Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.

Division Name: Civil Engineering

Section Name: Structural Engineering and structural sections (CED 7)

Standard | Year | Title | IBR |
---|---|---|---|

IS 800 (pdf) IS 800 (txt) | 2007 | General Construction In Steel - Code of Practice | |

IS 801 (pdf) IS 801 (txt) | 1975 | Code of Practice for Use of Cold Formed Light Gauge Steel Structural Members In General Building Construction | |

IS 802-1-1 (pdf) IS 802-1-1 (txt) | 1995 | Code of Practice for Use of Structural Steel In Overhead Transmission Line Towers, Part 1 Materials, Loads and Permissible Stresses, Section 1: Materials and Loads | |

IS 802-1-2 (pdf) IS 802-1-2 (txt) | 1992 | Code of Practice for Use of Structural Steel In Overhead Transmission Line Towers, Part 1: Material, Loads and Permissible Stress, Section 2: Permissible Stress | |

IS 802-2 (pdf) IS 802-2 (txt) | 1978 | Code of Practice for Use of Structural Steel in Overhead Transmission Line Towers, Part 2: Fabrication, Galvanizing, Inspection and Packing | |

IS 802-3 (pdf) IS 802-3 (txt) | 1978 | Code of Practice for Use of Structural Steel In Overhead Transmission Line Towers, Part 3 Testing | |

IS 803 (pdf) IS 803 (txt) | 1976 | Code of Practice for Design Fabrication and Erection of Vertical Mild Steel Cylindrical Welded Oil Storage Tanks | |

IS 804 (pdf) IS 804 (txt) | 1967 | Rectangular Pressed Steel Tanks - | |

IS 805 (pdf) IS 805 (txt) | 1968 | Code of Practice for Use of Steel in Gravity Water Tanks | |

IS 806 (pdf) IS 806 (txt) | 1968 | Code of Practice for Use of Steel Tubes In General Building Construction | |

IS 808 (pdf) IS 808 (txt) | 1989 | Dimensions for Hot Rolled Steel Beam, Column, Channel and Angle Sections | |

IS 811 (pdf) IS 811 (txt) | 1987 | Cold Formed Light Gauge Structural Steel Sections - | |

IS 1173 (pdf) IS 1173 (txt) | 1978 | Hot rolled and slit steel tee bars | |

IS 1252 (pdf) IS 1252 (txt) | 1991 | Hot rolled steel bulb angles Dimensions | |

IS 1730 (pdf) IS 1730 (txt) | 1989 | Dimensions for steel plates,sheets strips and flats for general engineering purposes | |

IS 1732 (pdf) | 1989 | Steel Bars round and square for structural and general engineering purposes | |

IS 1852 (pdf) IS 1852 (txt) | 1985 | Rolling and cutting tolerances for hot rolled steel products | |

IS 1863 (pdf) IS 1863 (txt) | 1979 | rolled steel bulb flats - | ISO 657-19 |

IS 1864 (pdf) IS 1864 (txt) | 1979 | Hot-rolled steel L-sections for shipbuilding - | ISO 657-18 |

IS 2314 (pdf) IS 2314 (txt) | 1986 | Steel Sheet Piling Sections | |

IS 2713-1 to 3 (pdf) IS 2713-1 to 3 (txt) | 1980 | Tubular Steel Poles for Overhead Power Lines | |

IS 2750 (pdf) IS 2750 (txt) | 1964 | Steel Scaffoldings | |

IS 3443 (pdf) IS 3443 (txt) | 1980 | Crane rail sections - | |

IS 3908 (pdf) IS 3908 (txt) | 1986 | Aluminium equal leg angles | |

IS 3909 (pdf) IS 3909 (txt) | 1986 | Aluminium Unequal Leg Angles | |

IS 3921 (pdf) IS 3921 (txt) | 1985 | Aluminium channels - | |

IS 3954 (pdf) | 1991 | Hot Rolled Steel Channel Sections for General Engineering Purposes - Dimensions | |

IS 3964 (pdf) IS 3964 (txt) | 1980 | Light rails - | |

IS 4000 (pdf) IS 4000 (txt) | 1992 | Code of practice for high strength bolts in steel structures | |

IS 4014-1 (pdf) IS 4014-1 (txt) | 1967 | Code of practice for steel tubular scaffolding, Part 1: Definitions and materials | |

IS 5384 (pdf) IS 5384 (txt) | 1985 | Aluminium I-beam - | |

IS 5488 (pdf) IS 5488 (txt) | 1987 | Dimensions and dimensional tolerances for hot rolled steel plates for ship's hull structure | |

IS 6445 (pdf) IS 6445 (txt) | 1985 | Aluminium tee-sections - | |

IS 6449 (pdf) IS 6449 (txt) | 1987 | Aluminium bulb angles for marine application - | |

IS 6475 (pdf) IS 6475 (txt) | 1987 | Aluminium tee bars for marine application - | |

