Made available to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them.
Division Name: Civil Engineering
Section Name: Plastic Piping System (CED 50)
| Standard | Year | Title | IBR |
|---|---|---|---|
| IS 4984 (pdf) IS 4984 (txt) | 1995 | high density polyethylene pipes for potable water supplies | |
| IS 4985 (pdf) IS 4985 (txt) | 2000 | Unplasticized PVC Pipes for Potable Water Supplies - | |
| IS 7634-1 (pdf) IS 7634-1 (txt) | 1975 | Code of practice for plastic pipes work for potable water supplies, Part 1: Choice of materials and general recommendations | |
| IS 7634-2 (pdf) IS 7634-2 (txt) | 2012 | Plastics Pipes Selection, Handling, Storage and Installation for Potable Water Supplies - Code of Practice, Part 2: Laying and jointing of polyethylene (PE) pipes | |
| IS 7634-3 (pdf) IS 7634-3 (txt) | 2003 | Plastics Pipe Selection, Handling, Storage and Installation for Potable Water Supplies - Code of Practice : Part 3 - Laying and Jointing of UPVC Pipes | |
| IS 7834-1 (pdf) IS 7834-1 (txt) | 1987 | injection moulded PVC socket fittings with solvent cement joints for water supplies, Part 1: General requirements | |
| IS 7834-2 (pdf) | 1987 | injection moulded PVC socket fittings with solvent cement joints for water supplies, Part 2: Specific requirements for 45 degrees elbows | |
| IS 7834-3 (pdf) | 1987 | injection moulded PVC socket fittings with solvent cement joints for water supplies, Part 3: Specific requirements for 90 degree elbows | |
| IS 7834-4 (pdf) | 1987 | injection moulded PVC socket fittings with solvent cement joints for water supplies, Part 4: Specific requirements for 90 degree tees | |
| IS 7834-5 (pdf) | 1987 | Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies, Part 5: Specific Requirements for 45 degree Tees | |
| IS 7834-6 (pdf) | 1987 | injection moulded PVC socket fittings with solvent cement joints for water supplies, Part 6: Specific requirements for sockets | |
| IS 7834-7 (pdf) | 1987 | injection moulded PVC socket fittings with solvent cement joints for water supplies, Part 7: Specific requirements for unions | |
| IS 7834-8 (pdf) | 1987 | injection moulded PVC socket fittings with solvent cement joints for water supplies, Part 8: Specific requirements for caps | |
| IS 8008-1 (pdf) IS 8008-1 (txt) | 2003 | Injection Moulded/Machined High Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 1: General Requirements for Fittings | |
| IS 8008-2 (pdf) | 2003 | Injection Moulded/Machined High Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 2: Specific Requirements for 90° Bends | |
| IS 8008-3 (pdf) | 2003 | Injection Moulded/Machined High Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 3: Specific Requirements for 90° TEES | |
| IS 8008-4 (pdf) IS 8008-4 (txt) | 2003 | Injection Moulded/Machined High Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 4: Specific Requirements for Reducers | |
| IS 8008-5 (pdf) | 2003 | Injection Moulded/Machined High Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 5: Specific Requirements for Ferrule Reducers | |
| IS 8008-6 (pdf) IS 8008-6 (txt) | 2003 | Injection Moulded/Machined High Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 6: Specific Requirements for Pipe Ends | |
| IS 8008-7 (pdf) | 2003 | Injection Moulded/Machined High Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 7: Specific Requirements for Sandwich Flanges | |
| IS 8008-8 (pdf) | 2003 | Injection Moulded/Machined High Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 8: Specific Requirements for Reducing Tees | |
| IS 8008-9 (pdf) | 2003 | Injection Moulded/Machined High Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 9: Specific Requirements for Ends Caps | |
| IS 8360-1 (pdf) IS 8360-1 (txt) | 1977 | fabricated high density polyethylene (HDPE) fittings for potable water supplies, Part 1: General requirements | |
| IS 8360-2 (pdf) IS 8360-2 (txt) | 1977 | fabricated high density polyethylene (MDPE) fittings for potable water supplies, Part 2 Specific requirements for 90 degree tees | |
| IS 8360-3 (pdf) IS 8360-3 (txt) | 1977 | fabricated high density polyethylene (HDPE) fittings for potable water supplies, Part 3 Specifc requirements for 90 degree bends | |
| IS 9271 (pdf) IS 9271 (txt) | 2004 | Unplasticized Polyvinyl Chloride (UPVC) Single Wall Corrugated Pipes for Drainage - | |
| IS 10124-1 (pdf) IS 10124-1 (txt) | 2009 | Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 1: General Requirements | |
| IS 10124-2 (pdf) IS 10124-2 (txt) | 2009 | Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 2: Specific Requirements for Sockets | |
| IS 10124-3 (pdf) IS 10124-3 (txt) | 2009 | Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 3: Specific Requirements for Straight Reducers | |
| IS 10124-4 (pdf) | 2009 | Fabricated PVC- U Fittings for Potable Water Supplies - Specification, Part 4: Specific Requirements for Caps | |
