part 3: Specifications for individual type of sleevings, Section 408: Glass textile sleeving with PVC based coating-lower breakdown strength
IS 11731-1 (pdf)
IS 11731-1 (txt)
1986Methods of test for determination of the flammability of solid electrical insulating materials when exposed to an igniting source, Part 1: Horizontal specimen methodIEC 60107
IS 11731-2 (pdf)
IS 11731-2 (txt)
1986Methods of Test for Determination of Flammability of Solid Electrical Insulating Materials When Exposed to An Igniting Source, Part 2: Vertical Specimen MethodIEC 60707
IS 11755 (pdf)
IS 11755 (txt)
1986Method of test for the determination of electrical resistance and resistivity of insulating materials at elevated temperaturesIEC 60345
IS 11756 (pdf)
IS 11756 (txt)
1986Method of test for co-efficients of friction of plastic film and sheeting for use as electrical insulationIEC 60648
IS 12316-1 (pdf)1988Non-cellulosic papers for electrical purposes, Part 1: Definitions and general requirements
IS 12316-2 (pdf)
IS 12316-2 (txt)
1988Non-cellulosic papers for electrical purposes, Part 2: Methods of test
IS 12316-3-1 (pdf)1988Non-cellulosic Papers for Electrical Purposes, Part 3: Requirements for Individual Materials, Section 1: Unfilled Aramid (Aromatic Polyamide) Papers Calendered
IS 12316-3-2 (pdf)1988Non-cellulosic papers for electrical purposes, Part 3: Requirements for individul materials, Section 2: Unfilled aramid (Aromatic Polyamide) Paper, uncalendered
IS 12317-1 (pdf)1988Ceramic and glass insulating materials for telecommunication and allied purposes, Part 1: General requirements and classification of ceramic and glass insulating materialsIEC 60672-1
IS 12747-1 (pdf)
IS 12747-1 (txt)
2011Combined Flexible Materials for Electrical Insulation, Part 1: Definitions and General RequirementsIEC 60626-1:1979
IS 12747-2 (pdf)
IS 12747-2 (txt)
2012Combined flexible materials for electrical insulation, Part 2: Methods of testEC 60626-2:2009
IS 12747-3 (pdf)
IS 12747-3 (txt)
1998Combined flexible materials for electrical insulation, Part 3: Specifications for individual materialsIEC 626-3
IS 13066 (pdf)
IS 13066 (txt)
1991Prepreg based on glass woven fabric for electrical applications
IS 13233 (pdf)1991Low Voltage High Current Arc Resistance Test - Method of Test
IS 13335 (pdf)1992Muscovite mica scrap for mica paper
IS 13357 (pdf)
IS 13357 (txt)
1992Methods of grading and visual classification of muscovite mica splittings
IS 13465-1 (pdf)
IS 13465-1 (txt)
2005Solventless Polymerisable Resinous Compounds Used for Electrical Insulation, Part 1: Definitions and General RequirementsIEC 60455-1
IS 13465-2 (pdf)
IS 13465-2 (txt)
2005Resin based reactive compounds used for electrical insulation, Part 2: Methods of testIEC 60455-2
IS 13465-3-1 (pdf)2006Resin based reactive compounds used for electrical insulation, Part 3: Specifications for individual materials ; Section 1 Unfilled epoxy Resinous CompoundsIEC 60455-3-1
IS 13465-3-2 (pdf)2006Resin based reactive compounds used for electrical insulation, Part 3: Specifications for individual materials ; Section 2 Qiartz filled epoxy resinous compoundsIEC 60455-3-2
IS 13465-3-3 (pdf)2006Resin based reactive compounds used for electrical insulation, Part 3: Specifications for individual materials ; Section 3 Unfilled polyurethane compoundsIEC 60455-3-3
IS 13465-3-4 (pdf)2006Resin based reactive compounds used for electrical insulation, Part 3: Specifications for individual materials ; Section 4 Filled polyurethane compoundsIEC 60455-3-4