IS 6476 (pdf) IS 6476 (txt) | 1987 | Aluminium bulb plates for marine application - | |

IS 6533-1 (pdf) IS 6533-1 (txt) | 1989 | Code of practice for design and construction of steel chimneys, Part 1: Mechanical aspects | |

IS 6533-2 (pdf) IS 6533-2 (txt) | 1989 | Code of practice for design and construction of steel chimneys, Part 2: Structural aspects | |

IS 7205 (pdf) IS 7205 (txt) | 1974 | Safety code for erection of Structural Steelwork | |

IS 7215 (pdf) IS 7215 (txt) | 1974 | Tolerances for fabrication of steel structures | |

IS 7452 (pdf) IS 7452 (txt) | 1990 | Specification for hot-rolled steel sections for doors, windows and ventilators | |

IS 8081 (pdf) IS 8081 (txt) | 1976 | slotted sections | |

IS 8147 (pdf) IS 8147 (txt) | 1976 | Code of Practice for Use of Aluminium Alloys in Structures | |

IS 8640 (pdf) IS 8640 (txt) | 1977 | Recommendations for dimensional parameters for industrial building | |

IS 9178-1 (pdf) IS 9178-1 (txt) | 1979 | Criteria for Design of Steel Bins for Storage of Bulk Materials, Part 1: General Requirements and Assessment of Loads | |

IS 9178-2 (pdf) IS 9178-2 (txt) | 1979 | Criteria for Design of Steel Bins for Storage of Bulk Materials, Part 2: Design Criteria | |

IS 9178-3 (pdf) IS 9178-3 (txt) | 1980 | Criteria for Design of Steel Bins for Storage of Bulk Materials, Part 3: Bins Designed for Mass Flow and Funnel Flow | |

IS 9964-1 (pdf) IS 9964-1 (txt) | 1981 | Recommendations for maintenance and operation of petroleum storage tanks, Part 1: Preparation of tanks for safe entry and work | |

IS 9964-2 (pdf) IS 9964-2 (txt) | 1981 | Recommendations for Maintenance and Operation of Petroleum Storage Tanks, Part 2: Inspection | |

IS 10182-1 (pdf) IS 10182-1 (txt) | 1982 | Dimensions and Tolerances for Hot Rolled Track Shoe Sections, Part I: Section TS-L1 | |

IS 10182-2 (pdf) IS 10182-2 (txt) | 1985 | Dimensions and tolerances for hot-rolled track shoe sections, Part 2: Section TS-H1 | |

IS 10987 (pdf) IS 10987 (txt) | 1992 | Code of practice for design, fabrication, testing and installation of underground/above ground horizontal cylindrical storage tanks for petroleum products | |

IS 12778 (pdf) IS 12778 (txt) | 2004 | Hot Rolled Parallel Flange Steel Sections for Beams, Columns and Bearing Piles - Dimensions and Section Properties | |

IS 12779 (pdf) | 1989 | Rolling and cutting tolerances for hot rolled parallel flange beam and column sections | |

IS 12843 (pdf) IS 12843 (txt) | 1989 | Tolerances for erection of steel structures | |

IS 15663-1 (pdf) IS 15663-1 (txt) | 2006 | Design and installation of natural gas pipelines - Code of Practice, Part 1: Laying of pipelines | |

IS 15663-2 (pdf) IS 15663-2 (txt) | 2006 | Design and installation of natural gas pipelines - Code of Practice, Part 2: Laying of pipelines in crossings | |

IS 15663-3 (pdf) IS 15663-3 (txt) | 2006 | Design and installation of natural gas pipelines - Code of Practice : Part 3 Pre-commissioning and commissioning of pipelines | |

SP 6-1 (pdf) SP 6-1 (txt) | 1964 | ISI Handbook for Structural Engineers -Part- 1 Structural Steel Sections | |

SP 6-2 (pdf) SP 6-2 (txt) | 1962 | ISI Handbook for Structural Engineers -Part- 2 Steal Beams and Plate Girders | |

SP 6-3 (pdf) SP 6-3 (txt) | 1962 | ISI Handbook for Structural Engineers -Part- 3 Steel Columns and Struts | |

SP 6-4 (pdf) SP 6-4 (txt) | 1969 | ISI Handbook for Structural Engineers -Part- 4 Use of High Strength Friction Grip Bolts | |

SP 6-5 (pdf) SP 6-5 (txt) | 1980 | Handbook for Structural Engineers -Part- 5 Cold-Formed, Light-Gauge Steel Structures | |

SP 6-6 (pdf) SP 6-6 (txt) | 1972 | Handbook for Structural Engineers -Part- 6 Application of Plastic Theory In Design of Steel Structures | |

SP 6-7 (pdf) SP 6-7 (txt) | 1972 | Handbook for Structural Engineers -Part- 7: Simple Welded Girders |

Last Updated: December 21, 2016

↑