| IS 10124-5 (pdf) | 2009 | Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 5: Specific Requirements for Equal Tees | |
| IS 10124-6 (pdf) IS 10124-6 (txt) | 2009 | Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 6: Specific Requirements for Flanged Tail Pieces with Metallic Flanges | |
| IS 10124-7 (pdf) IS 10124-7 (txt) | 2009 | Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 7: Specific Requirements for Threaded Adaptors | |
| IS 10124-8 (pdf) IS 10124-8 (txt) | 2009 | Fabricated PVC-U fittings for Potable Water Supplies, Part 8: Specific Requirements for 90 degree Bends | |
| IS 10124-9 (pdf) IS 10124-9 (txt) | 2009 | Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 9: Specific Requirements for 60 o Bends | |
| IS 10124-10 (pdf) IS 10124-10 (txt) | 2009 | Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 10: Specific Requirements for 45o Bends | |
| IS 10124-11 (pdf) IS 10124-11 (txt) | 2009 | Fabricated PVC-U fittings for Potable Water Supplies, Part 11: Specific Requirements for 30 degree Bends | |
| IS 10124-12 (pdf) IS 10124-12 (txt) | 2009 | Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 12: Specific Requirements for 22 ½o Bends | |
| IS 10124-13 (pdf) IS 10124-13 (txt) | 2009 | Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11¼oBends, Part 12: SPECIFIC REQUIREMENTS FOR 22 ½o BENDS | |
| IS 12231 (pdf) IS 12231 (txt) | 1987 | Unplasticized PVC Pipes for Use in Suction and Delivery Lines of Agricultural Pump Sets | |
| IS 12235-1 to 19 (pdf) IS 12235-1 to 19 (txt) | 2004 | Thermoplastics Pipes and Fittings - Methods of Test | |
| IS 12709 (pdf) IS 12709 (txt) | 1994 | glass-fibre reinforced plastic (GRP) pipes joints and fittings for use for potable water supply | |
| IS 12818 (pdf) IS 12818 (txt) | 2010 | unplasticized polyvinyl chloride (PVC-U)screen and casing pipes for bore/tubewell | |
| IS 13592 (pdf) IS 13592 (txt) | 1992 | UPVC pipes for soil and waste discharge systems inside buildings including ventilation and rainwater system | |
| IS 13592 (pdf) IS 13592 (txt) | 2013 | Unplasticized Polyvinyl Chloride (PVC-U) pipes for soil and waste discharge systems inside buildings including ventilation and rainwater system | |
| IS 13593 (pdf) IS 13593 (txt) | 1992 | UPVC pipe fittings to be used with the UPVC pipes in the suction and delivery lines of agricultural pumps | |
| IS 13916 (pdf) IS 13916 (txt) | 1994 | Code of practice for installation of glass fibre reinforced plastic (GRP) piping system | |
| IS 14333 (pdf) IS 14333 (txt) | 1996 | High density polyethylene pipe for sewerage - | |
| IS 14402 (pdf) IS 14402 (txt) | 1996 | GRP pipes joints and fittings for use sewerage, industrial waste and water (other than potable) | |
| IS 14735 (pdf) IS 14735 (txt) | 1999 | Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System - | |
| IS 14787 (pdf) IS 14787 (txt) | 2000 | Unplasticized PVC Pipes (Ducts) and Fittings for Underground Telecommunications Cable Installation - | |
| IS 14885 (pdf) IS 14885 (txt) | 2001 | Polyethylene Pipes for the Supply of Gaseous Fuels - | |
| IS 15265 (pdf) IS 15265 (txt) | 2003 | Flexible PVC Pipes or Polymer Reinforced Thermoplastic Hoses for Suction and Delivery Lines of Agricultural Pumps - Specification | |
| IS 15328 (pdf) IS 15328 (txt) | 2003 | Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems - | |
| IS 15450 (pdf) IS 15450 (txt) | 2004 | Polyethylene/ Aluminium/ Polyethylene Composite Pressure Pipes for Hot and Cold Water Supplies - | |
| IS 15778 (pdf) IS 15778 (txt) | 2007 | Chlorinated polyvinyl chloride (CPVC) pipes for potabvle hot and cold water distribution supplies - | |
| IS 15801 (pdf) IS 15801 (txt) | 2008 | Polypropylene-random copolymer pipes for hot and cold water supplies - | |
| IS 15927-1 (pdf) IS 15927-1 (txt) | 2012 | Polyethylene Fittings for use with Polyethylene Pipes for the Supply of Gaseous Fuels - Specification, Part 1: Fittings for Socket Fusion using Heated Tools | |
| IS 15927-2 (pdf) IS 15927-2 (txt) | 2012 | Polyethylene Fittings for use with Polyethylene Pipes for the supply of Gaseous Fuels - Specification, Part 2: Spigot Fittings for Butt Fusion for Socket Fusion using Heated Tools and for use with Electro Fusion Fittings | |
| IS 15927-3 (pdf) IS 15927-3 (txt) | 2011 | Polyethylene Fittings for use with Polyethylene Pipes for the Supply of Gaseous Fuels, Part 3: Electro Fusion Fittings | |
| IS 16098-1 (pdf) IS 16098-1 (txt) | 2013 | Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewarage - Specification, Part 1: Pipes and Fittings with Smooth External Surface, Type A | |
| IS 16098-2 (pdf) IS 16098-2 (txt) | 2013 | Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewarage - Specification, Part 2: Pipes and Fittings with Non-Smooth External Surface, Type B | |
| SP 57 (pdf) SP 57 (txt) | 1993 | Handbook on Pipes and Fittings for Drinking Water Supply |
Last Updated: December 21, 2016
↑