IS 13465-3-5 (pdf)1998Solventless Polymerisable Resinous Compounds Used for Electrical Insulation, Part 3: Specifications for Individual Materials, Section 5: Epoxy Phenol Novolac Resin
IS 13465-3-6 (pdf)
IS 13465-3-6 (txt)
2006Resin Based reactive compounds used for electrical insulation, Part 3: Specifications for individual materials ; Section 6 Unsaturated polyester based impregnating resinsIEC 60455 -3 - 5
IS 13508 (pdf)1992Test Procedure for Measurement of Loss Tangent Angle of Coils and Bars for Machine Winding - GuideIEC 60894
IS 13884 (pdf)1993Muscovite Mica Flakes and Mica Powder for Industrial Applications
IS 14353 (pdf)
IS 14353 (txt)
1996Guide for determining compatibility between enamelled winding wires and impregnating compounds
IS 14672 (pdf)
IS 14672 (txt)
1999Method of Test for High Voltage Low Current Dry Arc Resistance of Solid Electrical Insulation
IS 15208 (pdf)
IS 15208 (txt)
2002Unidirectional Non-Woven Semi-Cured Glass Fibre Tape
IS 15218-1 (pdf)
IS 15218-1 (txt)
2002Electrical Insulating Materials - Determination of the Effects of Ionizing Radiation, Part 1: Radiation Interaction and Dosimetry
IS 15652 (pdf)
IS 15652 (txt)
2006Insulating mats for electrical purposesIEC 61111
IS/IEC 60371-1 (pdf)
IS/IEC 60371-1 (txt)
2003Specification for Insulating Materials Based on Mica, Part 1: Definitions and General RequirementsIEC 60371-1:2003
IS/IEC 60371-2 (pdf)
IS/IEC 60371-2 (txt)
2004Specification for Insulating Materials Based on MICA, Part 2: Methods of TestIEC 60371-2:2004
IS/IEC 60371-3-1 (pdf)
IS/IEC 60371-3-1 (txt)
2003Specification for insulating materials based on mica, Part 3 Specification for individual materials, Section 1: Commutator Separators and materialsIEC 60371-3-1
IS/IEC 60371-3-2:2005 (pdf)
IS/IEC 60371-3-2:2005 (txt)
2005Specification for Insulating Materials Based on MICA, Part 3 Specification for Individual Materials, Section 2: Mica PaperIEC 60371-3-2:2005:2005
IS/IEC 60371-3-4 (pdf)
IS/IEC 60371-3-4 (txt)
1992Specification for insulating materials based on MICA, Part 3 Specifications for individual materials, Section 4: Polyester film-backed mica paper with a B-stage epoxy resin binderIEC 60371-3-4
IS/IEC 60371-3-5:2005 (pdf)
IS/IEC 60371-3-5:2005 (txt)
2005Specification for Insulating Materials Based on MICA, Part 3 Specification for Individual Materials, Section 5: Glass-Backed Mica Paper with an Epoxy Resin Binder for Post - Impregnation (VPI)IEC 60371-3-5:2005
IS/IEC 60371-3-6 (pdf)
IS/IEC 60371-3-6 (txt)
1992Specification for Insulating Materials based on MICA, Part 3 Specifications for Individual Materials, Section 6: Glass -backed Mica Paper with a B-stage Epoxy Resin BinderIEC 60371-3-6:199
IS/IEC 60371-3-7 (pdf)
IS/IEC 60371-3-7 (txt)
1995Insulating Materials Based on MICA, Part 3: Specification for Individual Materials, Section 7: Polyester Film Mica Paper with an Epoxy Resin Binder for Single Conductor TapingIEC 60371-3-7:1995
IS/IEC 60371-3-8 (pdf)
IS/IEC 60371-3-8 (txt)
1995Insulating Materials Based on MICA, Part 3: Specification for Individual Materials, Section 8: Mica Paper Tapes for Flame - Resistant Security CablesIEC 60371-3-8:1995
IS/IEC 60371-3-9:1995 (pdf)
IS/IEC 60371-3-9:1995 (txt)
1995Specification for Insulating Materials Based on MICA, Part 3: Specification for Individual Materials, Section 9: Moulding MicaniteIEC 60371-3-9:1995

Last Updated: September 6, 2013